! Started logfile: J0334-4008_S_2017_05_27_pus_uvs.log on Fri May 3 10:56:12 2019 obs J0334-4008_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_05_27_pus_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.567742 visibilities/baseline/integration-bin. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 3168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.418952Jy sigma=0.002015 ! Fit after self-cal, rms=0.398245Jy sigma=0.001923 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.511 mas, bmaj=7.331 mas, bpa=-7.144 degrees ! Estimated noise=3803.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.925835 Jy ! Component: 100 - total flux cleaned = 1.14129 Jy ! Total flux subtracted in 100 components = 1.14129 Jy ! Clean residual min=-0.065683 max=0.135885 Jy/beam ! Clean residual mean=-0.000169 rms=0.017311 Jy/beam ! Combined flux in latest and established models = 1.14129 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.14129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348251Jy sigma=0.001516 ! Fit after self-cal, rms=0.348209Jy sigma=0.001516 ! Inverting map ! Added new window around map position (-3, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125969 Jy ! Component: 100 - total flux cleaned = 0.193066 Jy ! Total flux subtracted in 100 components = 0.193066 Jy ! Clean residual min=-0.057718 max=0.088866 Jy/beam ! Clean residual mean=0.000028 rms=0.012986 Jy/beam ! Combined flux in latest and established models = 1.33435 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.33435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299366Jy sigma=0.001164 ! Fit after self-cal, rms=0.295741Jy sigma=0.001144 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=8.651 mas, bpa=-6.113 degrees ! Estimated noise=3008.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731165 Jy ! Component: 100 - total flux cleaned = 0.0813163 Jy ! Component: 150 - total flux cleaned = 0.0850434 Jy ! Component: 200 - total flux cleaned = 0.0880318 Jy ! Total flux subtracted in 200 components = 0.0880318 Jy ! Clean residual min=-0.039899 max=0.063929 Jy/beam ! Clean residual mean=0.000135 rms=0.010276 Jy/beam ! Combined flux in latest and established models = 1.42238 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 1.42238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275196Jy sigma=0.001021 ! Fit after self-cal, rms=0.272365Jy sigma=0.001003 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.45 KP 0.99 ! LA 0.99 MK 1.00 NL 1.00 OV 1.00 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.58 KP 0.97 ! LA 0.94 MK 0.99 NL 1.24 OV 1.00 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.54 KP 0.97 ! LA 0.97 MK 1.02 NL 1.22 OV 0.92 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.42 KP 1.00* ! LA 0.96 MK 0.93 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.272365Jy sigma=0.001003 ! Fit after self-cal, rms=0.252988Jy sigma=0.000812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.585 mas, bpa=-5.716 degrees ! Estimated noise=3050.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0164539 Jy ! Component: 100 - total flux cleaned = -0.0189738 Jy ! Component: 150 - total flux cleaned = -0.0204365 Jy ! Component: 200 - total flux cleaned = -0.0210726 Jy ! Total flux subtracted in 200 components = -0.0210726 Jy ! Clean residual min=-0.028327 max=0.023546 Jy/beam ! Clean residual mean=0.000227 rms=0.006042 Jy/beam ! Combined flux in latest and established models = 1.40131 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 1.40131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247667Jy sigma=0.000782 ! Fit after self-cal, rms=0.248185Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248185Jy sigma=0.000781 ! Fit after self-cal, rms=0.245389Jy sigma=0.000720 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=8.634 mas, bpa=-5.693 degrees ! Estimated noise=3049.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105832 Jy ! Component: 100 - total flux cleaned = -0.010578 Jy ! Component: 150 - total flux cleaned = -0.0110177 Jy ! Component: 200 - total flux cleaned = -0.0110108 Jy ! Total flux subtracted in 200 components = -0.0110108 Jy ! Clean residual min=-0.017859 max=0.015402 Jy/beam ! Clean residual mean=0.000061 rms=0.004032 Jy/beam ! Combined flux in latest and established models = 1.3903 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 1.3903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242785Jy sigma=0.000709 ! Fit after self-cal, rms=0.242718Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000861606 Jy ! Component: 100 - total flux cleaned = -0.000870115 Jy ! Component: 150 - total flux cleaned = -0.00122837 Jy ! Component: 200 - total flux cleaned = -0.00154183 Jy ! Total flux subtracted in 200 components = -0.00154183 Jy ! Clean residual min=-0.016831 max=0.014894 Jy/beam ! Clean residual mean=0.000052 rms=0.003886 Jy/beam ! Combined flux in latest and established models = 1.38876 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 1.38876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241544Jy sigma=0.000704 ! Fit after self-cal, rms=0.241511Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241511Jy sigma=0.000703 ! Fit after self-cal, rms=0.243991Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.653 mas, bpa=-5.677 degrees ! Estimated noise=3044.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00433956 Jy ! Component: 100 - total flux cleaned = -0.00460382 Jy ! Component: 150 - total flux cleaned = -0.0046015 Jy ! Component: 200 - total flux cleaned = -0.00460035 Jy ! Total flux subtracted in 200 components = -0.00460035 Jy ! Clean residual min=-0.012141 max=0.011439 Jy/beam ! Clean residual mean=-0.000013 rms=0.002998 Jy/beam ! Combined flux in latest and established models = 1.38416 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 1.38416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243006Jy sigma=0.000680 ! Fit after self-cal, rms=0.242977Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347528 Jy ! Component: 100 - total flux cleaned = -0.000130288 Jy ! Component: 150 - total flux cleaned = -0.000140532 Jy ! Component: 200 - total flux cleaned = -0.000143996 Jy ! Total flux subtracted in 200 components = -0.000143996 Jy ! Clean residual min=-0.011969 max=0.011355 Jy/beam ! Clean residual mean=-0.000012 rms=0.002918 Jy/beam ! Combined flux in latest and established models = 1.38402 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 1.38402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242494Jy sigma=0.000678 ! Fit after self-cal, rms=0.242461Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242461Jy sigma=0.000678 ! Fit after self-cal, rms=0.244726Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.739 mas, bmaj=27.29 mas, bpa=-3.313 degrees ! Estimated noise=3733.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00318322 Jy ! Component: 100 - total flux cleaned = -0.00253562 Jy ! Component: 150 - total flux cleaned = -0.00200447 Jy ! Component: 200 - total flux cleaned = -0.0014446 Jy ! Total flux subtracted in 200 components = -0.0014446 Jy ! Clean residual min=-0.012494 max=0.013179 Jy/beam ! Clean residual mean=0.000013 rms=0.003294 Jy/beam ! Combined flux in latest and established models = 1.38257 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 1.38257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244258Jy sigma=0.000677 ! Fit after self-cal, rms=0.244254Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181039 Jy ! Component: 100 - total flux cleaned = 0.000225391 Jy ! Component: 150 - total flux cleaned = 0.0005753 Jy ! Component: 200 - total flux cleaned = 0.000786561 Jy ! Total flux subtracted in 200 components = 0.000786561 Jy ! Clean residual min=-0.012403 max=0.013395 Jy/beam ! Clean residual mean=0.000026 rms=0.003270 Jy/beam ! Combined flux in latest and established models = 1.38336 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 121 components and 1.38336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244068Jy sigma=0.000676 ! Fit after self-cal, rms=0.244058Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.659 mas, bpa=-5.653 degrees ! Estimated noise=3042.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 8.659 at -5.653 degrees (North through East) ! Clean map min=-0.0227 max=1.1172 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244058Jy sigma=0.000676 ! Fit after self-cal, rms=0.238977Jy sigma=0.000619 ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=8.673 mas, bpa=-5.603 degrees ! Estimated noise=3037.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00418247 Jy ! Component: 100 - total flux cleaned = -0.00455822 Jy ! Component: 150 - total flux cleaned = -0.00455554 Jy ! Component: 200 - total flux cleaned = -0.00439885 Jy ! Total flux subtracted in 200 components = -0.00439885 Jy ! Clean residual min=-0.010806 max=0.010538 Jy/beam ! Clean residual mean=-0.000005 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 1.37896 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 1.37896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238601Jy sigma=0.000618 ! Fit after self-cal, rms=0.238576Jy sigma=0.000618 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415464 Jy ! Component: 100 - total flux cleaned = -0.000418238 Jy ! Component: 150 - total flux cleaned = -0.000280036 Jy ! Component: 200 - total flux cleaned = -0.000286152 Jy ! Total flux subtracted in 200 components = -0.000286152 Jy ! Clean residual min=-0.010628 max=0.010574 Jy/beam ! Clean residual mean=-0.000006 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 1.37867 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 134 components and 1.37867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238365Jy sigma=0.000617 ! Fit after self-cal, rms=0.238359Jy sigma=0.000617 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238359Jy sigma=0.000617 ! Fit after self-cal, rms=0.240215Jy sigma=0.000616 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.525 mas, bmaj=7.268 mas, bpa=-6.614 degrees ! Estimated noise=3904.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.947789 Jy ! Component: 100 - total flux cleaned = 1.16205 Jy ! Component: 150 - total flux cleaned = 1.24912 Jy ! Component: 200 - total flux cleaned = 1.29869 Jy ! Total flux subtracted in 200 components = 1.29869 Jy ! Clean residual min=-0.024980 max=0.029634 Jy/beam ! Clean residual mean=-0.000058 rms=0.004959 Jy/beam ! Combined flux in latest and established models = 1.29868 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 1.29868 Jy ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=8.674 mas, bpa=-5.598 degrees ! Estimated noise=3035.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405529 Jy ! Component: 100 - total flux cleaned = 0.0615168 Jy ! Component: 150 - total flux cleaned = 0.0656306 Jy ! Component: 200 - total flux cleaned = 0.0686791 Jy ! Total flux subtracted in 200 components = 0.0686791 Jy ! Clean residual min=-0.011487 max=0.014435 Jy/beam ! Clean residual mean=-0.000036 rms=0.002874 Jy/beam ! Combined flux in latest and established models = 1.36736 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 61 components and 1.36736 Jy ! Inverting map ! Added new window around map position (2.5, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754053 Jy ! Component: 100 - total flux cleaned = 0.00721181 Jy ! Component: 150 - total flux cleaned = 0.00659975 Jy ! Component: 200 - total flux cleaned = 0.00604435 Jy ! Total flux subtracted in 200 components = 0.00604435 Jy ! Clean residual min=-0.009954 max=0.009985 Jy/beam ! Clean residual mean=-0.000008 rms=0.002594 Jy/beam ! Combined flux in latest and established models = 1.37341 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 1.37341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.758 mas, bmaj=27.39 mas, bpa=-3.267 degrees ! Estimated noise=3720.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280263 Jy ! Component: 100 - total flux cleaned = 0.00279054 Jy ! Component: 150 - total flux cleaned = 0.00278214 Jy ! Component: 200 - total flux cleaned = 0.00266077 Jy ! Total flux subtracted in 200 components = 0.00266077 Jy ! Clean residual min=-0.010414 max=0.010068 Jy/beam ! Clean residual mean=0.000012 rms=0.002995 Jy/beam ! Combined flux in latest and established models = 1.37607 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111972 Jy ! Component: 100 - total flux cleaned = -0.000113012 Jy ! Component: 150 - total flux cleaned = -0.000220322 Jy ! Component: 200 - total flux cleaned = -0.000319727 Jy ! Total flux subtracted in 200 components = -0.000319727 Jy ! Clean residual min=-0.010383 max=0.010149 Jy/beam ! Clean residual mean=0.000010 rms=0.002969 Jy/beam ! Combined flux in latest and established models = 1.37575 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 1.37575 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=8.674 mas, bpa=-5.598 degrees ! Estimated noise=3035.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016264 Jy ! Component: 100 - total flux cleaned = -0.00185431 Jy ! Component: 150 - total flux cleaned = -0.00228429 Jy ! Component: 200 - total flux cleaned = -0.00228552 Jy ! Total flux subtracted in 200 components = -0.00228552 Jy ! Clean residual min=-0.009546 max=0.009619 Jy/beam ! Clean residual mean=-0.000009 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 1.37346 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 1.37346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239742Jy sigma=0.000615 ! Fit after self-cal, rms=0.239525Jy sigma=0.000614 wmodel J0334-4008_S_2017_05_27_pus_map.mod ! Writing 119 model components to file: J0334-4008_S_2017_05_27_pus_map.mod wobs J0334-4008_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_05_27_pus_uvs.fits wwins J0334-4008_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J0334-4008_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.00309e-05 Jy ! Component: 100 - total flux cleaned = 0.000966461 Jy ! Component: 150 - total flux cleaned = 0.0021772 Jy ! Component: 200 - total flux cleaned = 0.00349979 Jy ! Component: 250 - total flux cleaned = 0.00506242 Jy ! Component: 300 - total flux cleaned = 0.00643827 Jy ! Component: 350 - total flux cleaned = 0.00750966 Jy ! Component: 400 - total flux cleaned = 0.00855204 Jy ! Component: 450 - total flux cleaned = 0.008934 Jy ! Component: 500 - total flux cleaned = 0.00968267 Jy ! Component: 550 - total flux cleaned = 0.0099265 Jy ! Component: 600 - total flux cleaned = 0.0106445 Jy ! Component: 650 - total flux cleaned = 0.0108773 Jy ! Component: 700 - total flux cleaned = 0.0112201 Jy ! Component: 750 - total flux cleaned = 0.0115542 Jy ! Component: 800 - total flux cleaned = 0.0117761 Jy ! Component: 850 - total flux cleaned = 0.0117746 Jy ! Component: 900 - total flux cleaned = 0.012094 Jy ! Component: 950 - total flux cleaned = 0.0123036 Jy ! Component: 1000 - total flux cleaned = 0.0123018 Jy ! Component: 1050 - total flux cleaned = 0.0124048 Jy ! Component: 1100 - total flux cleaned = 0.0126055 Jy ! Component: 1150 - total flux cleaned = 0.0129995 Jy ! Component: 1200 - total flux cleaned = 0.0134846 Jy ! Component: 1250 - total flux cleaned = 0.0137716 Jy ! Component: 1300 - total flux cleaned = 0.0140552 Jy ! Component: 1350 - total flux cleaned = 0.0144297 Jy ! Component: 1400 - total flux cleaned = 0.01489 Jy ! Component: 1450 - total flux cleaned = 0.0152523 Jy ! Component: 1500 - total flux cleaned = 0.0152529 Jy ! Component: 1550 - total flux cleaned = 0.0156062 Jy ! Component: 1600 - total flux cleaned = 0.0158678 Jy ! Component: 1650 - total flux cleaned = 0.0160407 Jy ! Component: 1700 - total flux cleaned = 0.0163821 Jy ! Component: 1750 - total flux cleaned = 0.0166334 Jy ! Component: 1800 - total flux cleaned = 0.0168 Jy ! Component: 1850 - total flux cleaned = 0.0169647 Jy ! Component: 1900 - total flux cleaned = 0.0174539 Jy ! Component: 1950 - total flux cleaned = 0.0174541 Jy ! Component: 2000 - total flux cleaned = 0.017853 Jy ! Component: 2050 - total flux cleaned = 0.0179326 Jy ! Component: 2100 - total flux cleaned = 0.0182459 Jy ! Component: 2150 - total flux cleaned = 0.0186324 Jy ! Component: 2200 - total flux cleaned = 0.0184799 Jy ! Component: 2250 - total flux cleaned = 0.0189345 Jy ! Component: 2300 - total flux cleaned = 0.0187852 Jy ! Component: 2350 - total flux cleaned = 0.018787 Jy ! Component: 2400 - total flux cleaned = 0.0191556 Jy ! Component: 2450 - total flux cleaned = 0.0190103 Jy ! Component: 2500 - total flux cleaned = 0.0192273 Jy ! Component: 2550 - total flux cleaned = 0.0191549 Jy ! Component: 2600 - total flux cleaned = 0.0191548 Jy ! Component: 2650 - total flux cleaned = 0.0191555 Jy ! Component: 2700 - total flux cleaned = 0.0190852 Jy ! Component: 2750 - total flux cleaned = 0.0190852 Jy ! Component: 2800 - total flux cleaned = 0.0192221 Jy ! Component: 2850 - total flux cleaned = 0.0190849 Jy ! Component: 2900 - total flux cleaned = 0.0188802 Jy ! Component: 2950 - total flux cleaned = 0.0187451 Jy ! Component: 3000 - total flux cleaned = 0.0187448 Jy ! Component: 3050 - total flux cleaned = 0.0184124 Jy ! Component: 3100 - total flux cleaned = 0.0180827 Jy ! Component: 3150 - total flux cleaned = 0.0178862 Jy ! Component: 3200 - total flux cleaned = 0.017756 Jy ! Component: 3250 - total flux cleaned = 0.0173674 Jy ! Component: 3300 - total flux cleaned = 0.0171094 Jy ! Component: 3350 - total flux cleaned = 0.016982 Jy ! Component: 3400 - total flux cleaned = 0.0171087 Jy ! Component: 3450 - total flux cleaned = 0.016667 Jy ! Component: 3500 - total flux cleaned = 0.0166669 Jy ! Component: 3550 - total flux cleaned = 0.0162929 Jy ! Component: 3600 - total flux cleaned = 0.0158592 Jy ! Component: 3650 - total flux cleaned = 0.0159215 Jy ! Component: 3700 - total flux cleaned = 0.0156155 Jy ! Component: 3750 - total flux cleaned = 0.0153726 Jy ! Component: 3800 - total flux cleaned = 0.0152514 Jy ! Component: 3850 - total flux cleaned = 0.0150114 Jy ! Component: 3900 - total flux cleaned = 0.0147137 Jy ! Component: 3950 - total flux cleaned = 0.0145359 Jy ! Component: 4000 - total flux cleaned = 0.0142408 Jy ! Component: 4050 - total flux cleaned = 0.0140061 Jy ! Total flux subtracted in 4096 components = 0.013831 Jy ! Clean residual min=-0.003344 max=0.003315 Jy/beam ! Clean residual mean=-0.000019 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 1.3873 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 420 components and 1.38729 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 8.674 at -5.598 degrees (North through East) ! Clean map min=-0.01175 max=1.1595 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.15949 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108864 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.281669 0.281669 0.563339 1.12668 2.25335 4.50671 9.01342 18.0268 36.0537 72.1073 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.159 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 8.674 at -5.598 degrees (North through East) ! Clean map min=-0.01175 max=1.1595 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:56:17 2019