! Started logfile: J0330-0551_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:12 2019 obs J0330-0551_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0330-0551_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.256309 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0330-0551 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 10888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0330-0551_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1241 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1505 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1493 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2478 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985134Jy sigma=0.008912 ! Fit after self-cal, rms=0.940667Jy sigma=0.008602 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.03 mas, bmaj=14.23 mas, bpa=4.137 degrees ! Estimated noise=1808.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419563 Jy ! Component: 100 - total flux cleaned = 0.051306 Jy ! Total flux subtracted in 100 components = 0.051306 Jy ! Clean residual min=-0.005498 max=0.005860 Jy/beam ! Clean residual mean=0.000030 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 0.051306 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.051306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089345Jy sigma=0.000635 ! Fit after self-cal, rms=0.088920Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.4 mas, bmaj=22.84 mas, bpa=2.283 degrees ! Estimated noise=992.497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00899277 Jy ! Component: 100 - total flux cleaned = 0.0131416 Jy ! Component: 150 - total flux cleaned = 0.0156264 Jy ! Component: 200 - total flux cleaned = 0.0172725 Jy ! Total flux subtracted in 200 components = 0.0172725 Jy ! Clean residual min=-0.003652 max=0.004400 Jy/beam ! Clean residual mean=0.000022 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.0685785 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 81 components and 0.0685785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087727Jy sigma=0.000623 ! Fit after self-cal, rms=0.087786Jy sigma=0.000622 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* KP 0.96 ! LA 1.06 MK 1.00* NL 1.01 OV 1.18 ! PT 1.10 ! ! ! Correcting IF 2. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00* KP 1.02 ! LA 1.02 MK 1.00* NL 1.00* OV 1.09 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.01 MK 1.00* NL 1.00* OV 1.06 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.087786Jy sigma=0.000622 ! Fit after self-cal, rms=0.071925Jy sigma=0.000582 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.35 mas, bmaj=22.26 mas, bpa=2.259 degrees ! Estimated noise=1078.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015386 Jy ! Component: 100 - total flux cleaned = 0.00229859 Jy ! Component: 150 - total flux cleaned = 0.00251978 Jy ! Component: 200 - total flux cleaned = 0.00264215 Jy ! Total flux subtracted in 200 components = 0.00264215 Jy ! Clean residual min=-0.002590 max=0.002813 Jy/beam ! Clean residual mean=-0.000001 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.0712207 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.0712207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071883Jy sigma=0.000582 ! Fit after self-cal, rms=0.071847Jy sigma=0.000581 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071847Jy sigma=0.000581 ! Fit after self-cal, rms=0.071597Jy sigma=0.000579 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.28 mas, bmaj=22.12 mas, bpa=1.254 degrees ! Estimated noise=1092.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108405 Jy ! Component: 100 - total flux cleaned = 0.00150383 Jy ! Component: 150 - total flux cleaned = 0.00165023 Jy ! Component: 200 - total flux cleaned = 0.00168104 Jy ! Total flux subtracted in 200 components = 0.00168104 Jy ! Clean residual min=-0.002257 max=0.002707 Jy/beam ! Clean residual mean=-0.000002 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0729017 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.0729017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071576Jy sigma=0.000579 ! Fit after self-cal, rms=0.071576Jy sigma=0.000579 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204498 Jy ! Component: 100 - total flux cleaned = 0.000304358 Jy ! Component: 150 - total flux cleaned = 0.000375563 Jy ! Component: 200 - total flux cleaned = 0.000440001 Jy ! Total flux subtracted in 200 components = 0.000440001 Jy ! Clean residual min=-0.002152 max=0.002522 Jy/beam ! Clean residual mean=-0.000001 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0733417 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.0733417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071567Jy sigma=0.000579 ! Fit after self-cal, rms=0.071565Jy sigma=0.000579 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071565Jy sigma=0.000579 ! Fit after self-cal, rms=0.071939Jy sigma=0.000579 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.19 mas, bmaj=22.12 mas, bpa=0.6692 degrees ! Estimated noise=1097.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589002 Jy ! Component: 100 - total flux cleaned = 0.000725251 Jy ! Component: 150 - total flux cleaned = 0.00077995 Jy ! Component: 200 - total flux cleaned = 0.000792633 Jy ! Total flux subtracted in 200 components = 0.000792633 Jy ! Clean residual min=-0.002075 max=0.002521 Jy/beam ! Clean residual mean=-0.000002 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0741343 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 0.0741343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071929Jy sigma=0.000578 ! Fit after self-cal, rms=0.071945Jy sigma=0.000578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.89322e-05 Jy ! Component: 100 - total flux cleaned = 2.35347e-05 Jy ! Component: 150 - total flux cleaned = 4.97697e-05 Jy ! Component: 200 - total flux cleaned = 7.46523e-05 Jy ! Total flux subtracted in 200 components = 7.46523e-05 Jy ! Clean residual min=-0.002121 max=0.002552 Jy/beam ! Clean residual mean=-0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.074209 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 0.074209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071940Jy sigma=0.000578 ! Fit after self-cal, rms=0.071938Jy sigma=0.000578 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071938Jy sigma=0.000578 ! Fit after self-cal, rms=0.072298Jy sigma=0.000578 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.38 mas, bmaj=23.54 mas, bpa=3.585 degrees ! Estimated noise=1106.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057109 Jy ! Component: 100 - total flux cleaned = 0.000681743 Jy ! Component: 150 - total flux cleaned = 0.000746888 Jy ! Component: 200 - total flux cleaned = 0.000794905 Jy ! Total flux subtracted in 200 components = 0.000794905 Jy ! Clean residual min=-0.002084 max=0.002518 Jy/beam ! Clean residual mean=-0.000002 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0750039 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 113 components and 0.0750039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072291Jy sigma=0.000578 ! Fit after self-cal, rms=0.072286Jy sigma=0.000578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55533e-06 Jy ! Component: 100 - total flux cleaned = 4.34801e-05 Jy ! Component: 150 - total flux cleaned = 9.14801e-05 Jy ! Component: 200 - total flux cleaned = 0.000125393 Jy ! Total flux subtracted in 200 components = 0.000125393 Jy ! Clean residual min=-0.002067 max=0.002508 Jy/beam ! Clean residual mean=-0.000002 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.0751293 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.0751293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072282Jy sigma=0.000578 ! Fit after self-cal, rms=0.072281Jy sigma=0.000578 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=13.13 mas, bmaj=22.13 mas, bpa=0.3495 degrees ! Estimated noise=1101.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.13 x 22.13 at 0.3495 degrees (North through East) ! Clean map min=-0.0021141 max=0.060896 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.717 mas, bmaj=14.13 mas, bpa=1.449 degrees ! Estimated noise=1937.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441994 Jy ! Component: 100 - total flux cleaned = 0.0554408 Jy ! Component: 150 - total flux cleaned = 0.0616519 Jy ! Component: 200 - total flux cleaned = 0.0658596 Jy ! Total flux subtracted in 200 components = 0.0658596 Jy ! Clean residual min=-0.005072 max=0.004630 Jy/beam ! Clean residual mean=-0.000021 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.0658596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.0658596 Jy ! Inverting map and beam ! Estimated beam: bmin=13.13 mas, bmaj=22.13 mas, bpa=0.3495 degrees ! Estimated noise=1101.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400242 Jy ! Component: 100 - total flux cleaned = 0.00614896 Jy ! Component: 150 - total flux cleaned = 0.00750258 Jy ! Component: 200 - total flux cleaned = 0.00815579 Jy ! Total flux subtracted in 200 components = 0.00815579 Jy ! Clean residual min=-0.002325 max=0.002734 Jy/beam ! Clean residual mean=-0.000001 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0740154 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 89 components and 0.0740154 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.38 mas, bmaj=23.54 mas, bpa=3.585 degrees ! Estimated noise=1106.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306028 Jy ! Component: 100 - total flux cleaned = 0.000511202 Jy ! Component: 150 - total flux cleaned = 0.000604362 Jy ! Component: 200 - total flux cleaned = 0.000638584 Jy ! Total flux subtracted in 200 components = 0.000638584 Jy ! Clean residual min=-0.002017 max=0.002662 Jy/beam ! Clean residual mean=-0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0746539 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21889e-05 Jy ! Component: 100 - total flux cleaned = 6.33289e-05 Jy ! Component: 150 - total flux cleaned = 9.22865e-05 Jy ! Component: 200 - total flux cleaned = 0.000119988 Jy ! Total flux subtracted in 200 components = 0.000119988 Jy ! Clean residual min=-0.001988 max=0.002613 Jy/beam ! Clean residual mean=-0.000001 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0747739 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.0747739 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=13.13 mas, bmaj=22.13 mas, bpa=0.3495 degrees ! Estimated noise=1101.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.87359e-05 Jy ! Component: 100 - total flux cleaned = 5.54443e-05 Jy ! Component: 150 - total flux cleaned = 6.795e-05 Jy ! Component: 200 - total flux cleaned = 8.01876e-05 Jy ! Total flux subtracted in 200 components = 8.01876e-05 Jy ! Clean residual min=-0.002133 max=0.002544 Jy/beam ! Clean residual mean=-0.000002 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0748541 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 110 components and 0.0748541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072282Jy sigma=0.000578 ! Fit after self-cal, rms=0.072256Jy sigma=0.000578 wmodel J0330-0551_S_2017_09_26_pus_map.mod ! Writing 110 model components to file: J0330-0551_S_2017_09_26_pus_map.mod wobs J0330-0551_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0330-0551_S_2017_09_26_pus_uvs.fits wwins J0330-0551_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0330-0551_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854501 Jy ! Component: 100 - total flux cleaned = 0.000856099 Jy ! Component: 150 - total flux cleaned = 0.000857387 Jy ! Component: 200 - total flux cleaned = 0.000883814 Jy ! Component: 250 - total flux cleaned = 0.000931761 Jy ! Component: 300 - total flux cleaned = 0.000844797 Jy ! Component: 350 - total flux cleaned = 0.000823493 Jy ! Component: 400 - total flux cleaned = 0.000879013 Jy ! Component: 450 - total flux cleaned = 0.000878335 Jy ! Component: 500 - total flux cleaned = 0.000894495 Jy ! Component: 550 - total flux cleaned = 0.000894687 Jy ! Component: 600 - total flux cleaned = 0.000895481 Jy ! Component: 650 - total flux cleaned = 0.000836691 Jy ! Component: 700 - total flux cleaned = 0.000779904 Jy ! Component: 750 - total flux cleaned = 0.000725286 Jy ! Component: 800 - total flux cleaned = 0.0006463 Jy ! Component: 850 - total flux cleaned = 0.000504468 Jy ! Component: 900 - total flux cleaned = 0.000390709 Jy ! Component: 950 - total flux cleaned = 0.000253986 Jy ! Component: 1000 - total flux cleaned = 0.000131084 Jy ! Component: 1050 - total flux cleaned = 9.4076e-06 Jy ! Component: 1100 - total flux cleaned = -5.10926e-05 Jy ! Component: 1150 - total flux cleaned = -0.000135133 Jy ! Component: 1200 - total flux cleaned = -0.000182993 Jy ! Component: 1250 - total flux cleaned = -0.000183066 Jy ! Component: 1300 - total flux cleaned = -0.0001951 Jy ! Component: 1350 - total flux cleaned = -0.000219067 Jy ! Component: 1400 - total flux cleaned = -0.000243301 Jy ! Component: 1450 - total flux cleaned = -0.000292067 Jy ! Component: 1500 - total flux cleaned = -0.000341479 Jy ! Component: 1550 - total flux cleaned = -0.000416379 Jy ! Component: 1600 - total flux cleaned = -0.000403748 Jy ! Component: 1650 - total flux cleaned = -0.000403749 Jy ! Component: 1700 - total flux cleaned = -0.000430129 Jy ! Component: 1750 - total flux cleaned = -0.000429912 Jy ! Component: 1800 - total flux cleaned = -0.000457363 Jy ! Component: 1850 - total flux cleaned = -0.000485628 Jy ! Component: 1900 - total flux cleaned = -0.000485542 Jy ! Component: 1950 - total flux cleaned = -0.000514912 Jy ! Component: 2000 - total flux cleaned = -0.000514502 Jy ! Component: 2050 - total flux cleaned = -0.0005767 Jy ! Component: 2100 - total flux cleaned = -0.000592783 Jy ! Component: 2150 - total flux cleaned = -0.000625299 Jy ! Component: 2200 - total flux cleaned = -0.000692509 Jy ! Component: 2250 - total flux cleaned = -0.000675169 Jy ! Component: 2300 - total flux cleaned = -0.000709871 Jy ! Component: 2350 - total flux cleaned = -0.00076327 Jy ! Component: 2400 - total flux cleaned = -0.000818351 Jy ! Component: 2450 - total flux cleaned = -0.000837052 Jy ! Component: 2500 - total flux cleaned = -0.000836844 Jy ! Component: 2550 - total flux cleaned = -0.000876318 Jy ! Component: 2600 - total flux cleaned = -0.000856075 Jy ! Component: 2650 - total flux cleaned = -0.000876329 Jy ! Component: 2700 - total flux cleaned = -0.00087614 Jy ! Component: 2750 - total flux cleaned = -0.000875834 Jy ! Component: 2800 - total flux cleaned = -0.000944243 Jy ! Component: 2850 - total flux cleaned = -0.000897912 Jy ! Component: 2900 - total flux cleaned = -0.000921409 Jy ! Component: 2950 - total flux cleaned = -0.000970546 Jy ! Component: 3000 - total flux cleaned = -0.000945166 Jy ! Component: 3050 - total flux cleaned = -0.000997007 Jy ! Component: 3100 - total flux cleaned = -0.00105021 Jy ! Component: 3150 - total flux cleaned = -0.00110543 Jy ! Component: 3200 - total flux cleaned = -0.00116143 Jy ! Component: 3250 - total flux cleaned = -0.00124964 Jy ! Component: 3300 - total flux cleaned = -0.00124997 Jy ! Component: 3350 - total flux cleaned = -0.00131142 Jy ! Component: 3400 - total flux cleaned = -0.00140607 Jy ! Component: 3450 - total flux cleaned = -0.00140605 Jy ! Component: 3500 - total flux cleaned = -0.00143853 Jy ! Component: 3550 - total flux cleaned = -0.00143753 Jy ! Component: 3600 - total flux cleaned = -0.00147228 Jy ! Component: 3650 - total flux cleaned = -0.00154425 Jy ! Component: 3700 - total flux cleaned = -0.00158183 Jy ! Component: 3750 - total flux cleaned = -0.00165968 Jy ! Component: 3800 - total flux cleaned = -0.00165967 Jy ! Component: 3850 - total flux cleaned = -0.00178245 Jy ! Component: 3900 - total flux cleaned = -0.00178212 Jy ! Component: 3950 - total flux cleaned = -0.00182496 Jy ! Component: 4000 - total flux cleaned = -0.00195914 Jy ! Component: 4050 - total flux cleaned = -0.00200515 Jy ! Total flux subtracted in 4096 components = -0.00200433 Jy ! Clean residual min=-0.002572 max=0.002568 Jy/beam ! Clean residual mean=-0.000004 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.0728498 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 337 components and 0.0728498 Jy ![Exited script file: muppet] wmap "J0330-0551_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.13 x 22.13 at 0.3495 degrees (North through East) ! Clean map min=-0.0061393 max=0.062052 Jy/beam ! Writing clean map to FITS file: J0330-0551_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0620517 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00111507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.39102 5.39102 10.782 21.5641 43.1282 86.2563 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.13 x 22.13 at 0.3495 degrees (North through East) ! Clean map min=-0.0061393 max=0.062052 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0330-0551_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:17 2019