! Started logfile: J0334-3725_S_2017_06_10_pus_uvs.log on Mon May 6 14:44:11 2019 obs J0334-3725_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0334-3725_S_2017_06_10_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.611787 visibilities/baseline/integration-bin. ! Found source: J0334-3725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 12664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334-3725_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.645219Jy sigma=0.004276 ! Fit after self-cal, rms=0.572494Jy sigma=0.003799 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.324 mas, bmaj=6.301 mas, bpa=-2.875 degrees ! Estimated noise=1982.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.33873 Jy ! Component: 100 - total flux cleaned = 0.412595 Jy ! Total flux subtracted in 100 components = 0.412595 Jy ! Clean residual min=-0.011345 max=0.021942 Jy/beam ! Clean residual mean=0.000047 rms=0.003753 Jy/beam ! Combined flux in latest and established models = 0.412595 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.412595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117747Jy sigma=0.000749 ! Fit after self-cal, rms=0.117746Jy sigma=0.000749 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.37 mas, bpa=-2.667 degrees ! Estimated noise=1157.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266408 Jy ! Component: 100 - total flux cleaned = 0.037811 Jy ! Component: 150 - total flux cleaned = 0.0429927 Jy ! Component: 200 - total flux cleaned = 0.0449824 Jy ! Total flux subtracted in 200 components = 0.0449824 Jy ! Clean residual min=-0.008009 max=0.009784 Jy/beam ! Clean residual mean=0.000014 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.457577 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.457577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113207Jy sigma=0.000708 ! Fit after self-cal, rms=0.113203Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.04 ! LA 1.01 MK 1.00 NL 1.00* OV 1.00 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.97 ! LA 0.97 MK 1.00 NL 1.00* OV 1.03 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.98 ! LA 0.95 MK 1.03 NL 1.34 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.00* ! LA 0.96 MK 0.93 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.113203Jy sigma=0.000708 ! Fit after self-cal, rms=0.113208Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.327 mas, bpa=-2.22 degrees ! Estimated noise=1167.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203589 Jy ! Component: 100 - total flux cleaned = -0.000207519 Jy ! Component: 150 - total flux cleaned = -0.000207936 Jy ! Component: 200 - total flux cleaned = -0.000239102 Jy ! Total flux subtracted in 200 components = -0.000239102 Jy ! Clean residual min=-0.006024 max=0.006210 Jy/beam ! Clean residual mean=0.000051 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.457338 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.457338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113163Jy sigma=0.000679 ! Fit after self-cal, rms=0.113293Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113293Jy sigma=0.000679 ! Fit after self-cal, rms=0.111940Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.334 mas, bpa=-2.203 degrees ! Estimated noise=1168.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000469107 Jy ! Component: 100 - total flux cleaned = 0.000468992 Jy ! Component: 150 - total flux cleaned = 0.000468407 Jy ! Component: 200 - total flux cleaned = 0.000468731 Jy ! Total flux subtracted in 200 components = 0.000468731 Jy ! Clean residual min=-0.003472 max=0.003015 Jy/beam ! Clean residual mean=0.000019 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.457807 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.457807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111921Jy sigma=0.000670 ! Fit after self-cal, rms=0.111942Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04837e-05 Jy ! Component: 100 - total flux cleaned = -5.55517e-05 Jy ! Component: 150 - total flux cleaned = -0.000102008 Jy ! Component: 200 - total flux cleaned = -0.000124696 Jy ! Total flux subtracted in 200 components = -0.000124696 Jy ! Clean residual min=-0.003432 max=0.002992 Jy/beam ! Clean residual mean=0.000019 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.457682 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.457682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111930Jy sigma=0.000670 ! Fit after self-cal, rms=0.111929Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111929Jy sigma=0.000670 ! Fit after self-cal, rms=0.112086Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.337 mas, bpa=-2.211 degrees ! Estimated noise=1168.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.67754e-05 Jy ! Component: 100 - total flux cleaned = -0.000108115 Jy ! Component: 150 - total flux cleaned = -0.000160333 Jy ! Component: 200 - total flux cleaned = -0.000161084 Jy ! Total flux subtracted in 200 components = -0.000161084 Jy ! Clean residual min=-0.003308 max=0.002892 Jy/beam ! Clean residual mean=-0.000004 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.457521 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.457521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112069Jy sigma=0.000669 ! Fit after self-cal, rms=0.112071Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.26231e-05 Jy ! Component: 100 - total flux cleaned = -2.39455e-05 Jy ! Component: 150 - total flux cleaned = -6.31833e-05 Jy ! Component: 200 - total flux cleaned = -6.20387e-05 Jy ! Total flux subtracted in 200 components = -6.20387e-05 Jy ! Clean residual min=-0.003290 max=0.002872 Jy/beam ! Clean residual mean=-0.000004 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.457459 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.457459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112061Jy sigma=0.000668 ! Fit after self-cal, rms=0.112061Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112061Jy sigma=0.000668 ! Fit after self-cal, rms=0.112096Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.756 mas, bmaj=26.79 mas, bpa=1.224 degrees ! Estimated noise=1580.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136776 Jy ! Component: 100 - total flux cleaned = -0.00013845 Jy ! Component: 150 - total flux cleaned = -0.000139966 Jy ! Component: 200 - total flux cleaned = -0.000141439 Jy ! Total flux subtracted in 200 components = -0.000141439 Jy ! Clean residual min=-0.002979 max=0.003251 Jy/beam ! Clean residual mean=-0.000012 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.457318 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 48 components and 0.457318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112093Jy sigma=0.000668 ! Fit after self-cal, rms=0.112094Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.31715e-06 Jy ! Component: 100 - total flux cleaned = -4.03492e-06 Jy ! Component: 150 - total flux cleaned = -5.7562e-06 Jy ! Component: 200 - total flux cleaned = -7.28303e-06 Jy ! Total flux subtracted in 200 components = -7.28303e-06 Jy ! Clean residual min=-0.002978 max=0.003255 Jy/beam ! Clean residual mean=-0.000012 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.457311 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 48 components and 0.457311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112092Jy sigma=0.000668 ! Fit after self-cal, rms=0.112093Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.34 mas, bpa=-2.219 degrees ! Estimated noise=1169.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.829 x 7.34 at -2.219 degrees (North through East) ! Clean map min=-0.0030692 max=0.43465 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=6.272 mas, bpa=-2.816 degrees ! Estimated noise=2010.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339936 Jy ! Component: 100 - total flux cleaned = 0.414144 Jy ! Component: 150 - total flux cleaned = 0.434558 Jy ! Component: 200 - total flux cleaned = 0.445235 Jy ! Total flux subtracted in 200 components = 0.445235 Jy ! Clean residual min=-0.004936 max=0.006434 Jy/beam ! Clean residual mean=-0.000004 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.445234 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.445234 Jy ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.34 mas, bpa=-2.219 degrees ! Estimated noise=1169.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754305 Jy ! Component: 100 - total flux cleaned = 0.010783 Jy ! Component: 150 - total flux cleaned = 0.0121201 Jy ! Component: 200 - total flux cleaned = 0.0121214 Jy ! Total flux subtracted in 200 components = 0.0121214 Jy ! Clean residual min=-0.003162 max=0.002898 Jy/beam ! Clean residual mean=-0.000005 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.457356 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.457356 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.756 mas, bmaj=26.79 mas, bpa=1.224 degrees ! Estimated noise=1580.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.02985e-05 Jy ! Component: 100 - total flux cleaned = 2.63008e-05 Jy ! Component: 150 - total flux cleaned = -1.83289e-05 Jy ! Component: 200 - total flux cleaned = -7.05755e-05 Jy ! Total flux subtracted in 200 components = -7.05755e-05 Jy ! Clean residual min=-0.002987 max=0.003187 Jy/beam ! Clean residual mean=-0.000013 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.457285 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.50212e-05 Jy ! Component: 100 - total flux cleaned = -6.71137e-05 Jy ! Component: 150 - total flux cleaned = -9.70054e-05 Jy ! Component: 200 - total flux cleaned = -0.000106468 Jy ! Total flux subtracted in 200 components = -0.000106468 Jy ! Clean residual min=-0.002978 max=0.003184 Jy/beam ! Clean residual mean=-0.000014 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.457179 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.457179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.34 mas, bpa=-2.219 degrees ! Estimated noise=1169.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321308 Jy ! Component: 100 - total flux cleaned = -0.000320602 Jy ! Component: 150 - total flux cleaned = -0.000322992 Jy ! Component: 200 - total flux cleaned = -0.000322493 Jy ! Total flux subtracted in 200 components = -0.000322493 Jy ! Clean residual min=-0.003194 max=0.002837 Jy/beam ! Clean residual mean=-0.000007 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.456856 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.456856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112066Jy sigma=0.000668 ! Fit after self-cal, rms=0.112058Jy sigma=0.000668 wmodel J0334-3725_S_2017_06_10_pus_map.mod ! Writing 60 model components to file: J0334-3725_S_2017_06_10_pus_map.mod wobs J0334-3725_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0334-3725_S_2017_06_10_pus_uvs.fits wwins J0334-3725_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0334-3725_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00052669 Jy ! Component: 100 - total flux cleaned = -0.000800672 Jy ! Component: 150 - total flux cleaned = -0.000883229 Jy ! Component: 200 - total flux cleaned = -0.00103593 Jy ! Component: 250 - total flux cleaned = -0.00136633 Jy ! Component: 300 - total flux cleaned = -0.00161234 Jy ! Component: 350 - total flux cleaned = -0.0017812 Jy ! Component: 400 - total flux cleaned = -0.00174861 Jy ! Component: 450 - total flux cleaned = -0.00177978 Jy ! Component: 500 - total flux cleaned = -0.00171768 Jy ! Component: 550 - total flux cleaned = -0.00171784 Jy ! Component: 600 - total flux cleaned = -0.00174683 Jy ! Component: 650 - total flux cleaned = -0.00169053 Jy ! Component: 700 - total flux cleaned = -0.00163555 Jy ! Component: 750 - total flux cleaned = -0.00166184 Jy ! Component: 800 - total flux cleaned = -0.00163521 Jy ! Component: 850 - total flux cleaned = -0.00163563 Jy ! Component: 900 - total flux cleaned = -0.00166073 Jy ! Component: 950 - total flux cleaned = -0.00158644 Jy ! Component: 1000 - total flux cleaned = -0.00165998 Jy ! Component: 1050 - total flux cleaned = -0.0016602 Jy ! Component: 1100 - total flux cleaned = -0.00170773 Jy ! Component: 1150 - total flux cleaned = -0.00177711 Jy ! Component: 1200 - total flux cleaned = -0.00177699 Jy ! Component: 1250 - total flux cleaned = -0.00182165 Jy ! Component: 1300 - total flux cleaned = -0.00182178 Jy ! Component: 1350 - total flux cleaned = -0.00190866 Jy ! Component: 1400 - total flux cleaned = -0.00195142 Jy ! Component: 1450 - total flux cleaned = -0.00203558 Jy ! Component: 1500 - total flux cleaned = -0.00211856 Jy ! Component: 1550 - total flux cleaned = -0.00215972 Jy ! Component: 1600 - total flux cleaned = -0.00228153 Jy ! Component: 1650 - total flux cleaned = -0.00242171 Jy ! Component: 1700 - total flux cleaned = -0.00252044 Jy ! Component: 1750 - total flux cleaned = -0.00261805 Jy ! Component: 1800 - total flux cleaned = -0.00267614 Jy ! Component: 1850 - total flux cleaned = -0.00275285 Jy ! Component: 1900 - total flux cleaned = -0.00282862 Jy ! Component: 1950 - total flux cleaned = -0.00288462 Jy ! Component: 2000 - total flux cleaned = -0.00297696 Jy ! Component: 2050 - total flux cleaned = -0.00303169 Jy ! Component: 2100 - total flux cleaned = -0.00304963 Jy ! Component: 2150 - total flux cleaned = -0.00313918 Jy ! Component: 2200 - total flux cleaned = -0.00319238 Jy ! Component: 2250 - total flux cleaned = -0.00322749 Jy ! Component: 2300 - total flux cleaned = -0.00326232 Jy ! Component: 2350 - total flux cleaned = -0.00331419 Jy ! Component: 2400 - total flux cleaned = -0.0033143 Jy ! Component: 2450 - total flux cleaned = -0.00338206 Jy ! Component: 2500 - total flux cleaned = -0.00339882 Jy ! Component: 2550 - total flux cleaned = -0.00339876 Jy ! Component: 2600 - total flux cleaned = -0.00343155 Jy ! Component: 2650 - total flux cleaned = -0.00346422 Jy ! Component: 2700 - total flux cleaned = -0.0034479 Jy ! Component: 2750 - total flux cleaned = -0.00352828 Jy ! Component: 2800 - total flux cleaned = -0.00354414 Jy ! Component: 2850 - total flux cleaned = -0.00360737 Jy ! Component: 2900 - total flux cleaned = -0.00360729 Jy ! Component: 2950 - total flux cleaned = -0.00368514 Jy ! Component: 3000 - total flux cleaned = -0.00373149 Jy ! Component: 3050 - total flux cleaned = -0.00374678 Jy ! Component: 3100 - total flux cleaned = -0.00380747 Jy ! Component: 3150 - total flux cleaned = -0.00385272 Jy ! Component: 3200 - total flux cleaned = -0.00388247 Jy ! Component: 3250 - total flux cleaned = -0.00392698 Jy ! Component: 3300 - total flux cleaned = -0.00395651 Jy ! Component: 3350 - total flux cleaned = -0.00398579 Jy ! Component: 3400 - total flux cleaned = -0.00404389 Jy ! Component: 3450 - total flux cleaned = -0.00410178 Jy ! Component: 3500 - total flux cleaned = -0.00413046 Jy ! Component: 3550 - total flux cleaned = -0.00417322 Jy ! Component: 3600 - total flux cleaned = -0.00421572 Jy ! Component: 3650 - total flux cleaned = -0.00428613 Jy ! Component: 3700 - total flux cleaned = -0.00424394 Jy ! Component: 3750 - total flux cleaned = -0.00434157 Jy ! Component: 3800 - total flux cleaned = -0.0043693 Jy ! Component: 3850 - total flux cleaned = -0.00446574 Jy ! Component: 3900 - total flux cleaned = -0.00446571 Jy ! Component: 3950 - total flux cleaned = -0.00456126 Jy ! Component: 4000 - total flux cleaned = -0.0046019 Jy ! Component: 4050 - total flux cleaned = -0.00462889 Jy ! Total flux subtracted in 4096 components = -0.00473625 Jy ! Clean residual min=-0.000736 max=0.000804 Jy/beam ! Clean residual mean=0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.45212 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 300 components and 0.45212 Jy ![Exited script file: muppet] wmap "J0334-3725_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.829 x 7.34 at -2.219 degrees (North through East) ! Clean map min=-0.0017247 max=0.43424 Jy/beam ! Writing clean map to FITS file: J0334-3725_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.434244 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228448 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.157825 0.157825 0.31565 0.6313 1.2626 2.5252 5.0504 10.1008 20.2016 40.4032 80.8064 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.434 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.829 x 7.34 at -2.219 degrees (North through East) ! Clean map min=-0.0017247 max=0.43424 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334-3725_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:44:16 2019