! Started logfile: J0334-4008_S_2017_03_23_pus_uvs.log on Mon May 13 09:47:00 2019 obs J0334-4008_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.319444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.463304Jy sigma=0.002107 ! Fit after self-cal, rms=0.401513Jy sigma=0.001743 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=24.23 mas, bpa=6.027 degrees ! Estimated noise=9011.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.963952 Jy ! Component: 100 - total flux cleaned = 1.18138 Jy ! Total flux subtracted in 100 components = 1.18138 Jy ! Clean residual min=-0.071152 max=0.078048 Jy/beam ! Clean residual mean=-0.000508 rms=0.024930 Jy/beam ! Combined flux in latest and established models = 1.18138 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.18138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296452Jy sigma=0.001224 ! Fit after self-cal, rms=0.296440Jy sigma=0.001224 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=24.33 mas, bpa=5.56 degrees ! Estimated noise=7961.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115885 Jy ! Component: 100 - total flux cleaned = 0.144158 Jy ! Component: 150 - total flux cleaned = 0.163525 Jy ! Component: 200 - total flux cleaned = 0.153831 Jy ! Total flux subtracted in 200 components = 0.153831 Jy ! Clean residual min=-0.030715 max=0.030689 Jy/beam ! Clean residual mean=-0.000290 rms=0.011207 Jy/beam ! Combined flux in latest and established models = 1.33521 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 72 components and 1.33521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206687Jy sigma=0.000877 ! Fit after self-cal, rms=0.206579Jy sigma=0.000877 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 1.03 MK 1.00* NL 1.00* OV 1.03 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 1.01 MK 1.00* NL 0.96 OV 1.04 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.89 ! LA 0.81 MK 1.00* NL 1.05 OV 0.94 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.206579Jy sigma=0.000877 ! Fit after self-cal, rms=0.121763Jy sigma=0.000617 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=24.07 mas, bpa=5.538 degrees ! Estimated noise=7857.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84008e-05 Jy ! Component: 100 - total flux cleaned = -0.00092337 Jy ! Component: 150 - total flux cleaned = -0.00173813 Jy ! Component: 200 - total flux cleaned = -0.00206733 Jy ! Total flux subtracted in 200 components = -0.00206733 Jy ! Clean residual min=-0.005556 max=0.005592 Jy/beam ! Clean residual mean=-0.000019 rms=0.002062 Jy/beam ! Combined flux in latest and established models = 1.33315 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 1.33315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118513Jy sigma=0.000602 ! Fit after self-cal, rms=0.118306Jy sigma=0.000602 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118306Jy sigma=0.000602 ! Fit after self-cal, rms=0.118214Jy sigma=0.000601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=24.07 mas, bpa=5.544 degrees ! Estimated noise=7859.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00280529 Jy ! Component: 100 - total flux cleaned = -0.00335288 Jy ! Component: 150 - total flux cleaned = -0.00358168 Jy ! Component: 200 - total flux cleaned = -0.0037523 Jy ! Total flux subtracted in 200 components = -0.0037523 Jy ! Clean residual min=-0.003255 max=0.003267 Jy/beam ! Clean residual mean=-0.000002 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 1.32939 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 157 components and 1.32939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117209Jy sigma=0.000596 ! Fit after self-cal, rms=0.117188Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332331 Jy ! Component: 100 - total flux cleaned = 0.000321256 Jy ! Component: 150 - total flux cleaned = 5.07158e-06 Jy ! Component: 200 - total flux cleaned = -0.000141882 Jy ! Total flux subtracted in 200 components = -0.000141882 Jy ! Clean residual min=-0.002276 max=0.002247 Jy/beam ! Clean residual mean=0.000006 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 1.32925 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 196 components and 1.32925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116768Jy sigma=0.000594 ! Fit after self-cal, rms=0.116763Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116763Jy sigma=0.000594 ! Fit after self-cal, rms=0.116674Jy sigma=0.000594 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=24.08 mas, bpa=5.545 degrees ! Estimated noise=7860.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141331 Jy ! Component: 100 - total flux cleaned = 0.00170843 Jy ! Component: 150 - total flux cleaned = 0.00158108 Jy ! Component: 200 - total flux cleaned = 0.00134443 Jy ! Total flux subtracted in 200 components = 0.00134443 Jy ! Clean residual min=-0.001950 max=0.001930 Jy/beam ! Clean residual mean=0.000002 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 1.3306 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 223 components and 1.3306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116369Jy sigma=0.000593 ! Fit after self-cal, rms=0.116367Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517149 Jy ! Component: 100 - total flux cleaned = 0.000517362 Jy ! Component: 150 - total flux cleaned = 0.000419014 Jy ! Component: 200 - total flux cleaned = 0.000323167 Jy ! Total flux subtracted in 200 components = 0.000323167 Jy ! Clean residual min=-0.001556 max=0.001554 Jy/beam ! Clean residual mean=0.000000 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 1.33092 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 265 components and 1.33092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116194Jy sigma=0.000592 ! Fit after self-cal, rms=0.116193Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116193Jy sigma=0.000592 ! Fit after self-cal, rms=0.116168Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.274 mas, bmaj=29.83 mas, bpa=-5.129 degrees ! Estimated noise=9967.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305907 Jy ! Component: 100 - total flux cleaned = 0.000870528 Jy ! Component: 150 - total flux cleaned = 0.00121937 Jy ! Component: 200 - total flux cleaned = 0.00155097 Jy ! Total flux subtracted in 200 components = 0.00155097 Jy ! Clean residual min=-0.001356 max=0.001360 Jy/beam ! Clean residual mean=0.000004 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 1.33247 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 298 components and 1.33247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116040Jy sigma=0.000591 ! Fit after self-cal, rms=0.116039Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.57176e-05 Jy ! Component: 100 - total flux cleaned = 0.00012538 Jy ! Component: 150 - total flux cleaned = 0.000203166 Jy ! Component: 200 - total flux cleaned = 0.000349602 Jy ! Total flux subtracted in 200 components = 0.000349602 Jy ! Clean residual min=-0.001205 max=0.001198 Jy/beam ! Clean residual mean=0.000008 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 1.33282 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 321 components and 1.33282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115954Jy sigma=0.000591 ! Fit after self-cal, rms=0.115954Jy sigma=0.000591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=24.08 mas, bpa=5.546 degrees ! Estimated noise=7861.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.458 x 24.08 at 5.546 degrees (North through East) ! Clean map min=-0.014217 max=1.1273 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115954Jy sigma=0.000591 ! Fit after self-cal, rms=0.100857Jy sigma=0.000505 ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=24.08 mas, bpa=5.545 degrees ! Estimated noise=7862.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104451 Jy ! Component: 100 - total flux cleaned = -0.00160676 Jy ! Component: 150 - total flux cleaned = -0.00177538 Jy ! Component: 200 - total flux cleaned = -0.00209474 Jy ! Total flux subtracted in 200 components = -0.00209474 Jy ! Clean residual min=-0.001287 max=0.001277 Jy/beam ! Clean residual mean=0.000006 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 1.33072 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 359 components and 1.33073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100717Jy sigma=0.000505 ! Fit after self-cal, rms=0.100717Jy sigma=0.000505 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869111 Jy ! Component: 100 - total flux cleaned = 0.000940879 Jy ! Component: 150 - total flux cleaned = 0.00100928 Jy ! Component: 200 - total flux cleaned = 0.00107686 Jy ! Total flux subtracted in 200 components = 0.00107686 Jy ! Clean residual min=-0.001118 max=0.001125 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 1.3318 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 399 components and 1.3318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100623Jy sigma=0.000504 ! Fit after self-cal, rms=0.100624Jy sigma=0.000504 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100624Jy sigma=0.000504 ! Fit after self-cal, rms=0.100639Jy sigma=0.000504 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=24.28 mas, bpa=6.012 degrees ! Estimated noise=8711.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.944148 Jy ! Component: 100 - total flux cleaned = 1.15808 Jy ! Component: 150 - total flux cleaned = 1.24102 Jy ! Component: 200 - total flux cleaned = 1.27339 Jy ! Total flux subtracted in 200 components = 1.27339 Jy ! Clean residual min=-0.034586 max=0.034579 Jy/beam ! Clean residual mean=-0.000314 rms=0.012025 Jy/beam ! Combined flux in latest and established models = 1.27339 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 1.27339 Jy ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=24.09 mas, bpa=5.546 degrees ! Estimated noise=7864.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589469 Jy ! Component: 100 - total flux cleaned = 0.0734823 Jy ! Component: 150 - total flux cleaned = 0.0778206 Jy ! Component: 200 - total flux cleaned = 0.07443 Jy ! Total flux subtracted in 200 components = 0.07443 Jy ! Clean residual min=-0.013347 max=0.013329 Jy/beam ! Clean residual mean=-0.000106 rms=0.005290 Jy/beam ! Combined flux in latest and established models = 1.34782 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 117 components and 1.34782 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.275 mas, bmaj=29.84 mas, bpa=-5.131 degrees ! Estimated noise=9969.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00432016 Jy ! Component: 100 - total flux cleaned = -0.00306974 Jy ! Component: 150 - total flux cleaned = -0.00040778 Jy ! Component: 200 - total flux cleaned = 0.0018481 Jy ! Total flux subtracted in 200 components = 0.0018481 Jy ! Clean residual min=-0.005084 max=0.005114 Jy/beam ! Clean residual mean=-0.000026 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 1.34967 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605582 Jy ! Component: 100 - total flux cleaned = -4.21421e-06 Jy ! Component: 150 - total flux cleaned = -0.000630573 Jy ! Component: 200 - total flux cleaned = -0.00160859 Jy ! Total flux subtracted in 200 components = -0.00160859 Jy ! Clean residual min=-0.005676 max=0.005634 Jy/beam ! Clean residual mean=-0.000003 rms=0.002359 Jy/beam ! Combined flux in latest and established models = 1.34806 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 228 components and 1.34806 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=24.09 mas, bpa=5.546 degrees ! Estimated noise=7864.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00545689 Jy ! Component: 100 - total flux cleaned = -0.00509156 Jy ! Component: 150 - total flux cleaned = -0.00599012 Jy ! Component: 200 - total flux cleaned = -0.00708757 Jy ! Total flux subtracted in 200 components = -0.00708757 Jy ! Clean residual min=-0.004354 max=0.004335 Jy/beam ! Clean residual mean=-0.000016 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 1.34097 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 258 components and 1.34097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102156Jy sigma=0.000511 ! Fit after self-cal, rms=0.102017Jy sigma=0.000511 wmodel J0334-4008_S_2017_03_23_pus_map.mod ! Writing 258 model components to file: J0334-4008_S_2017_03_23_pus_map.mod wobs J0334-4008_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_03_23_pus_uvs.fits wwins J0334-4008_S_2017_03_23_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0334-4008_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.459 x 24.09 at 5.546 degrees (North through East) ! Clean map min=-0.010769 max=1.0964 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.09642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00138716 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.379551 0.379551 0.759103 1.51821 3.03641 6.07282 12.1456 24.2913 48.5826 97.1652 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.459 x 24.09 at 5.546 degrees (North through East) ! Clean map min=-0.010769 max=1.0964 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:47:04 2019