! Started logfile: J0328+2552_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:31 2019 obs J0328+2552_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0328+2552_S_2017_01_16_pus_uva.fits ! AN table 1: 119 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.718581 visibilities/baseline/integration-bin. ! Found source: J0328+2552 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0328+2552_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 226 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 474 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971722Jy sigma=0.008330 ! Fit after self-cal, rms=0.945655Jy sigma=0.008157 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.749 mas, bmaj=7.48 mas, bpa=10.95 degrees ! Estimated noise=1102.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434389 Jy ! Component: 100 - total flux cleaned = 0.0545977 Jy ! Total flux subtracted in 100 components = 0.0545977 Jy ! Clean residual min=-0.004465 max=0.004892 Jy/beam ! Clean residual mean=-0.000011 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.0545977 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0545977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117030Jy sigma=0.000665 ! Fit after self-cal, rms=0.116720Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.419 mas, bmaj=8.041 mas, bpa=11.03 degrees ! Estimated noise=735.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796506 Jy ! Component: 100 - total flux cleaned = 0.0124883 Jy ! Component: 150 - total flux cleaned = 0.0155372 Jy ! Component: 200 - total flux cleaned = 0.0176487 Jy ! Total flux subtracted in 200 components = 0.0176487 Jy ! Clean residual min=-0.002755 max=0.003743 Jy/beam ! Clean residual mean=-0.000013 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.0722464 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 51 components and 0.0722464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116140Jy sigma=0.000655 ! Fit after self-cal, rms=0.116061Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.90 HN 1.00 KP 0.99 ! LA 0.91 MK 1.00* NL 0.89 OV 0.99 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.03 KP 0.96 ! LA 0.91 MK 1.00* NL 1.04 OV 1.11 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.96 HN 1.20 KP 0.95 ! LA 1.01 MK 1.00* NL 1.03 OV 0.99 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.88 KP 1.00* ! LA 0.81 MK 1.00* NL 1.00* OV 1.02 ! PT 0.98 SC 0.36 ! ! ! Fit before self-cal, rms=0.116061Jy sigma=0.000654 ! Fit after self-cal, rms=0.084967Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.449 mas, bmaj=8.146 mas, bpa=10.53 degrees ! Estimated noise=726.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000833344 Jy ! Component: 100 - total flux cleaned = 0.000800982 Jy ! Component: 150 - total flux cleaned = 0.000828899 Jy ! Component: 200 - total flux cleaned = 0.000849824 Jy ! Total flux subtracted in 200 components = 0.000849824 Jy ! Clean residual min=-0.002416 max=0.003040 Jy/beam ! Clean residual mean=-0.000008 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0730962 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.0730962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084940Jy sigma=0.000651 ! Fit after self-cal, rms=0.084969Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084969Jy sigma=0.000650 ! Fit after self-cal, rms=0.088004Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.441 mas, bmaj=8.059 mas, bpa=10.87 degrees ! Estimated noise=730.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510253 Jy ! Component: 100 - total flux cleaned = 0.000705169 Jy ! Component: 150 - total flux cleaned = 0.000787236 Jy ! Component: 200 - total flux cleaned = 0.000838275 Jy ! Total flux subtracted in 200 components = 0.000838275 Jy ! Clean residual min=-0.002117 max=0.002644 Jy/beam ! Clean residual mean=-0.000002 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0739345 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.0739345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087986Jy sigma=0.000646 ! Fit after self-cal, rms=0.088173Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229109 Jy ! Component: 100 - total flux cleaned = 0.00300281 Jy ! Component: 150 - total flux cleaned = 0.00338024 Jy ! Component: 200 - total flux cleaned = 0.00367102 Jy ! Total flux subtracted in 200 components = 0.00367102 Jy ! Clean residual min=-0.001823 max=0.002065 Jy/beam ! Clean residual mean=-0.000002 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0776055 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.0776055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088078Jy sigma=0.000645 ! Fit after self-cal, rms=0.088070Jy sigma=0.000645 ! Inverting map ! Added new window around map position (57.5, 117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181903 Jy ! Component: 100 - total flux cleaned = 0.00217291 Jy ! Component: 150 - total flux cleaned = 0.00229991 Jy ! Component: 200 - total flux cleaned = 0.00245077 Jy ! Total flux subtracted in 200 components = 0.00245077 Jy ! Clean residual min=-0.001767 max=0.002082 Jy/beam ! Clean residual mean=-0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0800563 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 110 components and 0.0800563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088010Jy sigma=0.000644 ! Fit after self-cal, rms=0.088015Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088015Jy sigma=0.000644 ! Fit after self-cal, rms=0.089817Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.418 mas, bmaj=8.015 mas, bpa=10.87 degrees ! Estimated noise=726.043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126995 Jy ! Component: 100 - total flux cleaned = 0.00152828 Jy ! Component: 150 - total flux cleaned = 0.00171867 Jy ! Component: 200 - total flux cleaned = 0.00178848 Jy ! Total flux subtracted in 200 components = 0.00178848 Jy ! Clean residual min=-0.001730 max=0.001798 Jy/beam ! Clean residual mean=-0.000003 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0818447 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.0818448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089774Jy sigma=0.000643 ! Fit after self-cal, rms=0.089839Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038218 Jy ! Component: 100 - total flux cleaned = 0.000483485 Jy ! Component: 150 - total flux cleaned = 0.000484415 Jy ! Component: 200 - total flux cleaned = 0.000484484 Jy ! Total flux subtracted in 200 components = 0.000484484 Jy ! Clean residual min=-0.001713 max=0.001780 Jy/beam ! Clean residual mean=-0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0823292 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 137 components and 0.0823293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089814Jy sigma=0.000643 ! Fit after self-cal, rms=0.089813Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089813Jy sigma=0.000643 ! Fit after self-cal, rms=0.090524Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.076 mas, bmaj=9.978 mas, bpa=-1.664 degrees ! Estimated noise=834.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748064 Jy ! Component: 100 - total flux cleaned = 0.000938321 Jy ! Component: 150 - total flux cleaned = 0.00112117 Jy ! Component: 200 - total flux cleaned = 0.00118811 Jy ! Total flux subtracted in 200 components = 0.00118811 Jy ! Clean residual min=-0.001743 max=0.001889 Jy/beam ! Clean residual mean=-0.000004 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0835174 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 161 components and 0.0835174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090505Jy sigma=0.000643 ! Fit after self-cal, rms=0.090525Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259483 Jy ! Component: 100 - total flux cleaned = 0.000261372 Jy ! Component: 150 - total flux cleaned = 0.000222987 Jy ! Component: 200 - total flux cleaned = 0.000169341 Jy ! Total flux subtracted in 200 components = 0.000169341 Jy ! Clean residual min=-0.001751 max=0.001874 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0836867 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 172 components and 0.0836867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090515Jy sigma=0.000643 ! Fit after self-cal, rms=0.090514Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=8.006 mas, bpa=10.91 degrees ! Estimated noise=725.542 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.399 x 8.006 at 10.91 degrees (North through East) ! Clean map min=-0.0026554 max=0.056382 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=7.423 mas, bpa=11.33 degrees ! Estimated noise=1041.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411145 Jy ! Component: 100 - total flux cleaned = 0.0539817 Jy ! Component: 150 - total flux cleaned = 0.0610609 Jy ! Component: 200 - total flux cleaned = 0.0654685 Jy ! Total flux subtracted in 200 components = 0.0654685 Jy ! Clean residual min=-0.003179 max=0.003226 Jy/beam ! Clean residual mean=-0.000004 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.0654685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0654685 Jy ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=8.006 mas, bpa=10.91 degrees ! Estimated noise=725.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522865 Jy ! Component: 100 - total flux cleaned = 0.00821782 Jy ! Component: 150 - total flux cleaned = 0.0102231 Jy ! Component: 200 - total flux cleaned = 0.0118494 Jy ! Total flux subtracted in 200 components = 0.0118494 Jy ! Clean residual min=-0.001978 max=0.001943 Jy/beam ! Clean residual mean=-0.000005 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.077318 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 57 components and 0.077318 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.076 mas, bmaj=9.978 mas, bpa=-1.664 degrees ! Estimated noise=834.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232303 Jy ! Component: 100 - total flux cleaned = 0.00337182 Jy ! Component: 150 - total flux cleaned = 0.00410488 Jy ! Component: 200 - total flux cleaned = 0.00447705 Jy ! Total flux subtracted in 200 components = 0.00447705 Jy ! Clean residual min=-0.001905 max=0.002010 Jy/beam ! Clean residual mean=-0.000006 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.081795 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032063 Jy ! Component: 100 - total flux cleaned = 0.000499323 Jy ! Component: 150 - total flux cleaned = 0.000564896 Jy ! Component: 200 - total flux cleaned = 0.000653935 Jy ! Total flux subtracted in 200 components = 0.000653935 Jy ! Clean residual min=-0.001863 max=0.001895 Jy/beam ! Clean residual mean=-0.000005 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.082449 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 151 components and 0.082449 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=8.006 mas, bpa=10.91 degrees ! Estimated noise=725.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189374 Jy ! Component: 100 - total flux cleaned = -0.00019137 Jy ! Component: 150 - total flux cleaned = -0.000277882 Jy ! Component: 200 - total flux cleaned = -0.000316757 Jy ! Total flux subtracted in 200 components = -0.000316757 Jy ! Clean residual min=-0.001633 max=0.001892 Jy/beam ! Clean residual mean=-0.000003 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0821322 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 169 components and 0.0821322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090543Jy sigma=0.000643 ! Fit after self-cal, rms=0.090529Jy sigma=0.000643 wmodel J0328+2552_S_2017_01_16_pus_map.mod ! Writing 169 model components to file: J0328+2552_S_2017_01_16_pus_map.mod wobs J0328+2552_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0328+2552_S_2017_01_16_pus_uvs.fits wwins J0328+2552_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J0328+2552_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000731294 Jy ! Component: 100 - total flux cleaned = 0.00123878 Jy ! Component: 150 - total flux cleaned = 0.00157946 Jy ! Component: 200 - total flux cleaned = 0.00182592 Jy ! Component: 250 - total flux cleaned = 0.00206398 Jy ! Component: 300 - total flux cleaned = 0.00219259 Jy ! Component: 350 - total flux cleaned = 0.00234253 Jy ! Component: 400 - total flux cleaned = 0.00253725 Jy ! Component: 450 - total flux cleaned = 0.00267971 Jy ! Component: 500 - total flux cleaned = 0.00281912 Jy ! Component: 550 - total flux cleaned = 0.00290949 Jy ! Component: 600 - total flux cleaned = 0.00293129 Jy ! Component: 650 - total flux cleaned = 0.00301889 Jy ! Component: 700 - total flux cleaned = 0.00306197 Jy ! Component: 750 - total flux cleaned = 0.00314682 Jy ! Component: 800 - total flux cleaned = 0.00323027 Jy ! Component: 850 - total flux cleaned = 0.0033327 Jy ! Component: 900 - total flux cleaned = 0.003353 Jy ! Component: 950 - total flux cleaned = 0.00345272 Jy ! Component: 1000 - total flux cleaned = 0.00353088 Jy ! Component: 1050 - total flux cleaned = 0.00356939 Jy ! Component: 1100 - total flux cleaned = 0.00364536 Jy ! Component: 1150 - total flux cleaned = 0.00368292 Jy ! Component: 1200 - total flux cleaned = 0.00362716 Jy ! Component: 1250 - total flux cleaned = 0.00368258 Jy ! Component: 1300 - total flux cleaned = 0.0037191 Jy ! Component: 1350 - total flux cleaned = 0.00375501 Jy ! Component: 1400 - total flux cleaned = 0.00375492 Jy ! Component: 1450 - total flux cleaned = 0.00377268 Jy ! Component: 1500 - total flux cleaned = 0.00378988 Jy ! Component: 1550 - total flux cleaned = 0.00380711 Jy ! Component: 1600 - total flux cleaned = 0.00384104 Jy ! Component: 1650 - total flux cleaned = 0.00385792 Jy ! Component: 1700 - total flux cleaned = 0.00385774 Jy ! Component: 1750 - total flux cleaned = 0.00389104 Jy ! Component: 1800 - total flux cleaned = 0.00390753 Jy ! Component: 1850 - total flux cleaned = 0.00394005 Jy ! Component: 1900 - total flux cleaned = 0.00397226 Jy ! Component: 1950 - total flux cleaned = 0.00400412 Jy ! Component: 2000 - total flux cleaned = 0.00400409 Jy ! Component: 2050 - total flux cleaned = 0.00408286 Jy ! Component: 2100 - total flux cleaned = 0.00406715 Jy ! Component: 2150 - total flux cleaned = 0.00403619 Jy ! Component: 2200 - total flux cleaned = 0.00406689 Jy ! Component: 2250 - total flux cleaned = 0.00402109 Jy ! Component: 2300 - total flux cleaned = 0.00396075 Jy ! Component: 2350 - total flux cleaned = 0.00400576 Jy ! Component: 2400 - total flux cleaned = 0.00394638 Jy ! Component: 2450 - total flux cleaned = 0.00400558 Jy ! Component: 2500 - total flux cleaned = 0.00397611 Jy ! Component: 2550 - total flux cleaned = 0.00393227 Jy ! Component: 2600 - total flux cleaned = 0.00391794 Jy ! Component: 2650 - total flux cleaned = 0.00390347 Jy ! Component: 2700 - total flux cleaned = 0.00388923 Jy ! Component: 2750 - total flux cleaned = 0.00386094 Jy ! Component: 2800 - total flux cleaned = 0.00386093 Jy ! Component: 2850 - total flux cleaned = 0.00383311 Jy ! Component: 2900 - total flux cleaned = 0.00386085 Jy ! Component: 2950 - total flux cleaned = 0.00381935 Jy ! Component: 3000 - total flux cleaned = 0.00377827 Jy ! Component: 3050 - total flux cleaned = 0.00377832 Jy ! Component: 3100 - total flux cleaned = 0.00372426 Jy ! Component: 3150 - total flux cleaned = 0.00365702 Jy ! Component: 3200 - total flux cleaned = 0.0036971 Jy ! Component: 3250 - total flux cleaned = 0.00364414 Jy ! Component: 3300 - total flux cleaned = 0.00361767 Jy ! Component: 3350 - total flux cleaned = 0.00361762 Jy ! Component: 3400 - total flux cleaned = 0.00357848 Jy ! Component: 3450 - total flux cleaned = 0.00356547 Jy ! Component: 3500 - total flux cleaned = 0.00351399 Jy ! Component: 3550 - total flux cleaned = 0.00352675 Jy ! Component: 3600 - total flux cleaned = 0.00348836 Jy ! Component: 3650 - total flux cleaned = 0.0034503 Jy ! Component: 3700 - total flux cleaned = 0.00340006 Jy ! Component: 3750 - total flux cleaned = 0.0034251 Jy ! Component: 3800 - total flux cleaned = 0.00340006 Jy ! Component: 3850 - total flux cleaned = 0.00332578 Jy ! Component: 3900 - total flux cleaned = 0.00336279 Jy ! Component: 3950 - total flux cleaned = 0.00332601 Jy ! Component: 4000 - total flux cleaned = 0.0032894 Jy ! Component: 4050 - total flux cleaned = 0.0032652 Jy ! Total flux subtracted in 4096 components = 0.00325312 Jy ! Clean residual min=-0.000732 max=0.000760 Jy/beam ! Clean residual mean=-0.000001 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.0853853 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 486 components and 0.0853853 Jy ![Exited script file: muppet] wmap "J0328+2552_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.399 x 8.006 at 10.91 degrees (North through East) ! Clean map min=-0.0023348 max=0.056401 Jy/beam ! Writing clean map to FITS file: J0328+2552_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0564012 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236832 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25972 1.25972 2.51943 5.03886 10.0777 20.1554 40.3109 80.6218 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.399 x 8.006 at 10.91 degrees (North through East) ! Clean map min=-0.0023348 max=0.056401 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0328+2552_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:37 2019