! Started logfile: J0334-4008_S_2017_07_09_pus_uvs.log on Wed May 8 14:40:49 2019 obs J0334-4008_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_07_09_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.441026 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.512081Jy sigma=0.003416 ! Fit after self-cal, rms=0.334429Jy sigma=0.002211 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.171 mas, bmaj=6.75 mas, bpa=-6.91 degrees ! Estimated noise=4836.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.970863 Jy ! Component: 100 - total flux cleaned = 1.19331 Jy ! Total flux subtracted in 100 components = 1.19331 Jy ! Clean residual min=-0.054261 max=0.087419 Jy/beam ! Clean residual mean=-0.000192 rms=0.017566 Jy/beam ! Combined flux in latest and established models = 1.19331 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.19331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190424Jy sigma=0.001236 ! Fit after self-cal, rms=0.190389Jy sigma=0.001236 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.675 mas, bpa=-7.965 degrees ! Estimated noise=3632.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11168 Jy ! Component: 100 - total flux cleaned = 0.161353 Jy ! Component: 150 - total flux cleaned = 0.184568 Jy ! Component: 200 - total flux cleaned = 0.195441 Jy ! Total flux subtracted in 200 components = 0.195441 Jy ! Clean residual min=-0.019046 max=0.020929 Jy/beam ! Clean residual mean=-0.000218 rms=0.005610 Jy/beam ! Combined flux in latest and established models = 1.38875 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 1.38875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117098Jy sigma=0.000763 ! Fit after self-cal, rms=0.117001Jy sigma=0.000762 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.02 ! LA 1.00 MK 1.00 NL 1.00* OV 1.01 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.98 ! LA 0.96 MK 1.01 NL 1.00* OV 1.06 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.98 ! LA 0.96 MK 1.03 NL 1.00* OV 0.95 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 0.89 MK 0.94 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.117001Jy sigma=0.000762 ! Fit after self-cal, rms=0.098325Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=7.679 mas, bpa=-7.995 degrees ! Estimated noise=3627.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000849634 Jy ! Component: 100 - total flux cleaned = 0.000676867 Jy ! Component: 150 - total flux cleaned = 0.000595198 Jy ! Component: 200 - total flux cleaned = 0.000525612 Jy ! Total flux subtracted in 200 components = 0.000525612 Jy ! Clean residual min=-0.008187 max=0.010419 Jy/beam ! Clean residual mean=-0.000013 rms=0.002486 Jy/beam ! Combined flux in latest and established models = 1.38928 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 1.38928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098191Jy sigma=0.000652 ! Fit after self-cal, rms=0.098144Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098144Jy sigma=0.000652 ! Fit after self-cal, rms=0.098146Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=7.678 mas, bpa=-7.998 degrees ! Estimated noise=3627.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641435 Jy ! Component: 100 - total flux cleaned = 0.000568244 Jy ! Component: 150 - total flux cleaned = 0.000444415 Jy ! Component: 200 - total flux cleaned = 0.00038182 Jy ! Total flux subtracted in 200 components = 0.00038182 Jy ! Clean residual min=-0.007933 max=0.010457 Jy/beam ! Clean residual mean=-0.000014 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 1.38966 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 1.38966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098055Jy sigma=0.000651 ! Fit after self-cal, rms=0.098047Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-97.5, 82). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834624 Jy ! Component: 100 - total flux cleaned = 0.00932014 Jy ! Component: 150 - total flux cleaned = 0.0102694 Jy ! Component: 200 - total flux cleaned = 0.0105985 Jy ! Total flux subtracted in 200 components = 0.0105985 Jy ! Clean residual min=-0.007676 max=0.006746 Jy/beam ! Clean residual mean=-0.000074 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 1.40026 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 1.40026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097338Jy sigma=0.000647 ! Fit after self-cal, rms=0.097318Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097318Jy sigma=0.000647 ! Fit after self-cal, rms=0.097228Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.677 mas, bpa=-8.001 degrees ! Estimated noise=3625.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014798 Jy ! Component: 100 - total flux cleaned = 0.00155142 Jy ! Component: 150 - total flux cleaned = 0.0015437 Jy ! Component: 200 - total flux cleaned = 0.00146946 Jy ! Total flux subtracted in 200 components = 0.00146946 Jy ! Clean residual min=-0.007345 max=0.006064 Jy/beam ! Clean residual mean=-0.000073 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 1.40173 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 1.40173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097115Jy sigma=0.000646 ! Fit after self-cal, rms=0.097113Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030624 Jy ! Component: 100 - total flux cleaned = 0.000361228 Jy ! Component: 150 - total flux cleaned = 0.000354218 Jy ! Component: 200 - total flux cleaned = 0.000346833 Jy ! Total flux subtracted in 200 components = 0.000346833 Jy ! Clean residual min=-0.007227 max=0.005735 Jy/beam ! Clean residual mean=-0.000072 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 1.40207 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 1.40207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097045Jy sigma=0.000645 ! Fit after self-cal, rms=0.097044Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097044Jy sigma=0.000645 ! Fit after self-cal, rms=0.097032Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=29.73 mas, bpa=-4.22 degrees ! Estimated noise=5022.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.95013e-05 Jy ! Component: 100 - total flux cleaned = 5.81812e-05 Jy ! Component: 150 - total flux cleaned = 0.000225562 Jy ! Component: 200 - total flux cleaned = 0.00033339 Jy ! Total flux subtracted in 200 components = 0.00033339 Jy ! Clean residual min=-0.007341 max=0.007830 Jy/beam ! Clean residual mean=-0.000150 rms=0.002584 Jy/beam ! Combined flux in latest and established models = 1.40241 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 59 components and 1.40241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096979Jy sigma=0.000645 ! Fit after self-cal, rms=0.096974Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.59234e-06 Jy ! Component: 100 - total flux cleaned = -8.12039e-06 Jy ! Component: 150 - total flux cleaned = -1.09053e-05 Jy ! Component: 200 - total flux cleaned = -6.10312e-05 Jy ! Total flux subtracted in 200 components = -6.10312e-05 Jy ! Clean residual min=-0.007324 max=0.007695 Jy/beam ! Clean residual mean=-0.000150 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 1.40235 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 59 components and 1.40235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096936Jy sigma=0.000645 ! Fit after self-cal, rms=0.096933Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.676 mas, bpa=-8.005 degrees ! Estimated noise=3625.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.676 at -8.005 degrees (North through East) ! Clean map min=-0.0067858 max=1.2633 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096933Jy sigma=0.000645 ! Fit after self-cal, rms=0.087406Jy sigma=0.000580 ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.675 mas, bpa=-8.001 degrees ! Estimated noise=3625.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25976e-05 Jy ! Component: 100 - total flux cleaned = -6.03349e-05 Jy ! Component: 150 - total flux cleaned = -0.000107471 Jy ! Component: 200 - total flux cleaned = -0.00010882 Jy ! Total flux subtracted in 200 components = -0.00010882 Jy ! Clean residual min=-0.006847 max=0.005489 Jy/beam ! Clean residual mean=-0.000079 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 1.40224 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 1.40224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087354Jy sigma=0.000579 ! Fit after self-cal, rms=0.087354Jy sigma=0.000579 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.81945e-06 Jy ! Component: 100 - total flux cleaned = -3.61702e-05 Jy ! Component: 150 - total flux cleaned = 1.12005e-06 Jy ! Component: 200 - total flux cleaned = -7.63725e-05 Jy ! Total flux subtracted in 200 components = -7.63725e-05 Jy ! Clean residual min=-0.006822 max=0.005439 Jy/beam ! Clean residual mean=-0.000078 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 1.40216 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 1.40216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087319Jy sigma=0.000579 ! Fit after self-cal, rms=0.087318Jy sigma=0.000579 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087318Jy sigma=0.000579 ! Fit after self-cal, rms=0.087314Jy sigma=0.000579 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=6.726 mas, bpa=-7.034 degrees ! Estimated noise=4805.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.964439 Jy ! Component: 100 - total flux cleaned = 1.18466 Jy ! Component: 150 - total flux cleaned = 1.27622 Jy ! Component: 200 - total flux cleaned = 1.32579 Jy ! Total flux subtracted in 200 components = 1.32579 Jy ! Clean residual min=-0.017667 max=0.024116 Jy/beam ! Clean residual mean=-0.000055 rms=0.005618 Jy/beam ! Combined flux in latest and established models = 1.32579 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.32579 Jy ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.675 mas, bpa=-8.006 degrees ! Estimated noise=3625.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37.5, -117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346317 Jy ! Component: 100 - total flux cleaned = 0.0510724 Jy ! Component: 150 - total flux cleaned = 0.061458 Jy ! Component: 200 - total flux cleaned = 0.0684699 Jy ! Total flux subtracted in 200 components = 0.0684699 Jy ! Clean residual min=-0.007884 max=0.006470 Jy/beam ! Clean residual mean=-0.000084 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 1.39426 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 65 components and 1.39426 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=29.72 mas, bpa=-4.218 degrees ! Estimated noise=5023.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063478 Jy ! Component: 100 - total flux cleaned = 0.00957796 Jy ! Component: 150 - total flux cleaned = 0.0114942 Jy ! Component: 200 - total flux cleaned = 0.0121997 Jy ! Total flux subtracted in 200 components = 0.0121997 Jy ! Clean residual min=-0.007908 max=0.006127 Jy/beam ! Clean residual mean=-0.000147 rms=0.002561 Jy/beam ! Combined flux in latest and established models = 1.40646 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226534 Jy ! Component: 100 - total flux cleaned = 0.00032357 Jy ! Component: 150 - total flux cleaned = 0.000354466 Jy ! Component: 200 - total flux cleaned = 0.0004087 Jy ! Total flux subtracted in 200 components = 0.0004087 Jy ! Clean residual min=-0.008168 max=0.006163 Jy/beam ! Clean residual mean=-0.000144 rms=0.002555 Jy/beam ! Combined flux in latest and established models = 1.40687 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 89 components and 1.40687 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.753 mas, bmaj=7.675 mas, bpa=-8.006 degrees ! Estimated noise=3625.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170278 Jy ! Component: 100 - total flux cleaned = 1.01592e-05 Jy ! Component: 150 - total flux cleaned = -0.00013679 Jy ! Component: 200 - total flux cleaned = -0.00026998 Jy ! Total flux subtracted in 200 components = -0.00026998 Jy ! Clean residual min=-0.006928 max=0.005968 Jy/beam ! Clean residual mean=-0.000063 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 1.4066 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 1.4066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087397Jy sigma=0.000579 ! Fit after self-cal, rms=0.087336Jy sigma=0.000579 wmodel J0334-4008_S_2017_07_09_pus_map.mod ! Writing 111 model components to file: J0334-4008_S_2017_07_09_pus_map.mod wobs J0334-4008_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_07_09_pus_uvs.fits wwins J0334-4008_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0334-4008_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00293162 Jy ! Component: 100 - total flux cleaned = -0.00411269 Jy ! Component: 150 - total flux cleaned = -0.00386176 Jy ! Component: 200 - total flux cleaned = -0.00330055 Jy ! Component: 250 - total flux cleaned = -0.00285131 Jy ! Component: 300 - total flux cleaned = -0.0022873 Jy ! Component: 350 - total flux cleaned = -0.00182268 Jy ! Component: 400 - total flux cleaned = -0.00106605 Jy ! Component: 450 - total flux cleaned = -0.000642553 Jy ! Component: 500 - total flux cleaned = -0.000124035 Jy ! Component: 550 - total flux cleaned = 0.000206056 Jy ! Component: 600 - total flux cleaned = 0.000419337 Jy ! Component: 650 - total flux cleaned = 0.000728387 Jy ! Component: 700 - total flux cleaned = 0.00092691 Jy ! Component: 750 - total flux cleaned = 0.00116728 Jy ! Component: 800 - total flux cleaned = 0.00130593 Jy ! Component: 850 - total flux cleaned = 0.00152881 Jy ! Component: 900 - total flux cleaned = 0.00161654 Jy ! Component: 950 - total flux cleaned = 0.00161689 Jy ! Component: 1000 - total flux cleaned = 0.00165916 Jy ! Component: 1050 - total flux cleaned = 0.00170049 Jy ! Component: 1100 - total flux cleaned = 0.00174036 Jy ! Component: 1150 - total flux cleaned = 0.00178006 Jy ! Component: 1200 - total flux cleaned = 0.00177894 Jy ! Component: 1250 - total flux cleaned = 0.00177968 Jy ! Component: 1300 - total flux cleaned = 0.00177987 Jy ! Component: 1350 - total flux cleaned = 0.00173609 Jy ! Component: 1400 - total flux cleaned = 0.00173557 Jy ! Component: 1450 - total flux cleaned = 0.0017818 Jy ! Component: 1500 - total flux cleaned = 0.00183269 Jy ! Component: 1550 - total flux cleaned = 0.00183376 Jy ! Component: 1600 - total flux cleaned = 0.00189077 Jy ! Component: 1650 - total flux cleaned = 0.00189036 Jy ! Component: 1700 - total flux cleaned = 0.00195462 Jy ! Component: 1750 - total flux cleaned = 0.00195383 Jy ! Component: 1800 - total flux cleaned = 0.00202796 Jy ! Component: 1850 - total flux cleaned = 0.00210746 Jy ! Component: 1900 - total flux cleaned = 0.0021076 Jy ! Component: 1950 - total flux cleaned = 0.00210795 Jy ! Component: 2000 - total flux cleaned = 0.00220354 Jy ! Component: 2050 - total flux cleaned = 0.00220491 Jy ! Component: 2100 - total flux cleaned = 0.00220453 Jy ! Component: 2150 - total flux cleaned = 0.00232412 Jy ! Component: 2200 - total flux cleaned = 0.00232374 Jy ! Component: 2250 - total flux cleaned = 0.0024696 Jy ! Component: 2300 - total flux cleaned = 0.0024743 Jy ! Component: 2350 - total flux cleaned = 0.00247119 Jy ! Component: 2400 - total flux cleaned = 0.00264945 Jy ! Component: 2450 - total flux cleaned = 0.00265003 Jy ! Component: 2500 - total flux cleaned = 0.00286122 Jy ! Component: 2550 - total flux cleaned = 0.00286944 Jy ! Component: 2600 - total flux cleaned = 0.00286577 Jy ! Component: 2650 - total flux cleaned = 0.00312754 Jy ! Component: 2700 - total flux cleaned = 0.00312548 Jy ! Component: 2750 - total flux cleaned = 0.00344441 Jy ! Component: 2800 - total flux cleaned = 0.00345627 Jy ! Component: 2850 - total flux cleaned = 0.00345384 Jy ! Component: 2900 - total flux cleaned = 0.00385054 Jy ! Component: 2950 - total flux cleaned = 0.00386689 Jy ! Component: 3000 - total flux cleaned = 0.00387131 Jy ! Component: 3050 - total flux cleaned = 0.00435128 Jy ! Component: 3100 - total flux cleaned = 0.00435524 Jy ! Component: 3150 - total flux cleaned = 0.00494602 Jy ! Component: 3200 - total flux cleaned = 0.00495133 Jy ! Component: 3250 - total flux cleaned = 0.00493999 Jy ! Component: 3300 - total flux cleaned = 0.00564887 Jy ! Component: 3350 - total flux cleaned = 0.00567644 Jy ! Component: 3400 - total flux cleaned = 0.0065597 Jy ! Component: 3450 - total flux cleaned = 0.00657148 Jy ! Component: 3500 - total flux cleaned = 0.00656871 Jy ! Component: 3550 - total flux cleaned = 0.00767782 Jy ! Component: 3600 - total flux cleaned = 0.00771392 Jy ! Component: 3650 - total flux cleaned = 0.00769998 Jy ! Component: 3700 - total flux cleaned = 0.00911816 Jy ! Component: 3750 - total flux cleaned = 0.00916738 Jy ! Component: 3800 - total flux cleaned = 0.00913142 Jy ! Component: 3850 - total flux cleaned = 0.010877 Jy ! Component: 3900 - total flux cleaned = 0.0109281 Jy ! Component: 3950 - total flux cleaned = 0.0108913 Jy ! Component: 4000 - total flux cleaned = 0.0130576 Jy ! Component: 4050 - total flux cleaned = 0.0131179 Jy ! Total flux subtracted in 4096 components = 0.0130947 Jy ! Clean residual min=-0.139123 max=0.147292 Jy/beam ! Clean residual mean=0.001299 rms=0.020233 Jy/beam ! Combined flux in latest and established models = 1.41969 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 242 components and 1.41969 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.675 at -8.006 degrees (North through East) ! Clean map min=-0.18609 max=1.2457 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.24569 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0188755 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.5458 4.5458 9.09161 18.1832 36.3664 72.7329 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0566 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.245 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.753 x 7.675 at -8.006 degrees (North through East) ! Clean map min=-0.18609 max=1.2457 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:40:55 2019