! Started logfile: J0334-4008_S_2017_06_10_pus_uvs.log on Mon May 6 14:44:16 2019 obs J0334-4008_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_06_10_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.430769 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.475459Jy sigma=0.003098 ! Fit after self-cal, rms=0.320798Jy sigma=0.002087 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=6.675 mas, bpa=-9.889 degrees ! Estimated noise=4304.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.963825 Jy ! Component: 100 - total flux cleaned = 1.18557 Jy ! Total flux subtracted in 100 components = 1.18557 Jy ! Clean residual min=-0.045650 max=0.082463 Jy/beam ! Clean residual mean=0.000734 rms=0.016411 Jy/beam ! Combined flux in latest and established models = 1.18557 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.18557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187025Jy sigma=0.001207 ! Fit after self-cal, rms=0.187014Jy sigma=0.001207 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.615 mas, bpa=-9.214 degrees ! Estimated noise=3765.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109205 Jy ! Component: 100 - total flux cleaned = 0.15848 Jy ! Component: 150 - total flux cleaned = 0.181599 Jy ! Component: 200 - total flux cleaned = 0.19254 Jy ! Total flux subtracted in 200 components = 0.19254 Jy ! Clean residual min=-0.015201 max=0.014122 Jy/beam ! Clean residual mean=-0.000078 rms=0.004121 Jy/beam ! Combined flux in latest and established models = 1.37811 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 1.37811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117341Jy sigma=0.000759 ! Fit after self-cal, rms=0.117326Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.04 ! LA 1.02 MK 1.01 NL 1.00* OV 1.03 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 0.98 MK 1.00 NL 1.00* OV 1.04 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.98 ! LA 0.97 MK 1.03 NL 1.00* OV 0.95 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00* ! LA 0.94 MK 0.94 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.117326Jy sigma=0.000758 ! Fit after self-cal, rms=0.104326Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.628 mas, bpa=-9.177 degrees ! Estimated noise=3765.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.57493e-05 Jy ! Component: 100 - total flux cleaned = -0.000169425 Jy ! Component: 150 - total flux cleaned = -0.000166609 Jy ! Component: 200 - total flux cleaned = -0.000167912 Jy ! Total flux subtracted in 200 components = -0.000167912 Jy ! Clean residual min=-0.008273 max=0.008257 Jy/beam ! Clean residual mean=-0.000059 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 1.37795 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 1.37795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104266Jy sigma=0.000679 ! Fit after self-cal, rms=0.104241Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104241Jy sigma=0.000679 ! Fit after self-cal, rms=0.104243Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.628 mas, bpa=-9.177 degrees ! Estimated noise=3765.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166851 Jy ! Component: 100 - total flux cleaned = 2.9227e-05 Jy ! Component: 150 - total flux cleaned = -5.5454e-05 Jy ! Component: 200 - total flux cleaned = -9.41456e-05 Jy ! Total flux subtracted in 200 components = -9.41456e-05 Jy ! Clean residual min=-0.008184 max=0.008156 Jy/beam ! Clean residual mean=-0.000059 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 1.37785 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 1.37785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104209Jy sigma=0.000678 ! Fit after self-cal, rms=0.104205Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177788 Jy ! Component: 100 - total flux cleaned = 9.88598e-05 Jy ! Component: 150 - total flux cleaned = 2.66987e-05 Jy ! Component: 200 - total flux cleaned = -7.49957e-05 Jy ! Total flux subtracted in 200 components = -7.49957e-05 Jy ! Clean residual min=-0.008135 max=0.008081 Jy/beam ! Clean residual mean=-0.000059 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 1.37778 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 1.37778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104181Jy sigma=0.000678 ! Fit after self-cal, rms=0.104178Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104178Jy sigma=0.000678 ! Fit after self-cal, rms=0.104169Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.628 mas, bpa=-9.186 degrees ! Estimated noise=3765.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.37604e-05 Jy ! Component: 100 - total flux cleaned = 2.4734e-05 Jy ! Component: 150 - total flux cleaned = -4.18489e-05 Jy ! Component: 200 - total flux cleaned = -0.000133436 Jy ! Total flux subtracted in 200 components = -0.000133436 Jy ! Clean residual min=-0.008149 max=0.008013 Jy/beam ! Clean residual mean=-0.000059 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 1.37764 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 1.37764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104149Jy sigma=0.000678 ! Fit after self-cal, rms=0.104147Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131648 Jy ! Component: 100 - total flux cleaned = 6.77861e-05 Jy ! Component: 150 - total flux cleaned = 9.66404e-06 Jy ! Component: 200 - total flux cleaned = -4.47275e-05 Jy ! Total flux subtracted in 200 components = -4.47275e-05 Jy ! Clean residual min=-0.008145 max=0.007961 Jy/beam ! Clean residual mean=-0.000059 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 1.3776 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 1.3776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104132Jy sigma=0.000678 ! Fit after self-cal, rms=0.104131Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104131Jy sigma=0.000678 ! Fit after self-cal, rms=0.104114Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.42 mas, bmaj=29.23 mas, bpa=-5.988 degrees ! Estimated noise=5196.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485802 Jy ! Component: 100 - total flux cleaned = 0.000484335 Jy ! Component: 150 - total flux cleaned = 0.000484451 Jy ! Component: 200 - total flux cleaned = 0.00048496 Jy ! Total flux subtracted in 200 components = 0.00048496 Jy ! Clean residual min=-0.010433 max=0.008468 Jy/beam ! Clean residual mean=-0.000122 rms=0.003548 Jy/beam ! Combined flux in latest and established models = 1.37808 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 1.37808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104136Jy sigma=0.000678 ! Fit after self-cal, rms=0.104126Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.60124e-05 Jy ! Component: 100 - total flux cleaned = 8.52868e-05 Jy ! Component: 150 - total flux cleaned = 8.44959e-05 Jy ! Component: 200 - total flux cleaned = 8.36554e-05 Jy ! Total flux subtracted in 200 components = 8.36554e-05 Jy ! Clean residual min=-0.010425 max=0.008418 Jy/beam ! Clean residual mean=-0.000122 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 1.37817 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 1.37817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104156Jy sigma=0.000678 ! Fit after self-cal, rms=0.104149Jy sigma=0.000678 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.628 mas, bpa=-9.195 degrees ! Estimated noise=3764.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.777 x 7.628 at -9.195 degrees (North through East) ! Clean map min=-0.0081067 max=1.2415 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104149Jy sigma=0.000678 ! Fit after self-cal, rms=0.093147Jy sigma=0.000604 ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.63 mas, bpa=-9.174 degrees ! Estimated noise=3769.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76613e-05 Jy ! Component: 100 - total flux cleaned = -0.000114871 Jy ! Component: 150 - total flux cleaned = -0.000140843 Jy ! Component: 200 - total flux cleaned = -0.000139628 Jy ! Total flux subtracted in 200 components = -0.000139628 Jy ! Clean residual min=-0.008278 max=0.008151 Jy/beam ! Clean residual mean=-0.000076 rms=0.002382 Jy/beam ! Combined flux in latest and established models = 1.37803 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 1.37803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093132Jy sigma=0.000604 ! Fit after self-cal, rms=0.093131Jy sigma=0.000604 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50254e-05 Jy ! Component: 100 - total flux cleaned = -3.55474e-05 Jy ! Component: 150 - total flux cleaned = -1.1589e-05 Jy ! Component: 200 - total flux cleaned = -3.36086e-05 Jy ! Total flux subtracted in 200 components = -3.36086e-05 Jy ! Clean residual min=-0.008269 max=0.008114 Jy/beam ! Clean residual mean=-0.000076 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 1.37799 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 1.37799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093119Jy sigma=0.000604 ! Fit after self-cal, rms=0.093118Jy sigma=0.000604 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.000604 ! Fit after self-cal, rms=0.093095Jy sigma=0.000604 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=6.68 mas, bpa=-9.965 degrees ! Estimated noise=4310.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.962835 Jy ! Component: 100 - total flux cleaned = 1.18217 Jy ! Component: 150 - total flux cleaned = 1.26879 Jy ! Component: 200 - total flux cleaned = 1.31533 Jy ! Total flux subtracted in 200 components = 1.31533 Jy ! Clean residual min=-0.013967 max=0.022991 Jy/beam ! Clean residual mean=0.000211 rms=0.005233 Jy/beam ! Combined flux in latest and established models = 1.31533 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.31533 Jy ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.629 mas, bpa=-9.176 degrees ! Estimated noise=3768.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.03377 Jy ! Component: 100 - total flux cleaned = 0.0492875 Jy ! Component: 150 - total flux cleaned = 0.0564806 Jy ! Component: 200 - total flux cleaned = 0.0598325 Jy ! Total flux subtracted in 200 components = 0.0598325 Jy ! Clean residual min=-0.008414 max=0.007776 Jy/beam ! Clean residual mean=-0.000072 rms=0.002376 Jy/beam ! Combined flux in latest and established models = 1.37517 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 1.37517 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.42 mas, bmaj=29.25 mas, bpa=-5.969 degrees ! Estimated noise=5198.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259934 Jy ! Component: 100 - total flux cleaned = 0.00303204 Jy ! Component: 150 - total flux cleaned = 0.00304807 Jy ! Component: 200 - total flux cleaned = 0.00304909 Jy ! Total flux subtracted in 200 components = 0.00304909 Jy ! Clean residual min=-0.010415 max=0.008618 Jy/beam ! Clean residual mean=-0.000157 rms=0.003667 Jy/beam ! Combined flux in latest and established models = 1.37821 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58781e-05 Jy ! Component: 100 - total flux cleaned = 3.23534e-05 Jy ! Component: 150 - total flux cleaned = 4.89405e-05 Jy ! Component: 200 - total flux cleaned = 6.49247e-05 Jy ! Total flux subtracted in 200 components = 6.49247e-05 Jy ! Clean residual min=-0.010407 max=0.008586 Jy/beam ! Clean residual mean=-0.000157 rms=0.003661 Jy/beam ! Combined flux in latest and established models = 1.37828 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 1.37828 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.629 mas, bpa=-9.176 degrees ! Estimated noise=3768.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000917157 Jy ! Component: 100 - total flux cleaned = -0.00077033 Jy ! Component: 150 - total flux cleaned = -0.000656499 Jy ! Component: 200 - total flux cleaned = -0.000586561 Jy ! Total flux subtracted in 200 components = -0.000586561 Jy ! Clean residual min=-0.008206 max=0.007870 Jy/beam ! Clean residual mean=-0.000075 rms=0.002348 Jy/beam ! Combined flux in latest and established models = 1.37769 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 1.37769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093055Jy sigma=0.000603 ! Fit after self-cal, rms=0.093055Jy sigma=0.000603 wmodel J0334-4008_S_2017_06_10_pus_map.mod ! Writing 44 model components to file: J0334-4008_S_2017_06_10_pus_map.mod wobs J0334-4008_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_06_10_pus_uvs.fits wwins J0334-4008_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0334-4008_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000605178 Jy ! Component: 100 - total flux cleaned = -0.000478304 Jy ! Component: 150 - total flux cleaned = -4.12613e-05 Jy ! Component: 200 - total flux cleaned = 0.000362227 Jy ! Component: 250 - total flux cleaned = 0.0011069 Jy ! Component: 300 - total flux cleaned = 0.00154176 Jy ! Component: 350 - total flux cleaned = 0.00211714 Jy ! Component: 400 - total flux cleaned = 0.00312925 Jy ! Component: 450 - total flux cleaned = 0.00394111 Jy ! Component: 500 - total flux cleaned = 0.00471827 Jy ! Component: 550 - total flux cleaned = 0.00546186 Jy ! Component: 600 - total flux cleaned = 0.00624087 Jy ! Component: 650 - total flux cleaned = 0.00692805 Jy ! Component: 700 - total flux cleaned = 0.00771549 Jy ! Component: 750 - total flux cleaned = 0.00847758 Jy ! Component: 800 - total flux cleaned = 0.00904767 Jy ! Component: 850 - total flux cleaned = 0.00960334 Jy ! Component: 900 - total flux cleaned = 0.00987455 Jy ! Component: 950 - total flux cleaned = 0.0099809 Jy ! Component: 1000 - total flux cleaned = 0.0101382 Jy ! Component: 1050 - total flux cleaned = 0.0103437 Jy ! Component: 1100 - total flux cleaned = 0.0105468 Jy ! Component: 1150 - total flux cleaned = 0.0107484 Jy ! Component: 1200 - total flux cleaned = 0.0109981 Jy ! Component: 1250 - total flux cleaned = 0.0111962 Jy ! Component: 1300 - total flux cleaned = 0.0113928 Jy ! Component: 1350 - total flux cleaned = 0.0115389 Jy ! Component: 1400 - total flux cleaned = 0.0116842 Jy ! Component: 1450 - total flux cleaned = 0.0116841 Jy ! Component: 1500 - total flux cleaned = 0.0117326 Jy ! Component: 1550 - total flux cleaned = 0.0116841 Jy ! Component: 1600 - total flux cleaned = 0.0118291 Jy ! Component: 1650 - total flux cleaned = 0.0117813 Jy ! Component: 1700 - total flux cleaned = 0.0118297 Jy ! Component: 1750 - total flux cleaned = 0.011731 Jy ! Component: 1800 - total flux cleaned = 0.0116804 Jy ! Component: 1850 - total flux cleaned = 0.0116303 Jy ! Component: 1900 - total flux cleaned = 0.0116825 Jy ! Component: 1950 - total flux cleaned = 0.0116822 Jy ! Component: 2000 - total flux cleaned = 0.0117369 Jy ! Component: 2050 - total flux cleaned = 0.0117366 Jy ! Component: 2100 - total flux cleaned = 0.0117949 Jy ! Component: 2150 - total flux cleaned = 0.0118558 Jy ! Component: 2200 - total flux cleaned = 0.0118562 Jy ! Component: 2250 - total flux cleaned = 0.0119197 Jy ! Component: 2300 - total flux cleaned = 0.011986 Jy ! Component: 2350 - total flux cleaned = 0.0120555 Jy ! Component: 2400 - total flux cleaned = 0.0120553 Jy ! Component: 2450 - total flux cleaned = 0.0121271 Jy ! Component: 2500 - total flux cleaned = 0.0122026 Jy ! Component: 2550 - total flux cleaned = 0.0122808 Jy ! Component: 2600 - total flux cleaned = 0.0123594 Jy ! Component: 2650 - total flux cleaned = 0.0124424 Jy ! Component: 2700 - total flux cleaned = 0.0126118 Jy ! Component: 2750 - total flux cleaned = 0.0126129 Jy ! Component: 2800 - total flux cleaned = 0.0127022 Jy ! Component: 2850 - total flux cleaned = 0.0127934 Jy ! Component: 2900 - total flux cleaned = 0.0128884 Jy ! Component: 2950 - total flux cleaned = 0.0129845 Jy ! Component: 3000 - total flux cleaned = 0.0130852 Jy ! Component: 3050 - total flux cleaned = 0.0131863 Jy ! Component: 3100 - total flux cleaned = 0.0132931 Jy ! Component: 3150 - total flux cleaned = 0.0134005 Jy ! Component: 3200 - total flux cleaned = 0.0136289 Jy ! Component: 3250 - total flux cleaned = 0.0137463 Jy ! Component: 3300 - total flux cleaned = 0.013994 Jy ! Component: 3350 - total flux cleaned = 0.014122 Jy ! Component: 3400 - total flux cleaned = 0.0143852 Jy ! Component: 3450 - total flux cleaned = 0.0145208 Jy ! Component: 3500 - total flux cleaned = 0.0146611 Jy ! Component: 3550 - total flux cleaned = 0.0148071 Jy ! Component: 3600 - total flux cleaned = 0.0151086 Jy ! Component: 3650 - total flux cleaned = 0.0152614 Jy ! Component: 3700 - total flux cleaned = 0.0154208 Jy ! Component: 3750 - total flux cleaned = 0.0157509 Jy ! Component: 3800 - total flux cleaned = 0.0160943 Jy ! Component: 3850 - total flux cleaned = 0.0160935 Jy ! Component: 3900 - total flux cleaned = 0.0164547 Jy ! Component: 3950 - total flux cleaned = 0.0166449 Jy ! Component: 4000 - total flux cleaned = 0.0168408 Jy ! Component: 4050 - total flux cleaned = 0.0170408 Jy ! Total flux subtracted in 4096 components = 0.0174556 Jy ! Clean residual min=-0.011804 max=0.012864 Jy/beam ! Clean residual mean=0.000020 rms=0.002845 Jy/beam ! Combined flux in latest and established models = 1.39515 Jy keep ! Adding 164 model components to the UV plane model. ! The established model now contains 208 components and 1.39515 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.779 x 7.629 at -9.176 degrees (North through East) ! Clean map min=-0.026388 max=1.2521 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.25212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00335426 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.803658 0.803658 1.60732 3.21463 6.42927 12.8585 25.7171 51.4341 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.01 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.252 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.779 x 7.629 at -9.176 degrees (North through East) ! Clean map min=-0.026388 max=1.2521 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:44:21 2019