! Started logfile: J0330-4014_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:45 2019 obs J0330-4014_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0330-4014_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.33659 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0330-4014 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0330-4014_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 523 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 590 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 523 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1104 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.828310Jy sigma=0.004800 ! Fit after self-cal, rms=0.719158Jy sigma=0.004144 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=28.1 mas, bpa=-17.68 degrees ! Estimated noise=2080.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217149 Jy ! Component: 100 - total flux cleaned = 0.31091 Jy ! Total flux subtracted in 100 components = 0.31091 Jy ! Clean residual min=-0.033475 max=0.048966 Jy/beam ! Clean residual mean=-0.001244 rms=0.011819 Jy/beam ! Combined flux in latest and established models = 0.31091 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.31091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205601Jy sigma=0.001086 ! Fit after self-cal, rms=0.204524Jy sigma=0.001083 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=28.82 mas, bpa=-16.83 degrees ! Estimated noise=1774.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961517 Jy ! Component: 100 - total flux cleaned = 0.157169 Jy ! Component: 150 - total flux cleaned = 0.197948 Jy ! Component: 200 - total flux cleaned = 0.225897 Jy ! Total flux subtracted in 200 components = 0.225897 Jy ! Clean residual min=-0.019216 max=0.017839 Jy/beam ! Clean residual mean=-0.000509 rms=0.005777 Jy/beam ! Combined flux in latest and established models = 0.536806 Jy ! Performing phase self-cal ! Adding 107 model components to the UV plane model. ! The established model now contains 154 components and 0.536807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145306Jy sigma=0.000718 ! Fit after self-cal, rms=0.144731Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.50 KP 1.08 ! LA 1.01 MK 1.02 NL 0.96 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.38 KP 1.03 ! LA 0.98 MK 1.01 NL 1.00 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.22 KP 0.91 ! LA 0.76 MK 1.07 NL 1.24 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.144731Jy sigma=0.000714 ! Fit after self-cal, rms=0.135926Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=30.49 mas, bpa=-17.04 degrees ! Estimated noise=1855.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587031 Jy ! Component: 100 - total flux cleaned = -0.000788563 Jy ! Component: 150 - total flux cleaned = -0.000950215 Jy ! Component: 200 - total flux cleaned = -0.000806031 Jy ! Total flux subtracted in 200 components = -0.000806031 Jy ! Clean residual min=-0.010920 max=0.009914 Jy/beam ! Clean residual mean=0.000041 rms=0.003291 Jy/beam ! Combined flux in latest and established models = 0.536001 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 186 components and 0.536001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135177Jy sigma=0.000650 ! Fit after self-cal, rms=0.135362Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135362Jy sigma=0.000649 ! Fit after self-cal, rms=0.137441Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=31.05 mas, bpa=-17.21 degrees ! Estimated noise=1876.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146244 Jy ! Component: 100 - total flux cleaned = -0.00164324 Jy ! Component: 150 - total flux cleaned = -0.00164795 Jy ! Component: 200 - total flux cleaned = -0.00191461 Jy ! Total flux subtracted in 200 components = -0.00191461 Jy ! Clean residual min=-0.010091 max=0.008969 Jy/beam ! Clean residual mean=0.000039 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 0.534086 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 207 components and 0.534086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136937Jy sigma=0.000647 ! Fit after self-cal, rms=0.137013Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18706e-05 Jy ! Component: 100 - total flux cleaned = -9.43931e-05 Jy ! Component: 150 - total flux cleaned = -0.000312283 Jy ! Component: 200 - total flux cleaned = -0.000411318 Jy ! Total flux subtracted in 200 components = -0.000411318 Jy ! Clean residual min=-0.009745 max=0.008352 Jy/beam ! Clean residual mean=0.000034 rms=0.002968 Jy/beam ! Combined flux in latest and established models = 0.533674 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 225 components and 0.533674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136761Jy sigma=0.000646 ! Fit after self-cal, rms=0.136766Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136766Jy sigma=0.000646 ! Fit after self-cal, rms=0.139425Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=31.7 mas, bpa=-17.39 degrees ! Estimated noise=1897.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118144 Jy ! Component: 100 - total flux cleaned = -0.00134113 Jy ! Component: 150 - total flux cleaned = -0.001465 Jy ! Component: 200 - total flux cleaned = -0.0014646 Jy ! Total flux subtracted in 200 components = -0.0014646 Jy ! Clean residual min=-0.008982 max=0.007478 Jy/beam ! Clean residual mean=-0.000032 rms=0.002518 Jy/beam ! Combined flux in latest and established models = 0.53221 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 250 components and 0.53221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139124Jy sigma=0.000642 ! Fit after self-cal, rms=0.139158Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.63342e-05 Jy ! Component: 100 - total flux cleaned = 5.23207e-05 Jy ! Component: 150 - total flux cleaned = 5.21497e-05 Jy ! Component: 200 - total flux cleaned = -2.48341e-05 Jy ! Total flux subtracted in 200 components = -2.48341e-05 Jy ! Clean residual min=-0.008963 max=0.006995 Jy/beam ! Clean residual mean=-0.000033 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 0.532185 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 264 components and 0.532185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139010Jy sigma=0.000642 ! Fit after self-cal, rms=0.139003Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139003Jy sigma=0.000642 ! Fit after self-cal, rms=0.142120Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.05 mas, bmaj=54.87 mas, bpa=-8.87 degrees ! Estimated noise=2222.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818647 Jy ! Component: 100 - total flux cleaned = -0.00118056 Jy ! Component: 150 - total flux cleaned = -0.00118579 Jy ! Component: 200 - total flux cleaned = -0.00110274 Jy ! Total flux subtracted in 200 components = -0.00110274 Jy ! Clean residual min=-0.007632 max=0.007099 Jy/beam ! Clean residual mean=-0.000049 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 0.531082 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 287 components and 0.531083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141988Jy sigma=0.000641 ! Fit after self-cal, rms=0.141999Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159533 Jy ! Component: 100 - total flux cleaned = 7.38676e-05 Jy ! Component: 150 - total flux cleaned = 5.40141e-06 Jy ! Component: 200 - total flux cleaned = 6.60199e-05 Jy ! Total flux subtracted in 200 components = 6.60199e-05 Jy ! Clean residual min=-0.007378 max=0.006918 Jy/beam ! Clean residual mean=-0.000051 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 0.531149 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 300 components and 0.531149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141952Jy sigma=0.000640 ! Fit after self-cal, rms=0.141936Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=32.24 mas, bpa=-17.53 degrees ! Estimated noise=1913.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 32.24 at -17.53 degrees (North through East) ! Clean map min=-0.0078407 max=0.26455 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=31.15 mas, bpa=-18.33 degrees ! Estimated noise=2258.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225834 Jy ! Component: 100 - total flux cleaned = 0.314944 Jy ! Component: 150 - total flux cleaned = 0.374058 Jy ! Component: 200 - total flux cleaned = 0.415863 Jy ! Total flux subtracted in 200 components = 0.415863 Jy ! Clean residual min=-0.017450 max=0.023887 Jy/beam ! Clean residual mean=-0.000611 rms=0.005949 Jy/beam ! Combined flux in latest and established models = 0.415863 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.415863 Jy ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=32.24 mas, bpa=-17.53 degrees ! Estimated noise=1913.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432425 Jy ! Component: 100 - total flux cleaned = 0.0693161 Jy ! Component: 150 - total flux cleaned = 0.0859077 Jy ! Component: 200 - total flux cleaned = 0.0969022 Jy ! Total flux subtracted in 200 components = 0.0969022 Jy ! Clean residual min=-0.009177 max=0.009833 Jy/beam ! Clean residual mean=-0.000206 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 0.512765 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 139 components and 0.512765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.05 mas, bmaj=54.87 mas, bpa=-8.87 degrees ! Estimated noise=2222.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106318 Jy ! Component: 100 - total flux cleaned = 0.0161798 Jy ! Component: 150 - total flux cleaned = 0.019199 Jy ! Component: 200 - total flux cleaned = 0.0208057 Jy ! Total flux subtracted in 200 components = 0.0208057 Jy ! Clean residual min=-0.007600 max=0.007612 Jy/beam ! Clean residual mean=-0.000013 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.533571 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102296 Jy ! Component: 100 - total flux cleaned = 0.000199657 Jy ! Component: 150 - total flux cleaned = 0.000295135 Jy ! Component: 200 - total flux cleaned = 0.000341342 Jy ! Total flux subtracted in 200 components = 0.000341342 Jy ! Clean residual min=-0.007603 max=0.007464 Jy/beam ! Clean residual mean=-0.000007 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.533912 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 170 components and 0.533912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=32.24 mas, bpa=-17.53 degrees ! Estimated noise=1913.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000305235 Jy ! Component: 100 - total flux cleaned = -0.000393679 Jy ! Component: 150 - total flux cleaned = -0.000392749 Jy ! Component: 200 - total flux cleaned = -0.000474184 Jy ! Total flux subtracted in 200 components = -0.000474184 Jy ! Clean residual min=-0.008559 max=0.006702 Jy/beam ! Clean residual mean=-0.000009 rms=0.002231 Jy/beam ! Combined flux in latest and established models = 0.533438 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 192 components and 0.533438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141930Jy sigma=0.000641 ! Fit after self-cal, rms=0.141890Jy sigma=0.000640 wmodel J0330-4014_S_2017_10_09_pus_map.mod ! Writing 192 model components to file: J0330-4014_S_2017_10_09_pus_map.mod wobs J0330-4014_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0330-4014_S_2017_10_09_pus_uvs.fits wwins J0330-4014_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0330-4014_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141513 Jy ! Component: 100 - total flux cleaned = -0.00223005 Jy ! Component: 150 - total flux cleaned = -0.00265243 Jy ! Component: 200 - total flux cleaned = -0.00324101 Jy ! Component: 250 - total flux cleaned = -0.00443936 Jy ! Component: 300 - total flux cleaned = -0.00504826 Jy ! Component: 350 - total flux cleaned = -0.0057092 Jy ! Component: 400 - total flux cleaned = -0.00594565 Jy ! Component: 450 - total flux cleaned = -0.00639358 Jy ! Component: 500 - total flux cleaned = -0.00660972 Jy ! Component: 550 - total flux cleaned = -0.00708794 Jy ! Component: 600 - total flux cleaned = -0.0072183 Jy ! Component: 650 - total flux cleaned = -0.00747001 Jy ! Component: 700 - total flux cleaned = -0.00753459 Jy ! Component: 750 - total flux cleaned = -0.00771274 Jy ! Component: 800 - total flux cleaned = -0.00788122 Jy ! Component: 850 - total flux cleaned = -0.00777216 Jy ! Component: 900 - total flux cleaned = -0.00777263 Jy ! Component: 950 - total flux cleaned = -0.00772323 Jy ! Component: 1000 - total flux cleaned = -0.0075261 Jy ! Component: 1050 - total flux cleaned = -0.00733508 Jy ! Component: 1100 - total flux cleaned = -0.00719565 Jy ! Component: 1150 - total flux cleaned = -0.00710492 Jy ! Component: 1200 - total flux cleaned = -0.00697247 Jy ! Component: 1250 - total flux cleaned = -0.00684461 Jy ! Component: 1300 - total flux cleaned = -0.00676148 Jy ! Component: 1350 - total flux cleaned = -0.00660001 Jy ! Component: 1400 - total flux cleaned = -0.00659935 Jy ! Component: 1450 - total flux cleaned = -0.0062903 Jy ! Component: 1500 - total flux cleaned = -0.00621531 Jy ! Component: 1550 - total flux cleaned = -0.00610342 Jy ! Component: 1600 - total flux cleaned = -0.00603009 Jy ! Component: 1650 - total flux cleaned = -0.00599384 Jy ! Component: 1700 - total flux cleaned = -0.0059936 Jy ! Component: 1750 - total flux cleaned = -0.00609763 Jy ! Component: 1800 - total flux cleaned = -0.00609734 Jy ! Component: 1850 - total flux cleaned = -0.00626708 Jy ! Component: 1900 - total flux cleaned = -0.00643494 Jy ! Component: 1950 - total flux cleaned = -0.00656785 Jy ! Component: 2000 - total flux cleaned = -0.00670005 Jy ! Component: 2050 - total flux cleaned = -0.00686375 Jy ! Component: 2100 - total flux cleaned = -0.00696101 Jy ! Component: 2150 - total flux cleaned = -0.00712207 Jy ! Component: 2200 - total flux cleaned = -0.00712199 Jy ! Component: 2250 - total flux cleaned = -0.00715375 Jy ! Component: 2300 - total flux cleaned = -0.00718529 Jy ! Component: 2350 - total flux cleaned = -0.00724795 Jy ! Component: 2400 - total flux cleaned = -0.00734164 Jy ! Component: 2450 - total flux cleaned = -0.0074038 Jy ! Component: 2500 - total flux cleaned = -0.00743481 Jy ! Component: 2550 - total flux cleaned = -0.00755828 Jy ! Component: 2600 - total flux cleaned = -0.00768156 Jy ! Component: 2650 - total flux cleaned = -0.00780471 Jy ! Component: 2700 - total flux cleaned = -0.00795822 Jy ! Component: 2750 - total flux cleaned = -0.00811141 Jy ! Component: 2800 - total flux cleaned = -0.00826451 Jy ! Component: 2850 - total flux cleaned = -0.00847865 Jy ! Component: 2900 - total flux cleaned = -0.0086622 Jy ! Component: 2950 - total flux cleaned = -0.00881495 Jy ! Component: 3000 - total flux cleaned = -0.00905978 Jy ! Component: 3050 - total flux cleaned = -0.00933511 Jy ! Component: 3100 - total flux cleaned = -0.00951865 Jy ! Component: 3150 - total flux cleaned = -0.0097633 Jy ! Component: 3200 - total flux cleaned = -0.0100082 Jy ! Component: 3250 - total flux cleaned = -0.0102228 Jy ! Component: 3300 - total flux cleaned = -0.0104678 Jy ! Component: 3350 - total flux cleaned = -0.0106211 Jy ! Component: 3400 - total flux cleaned = -0.0108362 Jy ! Component: 3450 - total flux cleaned = -0.0110209 Jy ! Component: 3500 - total flux cleaned = -0.0111134 Jy ! Component: 3550 - total flux cleaned = -0.0113296 Jy ! Component: 3600 - total flux cleaned = -0.0114534 Jy ! Component: 3650 - total flux cleaned = -0.0115466 Jy ! Component: 3700 - total flux cleaned = -0.0116716 Jy ! Component: 3750 - total flux cleaned = -0.0118597 Jy ! Component: 3800 - total flux cleaned = -0.0118913 Jy ! Component: 3850 - total flux cleaned = -0.0120496 Jy ! Component: 3900 - total flux cleaned = -0.0122087 Jy ! Component: 3950 - total flux cleaned = -0.0123043 Jy ! Component: 4000 - total flux cleaned = -0.012465 Jy ! Component: 4050 - total flux cleaned = -0.0124973 Jy ! Total flux subtracted in 4096 components = -0.0127248 Jy ! Clean residual min=-0.001815 max=0.001839 Jy/beam ! Clean residual mean=-0.000012 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.520713 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 507 components and 0.520713 Jy ![Exited script file: muppet] wmap "J0330-4014_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 32.24 at -17.53 degrees (North through East) ! Clean map min=-0.0057578 max=0.2736 Jy/beam ! Writing clean map to FITS file: J0330-4014_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.273599 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000729554 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.799951 0.799951 1.5999 3.19981 6.39961 12.7992 25.5984 51.1969 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.273 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 32.24 at -17.53 degrees (North through East) ! Clean map min=-0.0057578 max=0.2736 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0330-4014_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:51 2019