! Started logfile: J0334+0226_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:17 2019 obs J0334+0226_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0334+0226_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.590986 visibilities/baseline/integration-bin. ! Found source: J0334+0226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 25020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0334+0226_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 688 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 835 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 718 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1678 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989144Jy sigma=0.008899 ! Fit after self-cal, rms=0.953174Jy sigma=0.008608 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=13.13 mas, bpa=-18.93 degrees ! Estimated noise=848.891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0384364 Jy ! Component: 100 - total flux cleaned = 0.0468797 Jy ! Total flux subtracted in 100 components = 0.0468797 Jy ! Clean residual min=-0.003147 max=0.004315 Jy/beam ! Clean residual mean=-0.000014 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0468797 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0468797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075118Jy sigma=0.000632 ! Fit after self-cal, rms=0.074199Jy sigma=0.000624 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.361 mas, bmaj=14.85 mas, bpa=-17.14 degrees ! Estimated noise=597.347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312226 Jy ! Component: 100 - total flux cleaned = 0.00459038 Jy ! Component: 150 - total flux cleaned = 0.00502886 Jy ! Component: 200 - total flux cleaned = 0.00530191 Jy ! Total flux subtracted in 200 components = 0.00530191 Jy ! Clean residual min=-0.002188 max=0.002160 Jy/beam ! Clean residual mean=-0.000038 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0521816 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.0521816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074022Jy sigma=0.000623 ! Fit after self-cal, rms=0.074008Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.01 KP 1.02 ! LA 1.05 MK 1.09 NL 0.94 OV 1.08 ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.04 KP 0.99 ! LA 0.95 MK 0.97 NL 1.07 OV 1.14 ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.02 KP 0.98 ! LA 0.97 MK 1.05 NL 0.98 OV 1.01 ! PT 1.04 ! ! ! Correcting IF 4. ! A total of 225 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.72 KP 1.00* ! LA 0.81 MK 1.07 NL 1.00* OV 0.68 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.074008Jy sigma=0.000623 ! Fit after self-cal, rms=0.072128Jy sigma=0.000620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.34 mas, bmaj=14.81 mas, bpa=-17.03 degrees ! Estimated noise=600.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439783 Jy ! Component: 100 - total flux cleaned = 0.000435546 Jy ! Component: 150 - total flux cleaned = 0.000474519 Jy ! Component: 200 - total flux cleaned = 0.000508744 Jy ! Total flux subtracted in 200 components = 0.000508744 Jy ! Clean residual min=-0.001721 max=0.001944 Jy/beam ! Clean residual mean=-0.000028 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0526904 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.0526904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072111Jy sigma=0.000620 ! Fit after self-cal, rms=0.072025Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072025Jy sigma=0.000620 ! Fit after self-cal, rms=0.070996Jy sigma=0.000619 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=14.74 mas, bpa=-16.96 degrees ! Estimated noise=598.701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124592 Jy ! Component: 100 - total flux cleaned = 6.37448e-05 Jy ! Component: 150 - total flux cleaned = 6.36728e-05 Jy ! Component: 200 - total flux cleaned = 6.37162e-05 Jy ! Total flux subtracted in 200 components = 6.37162e-05 Jy ! Clean residual min=-0.001694 max=0.001859 Jy/beam ! Clean residual mean=-0.000014 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0527541 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0527541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070985Jy sigma=0.000619 ! Fit after self-cal, rms=0.070969Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136905 Jy ! Component: 100 - total flux cleaned = 0.00167776 Jy ! Component: 150 - total flux cleaned = 0.00190002 Jy ! Component: 200 - total flux cleaned = 0.00195387 Jy ! Total flux subtracted in 200 components = 0.00195387 Jy ! Clean residual min=-0.001402 max=0.001227 Jy/beam ! Clean residual mean=-0.000014 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0547079 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 81 components and 0.054708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070919Jy sigma=0.000618 ! Fit after self-cal, rms=0.070897Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070897Jy sigma=0.000618 ! Fit after self-cal, rms=0.070579Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.334 mas, bmaj=14.75 mas, bpa=-16.94 degrees ! Estimated noise=595.701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000902703 Jy ! Component: 100 - total flux cleaned = 0.00115122 Jy ! Component: 150 - total flux cleaned = 0.00128643 Jy ! Component: 200 - total flux cleaned = 0.0012888 Jy ! Total flux subtracted in 200 components = 0.0012888 Jy ! Clean residual min=-0.001342 max=0.001171 Jy/beam ! Clean residual mean=-0.000009 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0559968 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.0559968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070549Jy sigma=0.000617 ! Fit after self-cal, rms=0.070532Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630191 Jy ! Component: 100 - total flux cleaned = 0.000631315 Jy ! Component: 150 - total flux cleaned = 0.000653036 Jy ! Component: 200 - total flux cleaned = 0.00065314 Jy ! Total flux subtracted in 200 components = 0.00065314 Jy ! Clean residual min=-0.001358 max=0.001189 Jy/beam ! Clean residual mean=-0.000009 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0566499 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.0566499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070511Jy sigma=0.000617 ! Fit after self-cal, rms=0.070498Jy sigma=0.000617 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070498Jy sigma=0.000617 ! Fit after self-cal, rms=0.070347Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.056 mas, bmaj=16.27 mas, bpa=-10.29 degrees ! Estimated noise=676.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509245 Jy ! Component: 100 - total flux cleaned = 0.00058624 Jy ! Component: 150 - total flux cleaned = 0.000697695 Jy ! Component: 200 - total flux cleaned = 0.000739201 Jy ! Total flux subtracted in 200 components = 0.000739201 Jy ! Clean residual min=-0.001427 max=0.001296 Jy/beam ! Clean residual mean=-0.000011 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0573891 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 0.0573891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070338Jy sigma=0.000617 ! Fit after self-cal, rms=0.070335Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285574 Jy ! Component: 100 - total flux cleaned = 0.000351826 Jy ! Component: 150 - total flux cleaned = 0.000411081 Jy ! Component: 200 - total flux cleaned = 0.000450953 Jy ! Total flux subtracted in 200 components = 0.000450953 Jy ! Clean residual min=-0.001413 max=0.001327 Jy/beam ! Clean residual mean=-0.000011 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.05784 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 133 components and 0.05784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070329Jy sigma=0.000617 ! Fit after self-cal, rms=0.070323Jy sigma=0.000617 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=14.76 mas, bpa=-16.94 degrees ! Estimated noise=594.129 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 14.76 at -16.94 degrees (North through East) ! Clean map min=-0.0023155 max=0.049367 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.408 mas, bmaj=13.2 mas, bpa=-18.57 degrees ! Estimated noise=814.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377866 Jy ! Component: 100 - total flux cleaned = 0.0466349 Jy ! Component: 150 - total flux cleaned = 0.0502833 Jy ! Component: 200 - total flux cleaned = 0.0515942 Jy ! Total flux subtracted in 200 components = 0.0515942 Jy ! Clean residual min=-0.002825 max=0.002883 Jy/beam ! Clean residual mean=-0.000006 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0515942 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0515942 Jy ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=14.76 mas, bpa=-16.94 degrees ! Estimated noise=594.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215507 Jy ! Component: 100 - total flux cleaned = 0.00286191 Jy ! Component: 150 - total flux cleaned = 0.00343469 Jy ! Component: 200 - total flux cleaned = 0.00397383 Jy ! Total flux subtracted in 200 components = 0.00397383 Jy ! Clean residual min=-0.001613 max=0.001557 Jy/beam ! Clean residual mean=-0.000012 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0555681 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.0555681 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.056 mas, bmaj=16.27 mas, bpa=-10.29 degrees ! Estimated noise=676.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000849128 Jy ! Component: 100 - total flux cleaned = 0.00116748 Jy ! Component: 150 - total flux cleaned = 0.00143921 Jy ! Component: 200 - total flux cleaned = 0.00167311 Jy ! Total flux subtracted in 200 components = 0.00167311 Jy ! Clean residual min=-0.001535 max=0.001328 Jy/beam ! Clean residual mean=-0.000013 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0572412 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202722 Jy ! Component: 100 - total flux cleaned = 0.000341909 Jy ! Component: 150 - total flux cleaned = 0.000467251 Jy ! Component: 200 - total flux cleaned = 0.000549827 Jy ! Total flux subtracted in 200 components = 0.000549827 Jy ! Clean residual min=-0.001473 max=0.001323 Jy/beam ! Clean residual mean=-0.000011 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.057791 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 95 components and 0.057791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=14.76 mas, bpa=-16.94 degrees ! Estimated noise=594.129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.93163e-05 Jy ! Component: 100 - total flux cleaned = -0.000165771 Jy ! Component: 150 - total flux cleaned = -0.000245615 Jy ! Component: 200 - total flux cleaned = -0.000220485 Jy ! Total flux subtracted in 200 components = -0.000220485 Jy ! Clean residual min=-0.001346 max=0.001218 Jy/beam ! Clean residual mean=-0.000007 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0575705 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 0.0575705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070328Jy sigma=0.000617 ! Fit after self-cal, rms=0.070320Jy sigma=0.000617 wmodel J0334+0226_S_2017_09_26_pus_map.mod ! Writing 122 model components to file: J0334+0226_S_2017_09_26_pus_map.mod wobs J0334+0226_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0334+0226_S_2017_09_26_pus_uvs.fits wwins J0334+0226_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0334+0226_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324912 Jy ! Component: 100 - total flux cleaned = -0.000697845 Jy ! Component: 150 - total flux cleaned = -0.000985367 Jy ! Component: 200 - total flux cleaned = -0.00121843 Jy ! Component: 250 - total flux cleaned = -0.00137134 Jy ! Component: 300 - total flux cleaned = -0.0014846 Jy ! Component: 350 - total flux cleaned = -0.00157779 Jy ! Component: 400 - total flux cleaned = -0.00169781 Jy ! Component: 450 - total flux cleaned = -0.00179945 Jy ! Component: 500 - total flux cleaned = -0.00189782 Jy ! Component: 550 - total flux cleaned = -0.00196569 Jy ! Component: 600 - total flux cleaned = -0.00196575 Jy ! Component: 650 - total flux cleaned = -0.00200445 Jy ! Component: 700 - total flux cleaned = -0.00202954 Jy ! Component: 750 - total flux cleaned = -0.00205411 Jy ! Component: 800 - total flux cleaned = -0.00207803 Jy ! Component: 850 - total flux cleaned = -0.00210152 Jy ! Component: 900 - total flux cleaned = -0.00212454 Jy ! Component: 950 - total flux cleaned = -0.00215828 Jy ! Component: 1000 - total flux cleaned = -0.0021804 Jy ! Component: 1050 - total flux cleaned = -0.00221308 Jy ! Component: 1100 - total flux cleaned = -0.002256 Jy ! Component: 1150 - total flux cleaned = -0.00229833 Jy ! Component: 1200 - total flux cleaned = -0.00235022 Jy ! Component: 1250 - total flux cleaned = -0.00241153 Jy ! Component: 1300 - total flux cleaned = -0.00242151 Jy ! Component: 1350 - total flux cleaned = -0.00247129 Jy ! Component: 1400 - total flux cleaned = -0.0025204 Jy ! Component: 1450 - total flux cleaned = -0.00254935 Jy ! Component: 1500 - total flux cleaned = -0.00258767 Jy ! Component: 1550 - total flux cleaned = -0.0026445 Jy ! Component: 1600 - total flux cleaned = -0.00267267 Jy ! Component: 1650 - total flux cleaned = -0.00273767 Jy ! Component: 1700 - total flux cleaned = -0.00282923 Jy ! Component: 1750 - total flux cleaned = -0.00284732 Jy ! Component: 1800 - total flux cleaned = -0.00289203 Jy ! Component: 1850 - total flux cleaned = -0.00294518 Jy ! Component: 1900 - total flux cleaned = -0.00300658 Jy ! Component: 1950 - total flux cleaned = -0.00306734 Jy ! Component: 2000 - total flux cleaned = -0.00312759 Jy ! Component: 2050 - total flux cleaned = -0.00317009 Jy ! Component: 2100 - total flux cleaned = -0.00323745 Jy ! Component: 2150 - total flux cleaned = -0.00331246 Jy ! Component: 2200 - total flux cleaned = -0.0033784 Jy ! Component: 2250 - total flux cleaned = -0.00343563 Jy ! Component: 2300 - total flux cleaned = -0.00347619 Jy ! Component: 2350 - total flux cleaned = -0.00354856 Jy ! Component: 2400 - total flux cleaned = -0.00359631 Jy ! Component: 2450 - total flux cleaned = -0.00364368 Jy ! Component: 2500 - total flux cleaned = -0.00369842 Jy ! Component: 2550 - total flux cleaned = -0.0037604 Jy ! Component: 2600 - total flux cleaned = -0.00379111 Jy ! Component: 2650 - total flux cleaned = -0.00384453 Jy ! Component: 2700 - total flux cleaned = -0.00388983 Jy ! Component: 2750 - total flux cleaned = -0.00394227 Jy ! Component: 2800 - total flux cleaned = -0.00398685 Jy ! Component: 2850 - total flux cleaned = -0.00403113 Jy ! Component: 2900 - total flux cleaned = -0.00408964 Jy ! Component: 2950 - total flux cleaned = -0.0041477 Jy ! Component: 3000 - total flux cleaned = -0.00418371 Jy ! Component: 3050 - total flux cleaned = -0.00422667 Jy ! Component: 3100 - total flux cleaned = -0.00425511 Jy ! Component: 3150 - total flux cleaned = -0.00426925 Jy ! Component: 3200 - total flux cleaned = -0.00429734 Jy ! Component: 3250 - total flux cleaned = -0.00431818 Jy ! Component: 3300 - total flux cleaned = -0.0043251 Jy ! Component: 3350 - total flux cleaned = -0.00433888 Jy ! Component: 3400 - total flux cleaned = -0.00436632 Jy ! Component: 3450 - total flux cleaned = -0.00438678 Jy ! Component: 3500 - total flux cleaned = -0.00440035 Jy ! Component: 3550 - total flux cleaned = -0.0044004 Jy ! Component: 3600 - total flux cleaned = -0.00440716 Jy ! Component: 3650 - total flux cleaned = -0.00442717 Jy ! Component: 3700 - total flux cleaned = -0.00442049 Jy ! Component: 3750 - total flux cleaned = -0.00442709 Jy ! Component: 3800 - total flux cleaned = -0.00441392 Jy ! Component: 3850 - total flux cleaned = -0.0044074 Jy ! Component: 3900 - total flux cleaned = -0.00440742 Jy ! Component: 3950 - total flux cleaned = -0.00442038 Jy ! Component: 4000 - total flux cleaned = -0.00438148 Jy ! Component: 4050 - total flux cleaned = -0.00437502 Jy ! Total flux subtracted in 4096 components = -0.00438145 Jy ! Clean residual min=-0.000331 max=0.000350 Jy/beam ! Clean residual mean=-0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.053189 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 389 components and 0.053189 Jy ![Exited script file: muppet] wmap "J0334+0226_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 14.76 at -16.94 degrees (North through East) ! Clean map min=-0.00187 max=0.048865 Jy/beam ! Writing clean map to FITS file: J0334+0226_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0488655 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00011776 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.722966 0.722966 1.44593 2.89187 5.78373 11.5675 23.1349 46.2698 92.5397 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 14.76 at -16.94 degrees (North through East) ! Clean map min=-0.00187 max=0.048865 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0334+0226_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:22 2019