! Started logfile: J0334-4008_S_2017_02_19_pus_uvs.log on Sat May 4 18:40:53 2019 obs J0334-4008_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0334-4008_S_2017_02_19_pus_uva.fits ! AN table 1: 2 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0334-4008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-4008_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.522412Jy sigma=0.002804 ! Fit after self-cal, rms=0.370190Jy sigma=0.001910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.255 mas, bmaj=6.635 mas, bpa=-7.566 degrees ! Estimated noise=12101.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.931142 Jy ! Component: 100 - total flux cleaned = 1.14187 Jy ! Total flux subtracted in 100 components = 1.14187 Jy ! Clean residual min=-0.083408 max=0.115703 Jy/beam ! Clean residual mean=0.000340 rms=0.027132 Jy/beam ! Combined flux in latest and established models = 1.14187 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.14187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296073Jy sigma=0.001467 ! Fit after self-cal, rms=0.296077Jy sigma=0.001467 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=7.389 mas, bpa=-7.294 degrees ! Estimated noise=11169.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116908 Jy ! Component: 100 - total flux cleaned = 0.174829 Jy ! Component: 150 - total flux cleaned = 0.206674 Jy ! Component: 200 - total flux cleaned = 0.225221 Jy ! Total flux subtracted in 200 components = 0.225221 Jy ! Clean residual min=-0.065183 max=0.075967 Jy/beam ! Clean residual mean=0.000225 rms=0.020734 Jy/beam ! Combined flux in latest and established models = 1.36709 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 1.36709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245072Jy sigma=0.001182 ! Fit after self-cal, rms=0.245051Jy sigma=0.001182 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.05 ! LA 1.02 MK 0.99 NL 1.00* OV 1.04 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.04 ! LA 1.00 MK 0.96 NL 1.19 OV 1.12 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.89 ! LA 0.74 MK 1.04 NL 1.47 OV 0.97 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.00* ! LA 0.79 MK 1.08 NL 1.00* OV 0.95 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.245051Jy sigma=0.001182 ! Fit after self-cal, rms=0.118340Jy sigma=0.000615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=7.395 mas, bpa=-7.182 degrees ! Estimated noise=11154.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126847 Jy ! Component: 100 - total flux cleaned = -0.00127419 Jy ! Component: 150 - total flux cleaned = -0.00128122 Jy ! Component: 200 - total flux cleaned = -0.00145049 Jy ! Total flux subtracted in 200 components = -0.00145049 Jy ! Clean residual min=-0.030191 max=0.028017 Jy/beam ! Clean residual mean=-0.000041 rms=0.007589 Jy/beam ! Combined flux in latest and established models = 1.36564 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 1.36564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117830Jy sigma=0.000612 ! Fit after self-cal, rms=0.117939Jy sigma=0.000611 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117939Jy sigma=0.000611 ! Fit after self-cal, rms=0.117884Jy sigma=0.000611 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=7.396 mas, bpa=-7.183 degrees ! Estimated noise=11147.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145788 Jy ! Component: 100 - total flux cleaned = -0.00145047 Jy ! Component: 150 - total flux cleaned = -0.00146482 Jy ! Component: 200 - total flux cleaned = -0.00133305 Jy ! Total flux subtracted in 200 components = -0.00133305 Jy ! Clean residual min=-0.029996 max=0.027307 Jy/beam ! Clean residual mean=-0.000041 rms=0.007504 Jy/beam ! Combined flux in latest and established models = 1.3643 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 1.3643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117429Jy sigma=0.000610 ! Fit after self-cal, rms=0.117453Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300078 Jy ! Component: 100 - total flux cleaned = -0.000306373 Jy ! Component: 150 - total flux cleaned = -0.000167088 Jy ! Component: 200 - total flux cleaned = -0.000161797 Jy ! Total flux subtracted in 200 components = -0.000161797 Jy ! Clean residual min=-0.030026 max=0.027106 Jy/beam ! Clean residual mean=-0.000041 rms=0.007474 Jy/beam ! Combined flux in latest and established models = 1.36414 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 1.36414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117097Jy sigma=0.000609 ! Fit after self-cal, rms=0.117110Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117110Jy sigma=0.000609 ! Fit after self-cal, rms=0.117039Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=7.397 mas, bpa=-7.177 degrees ! Estimated noise=11142.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133 Jy ! Component: 100 - total flux cleaned = -0.00134392 Jy ! Component: 150 - total flux cleaned = -0.0014595 Jy ! Component: 200 - total flux cleaned = -0.00145805 Jy ! Total flux subtracted in 200 components = -0.00145805 Jy ! Clean residual min=-0.029994 max=0.027096 Jy/beam ! Clean residual mean=-0.000041 rms=0.007433 Jy/beam ! Combined flux in latest and established models = 1.36268 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 1.36268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116752Jy sigma=0.000608 ! Fit after self-cal, rms=0.116754Jy sigma=0.000608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117684 Jy ! Component: 100 - total flux cleaned = -0.000121217 Jy ! Component: 150 - total flux cleaned = -0.00022967 Jy ! Component: 200 - total flux cleaned = -0.000327579 Jy ! Total flux subtracted in 200 components = -0.000327579 Jy ! Clean residual min=-0.029924 max=0.027089 Jy/beam ! Clean residual mean=-0.000041 rms=0.007416 Jy/beam ! Combined flux in latest and established models = 1.36236 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 1.36236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116522Jy sigma=0.000607 ! Fit after self-cal, rms=0.116513Jy sigma=0.000607 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116513Jy sigma=0.000607 ! Fit after self-cal, rms=0.116457Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.018 mas, bmaj=24.22 mas, bpa=-2.915 degrees ! Estimated noise=16235.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000731583 Jy ! Component: 100 - total flux cleaned = -0.000735376 Jy ! Component: 150 - total flux cleaned = -0.000733804 Jy ! Component: 200 - total flux cleaned = -0.000585173 Jy ! Total flux subtracted in 200 components = -0.000585173 Jy ! Clean residual min=-0.029603 max=0.028823 Jy/beam ! Clean residual mean=-0.000096 rms=0.011037 Jy/beam ! Combined flux in latest and established models = 1.36177 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 1.36177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116957Jy sigma=0.000608 ! Fit after self-cal, rms=0.116560Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181225 Jy ! Component: 100 - total flux cleaned = 0.000174629 Jy ! Component: 150 - total flux cleaned = 0.000319172 Jy ! Component: 200 - total flux cleaned = 0.000450122 Jy ! Total flux subtracted in 200 components = 0.000450122 Jy ! Clean residual min=-0.029580 max=0.028607 Jy/beam ! Clean residual mean=-0.000099 rms=0.010952 Jy/beam ! Combined flux in latest and established models = 1.36222 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 1.36222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117175Jy sigma=0.000609 ! Fit after self-cal, rms=0.116922Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=7.398 mas, bpa=-7.173 degrees ! Estimated noise=11136.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.561 x 7.398 at -7.173 degrees (North through East) ! Clean map min=-0.028612 max=1.2064 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116922Jy sigma=0.000609 ! Fit after self-cal, rms=0.109682Jy sigma=0.000569 ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=7.397 mas, bpa=-7.008 degrees ! Estimated noise=11169.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120457 Jy ! Component: 100 - total flux cleaned = 0.000721741 Jy ! Component: 150 - total flux cleaned = 0.000574368 Jy ! Component: 200 - total flux cleaned = 0.000430832 Jy ! Total flux subtracted in 200 components = 0.000430832 Jy ! Clean residual min=-0.030293 max=0.026203 Jy/beam ! Clean residual mean=-0.000042 rms=0.007253 Jy/beam ! Combined flux in latest and established models = 1.36265 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 1.36265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109166Jy sigma=0.000566 ! Fit after self-cal, rms=0.109149Jy sigma=0.000566 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121294 Jy ! Component: 100 - total flux cleaned = -0.000125113 Jy ! Component: 150 - total flux cleaned = -0.000127651 Jy ! Component: 200 - total flux cleaned = -0.000129407 Jy ! Total flux subtracted in 200 components = -0.000129407 Jy ! Clean residual min=-0.030352 max=0.026293 Jy/beam ! Clean residual mean=-0.000042 rms=0.007225 Jy/beam ! Combined flux in latest and established models = 1.36252 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 1.36252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108844Jy sigma=0.000565 ! Fit after self-cal, rms=0.108851Jy sigma=0.000565 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108851Jy sigma=0.000565 ! Fit after self-cal, rms=0.108754Jy sigma=0.000565 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.256 mas, bmaj=6.625 mas, bpa=-7.193 degrees ! Estimated noise=12252.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.942705 Jy ! Component: 100 - total flux cleaned = 1.1569 Jy ! Component: 150 - total flux cleaned = 1.24631 Jy ! Component: 200 - total flux cleaned = 1.29639 Jy ! Total flux subtracted in 200 components = 1.29639 Jy ! Clean residual min=-0.036663 max=0.037596 Jy/beam ! Clean residual mean=0.000043 rms=0.010038 Jy/beam ! Combined flux in latest and established models = 1.29639 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.29639 Jy ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=7.396 mas, bpa=-7.003 degrees ! Estimated noise=11160.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317667 Jy ! Component: 100 - total flux cleaned = 0.047503 Jy ! Component: 150 - total flux cleaned = 0.055726 Jy ! Component: 200 - total flux cleaned = 0.0580058 Jy ! Total flux subtracted in 200 components = 0.0580058 Jy ! Clean residual min=-0.029700 max=0.029157 Jy/beam ! Clean residual mean=-0.000022 rms=0.007819 Jy/beam ! Combined flux in latest and established models = 1.35439 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 1.35439 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.021 mas, bmaj=24.24 mas, bpa=-2.794 degrees ! Estimated noise=16245.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343893 Jy ! Component: 100 - total flux cleaned = 0.00396395 Jy ! Component: 150 - total flux cleaned = 0.00420367 Jy ! Component: 200 - total flux cleaned = 0.0044419 Jy ! Total flux subtracted in 200 components = 0.0044419 Jy ! Clean residual min=-0.030135 max=0.030511 Jy/beam ! Clean residual mean=-0.000072 rms=0.012389 Jy/beam ! Combined flux in latest and established models = 1.35884 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226468 Jy ! Component: 100 - total flux cleaned = 0.000651897 Jy ! Component: 150 - total flux cleaned = 0.000859899 Jy ! Component: 200 - total flux cleaned = 0.00105281 Jy ! Total flux subtracted in 200 components = 0.00105281 Jy ! Clean residual min=-0.029617 max=0.030128 Jy/beam ! Clean residual mean=-0.000079 rms=0.011882 Jy/beam ! Combined flux in latest and established models = 1.35989 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 29 components and 1.35989 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=7.396 mas, bpa=-7.003 degrees ! Estimated noise=11160.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103695 Jy ! Component: 100 - total flux cleaned = -0.001705 Jy ! Component: 150 - total flux cleaned = -0.00223269 Jy ! Component: 200 - total flux cleaned = -0.00268328 Jy ! Total flux subtracted in 200 components = -0.00268328 Jy ! Clean residual min=-0.030013 max=0.027784 Jy/beam ! Clean residual mean=-0.000030 rms=0.007515 Jy/beam ! Combined flux in latest and established models = 1.35721 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 1.35721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109940Jy sigma=0.000571 ! Fit after self-cal, rms=0.109794Jy sigma=0.000571 wmodel J0334-4008_S_2017_02_19_pus_map.mod ! Writing 39 model components to file: J0334-4008_S_2017_02_19_pus_map.mod wobs J0334-4008_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0334-4008_S_2017_02_19_pus_uvs.fits wwins J0334-4008_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0334-4008_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00189256 Jy ! Component: 100 - total flux cleaned = -0.00191216 Jy ! Component: 150 - total flux cleaned = -0.00112686 Jy ! Component: 200 - total flux cleaned = 0.000951243 Jy ! Component: 250 - total flux cleaned = 0.00159629 Jy ! Component: 300 - total flux cleaned = 0.00274973 Jy ! Component: 350 - total flux cleaned = 0.00383746 Jy ! Component: 400 - total flux cleaned = 0.00461003 Jy ! Component: 450 - total flux cleaned = 0.00461054 Jy ! Component: 500 - total flux cleaned = 0.00438054 Jy ! Component: 550 - total flux cleaned = 0.00438361 Jy ! Component: 600 - total flux cleaned = 0.00418516 Jy ! Component: 650 - total flux cleaned = 0.00299998 Jy ! Component: 700 - total flux cleaned = 0.0026256 Jy ! Component: 750 - total flux cleaned = 0.00134206 Jy ! Component: 800 - total flux cleaned = 0.000289666 Jy ! Component: 850 - total flux cleaned = -0.000386018 Jy ! Component: 900 - total flux cleaned = -5.10596e-05 Jy ! Component: 950 - total flux cleaned = -0.00021458 Jy ! Component: 1000 - total flux cleaned = -0.000374827 Jy ! Component: 1050 - total flux cleaned = -0.000533109 Jy ! Component: 1100 - total flux cleaned = -0.000840515 Jy ! Component: 1150 - total flux cleaned = -0.00128987 Jy ! Component: 1200 - total flux cleaned = -0.00143812 Jy ! Component: 1250 - total flux cleaned = -0.00173033 Jy ! Component: 1300 - total flux cleaned = -0.00144251 Jy ! Component: 1350 - total flux cleaned = -0.0015838 Jy ! Component: 1400 - total flux cleaned = -0.00158577 Jy ! Component: 1450 - total flux cleaned = -0.00144344 Jy ! Component: 1500 - total flux cleaned = -0.00129902 Jy ! Component: 1550 - total flux cleaned = -0.00129648 Jy ! Component: 1600 - total flux cleaned = -0.0012961 Jy ! Component: 1650 - total flux cleaned = -0.00129836 Jy ! Component: 1700 - total flux cleaned = -0.00144842 Jy ! Component: 1750 - total flux cleaned = -0.00144982 Jy ! Component: 1800 - total flux cleaned = -0.00160704 Jy ! Component: 1850 - total flux cleaned = -0.00176628 Jy ! Component: 1900 - total flux cleaned = -0.00193264 Jy ! Component: 1950 - total flux cleaned = -0.00193622 Jy ! Component: 2000 - total flux cleaned = -0.00193375 Jy ! Component: 2050 - total flux cleaned = -0.00192829 Jy ! Component: 2100 - total flux cleaned = -0.0019264 Jy ! Component: 2150 - total flux cleaned = -0.00173192 Jy ! Component: 2200 - total flux cleaned = -0.00172872 Jy ! Component: 2250 - total flux cleaned = -0.00152097 Jy ! Component: 2300 - total flux cleaned = -0.00173369 Jy ! Component: 2350 - total flux cleaned = -0.00173355 Jy ! Component: 2400 - total flux cleaned = -0.0017352 Jy ! Component: 2450 - total flux cleaned = -0.00173907 Jy ! Component: 2500 - total flux cleaned = -0.00173987 Jy ! Component: 2550 - total flux cleaned = -0.00174056 Jy ! Component: 2600 - total flux cleaned = -0.00173577 Jy ! Component: 2650 - total flux cleaned = -0.00173166 Jy ! Component: 2700 - total flux cleaned = -0.001731 Jy ! Component: 2750 - total flux cleaned = -0.00173073 Jy ! Component: 2800 - total flux cleaned = -0.00173015 Jy ! Component: 2850 - total flux cleaned = -0.00173579 Jy ! Component: 2900 - total flux cleaned = -0.00206246 Jy ! Component: 2950 - total flux cleaned = -0.00205782 Jy ! Component: 3000 - total flux cleaned = -0.00206456 Jy ! Component: 3050 - total flux cleaned = -0.00244459 Jy ! Component: 3100 - total flux cleaned = -0.00244918 Jy ! Component: 3150 - total flux cleaned = -0.00204776 Jy ! Component: 3200 - total flux cleaned = -0.00203909 Jy ! Component: 3250 - total flux cleaned = -0.00204532 Jy ! Component: 3300 - total flux cleaned = -0.00159816 Jy ! Component: 3350 - total flux cleaned = -0.00159498 Jy ! Component: 3400 - total flux cleaned = -0.00110859 Jy ! Component: 3450 - total flux cleaned = -0.00110561 Jy ! Component: 3500 - total flux cleaned = -0.00110381 Jy ! Component: 3550 - total flux cleaned = -0.000561164 Jy ! Component: 3600 - total flux cleaned = 8.70065e-06 Jy ! Component: 3650 - total flux cleaned = 1.45274e-05 Jy ! Component: 3700 - total flux cleaned = 0.00063283 Jy ! Component: 3750 - total flux cleaned = 0.000635915 Jy ! Component: 3800 - total flux cleaned = 0.00131284 Jy ! Component: 3850 - total flux cleaned = 0.0013047 Jy ! Component: 3900 - total flux cleaned = 0.00201678 Jy ! Component: 3950 - total flux cleaned = 0.00277918 Jy ! Component: 4000 - total flux cleaned = 0.00278322 Jy ! Component: 4050 - total flux cleaned = 0.00278774 Jy ! Total flux subtracted in 4096 components = 0.00362491 Jy ! Clean residual min=-0.049817 max=0.054049 Jy/beam ! Clean residual mean=0.000009 rms=0.011279 Jy/beam ! Combined flux in latest and established models = 1.36083 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 187 components and 1.36083 Jy ![Exited script file: muppet] wmap "J0334-4008_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.563 x 7.396 at -7.003 degrees (North through East) ! Clean map min=-0.065051 max=1.2101 Jy/beam ! Writing clean map to FITS file: J0334-4008_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.21011 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0111284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.75885 2.75885 5.5177 11.0354 22.0708 44.1416 88.2832 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0333 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.21 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.563 x 7.396 at -7.003 degrees (North through East) ! Clean map min=-0.065051 max=1.2101 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-4008_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:40:58 2019