! Started logfile: J0334-4008_S_2017_02_24_pus_uvs.log on Sat May 4 11:16:48 2019 obs J0334-4008_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.5625 visibilities/baseline/integration-bin. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.380520Jy sigma=0.002047 ! Fit after self-cal, rms=0.372541Jy sigma=0.002009 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=8.494 mas, bpa=-1.743 degrees ! Estimated noise=4229.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.960277 Jy ! Component: 100 - total flux cleaned = 1.19237 Jy ! Total flux subtracted in 100 components = 1.19237 Jy ! Clean residual min=-0.048930 max=0.131011 Jy/beam ! Clean residual mean=-0.000372 rms=0.016688 Jy/beam ! Combined flux in latest and established models = 1.19237 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.19237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282317Jy sigma=0.001357 ! Fit after self-cal, rms=0.282323Jy sigma=0.001357 ! Inverting map ! Added new window around map position (4, -8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115131 Jy ! Component: 100 - total flux cleaned = 0.165489 Jy ! Total flux subtracted in 100 components = 0.165489 Jy ! Clean residual min=-0.039324 max=0.089989 Jy/beam ! Clean residual mean=-0.000130 rms=0.010894 Jy/beam ! Combined flux in latest and established models = 1.35786 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 1.35786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231013Jy sigma=0.001030 ! Fit after self-cal, rms=0.226191Jy sigma=0.000997 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=10.21 mas, bpa=0.5513 degrees ! Estimated noise=3667.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670474 Jy ! Component: 100 - total flux cleaned = 0.0898058 Jy ! Component: 150 - total flux cleaned = 0.0921181 Jy ! Component: 200 - total flux cleaned = 0.0950128 Jy ! Total flux subtracted in 200 components = 0.0950128 Jy ! Clean residual min=-0.027336 max=0.026594 Jy/beam ! Clean residual mean=0.000100 rms=0.007020 Jy/beam ! Combined flux in latest and established models = 1.45287 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 1.45287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196477Jy sigma=0.000881 ! Fit after self-cal, rms=0.196243Jy sigma=0.000879 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.51 KP 0.99 ! LA 0.99 MK 0.97 NL 1.00 OV 1.00 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.54 KP 0.95 ! LA 0.96 MK 0.96 NL 1.02 OV 1.05 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.43 KP 1.04 ! LA 1.00 MK 1.01 NL 1.17 OV 0.95 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.24 KP 1.00* ! LA 0.98 MK 0.98 NL 1.00* OV 0.94 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.196243Jy sigma=0.000879 ! Fit after self-cal, rms=0.171317Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=10.11 mas, bpa=0.5532 degrees ! Estimated noise=3738.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00950696 Jy ! Component: 100 - total flux cleaned = -0.010628 Jy ! Component: 150 - total flux cleaned = -0.0109409 Jy ! Component: 200 - total flux cleaned = -0.0112315 Jy ! Total flux subtracted in 200 components = -0.0112315 Jy ! Clean residual min=-0.017750 max=0.015830 Jy/beam ! Clean residual mean=0.000005 rms=0.004281 Jy/beam ! Combined flux in latest and established models = 1.44164 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 1.44164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169704Jy sigma=0.000713 ! Fit after self-cal, rms=0.169764Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169764Jy sigma=0.000713 ! Fit after self-cal, rms=0.167981Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=10.12 mas, bpa=0.6279 degrees ! Estimated noise=3736.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00676168 Jy ! Component: 100 - total flux cleaned = -0.00789278 Jy ! Component: 150 - total flux cleaned = -0.00838819 Jy ! Component: 200 - total flux cleaned = -0.00882438 Jy ! Total flux subtracted in 200 components = -0.00882438 Jy ! Clean residual min=-0.014869 max=0.014427 Jy/beam ! Clean residual mean=-0.000002 rms=0.003647 Jy/beam ! Combined flux in latest and established models = 1.43282 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 1.43282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167120Jy sigma=0.000685 ! Fit after self-cal, rms=0.167043Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.59187e-05 Jy ! Component: 100 - total flux cleaned = -4.07733e-05 Jy ! Component: 150 - total flux cleaned = -0.000211209 Jy ! Component: 200 - total flux cleaned = -0.000365654 Jy ! Total flux subtracted in 200 components = -0.000365654 Jy ! Clean residual min=-0.014370 max=0.013811 Jy/beam ! Clean residual mean=-0.000003 rms=0.003554 Jy/beam ! Combined flux in latest and established models = 1.43245 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 1.43245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166676Jy sigma=0.000682 ! Fit after self-cal, rms=0.166593Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166593Jy sigma=0.000682 ! Fit after self-cal, rms=0.166890Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=10.12 mas, bpa=0.6762 degrees ! Estimated noise=3735.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00592879 Jy ! Component: 100 - total flux cleaned = -0.00687982 Jy ! Component: 150 - total flux cleaned = -0.00721622 Jy ! Component: 200 - total flux cleaned = -0.00737336 Jy ! Total flux subtracted in 200 components = -0.00737336 Jy ! Clean residual min=-0.012895 max=0.013429 Jy/beam ! Clean residual mean=-0.000035 rms=0.003117 Jy/beam ! Combined flux in latest and established models = 1.42508 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 1.42508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166422Jy sigma=0.000668 ! Fit after self-cal, rms=0.166386Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767741 Jy ! Component: 100 - total flux cleaned = 0.00891035 Jy ! Component: 150 - total flux cleaned = 0.00955587 Jy ! Component: 200 - total flux cleaned = 0.00956298 Jy ! Total flux subtracted in 200 components = 0.00956298 Jy ! Clean residual min=-0.011640 max=0.010026 Jy/beam ! Clean residual mean=-0.000001 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 1.43464 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 1.43464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164996Jy sigma=0.000662 ! Fit after self-cal, rms=0.164908Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164908Jy sigma=0.000662 ! Fit after self-cal, rms=0.165885Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.847 mas, bmaj=31.23 mas, bpa=-1.019 degrees ! Estimated noise=4469.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595206 Jy ! Component: 100 - total flux cleaned = 0.00102255 Jy ! Component: 150 - total flux cleaned = 0.000711514 Jy ! Component: 200 - total flux cleaned = 0.000433118 Jy ! Total flux subtracted in 200 components = 0.000433118 Jy ! Clean residual min=-0.011366 max=0.009974 Jy/beam ! Clean residual mean=-0.000014 rms=0.003053 Jy/beam ! Combined flux in latest and established models = 1.43507 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 1.43507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165629Jy sigma=0.000660 ! Fit after self-cal, rms=0.165585Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000600123 Jy ! Component: 100 - total flux cleaned = -0.000599392 Jy ! Component: 150 - total flux cleaned = -0.000679563 Jy ! Component: 200 - total flux cleaned = -0.000752607 Jy ! Total flux subtracted in 200 components = -0.000752607 Jy ! Clean residual min=-0.011168 max=0.009494 Jy/beam ! Clean residual mean=-0.000020 rms=0.003007 Jy/beam ! Combined flux in latest and established models = 1.43432 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 113 components and 1.43432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165532Jy sigma=0.000660 ! Fit after self-cal, rms=0.165505Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=10.13 mas, bpa=0.6401 degrees ! Estimated noise=3733.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 10.13 at 0.6401 degrees (North through East) ! Clean map min=-0.013816 max=1.1068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165505Jy sigma=0.000660 ! Fit after self-cal, rms=0.155674Jy sigma=0.000593 ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=10.13 mas, bpa=0.6479 degrees ! Estimated noise=3730.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522662 Jy ! Component: 100 - total flux cleaned = -0.00134467 Jy ! Component: 150 - total flux cleaned = -0.00148837 Jy ! Component: 200 - total flux cleaned = -0.0016225 Jy ! Total flux subtracted in 200 components = -0.0016225 Jy ! Clean residual min=-0.010910 max=0.010770 Jy/beam ! Clean residual mean=-0.000026 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 1.4327 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 1.4327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155223Jy sigma=0.000592 ! Fit after self-cal, rms=0.155209Jy sigma=0.000592 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574503 Jy ! Component: 100 - total flux cleaned = 0.000451761 Jy ! Component: 150 - total flux cleaned = 0.000453571 Jy ! Component: 200 - total flux cleaned = 0.00045675 Jy ! Total flux subtracted in 200 components = 0.00045675 Jy ! Clean residual min=-0.010802 max=0.010250 Jy/beam ! Clean residual mean=-0.000023 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 1.43316 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 1.43316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154964Jy sigma=0.000591 ! Fit after self-cal, rms=0.154954Jy sigma=0.000591 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154954Jy sigma=0.000591 ! Fit after self-cal, rms=0.155399Jy sigma=0.000590 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=8.376 mas, bpa=-1.653 degrees ! Estimated noise=4317.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.97968 Jy ! Component: 100 - total flux cleaned = 1.20333 Jy ! Component: 150 - total flux cleaned = 1.2885 Jy ! Component: 200 - total flux cleaned = 1.33366 Jy ! Total flux subtracted in 200 components = 1.33366 Jy ! Clean residual min=-0.026753 max=0.029243 Jy/beam ! Clean residual mean=-0.000166 rms=0.005311 Jy/beam ! Combined flux in latest and established models = 1.33366 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.33366 Jy ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=10.13 mas, bpa=0.6588 degrees ! Estimated noise=3727.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358304 Jy ! Component: 100 - total flux cleaned = 0.0573222 Jy ! Component: 150 - total flux cleaned = 0.0720814 Jy ! Component: 200 - total flux cleaned = 0.0795817 Jy ! Total flux subtracted in 200 components = 0.0795817 Jy ! Clean residual min=-0.013615 max=0.011486 Jy/beam ! Clean residual mean=-0.000113 rms=0.003062 Jy/beam ! Combined flux in latest and established models = 1.41324 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 71 components and 1.41324 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.86 mas, bmaj=31.29 mas, bpa=-1.025 degrees ! Estimated noise=4455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826023 Jy ! Component: 100 - total flux cleaned = 0.0132636 Jy ! Component: 150 - total flux cleaned = 0.0156536 Jy ! Component: 200 - total flux cleaned = 0.0163461 Jy ! Total flux subtracted in 200 components = 0.0163461 Jy ! Clean residual min=-0.011391 max=0.010292 Jy/beam ! Clean residual mean=-0.000061 rms=0.002994 Jy/beam ! Combined flux in latest and established models = 1.42958 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210347 Jy ! Component: 100 - total flux cleaned = 0.00060662 Jy ! Component: 150 - total flux cleaned = 0.000793377 Jy ! Component: 200 - total flux cleaned = 0.0010583 Jy ! Total flux subtracted in 200 components = 0.0010583 Jy ! Clean residual min=-0.011113 max=0.009927 Jy/beam ! Clean residual mean=-0.000053 rms=0.002932 Jy/beam ! Combined flux in latest and established models = 1.43064 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 97 components and 1.43064 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=10.13 mas, bpa=0.6588 degrees ! Estimated noise=3727.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00401739 Jy ! Component: 100 - total flux cleaned = -0.00427381 Jy ! Component: 150 - total flux cleaned = -0.00451861 Jy ! Component: 200 - total flux cleaned = -0.0045315 Jy ! Total flux subtracted in 200 components = -0.0045315 Jy ! Clean residual min=-0.012026 max=0.010244 Jy/beam ! Clean residual mean=-0.000058 rms=0.002647 Jy/beam ! Combined flux in latest and established models = 1.42611 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 1.42611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155314Jy sigma=0.000594 ! Fit after self-cal, rms=0.155191Jy sigma=0.000593 wmodel J0334-4008_S_2017_02_24_pus_map.mod ! Writing 110 model components to file: J0334-4008_S_2017_02_24_pus_map.mod wobs J0334-4008_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_02_24_pus_uvs.fits wwins J0334-4008_S_2017_02_24_pus_map.win ! wwins: Wrote 5 windows to J0334-4008_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00529102 Jy ! Component: 100 - total flux cleaned = -0.00986161 Jy ! Component: 150 - total flux cleaned = -0.0124929 Jy ! Component: 200 - total flux cleaned = -0.0151035 Jy ! Component: 250 - total flux cleaned = -0.0172653 Jy ! Component: 300 - total flux cleaned = -0.0191729 Jy ! Component: 350 - total flux cleaned = -0.0204335 Jy ! Component: 400 - total flux cleaned = -0.021509 Jy ! Component: 450 - total flux cleaned = -0.0218955 Jy ! Component: 500 - total flux cleaned = -0.0230154 Jy ! Component: 550 - total flux cleaned = -0.0239708 Jy ! Component: 600 - total flux cleaned = -0.0246653 Jy ! Component: 650 - total flux cleaned = -0.0253407 Jy ! Component: 700 - total flux cleaned = -0.0263196 Jy ! Component: 750 - total flux cleaned = -0.0266345 Jy ! Component: 800 - total flux cleaned = -0.027149 Jy ! Component: 850 - total flux cleaned = -0.0272497 Jy ! Component: 900 - total flux cleaned = -0.0273475 Jy ! Component: 950 - total flux cleaned = -0.027347 Jy ! Component: 1000 - total flux cleaned = -0.0273494 Jy ! Component: 1050 - total flux cleaned = -0.02772 Jy ! Component: 1100 - total flux cleaned = -0.02781 Jy ! Component: 1150 - total flux cleaned = -0.0278098 Jy ! Component: 1200 - total flux cleaned = -0.0280728 Jy ! Component: 1250 - total flux cleaned = -0.0279881 Jy ! Component: 1300 - total flux cleaned = -0.0281586 Jy ! Component: 1350 - total flux cleaned = -0.0282407 Jy ! Component: 1400 - total flux cleaned = -0.0281591 Jy ! Component: 1450 - total flux cleaned = -0.0283199 Jy ! Component: 1500 - total flux cleaned = -0.0283199 Jy ! Component: 1550 - total flux cleaned = -0.0283976 Jy ! Component: 1600 - total flux cleaned = -0.0283974 Jy ! Component: 1650 - total flux cleaned = -0.0282455 Jy ! Component: 1700 - total flux cleaned = -0.0283955 Jy ! Component: 1750 - total flux cleaned = -0.0283944 Jy ! Component: 1800 - total flux cleaned = -0.0283222 Jy ! Component: 1850 - total flux cleaned = -0.0282504 Jy ! Component: 1900 - total flux cleaned = -0.028179 Jy ! Component: 1950 - total flux cleaned = -0.0280373 Jy ! Component: 2000 - total flux cleaned = -0.0276884 Jy ! Component: 2050 - total flux cleaned = -0.02762 Jy ! Component: 2100 - total flux cleaned = -0.027348 Jy ! Component: 2150 - total flux cleaned = -0.0272143 Jy ! Component: 2200 - total flux cleaned = -0.0268822 Jy ! Component: 2250 - total flux cleaned = -0.0265532 Jy ! Component: 2300 - total flux cleaned = -0.0264225 Jy ! Component: 2350 - total flux cleaned = -0.0262293 Jy ! Component: 2400 - total flux cleaned = -0.0259737 Jy ! Component: 2450 - total flux cleaned = -0.0257206 Jy ! Component: 2500 - total flux cleaned = -0.0256582 Jy ! Component: 2550 - total flux cleaned = -0.0252844 Jy ! Component: 2600 - total flux cleaned = -0.0254091 Jy ! Component: 2650 - total flux cleaned = -0.0254091 Jy ! Component: 2700 - total flux cleaned = -0.0251667 Jy ! Component: 2750 - total flux cleaned = -0.0252874 Jy ! Component: 2800 - total flux cleaned = -0.0251087 Jy ! Component: 2850 - total flux cleaned = -0.0250496 Jy ! Component: 2900 - total flux cleaned = -0.0251675 Jy ! Component: 2950 - total flux cleaned = -0.0252254 Jy ! Component: 3000 - total flux cleaned = -0.0253989 Jy ! Component: 3050 - total flux cleaned = -0.0253411 Jy ! Component: 3100 - total flux cleaned = -0.0253414 Jy ! Component: 3150 - total flux cleaned = -0.0253412 Jy ! Component: 3200 - total flux cleaned = -0.0253969 Jy ! Component: 3250 - total flux cleaned = -0.025286 Jy ! Component: 3300 - total flux cleaned = -0.025286 Jy ! Component: 3350 - total flux cleaned = -0.0253956 Jy ! Component: 3400 - total flux cleaned = -0.025286 Jy ! Component: 3450 - total flux cleaned = -0.0252864 Jy ! Component: 3500 - total flux cleaned = -0.0252319 Jy ! Component: 3550 - total flux cleaned = -0.0252316 Jy ! Component: 3600 - total flux cleaned = -0.0251254 Jy ! Component: 3650 - total flux cleaned = -0.024914 Jy ! Component: 3700 - total flux cleaned = -0.0249141 Jy ! Component: 3750 - total flux cleaned = -0.0247576 Jy ! Component: 3800 - total flux cleaned = -0.0250178 Jy ! Component: 3850 - total flux cleaned = -0.0249655 Jy ! Component: 3900 - total flux cleaned = -0.0248625 Jy ! Component: 3950 - total flux cleaned = -0.0250167 Jy ! Component: 4000 - total flux cleaned = -0.0249142 Jy ! Component: 4050 - total flux cleaned = -0.024914 Jy ! Total flux subtracted in 4096 components = -0.025016 Jy ! Clean residual min=-0.002793 max=0.002817 Jy/beam ! Clean residual mean=0.000004 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 1.40109 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 403 components and 1.4011 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.273 x 10.13 at 0.6588 degrees (North through East) ! Clean map min=-0.0089976 max=1.1458 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.14582 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000995943 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.260759 0.260759 0.521518 1.04304 2.08607 4.17214 8.34428 16.6886 33.3771 66.7543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.273 x 10.13 at 0.6588 degrees (North through East) ! Clean map min=-0.0089976 max=1.1458 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:16:53 2019