! Started logfile: J0334-4008_S_2017_07_16_pus_uvs.log on Thu May 9 11:00:33 2019 obs J0334-4008_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_07_16_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.288889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.354697Jy sigma=0.002304 ! Fit after self-cal, rms=0.233710Jy sigma=0.001508 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.296 mas, bmaj=7.781 mas, bpa=0.2831 degrees ! Estimated noise=7653.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.888652 Jy ! Component: 100 - total flux cleaned = 1.09276 Jy ! Total flux subtracted in 100 components = 1.09276 Jy ! Clean residual min=-0.045531 max=0.077636 Jy/beam ! Clean residual mean=-0.001156 rms=0.016648 Jy/beam ! Combined flux in latest and established models = 1.09276 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.09276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178776Jy sigma=0.001139 ! Fit after self-cal, rms=0.178717Jy sigma=0.001139 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=7.233 mas, bpa=1.771 degrees ! Estimated noise=4794.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102928 Jy ! Component: 100 - total flux cleaned = 0.152835 Jy ! Component: 150 - total flux cleaned = 0.178109 Jy ! Component: 200 - total flux cleaned = 0.191127 Jy ! Total flux subtracted in 200 components = 0.191127 Jy ! Clean residual min=-0.018195 max=0.015403 Jy/beam ! Clean residual mean=-0.000454 rms=0.004655 Jy/beam ! Combined flux in latest and established models = 1.28388 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 1.28388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112599Jy sigma=0.000712 ! Fit after self-cal, rms=0.112532Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 1.01 MK 1.00 NL 1.00* OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.95 MK 1.02 NL 1.00* OV 1.03 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 1.00* MK 1.01 NL 1.00* OV 0.94 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.112532Jy sigma=0.000712 ! Fit after self-cal, rms=0.100649Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=7.19 mas, bpa=1.521 degrees ! Estimated noise=4835.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119698 Jy ! Component: 100 - total flux cleaned = -0.00128587 Jy ! Component: 150 - total flux cleaned = -0.00121582 Jy ! Component: 200 - total flux cleaned = -0.00115233 Jy ! Total flux subtracted in 200 components = -0.00115233 Jy ! Clean residual min=-0.010017 max=0.009575 Jy/beam ! Clean residual mean=-0.000121 rms=0.002926 Jy/beam ! Combined flux in latest and established models = 1.28273 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 1.28273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100459Jy sigma=0.000638 ! Fit after self-cal, rms=0.100454Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100454Jy sigma=0.000638 ! Fit after self-cal, rms=0.099915Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=7.193 mas, bpa=1.518 degrees ! Estimated noise=4835.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108657 Jy ! Component: 100 - total flux cleaned = -0.00137445 Jy ! Component: 150 - total flux cleaned = -0.00161066 Jy ! Component: 200 - total flux cleaned = -0.00171246 Jy ! Total flux subtracted in 200 components = -0.00171246 Jy ! Clean residual min=-0.010020 max=0.009742 Jy/beam ! Clean residual mean=-0.000128 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 1.28102 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 1.28102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099867Jy sigma=0.000634 ! Fit after self-cal, rms=0.099865Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154236 Jy ! Component: 100 - total flux cleaned = 9.5414e-05 Jy ! Component: 150 - total flux cleaned = 1.69973e-05 Jy ! Component: 200 - total flux cleaned = -7.71027e-06 Jy ! Total flux subtracted in 200 components = -7.71027e-06 Jy ! Clean residual min=-0.010102 max=0.009652 Jy/beam ! Clean residual mean=-0.000128 rms=0.002912 Jy/beam ! Combined flux in latest and established models = 1.28101 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 1.28101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099849Jy sigma=0.000634 ! Fit after self-cal, rms=0.099849Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099849Jy sigma=0.000634 ! Fit after self-cal, rms=0.098791Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=7.192 mas, bpa=1.515 degrees ! Estimated noise=4835.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252317 Jy ! Component: 100 - total flux cleaned = 0.000248124 Jy ! Component: 150 - total flux cleaned = 0.000269519 Jy ! Component: 200 - total flux cleaned = 0.000292958 Jy ! Total flux subtracted in 200 components = 0.000292958 Jy ! Clean residual min=-0.009256 max=0.009933 Jy/beam ! Clean residual mean=-0.000114 rms=0.002864 Jy/beam ! Combined flux in latest and established models = 1.2813 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 1.2813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098778Jy sigma=0.000627 ! Fit after self-cal, rms=0.098779Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.81018e-05 Jy ! Component: 100 - total flux cleaned = 3.41884e-05 Jy ! Component: 150 - total flux cleaned = 3.22504e-05 Jy ! Component: 200 - total flux cleaned = 3.28608e-05 Jy ! Total flux subtracted in 200 components = 3.28608e-05 Jy ! Clean residual min=-0.009290 max=0.009835 Jy/beam ! Clean residual mean=-0.000114 rms=0.002859 Jy/beam ! Combined flux in latest and established models = 1.28134 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 1.28134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098770Jy sigma=0.000627 ! Fit after self-cal, rms=0.098770Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098770Jy sigma=0.000627 ! Fit after self-cal, rms=0.098773Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.363 mas, bmaj=26.47 mas, bpa=-2.784 degrees ! Estimated noise=7270.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665179 Jy ! Component: 100 - total flux cleaned = 0.000667584 Jy ! Component: 150 - total flux cleaned = 0.000668664 Jy ! Component: 200 - total flux cleaned = 0.000669883 Jy ! Total flux subtracted in 200 components = 0.000669883 Jy ! Clean residual min=-0.014359 max=0.011354 Jy/beam ! Clean residual mean=-0.000284 rms=0.005535 Jy/beam ! Combined flux in latest and established models = 1.28201 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 1.28201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098784Jy sigma=0.000627 ! Fit after self-cal, rms=0.098779Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.49517e-05 Jy ! Component: 100 - total flux cleaned = 5.56867e-05 Jy ! Component: 150 - total flux cleaned = 5.61219e-05 Jy ! Component: 200 - total flux cleaned = 5.64504e-05 Jy ! Total flux subtracted in 200 components = 5.64504e-05 Jy ! Clean residual min=-0.014351 max=0.011351 Jy/beam ! Clean residual mean=-0.000282 rms=0.005528 Jy/beam ! Combined flux in latest and established models = 1.28206 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 1.28206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098799Jy sigma=0.000628 ! Fit after self-cal, rms=0.098796Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=7.192 mas, bpa=1.515 degrees ! Estimated noise=4836.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.461 x 7.192 at 1.515 degrees (North through East) ! Clean map min=-0.0090474 max=1.1502 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098796Jy sigma=0.000628 ! Fit after self-cal, rms=0.085696Jy sigma=0.000540 ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=7.193 mas, bpa=1.5 degrees ! Estimated noise=4840.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466541 Jy ! Component: 100 - total flux cleaned = 0.000389055 Jy ! Component: 150 - total flux cleaned = 0.000364635 Jy ! Component: 200 - total flux cleaned = 0.000342995 Jy ! Total flux subtracted in 200 components = 0.000342995 Jy ! Clean residual min=-0.009127 max=0.009709 Jy/beam ! Clean residual mean=-0.000120 rms=0.002831 Jy/beam ! Combined flux in latest and established models = 1.28241 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 1.28241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085674Jy sigma=0.000540 ! Fit after self-cal, rms=0.085676Jy sigma=0.000540 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.87992e-05 Jy ! Component: 100 - total flux cleaned = 7.52579e-06 Jy ! Component: 150 - total flux cleaned = 8.17729e-06 Jy ! Component: 200 - total flux cleaned = 8.93476e-06 Jy ! Total flux subtracted in 200 components = 8.93476e-06 Jy ! Clean residual min=-0.009146 max=0.009636 Jy/beam ! Clean residual mean=-0.000119 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 1.28241 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 1.28241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085665Jy sigma=0.000540 ! Fit after self-cal, rms=0.085666Jy sigma=0.000540 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085666Jy sigma=0.000540 ! Fit after self-cal, rms=0.085628Jy sigma=0.000540 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.3 mas, bmaj=7.774 mas, bpa=0.2882 degrees ! Estimated noise=8506.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.889157 Jy ! Component: 100 - total flux cleaned = 1.09358 Jy ! Component: 150 - total flux cleaned = 1.18084 Jy ! Component: 200 - total flux cleaned = 1.22794 Jy ! Total flux subtracted in 200 components = 1.22794 Jy ! Clean residual min=-0.021075 max=0.024059 Jy/beam ! Clean residual mean=-0.000355 rms=0.006416 Jy/beam ! Combined flux in latest and established models = 1.22794 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.22794 Jy ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=7.192 mas, bpa=1.501 degrees ! Estimated noise=4839.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291026 Jy ! Component: 100 - total flux cleaned = 0.0434201 Jy ! Component: 150 - total flux cleaned = 0.0507034 Jy ! Component: 200 - total flux cleaned = 0.0534986 Jy ! Total flux subtracted in 200 components = 0.0534986 Jy ! Clean residual min=-0.009940 max=0.010291 Jy/beam ! Clean residual mean=-0.000128 rms=0.002983 Jy/beam ! Combined flux in latest and established models = 1.28143 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 1.28143 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.362 mas, bmaj=26.47 mas, bpa=-2.796 degrees ! Estimated noise=7277.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157524 Jy ! Component: 100 - total flux cleaned = 0.00161891 Jy ! Component: 150 - total flux cleaned = 0.00162165 Jy ! Component: 200 - total flux cleaned = 0.0016609 Jy ! Total flux subtracted in 200 components = 0.0016609 Jy ! Clean residual min=-0.014134 max=0.011293 Jy/beam ! Clean residual mean=-0.000295 rms=0.005588 Jy/beam ! Combined flux in latest and established models = 1.2831 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.80756e-06 Jy ! Component: 100 - total flux cleaned = 3.81903e-05 Jy ! Component: 150 - total flux cleaned = 4.0013e-05 Jy ! Component: 200 - total flux cleaned = 7.35391e-05 Jy ! Total flux subtracted in 200 components = 7.35391e-05 Jy ! Clean residual min=-0.014137 max=0.011285 Jy/beam ! Clean residual mean=-0.000294 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 1.28317 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 29 components and 1.28317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=7.192 mas, bpa=1.501 degrees ! Estimated noise=4839.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164797 Jy ! Component: 100 - total flux cleaned = 0.000167906 Jy ! Component: 150 - total flux cleaned = 0.000221985 Jy ! Component: 200 - total flux cleaned = 0.000219624 Jy ! Total flux subtracted in 200 components = 0.000219624 Jy ! Clean residual min=-0.009288 max=0.010261 Jy/beam ! Clean residual mean=-0.000112 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 1.28339 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 1.28339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085778Jy sigma=0.000541 ! Fit after self-cal, rms=0.085775Jy sigma=0.000540 wmodel J0334-4008_S_2017_07_16_pus_map.mod ! Writing 37 model components to file: J0334-4008_S_2017_07_16_pus_map.mod wobs J0334-4008_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_07_16_pus_uvs.fits wwins J0334-4008_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0334-4008_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168498 Jy ! Component: 100 - total flux cleaned = 0.00228648 Jy ! Component: 150 - total flux cleaned = 0.00269528 Jy ! Component: 200 - total flux cleaned = 0.00233035 Jy ! Component: 250 - total flux cleaned = 0.0019954 Jy ! Component: 300 - total flux cleaned = 0.00168223 Jy ! Component: 350 - total flux cleaned = 0.00129095 Jy ! Component: 400 - total flux cleaned = 0.000916954 Jy ! Component: 450 - total flux cleaned = 0.000916952 Jy ! Component: 500 - total flux cleaned = 0.00074956 Jy ! Component: 550 - total flux cleaned = 0.000749863 Jy ! Component: 600 - total flux cleaned = 0.000596767 Jy ! Component: 650 - total flux cleaned = 0.000377555 Jy ! Component: 700 - total flux cleaned = 0.000309321 Jy ! Component: 750 - total flux cleaned = 3.77697e-05 Jy ! Component: 800 - total flux cleaned = -0.000294457 Jy ! Component: 850 - total flux cleaned = -0.000488029 Jy ! Component: 900 - total flux cleaned = -0.00100076 Jy ! Component: 950 - total flux cleaned = -0.00144382 Jy ! Component: 1000 - total flux cleaned = -0.00188393 Jy ! Component: 1050 - total flux cleaned = -0.00238429 Jy ! Component: 1100 - total flux cleaned = -0.00288393 Jy ! Component: 1150 - total flux cleaned = -0.00331991 Jy ! Component: 1200 - total flux cleaned = -0.00375673 Jy ! Component: 1250 - total flux cleaned = -0.00419413 Jy ! Component: 1300 - total flux cleaned = -0.00463303 Jy ! Component: 1350 - total flux cleaned = -0.0048844 Jy ! Component: 1400 - total flux cleaned = -0.00488363 Jy ! Component: 1450 - total flux cleaned = -0.00494872 Jy ! Component: 1500 - total flux cleaned = -0.00494913 Jy ! Component: 1550 - total flux cleaned = -0.00488006 Jy ! Component: 1600 - total flux cleaned = -0.00488058 Jy ! Component: 1650 - total flux cleaned = -0.00480758 Jy ! Component: 1700 - total flux cleaned = -0.00480542 Jy ! Component: 1750 - total flux cleaned = -0.00480683 Jy ! Component: 1800 - total flux cleaned = -0.00480775 Jy ! Component: 1850 - total flux cleaned = -0.00472503 Jy ! Component: 1900 - total flux cleaned = -0.00480937 Jy ! Component: 1950 - total flux cleaned = -0.00472147 Jy ! Component: 2000 - total flux cleaned = -0.00472006 Jy ! Component: 2050 - total flux cleaned = -0.00471936 Jy ! Component: 2100 - total flux cleaned = -0.00472008 Jy ! Component: 2150 - total flux cleaned = -0.00462003 Jy ! Component: 2200 - total flux cleaned = -0.00461873 Jy ! Component: 2250 - total flux cleaned = -0.00461719 Jy ! Component: 2300 - total flux cleaned = -0.00450848 Jy ! Component: 2350 - total flux cleaned = -0.00451048 Jy ! Component: 2400 - total flux cleaned = -0.00438978 Jy ! Component: 2450 - total flux cleaned = -0.00439155 Jy ! Component: 2500 - total flux cleaned = -0.00426512 Jy ! Component: 2550 - total flux cleaned = -0.00426436 Jy ! Component: 2600 - total flux cleaned = -0.00412844 Jy ! Component: 2650 - total flux cleaned = -0.00412596 Jy ! Component: 2700 - total flux cleaned = -0.00398281 Jy ! Component: 2750 - total flux cleaned = -0.00383553 Jy ! Component: 2800 - total flux cleaned = -0.0035272 Jy ! Component: 2850 - total flux cleaned = -0.00336657 Jy ! Component: 2900 - total flux cleaned = -0.00303492 Jy ! Component: 2950 - total flux cleaned = -0.00286292 Jy ! Component: 3000 - total flux cleaned = -0.00268109 Jy ! Component: 3050 - total flux cleaned = -0.00231467 Jy ! Component: 3100 - total flux cleaned = -0.00231491 Jy ! Component: 3150 - total flux cleaned = -0.00172542 Jy ! Component: 3200 - total flux cleaned = -0.00172169 Jy ! Component: 3250 - total flux cleaned = -0.0010933 Jy ! Component: 3300 - total flux cleaned = -0.00087707 Jy ! Component: 3350 - total flux cleaned = -0.000657413 Jy ! Component: 3400 - total flux cleaned = 4.10475e-05 Jy ! Component: 3450 - total flux cleaned = 0.000287623 Jy ! Component: 3500 - total flux cleaned = 0.000540915 Jy ! Component: 3550 - total flux cleaned = 0.00105777 Jy ! Component: 3600 - total flux cleaned = 0.00159247 Jy ! Component: 3650 - total flux cleaned = 0.00215706 Jy ! Component: 3700 - total flux cleaned = 0.00273494 Jy ! Component: 3750 - total flux cleaned = 0.00333938 Jy ! Component: 3800 - total flux cleaned = 0.00364739 Jy ! Component: 3850 - total flux cleaned = 0.00428598 Jy ! Component: 3900 - total flux cleaned = 0.00528811 Jy ! Component: 3950 - total flux cleaned = 0.00563101 Jy ! Component: 4000 - total flux cleaned = 0.00670735 Jy ! Component: 4050 - total flux cleaned = 0.00745405 Jy ! Total flux subtracted in 4096 components = 0.00783799 Jy ! Clean residual min=-0.024390 max=0.022900 Jy/beam ! Clean residual mean=0.000402 rms=0.006127 Jy/beam ! Combined flux in latest and established models = 1.29123 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 181 components and 1.29123 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.46 x 7.192 at 1.501 degrees (North through East) ! Clean map min=-0.032807 max=1.1444 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.14438 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00676047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.77226 1.77226 3.54452 7.08904 14.1781 28.3562 56.7123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0202 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.46 x 7.192 at 1.501 degrees (North through East) ! Clean map min=-0.032807 max=1.1444 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:00:38 2019