! Started logfile: J0330-4014_S_2017_02_19_pus_uvs.log on Sat May 4 18:40:49 2019 obs J0330-4014_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0330-4014_S_2017_02_19_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.318713 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0330-4014 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 6540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0330-4014_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 524 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 503 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 500 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 773 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.691390Jy sigma=0.004181 ! Fit after self-cal, rms=0.671435Jy sigma=0.004070 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=8.126 mas, bpa=-7.919 degrees ! Estimated noise=2839.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219268 Jy ! Component: 100 - total flux cleaned = 0.299083 Jy ! Total flux subtracted in 100 components = 0.299083 Jy ! Clean residual min=-0.027439 max=0.043718 Jy/beam ! Clean residual mean=-0.000046 rms=0.009662 Jy/beam ! Combined flux in latest and established models = 0.299083 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.299083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196798Jy sigma=0.001069 ! Fit after self-cal, rms=0.196245Jy sigma=0.001067 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=9.244 mas, bpa=-6.671 degrees ! Estimated noise=1711.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0902374 Jy ! Component: 100 - total flux cleaned = 0.136133 Jy ! Component: 150 - total flux cleaned = 0.160751 Jy ! Component: 200 - total flux cleaned = 0.174289 Jy ! Total flux subtracted in 200 components = 0.174289 Jy ! Clean residual min=-0.022289 max=0.037629 Jy/beam ! Clean residual mean=-0.000031 rms=0.008079 Jy/beam ! Combined flux in latest and established models = 0.473373 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 57 components and 0.473373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148010Jy sigma=0.000805 ! Fit after self-cal, rms=0.147712Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 1.03 ! LA 0.99 MK 0.90 NL 1.00* OV 1.10 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.96 ! LA 0.97 MK 0.94 NL 1.49 OV 1.13 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.84 ! LA 0.74 MK 1.19 NL 1.60 OV 1.06 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.00* ! LA 0.75 MK 0.99 NL 1.00* OV 1.31 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.147712Jy sigma=0.000804 ! Fit after self-cal, rms=0.137895Jy sigma=0.000726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=9.239 mas, bpa=-6.708 degrees ! Estimated noise=1722.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256004 Jy ! Component: 100 - total flux cleaned = 0.0340941 Jy ! Component: 150 - total flux cleaned = 0.0353443 Jy ! Component: 200 - total flux cleaned = 0.0360008 Jy ! Total flux subtracted in 200 components = 0.0360008 Jy ! Clean residual min=-0.009842 max=0.017234 Jy/beam ! Clean residual mean=0.000037 rms=0.003352 Jy/beam ! Combined flux in latest and established models = 0.509374 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.509374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132969Jy sigma=0.000697 ! Fit after self-cal, rms=0.132795Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132795Jy sigma=0.000693 ! Fit after self-cal, rms=0.128455Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=9.19 mas, bpa=-6.71 degrees ! Estimated noise=1692.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946701 Jy ! Component: 100 - total flux cleaned = 0.010614 Jy ! Component: 150 - total flux cleaned = 0.0111271 Jy ! Component: 200 - total flux cleaned = 0.0114057 Jy ! Total flux subtracted in 200 components = 0.0114057 Jy ! Clean residual min=-0.007497 max=0.011902 Jy/beam ! Clean residual mean=0.000028 rms=0.002652 Jy/beam ! Combined flux in latest and established models = 0.520779 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.520779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127402Jy sigma=0.000686 ! Fit after self-cal, rms=0.127157Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385408 Jy ! Component: 100 - total flux cleaned = 0.00371229 Jy ! Component: 150 - total flux cleaned = 0.00346476 Jy ! Component: 200 - total flux cleaned = 0.00301076 Jy ! Total flux subtracted in 200 components = 0.00301076 Jy ! Clean residual min=-0.007011 max=0.010121 Jy/beam ! Clean residual mean=0.000027 rms=0.002343 Jy/beam ! Combined flux in latest and established models = 0.52379 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 105 components and 0.52379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126762Jy sigma=0.000683 ! Fit after self-cal, rms=0.126690Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126690Jy sigma=0.000683 ! Fit after self-cal, rms=0.124092Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=9.197 mas, bpa=-6.529 degrees ! Estimated noise=1681.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504037 Jy ! Component: 100 - total flux cleaned = 0.00527582 Jy ! Component: 150 - total flux cleaned = 0.00510386 Jy ! Component: 200 - total flux cleaned = 0.00494496 Jy ! Total flux subtracted in 200 components = 0.00494496 Jy ! Clean residual min=-0.006966 max=0.007704 Jy/beam ! Clean residual mean=0.000027 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.528735 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 124 components and 0.528735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123755Jy sigma=0.000677 ! Fit after self-cal, rms=0.123656Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253799 Jy ! Component: 100 - total flux cleaned = 0.00221586 Jy ! Component: 150 - total flux cleaned = 0.00207013 Jy ! Component: 200 - total flux cleaned = 0.00187083 Jy ! Total flux subtracted in 200 components = 0.00187083 Jy ! Clean residual min=-0.006951 max=0.006807 Jy/beam ! Clean residual mean=0.000027 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.530606 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 0.530606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123496Jy sigma=0.000676 ! Fit after self-cal, rms=0.123467Jy sigma=0.000676 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123467Jy sigma=0.000676 ! Fit after self-cal, rms=0.122760Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.502 mas, bmaj=27.21 mas, bpa=0.2975 degrees ! Estimated noise=2397.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343866 Jy ! Component: 100 - total flux cleaned = 0.00335596 Jy ! Component: 150 - total flux cleaned = 0.00335558 Jy ! Component: 200 - total flux cleaned = 0.00342396 Jy ! Total flux subtracted in 200 components = 0.00342396 Jy ! Clean residual min=-0.010413 max=0.009135 Jy/beam ! Clean residual mean=0.000041 rms=0.003082 Jy/beam ! Combined flux in latest and established models = 0.53403 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 0.53403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122663Jy sigma=0.000676 ! Fit after self-cal, rms=0.122616Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100525 Jy ! Component: 100 - total flux cleaned = 0.000676917 Jy ! Component: 150 - total flux cleaned = 0.000508247 Jy ! Component: 200 - total flux cleaned = 0.000560435 Jy ! Total flux subtracted in 200 components = 0.000560435 Jy ! Clean residual min=-0.010495 max=0.008306 Jy/beam ! Clean residual mean=0.000040 rms=0.002973 Jy/beam ! Combined flux in latest and established models = 0.53459 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 139 components and 0.53459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122583Jy sigma=0.000676 ! Fit after self-cal, rms=0.122570Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=9.206 mas, bpa=-6.46 degrees ! Estimated noise=1682.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.737 x 9.206 at -6.46 degrees (North through East) ! Clean map min=-0.0068554 max=0.29912 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.11 mas, bmaj=8.071 mas, bpa=-7.713 degrees ! Estimated noise=2845.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21774 Jy ! Component: 100 - total flux cleaned = 0.299712 Jy ! Component: 150 - total flux cleaned = 0.350027 Jy ! Component: 200 - total flux cleaned = 0.385374 Jy ! Total flux subtracted in 200 components = 0.385374 Jy ! Clean residual min=-0.015420 max=0.021768 Jy/beam ! Clean residual mean=-0.000020 rms=0.005368 Jy/beam ! Combined flux in latest and established models = 0.385374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.385374 Jy ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=9.206 mas, bpa=-6.46 degrees ! Estimated noise=1682.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518004 Jy ! Component: 100 - total flux cleaned = 0.0804841 Jy ! Component: 150 - total flux cleaned = 0.0982684 Jy ! Component: 200 - total flux cleaned = 0.110622 Jy ! Total flux subtracted in 200 components = 0.110622 Jy ! Clean residual min=-0.008280 max=0.009217 Jy/beam ! Clean residual mean=-0.000004 rms=0.002900 Jy/beam ! Combined flux in latest and established models = 0.495995 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 117 components and 0.495995 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.502 mas, bmaj=27.21 mas, bpa=0.2975 degrees ! Estimated noise=2397.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175756 Jy ! Component: 100 - total flux cleaned = 0.0275757 Jy ! Component: 150 - total flux cleaned = 0.0333854 Jy ! Component: 200 - total flux cleaned = 0.0368608 Jy ! Total flux subtracted in 200 components = 0.0368608 Jy ! Clean residual min=-0.010596 max=0.008893 Jy/beam ! Clean residual mean=0.000039 rms=0.002983 Jy/beam ! Combined flux in latest and established models = 0.532856 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149851 Jy ! Component: 100 - total flux cleaned = 0.00195264 Jy ! Component: 150 - total flux cleaned = 0.00242223 Jy ! Component: 200 - total flux cleaned = 0.00277456 Jy ! Total flux subtracted in 200 components = 0.00277456 Jy ! Clean residual min=-0.009828 max=0.008089 Jy/beam ! Clean residual mean=0.000043 rms=0.002874 Jy/beam ! Combined flux in latest and established models = 0.535631 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 161 components and 0.535631 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=9.206 mas, bpa=-6.46 degrees ! Estimated noise=1682.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016513 Jy ! Component: 100 - total flux cleaned = -0.0016877 Jy ! Component: 150 - total flux cleaned = -0.00168091 Jy ! Component: 200 - total flux cleaned = -0.00167848 Jy ! Total flux subtracted in 200 components = -0.00167848 Jy ! Clean residual min=-0.006248 max=0.006289 Jy/beam ! Clean residual mean=0.000017 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.533952 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 184 components and 0.533952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122381Jy sigma=0.000675 ! Fit after self-cal, rms=0.122303Jy sigma=0.000674 wmodel J0330-4014_S_2017_02_19_pus_map.mod ! Writing 184 model components to file: J0330-4014_S_2017_02_19_pus_map.mod wobs J0330-4014_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0330-4014_S_2017_02_19_pus_uvs.fits wwins J0330-4014_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J0330-4014_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019482 Jy ! Component: 100 - total flux cleaned = -0.0019532 Jy ! Component: 150 - total flux cleaned = -0.00179092 Jy ! Component: 200 - total flux cleaned = -0.00186181 Jy ! Component: 250 - total flux cleaned = -0.00207015 Jy ! Component: 300 - total flux cleaned = -0.00239447 Jy ! Component: 350 - total flux cleaned = -0.00257871 Jy ! Component: 400 - total flux cleaned = -0.00280967 Jy ! Component: 450 - total flux cleaned = -0.00286368 Jy ! Component: 500 - total flux cleaned = -0.003176 Jy ! Component: 550 - total flux cleaned = -0.00347313 Jy ! Component: 600 - total flux cleaned = -0.00366313 Jy ! Component: 650 - total flux cleaned = -0.00371 Jy ! Component: 700 - total flux cleaned = -0.0036672 Jy ! Component: 750 - total flux cleaned = -0.00375298 Jy ! Component: 800 - total flux cleaned = -0.00362904 Jy ! Component: 850 - total flux cleaned = -0.00342975 Jy ! Component: 900 - total flux cleaned = -0.00316005 Jy ! Component: 950 - total flux cleaned = -0.00312345 Jy ! Component: 1000 - total flux cleaned = -0.00301345 Jy ! Component: 1050 - total flux cleaned = -0.00276411 Jy ! Component: 1100 - total flux cleaned = -0.00266036 Jy ! Component: 1150 - total flux cleaned = -0.00252454 Jy ! Component: 1200 - total flux cleaned = -0.00229189 Jy ! Component: 1250 - total flux cleaned = -0.00222704 Jy ! Component: 1300 - total flux cleaned = -0.00203664 Jy ! Component: 1350 - total flux cleaned = -0.00194341 Jy ! Component: 1400 - total flux cleaned = -0.00185219 Jy ! Component: 1450 - total flux cleaned = -0.0017928 Jy ! Component: 1500 - total flux cleaned = -0.0016474 Jy ! Component: 1550 - total flux cleaned = -0.00161873 Jy ! Component: 1600 - total flux cleaned = -0.00153483 Jy ! Component: 1650 - total flux cleaned = -0.00148032 Jy ! Component: 1700 - total flux cleaned = -0.00142596 Jy ! Component: 1750 - total flux cleaned = -0.00137287 Jy ! Component: 1800 - total flux cleaned = -0.00121662 Jy ! Component: 1850 - total flux cleaned = -0.00111477 Jy ! Component: 1900 - total flux cleaned = -0.000939051 Jy ! Component: 1950 - total flux cleaned = -0.00084072 Jy ! Component: 2000 - total flux cleaned = -0.000694976 Jy ! Component: 2050 - total flux cleaned = -0.000598774 Jy ! Component: 2100 - total flux cleaned = -0.000410732 Jy ! Component: 2150 - total flux cleaned = -0.000249267 Jy ! Component: 2200 - total flux cleaned = -6.70154e-05 Jy ! Component: 2250 - total flux cleaned = 9.02036e-05 Jy ! Component: 2300 - total flux cleaned = 0.000245367 Jy ! Component: 2350 - total flux cleaned = 0.00044189 Jy ! Component: 2400 - total flux cleaned = 0.000592432 Jy ! Component: 2450 - total flux cleaned = 0.00067753 Jy ! Component: 2500 - total flux cleaned = 0.00076192 Jy ! Component: 2550 - total flux cleaned = 0.00086579 Jy ! Component: 2600 - total flux cleaned = 0.000948048 Jy ! Component: 2650 - total flux cleaned = 0.000947982 Jy ! Component: 2700 - total flux cleaned = 0.00106917 Jy ! Component: 2750 - total flux cleaned = 0.00114918 Jy ! Component: 2800 - total flux cleaned = 0.00114921 Jy ! Component: 2850 - total flux cleaned = 0.00122831 Jy ! Component: 2900 - total flux cleaned = 0.00122841 Jy ! Component: 2950 - total flux cleaned = 0.00130669 Jy ! Component: 3000 - total flux cleaned = 0.00128714 Jy ! Component: 3050 - total flux cleaned = 0.00126773 Jy ! Component: 3100 - total flux cleaned = 0.00130638 Jy ! Component: 3150 - total flux cleaned = 0.0013257 Jy ! Component: 3200 - total flux cleaned = 0.00134482 Jy ! Component: 3250 - total flux cleaned = 0.00136396 Jy ! Component: 3300 - total flux cleaned = 0.00140221 Jy ! Component: 3350 - total flux cleaned = 0.00140217 Jy ! Component: 3400 - total flux cleaned = 0.00138299 Jy ! Component: 3450 - total flux cleaned = 0.00140203 Jy ! Component: 3500 - total flux cleaned = 0.0014401 Jy ! Component: 3550 - total flux cleaned = 0.00142103 Jy ! Component: 3600 - total flux cleaned = 0.00140196 Jy ! Component: 3650 - total flux cleaned = 0.00142104 Jy ! Component: 3700 - total flux cleaned = 0.00136378 Jy ! Component: 3750 - total flux cleaned = 0.00140187 Jy ! Component: 3800 - total flux cleaned = 0.00132547 Jy ! Component: 3850 - total flux cleaned = 0.00132558 Jy ! Component: 3900 - total flux cleaned = 0.00128724 Jy ! Component: 3950 - total flux cleaned = 0.00126804 Jy ! Component: 4000 - total flux cleaned = 0.00122947 Jy ! Component: 4050 - total flux cleaned = 0.00121011 Jy ! Total flux subtracted in 4096 components = 0.00115135 Jy ! Clean residual min=-0.001128 max=0.001186 Jy/beam ! Clean residual mean=0.000011 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.535104 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 443 components and 0.535104 Jy ![Exited script file: muppet] wmap "J0330-4014_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.737 x 9.206 at -6.46 degrees (North through East) ! Clean map min=-0.0025708 max=0.308 Jy/beam ! Writing clean map to FITS file: J0330-4014_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.307997 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000320399 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.31208 0.31208 0.62416 1.24832 2.49664 4.99328 9.98657 19.9731 39.9463 79.8925 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.307 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.737 x 9.206 at -6.46 degrees (North through East) ! Clean map min=-0.0025708 max=0.308 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0330-4014_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:40:53 2019