! Started logfile: J0334-4008_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:45 2019 obs J0334-4008_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_04_28_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566667 visibilities/baseline/integration-bin. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.407447Jy sigma=0.001648 ! Fit after self-cal, rms=0.389832Jy sigma=0.001557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.352 mas, bmaj=6.799 mas, bpa=-7.062 degrees ! Estimated noise=6559.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.945152 Jy ! Component: 100 - total flux cleaned = 1.1517 Jy ! Total flux subtracted in 100 components = 1.1517 Jy ! Clean residual min=-0.053712 max=0.104496 Jy/beam ! Clean residual mean=0.000100 rms=0.017901 Jy/beam ! Combined flux in latest and established models = 1.1517 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.1517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331788Jy sigma=0.001124 ! Fit after self-cal, rms=0.331735Jy sigma=0.001124 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=7.796 mas, bpa=-7.272 degrees ! Estimated noise=5386.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-41, 109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110785 Jy ! Component: 100 - total flux cleaned = 0.153495 Jy ! Component: 150 - total flux cleaned = 0.172774 Jy ! Component: 200 - total flux cleaned = 0.176812 Jy ! Total flux subtracted in 200 components = 0.176812 Jy ! Clean residual min=-0.046242 max=0.042164 Jy/beam ! Clean residual mean=0.000408 rms=0.010441 Jy/beam ! Combined flux in latest and established models = 1.32851 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 1.32851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288669Jy sigma=0.000883 ! Fit after self-cal, rms=0.286959Jy sigma=0.000868 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.95 ! LA 1.24 MK 0.99 NL 0.95 OV 0.97 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.92 ! LA 1.17 MK 1.01 NL 1.20 OV 1.00 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.97 ! LA 1.02 MK 1.04 NL 1.06 OV 0.91 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.00* ! LA 0.57 MK 0.95 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.286959Jy sigma=0.000868 ! Fit after self-cal, rms=0.193653Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=7.798 mas, bpa=-7.072 degrees ! Estimated noise=5406.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00438318 Jy ! Component: 100 - total flux cleaned = -0.0043942 Jy ! Component: 150 - total flux cleaned = -0.00439334 Jy ! Component: 200 - total flux cleaned = -0.0046004 Jy ! Total flux subtracted in 200 components = -0.0046004 Jy ! Clean residual min=-0.015043 max=0.013565 Jy/beam ! Clean residual mean=0.000027 rms=0.003704 Jy/beam ! Combined flux in latest and established models = 1.32391 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 1.32391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192596Jy sigma=0.000675 ! Fit after self-cal, rms=0.192809Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192809Jy sigma=0.000675 ! Fit after self-cal, rms=0.193480Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=7.8 mas, bpa=-7.062 degrees ! Estimated noise=5412.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307984 Jy ! Component: 100 - total flux cleaned = -0.00348337 Jy ! Component: 150 - total flux cleaned = -0.00349385 Jy ! Component: 200 - total flux cleaned = -0.00364252 Jy ! Total flux subtracted in 200 components = -0.00364252 Jy ! Clean residual min=-0.014601 max=0.012998 Jy/beam ! Clean residual mean=0.000028 rms=0.003500 Jy/beam ! Combined flux in latest and established models = 1.32027 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 59 components and 1.32027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193088Jy sigma=0.000673 ! Fit after self-cal, rms=0.193086Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000749492 Jy ! Component: 100 - total flux cleaned = -0.00112154 Jy ! Component: 150 - total flux cleaned = -0.00122951 Jy ! Component: 200 - total flux cleaned = -0.00133186 Jy ! Total flux subtracted in 200 components = -0.00133186 Jy ! Clean residual min=-0.014391 max=0.012991 Jy/beam ! Clean residual mean=0.000028 rms=0.003415 Jy/beam ! Combined flux in latest and established models = 1.31894 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 1.31894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192936Jy sigma=0.000672 ! Fit after self-cal, rms=0.192921Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192921Jy sigma=0.000672 ! Fit after self-cal, rms=0.193561Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=7.8 mas, bpa=-7.047 degrees ! Estimated noise=5415.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00252843 Jy ! Component: 100 - total flux cleaned = -0.00289528 Jy ! Component: 150 - total flux cleaned = -0.00290151 Jy ! Component: 200 - total flux cleaned = -0.00299554 Jy ! Total flux subtracted in 200 components = -0.00299554 Jy ! Clean residual min=-0.014146 max=0.012518 Jy/beam ! Clean residual mean=0.000028 rms=0.003335 Jy/beam ! Combined flux in latest and established models = 1.31594 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 1.31594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193386Jy sigma=0.000671 ! Fit after self-cal, rms=0.193362Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378336 Jy ! Component: 100 - total flux cleaned = -0.00046439 Jy ! Component: 150 - total flux cleaned = -0.000542166 Jy ! Component: 200 - total flux cleaned = -0.000539873 Jy ! Total flux subtracted in 200 components = -0.000539873 Jy ! Clean residual min=-0.013953 max=0.012641 Jy/beam ! Clean residual mean=0.000028 rms=0.003300 Jy/beam ! Combined flux in latest and established models = 1.3154 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 1.3154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193290Jy sigma=0.000670 ! Fit after self-cal, rms=0.193271Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193271Jy sigma=0.000670 ! Fit after self-cal, rms=0.193853Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.675 mas, bmaj=27.27 mas, bpa=-3.268 degrees ! Estimated noise=7424.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201016 Jy ! Component: 100 - total flux cleaned = -0.00181622 Jy ! Component: 150 - total flux cleaned = -0.00164587 Jy ! Component: 200 - total flux cleaned = -0.00149593 Jy ! Total flux subtracted in 200 components = -0.00149593 Jy ! Clean residual min=-0.016156 max=0.009795 Jy/beam ! Clean residual mean=0.000051 rms=0.004182 Jy/beam ! Combined flux in latest and established models = 1.31391 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 1.31391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193741Jy sigma=0.000670 ! Fit after self-cal, rms=0.193723Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.85197e-06 Jy ! Component: 100 - total flux cleaned = 0.000116335 Jy ! Component: 150 - total flux cleaned = 0.000175847 Jy ! Component: 200 - total flux cleaned = 0.0002295 Jy ! Total flux subtracted in 200 components = 0.0002295 Jy ! Clean residual min=-0.016107 max=0.009754 Jy/beam ! Clean residual mean=0.000049 rms=0.004152 Jy/beam ! Combined flux in latest and established models = 1.31414 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 96 components and 1.31414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193687Jy sigma=0.000670 ! Fit after self-cal, rms=0.193675Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=7.799 mas, bpa=-7.035 degrees ! Estimated noise=5416 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.799 x 7.799 at -7.035 degrees (North through East) ! Clean map min=-0.013897 max=1.1537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193675Jy sigma=0.000670 ! Fit after self-cal, rms=0.181860Jy sigma=0.000611 ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.8 mas, bpa=-7.013 degrees ! Estimated noise=5421.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174808 Jy ! Component: 100 - total flux cleaned = -0.00194108 Jy ! Component: 150 - total flux cleaned = -0.00202715 Jy ! Component: 200 - total flux cleaned = -0.00202575 Jy ! Total flux subtracted in 200 components = -0.00202575 Jy ! Clean residual min=-0.013891 max=0.011493 Jy/beam ! Clean residual mean=0.000025 rms=0.003171 Jy/beam ! Combined flux in latest and established models = 1.31211 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 1.31211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181729Jy sigma=0.000611 ! Fit after self-cal, rms=0.181686Jy sigma=0.000611 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124776 Jy ! Component: 100 - total flux cleaned = -0.000267364 Jy ! Component: 150 - total flux cleaned = -0.000331307 Jy ! Component: 200 - total flux cleaned = -0.000394063 Jy ! Total flux subtracted in 200 components = -0.000394063 Jy ! Clean residual min=-0.013659 max=0.011598 Jy/beam ! Clean residual mean=0.000024 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 1.31172 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 1.31172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181629Jy sigma=0.000610 ! Fit after self-cal, rms=0.181598Jy sigma=0.000610 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181598Jy sigma=0.000610 ! Fit after self-cal, rms=0.182074Jy sigma=0.000610 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.359 mas, bmaj=6.794 mas, bpa=-6.928 degrees ! Estimated noise=6600.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.948482 Jy ! Component: 100 - total flux cleaned = 1.16066 Jy ! Component: 150 - total flux cleaned = 1.23409 Jy ! Component: 200 - total flux cleaned = 1.27033 Jy ! Total flux subtracted in 200 components = 1.27033 Jy ! Clean residual min=-0.020483 max=0.021948 Jy/beam ! Clean residual mean=-0.000018 rms=0.006033 Jy/beam ! Combined flux in latest and established models = 1.27033 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.27033 Jy ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.8 mas, bpa=-7.006 degrees ! Estimated noise=5421.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43.5, 124). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249788 Jy ! Component: 100 - total flux cleaned = 0.036667 Jy ! Component: 150 - total flux cleaned = 0.0389505 Jy ! Component: 200 - total flux cleaned = 0.0399867 Jy ! Total flux subtracted in 200 components = 0.0399867 Jy ! Clean residual min=-0.014198 max=0.012869 Jy/beam ! Clean residual mean=0.000023 rms=0.003401 Jy/beam ! Combined flux in latest and established models = 1.31032 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 1.31032 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.693 mas, bmaj=27.31 mas, bpa=-3.259 degrees ! Estimated noise=7423.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185881 Jy ! Component: 100 - total flux cleaned = 0.00195117 Jy ! Component: 150 - total flux cleaned = 0.00187243 Jy ! Component: 200 - total flux cleaned = 0.00187048 Jy ! Total flux subtracted in 200 components = 0.00187048 Jy ! Clean residual min=-0.014964 max=0.009423 Jy/beam ! Clean residual mean=0.000046 rms=0.004114 Jy/beam ! Combined flux in latest and established models = 1.31219 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.14101e-06 Jy ! Component: 100 - total flux cleaned = 5.55222e-06 Jy ! Component: 150 - total flux cleaned = 6.21528e-05 Jy ! Component: 200 - total flux cleaned = 0.000115371 Jy ! Total flux subtracted in 200 components = 0.000115371 Jy ! Clean residual min=-0.014802 max=0.009276 Jy/beam ! Clean residual mean=0.000045 rms=0.004080 Jy/beam ! Combined flux in latest and established models = 1.3123 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 1.3123 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.8 mas, bpa=-7.006 degrees ! Estimated noise=5421.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000712981 Jy ! Component: 100 - total flux cleaned = -0.000400848 Jy ! Component: 150 - total flux cleaned = -0.000255202 Jy ! Component: 200 - total flux cleaned = -0.000124275 Jy ! Total flux subtracted in 200 components = -0.000124275 Jy ! Clean residual min=-0.013834 max=0.012349 Jy/beam ! Clean residual mean=0.000021 rms=0.003195 Jy/beam ! Combined flux in latest and established models = 1.31218 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 1.31218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182220Jy sigma=0.000611 ! Fit after self-cal, rms=0.182169Jy sigma=0.000611 wmodel J0334-4008_S_2017_04_28_pus_map.mod ! Writing 78 model components to file: J0334-4008_S_2017_04_28_pus_map.mod wobs J0334-4008_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_04_28_pus_uvs.fits wwins J0334-4008_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0334-4008_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00312342 Jy ! Component: 100 - total flux cleaned = -0.00498611 Jy ! Component: 150 - total flux cleaned = -0.00584378 Jy ! Component: 200 - total flux cleaned = -0.00568267 Jy ! Component: 250 - total flux cleaned = -0.00553875 Jy ! Component: 300 - total flux cleaned = -0.00497363 Jy ! Component: 350 - total flux cleaned = -0.0044306 Jy ! Component: 400 - total flux cleaned = -0.00416845 Jy ! Component: 450 - total flux cleaned = -0.00429253 Jy ! Component: 500 - total flux cleaned = -0.00393568 Jy ! Component: 550 - total flux cleaned = -0.00439771 Jy ! Component: 600 - total flux cleaned = -0.00461979 Jy ! Component: 650 - total flux cleaned = -0.00494305 Jy ! Component: 700 - total flux cleaned = -0.00536324 Jy ! Component: 750 - total flux cleaned = -0.00556777 Jy ! Component: 800 - total flux cleaned = -0.00586697 Jy ! Component: 850 - total flux cleaned = -0.0061599 Jy ! Component: 900 - total flux cleaned = -0.00663938 Jy ! Component: 950 - total flux cleaned = -0.00701396 Jy ! Component: 1000 - total flux cleaned = -0.00738022 Jy ! Component: 1050 - total flux cleaned = -0.0075588 Jy ! Component: 1100 - total flux cleaned = -0.00764845 Jy ! Component: 1150 - total flux cleaned = -0.00790965 Jy ! Component: 1200 - total flux cleaned = -0.00808093 Jy ! Component: 1250 - total flux cleaned = -0.00799737 Jy ! Component: 1300 - total flux cleaned = -0.00816529 Jy ! Component: 1350 - total flux cleaned = -0.00799912 Jy ! Component: 1400 - total flux cleaned = -0.00791693 Jy ! Component: 1450 - total flux cleaned = -0.00783476 Jy ! Component: 1500 - total flux cleaned = -0.00750652 Jy ! Component: 1550 - total flux cleaned = -0.00734288 Jy ! Component: 1600 - total flux cleaned = -0.00701632 Jy ! Component: 1650 - total flux cleaned = -0.0067714 Jy ! Component: 1700 - total flux cleaned = -0.00644446 Jy ! Component: 1750 - total flux cleaned = -0.00628191 Jy ! Component: 1800 - total flux cleaned = -0.00628221 Jy ! Component: 1850 - total flux cleaned = -0.00620021 Jy ! Component: 1900 - total flux cleaned = -0.00611851 Jy ! Component: 1950 - total flux cleaned = -0.00611759 Jy ! Component: 2000 - total flux cleaned = -0.00611661 Jy ! Component: 2050 - total flux cleaned = -0.00611625 Jy ! Component: 2100 - total flux cleaned = -0.00611658 Jy ! Component: 2150 - total flux cleaned = -0.00602871 Jy ! Component: 2200 - total flux cleaned = -0.00611756 Jy ! Component: 2250 - total flux cleaned = -0.00611775 Jy ! Component: 2300 - total flux cleaned = -0.00611777 Jy ! Component: 2350 - total flux cleaned = -0.0061191 Jy ! Component: 2400 - total flux cleaned = -0.00611746 Jy ! Component: 2450 - total flux cleaned = -0.00631398 Jy ! Component: 2500 - total flux cleaned = -0.00631503 Jy ! Component: 2550 - total flux cleaned = -0.00641691 Jy ! Component: 2600 - total flux cleaned = -0.00641598 Jy ! Component: 2650 - total flux cleaned = -0.00652272 Jy ! Component: 2700 - total flux cleaned = -0.00652253 Jy ! Component: 2750 - total flux cleaned = -0.00663513 Jy ! Component: 2800 - total flux cleaned = -0.00663778 Jy ! Component: 2850 - total flux cleaned = -0.00663791 Jy ! Component: 2900 - total flux cleaned = -0.0067583 Jy ! Component: 2950 - total flux cleaned = -0.00663538 Jy ! Component: 3000 - total flux cleaned = -0.00675893 Jy ! Component: 3050 - total flux cleaned = -0.00675814 Jy ! Component: 3100 - total flux cleaned = -0.00675695 Jy ! Component: 3150 - total flux cleaned = -0.0068917 Jy ! Component: 3200 - total flux cleaned = -0.00689308 Jy ! Component: 3250 - total flux cleaned = -0.00689142 Jy ! Component: 3300 - total flux cleaned = -0.00703376 Jy ! Component: 3350 - total flux cleaned = -0.00718192 Jy ! Component: 3400 - total flux cleaned = -0.00733486 Jy ! Component: 3450 - total flux cleaned = -0.00749302 Jy ! Component: 3500 - total flux cleaned = -0.00765723 Jy ! Component: 3550 - total flux cleaned = -0.00765628 Jy ! Component: 3600 - total flux cleaned = -0.00782439 Jy ! Component: 3650 - total flux cleaned = -0.00817413 Jy ! Component: 3700 - total flux cleaned = -0.00817557 Jy ! Component: 3750 - total flux cleaned = -0.00835814 Jy ! Component: 3800 - total flux cleaned = -0.00854863 Jy ! Component: 3850 - total flux cleaned = -0.00874208 Jy ! Component: 3900 - total flux cleaned = -0.00894288 Jy ! Component: 3950 - total flux cleaned = -0.00915076 Jy ! Component: 4000 - total flux cleaned = -0.00936497 Jy ! Component: 4050 - total flux cleaned = -0.00958431 Jy ! Total flux subtracted in 4096 components = -0.00958262 Jy ! Clean residual min=-0.012661 max=0.014631 Jy/beam ! Clean residual mean=-0.000091 rms=0.003376 Jy/beam ! Combined flux in latest and established models = 1.3026 Jy keep ! Adding 185 model components to the UV plane model. ! The established model now contains 263 components and 1.3026 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.801 x 7.8 at -7.006 degrees (North through East) ! Clean map min=-0.022415 max=1.1609 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.16092 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00382699 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.988955 0.988955 1.97791 3.95582 7.91164 15.8233 31.6465 63.2931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0114 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.801 x 7.8 at -7.006 degrees (North through East) ! Clean map min=-0.022415 max=1.1609 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:15:49 2019