! Started logfile: J0327-1803_S_2017_10_21_pus_uvs.log on Sat May 11 20:49:18 2019 obs J0327-1803_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0327-1803_S_2017_10_21_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.988465 visibilities/baseline/integration-bin. ! Found source: J0327-1803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0327-1803_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 420 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942942Jy sigma=0.008558 ! Fit after self-cal, rms=0.917339Jy sigma=0.008312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=18.59 mas, bpa=-15.94 degrees ! Estimated noise=1324.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665007 Jy ! Component: 100 - total flux cleaned = 0.081476 Jy ! Total flux subtracted in 100 components = 0.081476 Jy ! Clean residual min=-0.006105 max=0.005476 Jy/beam ! Clean residual mean=-0.000037 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.081476 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.081476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087782Jy sigma=0.000716 ! Fit after self-cal, rms=0.087775Jy sigma=0.000716 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=19.86 mas, bpa=-15.73 degrees ! Estimated noise=725.995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059095 Jy ! Component: 100 - total flux cleaned = 0.00893325 Jy ! Component: 150 - total flux cleaned = 0.010693 Jy ! Component: 200 - total flux cleaned = 0.0109739 Jy ! Total flux subtracted in 200 components = 0.0109739 Jy ! Clean residual min=-0.003982 max=0.003183 Jy/beam ! Clean residual mean=-0.000022 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0924499 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 45 components and 0.0924499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087281Jy sigma=0.000713 ! Fit after self-cal, rms=0.087290Jy sigma=0.000713 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00 HN 0.98 KP 1.13 ! LA 1.01 MK 1.01 NL 0.91 OV 1.02 ! PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.02 KP 1.07 ! LA 0.95 MK 1.02 NL 1.11 OV 1.05 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 1.04 ! LA 0.76 MK 1.08 NL 1.16 OV 0.95 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.96 KP 0.98 ! LA 0.83 MK 0.94 NL 1.00* OV 1.00* ! PT 0.88 ! ! ! Fit before self-cal, rms=0.087290Jy sigma=0.000713 ! Fit after self-cal, rms=0.082810Jy sigma=0.000707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=19.53 mas, bpa=-15.65 degrees ! Estimated noise=724.024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.60962e-05 Jy ! Component: 100 - total flux cleaned = -0.000155172 Jy ! Component: 150 - total flux cleaned = -0.000199014 Jy ! Component: 200 - total flux cleaned = -0.000219674 Jy ! Total flux subtracted in 200 components = -0.000219674 Jy ! Clean residual min=-0.001604 max=0.001966 Jy/beam ! Clean residual mean=-0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0922303 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.0922303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082797Jy sigma=0.000707 ! Fit after self-cal, rms=0.082787Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082787Jy sigma=0.000707 ! Fit after self-cal, rms=0.082937Jy sigma=0.000707 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=19.54 mas, bpa=-15.67 degrees ! Estimated noise=724.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85965e-05 Jy ! Component: 100 - total flux cleaned = -7.71297e-05 Jy ! Component: 150 - total flux cleaned = -0.000111183 Jy ! Component: 200 - total flux cleaned = -0.000141596 Jy ! Total flux subtracted in 200 components = -0.000141596 Jy ! Clean residual min=-0.001590 max=0.001910 Jy/beam ! Clean residual mean=-0.000003 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0920887 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.0920887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082929Jy sigma=0.000707 ! Fit after self-cal, rms=0.082953Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17459e-05 Jy ! Component: 100 - total flux cleaned = -1.44987e-05 Jy ! Component: 150 - total flux cleaned = -4.034e-05 Jy ! Component: 200 - total flux cleaned = -7.67876e-05 Jy ! Total flux subtracted in 200 components = -7.67876e-05 Jy ! Clean residual min=-0.001580 max=0.001863 Jy/beam ! Clean residual mean=-0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0920119 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.0920119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082949Jy sigma=0.000707 ! Fit after self-cal, rms=0.082950Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082950Jy sigma=0.000707 ! Fit after self-cal, rms=0.083060Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=19.56 mas, bpa=-15.69 degrees ! Estimated noise=725.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130157 Jy ! Component: 100 - total flux cleaned = -0.000142983 Jy ! Component: 150 - total flux cleaned = -0.000154893 Jy ! Component: 200 - total flux cleaned = -0.000176574 Jy ! Total flux subtracted in 200 components = -0.000176574 Jy ! Clean residual min=-0.001600 max=0.001828 Jy/beam ! Clean residual mean=-0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0918353 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.0918353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083057Jy sigma=0.000707 ! Fit after self-cal, rms=0.083064Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6291e-06 Jy ! Component: 100 - total flux cleaned = 1.89487e-06 Jy ! Component: 150 - total flux cleaned = 1.59162e-06 Jy ! Component: 200 - total flux cleaned = 1.6459e-06 Jy ! Total flux subtracted in 200 components = 1.6459e-06 Jy ! Clean residual min=-0.001610 max=0.001819 Jy/beam ! Clean residual mean=-0.000003 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.091837 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.091837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083062Jy sigma=0.000707 ! Fit after self-cal, rms=0.083063Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083063Jy sigma=0.000707 ! Fit after self-cal, rms=0.083148Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.845 mas, bmaj=24.95 mas, bpa=-4.695 degrees ! Estimated noise=872.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66886e-05 Jy ! Component: 100 - total flux cleaned = -8.32708e-05 Jy ! Component: 150 - total flux cleaned = -7.33101e-05 Jy ! Component: 200 - total flux cleaned = -3.72522e-05 Jy ! Total flux subtracted in 200 components = -3.72522e-05 Jy ! Clean residual min=-0.002163 max=0.002336 Jy/beam ! Clean residual mean=-0.000005 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0917997 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 112 components and 0.0917997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083148Jy sigma=0.000707 ! Fit after self-cal, rms=0.083152Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.14962e-06 Jy ! Component: 100 - total flux cleaned = 3.29796e-05 Jy ! Component: 150 - total flux cleaned = 4.88881e-05 Jy ! Component: 200 - total flux cleaned = 5.65004e-05 Jy ! Total flux subtracted in 200 components = 5.65004e-05 Jy ! Clean residual min=-0.002152 max=0.002332 Jy/beam ! Clean residual mean=-0.000005 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0918562 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.0918562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083152Jy sigma=0.000707 ! Fit after self-cal, rms=0.083152Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=19.58 mas, bpa=-15.71 degrees ! Estimated noise=725.583 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 19.58 at -15.71 degrees (North through East) ! Clean map min=-0.0015359 max=0.08203 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=18.14 mas, bpa=-15.9 degrees ! Estimated noise=1325.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066385 Jy ! Component: 100 - total flux cleaned = 0.0814331 Jy ! Component: 150 - total flux cleaned = 0.0871949 Jy ! Component: 200 - total flux cleaned = 0.0901953 Jy ! Total flux subtracted in 200 components = 0.0901953 Jy ! Clean residual min=-0.004537 max=0.004192 Jy/beam ! Clean residual mean=-0.000011 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.0901953 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0901953 Jy ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=19.58 mas, bpa=-15.71 degrees ! Estimated noise=725.583 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083214 Jy ! Component: 100 - total flux cleaned = 0.00100194 Jy ! Component: 150 - total flux cleaned = 0.00100232 Jy ! Component: 200 - total flux cleaned = 0.00100235 Jy ! Total flux subtracted in 200 components = 0.00100235 Jy ! Clean residual min=-0.001718 max=0.001805 Jy/beam ! Clean residual mean=-0.000003 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0911976 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0911976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.845 mas, bmaj=24.95 mas, bpa=-4.695 degrees ! Estimated noise=872.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432238 Jy ! Component: 100 - total flux cleaned = 0.000471504 Jy ! Component: 150 - total flux cleaned = 0.000504416 Jy ! Component: 200 - total flux cleaned = 0.000519379 Jy ! Total flux subtracted in 200 components = 0.000519379 Jy ! Clean residual min=-0.002140 max=0.002288 Jy/beam ! Clean residual mean=-0.000005 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.091717 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.66662e-05 Jy ! Component: 100 - total flux cleaned = 5.02924e-05 Jy ! Component: 150 - total flux cleaned = 7.17762e-05 Jy ! Component: 200 - total flux cleaned = 8.167e-05 Jy ! Total flux subtracted in 200 components = 8.167e-05 Jy ! Clean residual min=-0.002126 max=0.002305 Jy/beam ! Clean residual mean=-0.000005 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0917987 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 0.0917987 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=19.58 mas, bpa=-15.71 degrees ! Estimated noise=725.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.73671e-05 Jy ! Component: 100 - total flux cleaned = -0.000116187 Jy ! Component: 150 - total flux cleaned = -0.000116224 Jy ! Component: 200 - total flux cleaned = -0.0001163 Jy ! Total flux subtracted in 200 components = -0.0001163 Jy ! Clean residual min=-0.001631 max=0.001843 Jy/beam ! Clean residual mean=-0.000003 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0916824 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.0916824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083158Jy sigma=0.000707 ! Fit after self-cal, rms=0.083150Jy sigma=0.000707 wmodel J0327-1803_S_2017_10_21_pus_map.mod ! Writing 77 model components to file: J0327-1803_S_2017_10_21_pus_map.mod wobs J0327-1803_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0327-1803_S_2017_10_21_pus_uvs.fits wwins J0327-1803_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0327-1803_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656033 Jy ! Component: 100 - total flux cleaned = 0.00113498 Jy ! Component: 150 - total flux cleaned = 0.00144563 Jy ! Component: 200 - total flux cleaned = 0.00166258 Jy ! Component: 250 - total flux cleaned = 0.00182181 Jy ! Component: 300 - total flux cleaned = 0.00195026 Jy ! Component: 350 - total flux cleaned = 0.00209361 Jy ! Component: 400 - total flux cleaned = 0.00223192 Jy ! Component: 450 - total flux cleaned = 0.00234596 Jy ! Component: 500 - total flux cleaned = 0.00243723 Jy ! Component: 550 - total flux cleaned = 0.00252551 Jy ! Component: 600 - total flux cleaned = 0.00264486 Jy ! Component: 650 - total flux cleaned = 0.00266175 Jy ! Component: 700 - total flux cleaned = 0.00266223 Jy ! Component: 750 - total flux cleaned = 0.00266233 Jy ! Component: 800 - total flux cleaned = 0.00261691 Jy ! Component: 850 - total flux cleaned = 0.00258758 Jy ! Component: 900 - total flux cleaned = 0.00257278 Jy ! Component: 950 - total flux cleaned = 0.0025307 Jy ! Component: 1000 - total flux cleaned = 0.00251701 Jy ! Component: 1050 - total flux cleaned = 0.00249002 Jy ! Component: 1100 - total flux cleaned = 0.00246361 Jy ! Component: 1150 - total flux cleaned = 0.00245025 Jy ! Component: 1200 - total flux cleaned = 0.00241195 Jy ! Component: 1250 - total flux cleaned = 0.00239962 Jy ! Component: 1300 - total flux cleaned = 0.00237533 Jy ! Component: 1350 - total flux cleaned = 0.00235134 Jy ! Component: 1400 - total flux cleaned = 0.00233948 Jy ! Component: 1450 - total flux cleaned = 0.0023626 Jy ! Component: 1500 - total flux cleaned = 0.00239691 Jy ! Component: 1550 - total flux cleaned = 0.00243079 Jy ! Component: 1600 - total flux cleaned = 0.00244207 Jy ! Component: 1650 - total flux cleaned = 0.00245325 Jy ! Component: 1700 - total flux cleaned = 0.0024642 Jy ! Component: 1750 - total flux cleaned = 0.00244224 Jy ! Component: 1800 - total flux cleaned = 0.00239872 Jy ! Component: 1850 - total flux cleaned = 0.00238788 Jy ! Component: 1900 - total flux cleaned = 0.00234467 Jy ! Component: 1950 - total flux cleaned = 0.00230171 Jy ! Component: 2000 - total flux cleaned = 0.00228029 Jy ! Component: 2050 - total flux cleaned = 0.00223751 Jy ! Component: 2100 - total flux cleaned = 0.00221614 Jy ! Component: 2150 - total flux cleaned = 0.00218414 Jy ! Component: 2200 - total flux cleaned = 0.00213086 Jy ! Component: 2250 - total flux cleaned = 0.00209899 Jy ! Component: 2300 - total flux cleaned = 0.00205636 Jy ! Component: 2350 - total flux cleaned = 0.00201351 Jy ! Component: 2400 - total flux cleaned = 0.00198118 Jy ! Component: 2450 - total flux cleaned = 0.00193805 Jy ! Component: 2500 - total flux cleaned = 0.00188377 Jy ! Component: 2550 - total flux cleaned = 0.00184013 Jy ! Component: 2600 - total flux cleaned = 0.00179621 Jy ! Component: 2650 - total flux cleaned = 0.00176304 Jy ! Component: 2700 - total flux cleaned = 0.00174082 Jy ! Component: 2750 - total flux cleaned = 0.00169606 Jy ! Component: 2800 - total flux cleaned = 0.00166213 Jy ! Component: 2850 - total flux cleaned = 0.00163927 Jy ! Component: 2900 - total flux cleaned = 0.0016161 Jy ! Component: 2950 - total flux cleaned = 0.00159271 Jy ! Component: 3000 - total flux cleaned = 0.001569 Jy ! Component: 3050 - total flux cleaned = 0.00154487 Jy ! Component: 3100 - total flux cleaned = 0.00152027 Jy ! Component: 3150 - total flux cleaned = 0.0015078 Jy ! Component: 3200 - total flux cleaned = 0.00148247 Jy ! Component: 3250 - total flux cleaned = 0.00145703 Jy ! Component: 3300 - total flux cleaned = 0.0014311 Jy ! Component: 3350 - total flux cleaned = 0.00136465 Jy ! Component: 3400 - total flux cleaned = 0.00133743 Jy ! Component: 3450 - total flux cleaned = 0.00129598 Jy ! Component: 3500 - total flux cleaned = 0.00125383 Jy ! Component: 3550 - total flux cleaned = 0.00123959 Jy ! Component: 3600 - total flux cleaned = 0.001196 Jy ! Component: 3650 - total flux cleaned = 0.00115124 Jy ! Component: 3700 - total flux cleaned = 0.00113598 Jy ! Component: 3750 - total flux cleaned = 0.00110512 Jy ! Component: 3800 - total flux cleaned = 0.0010419 Jy ! Component: 3850 - total flux cleaned = 0.00100956 Jy ! Component: 3900 - total flux cleaned = 0.000960335 Jy ! Component: 3950 - total flux cleaned = 0.000910059 Jy ! Component: 4000 - total flux cleaned = 0.000858702 Jy ! Component: 4050 - total flux cleaned = 0.000788704 Jy ! Total flux subtracted in 4096 components = 0.000753008 Jy ! Clean residual min=-0.001170 max=0.000991 Jy/beam ! Clean residual mean=-0.000004 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.0924354 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 359 components and 0.0924354 Jy ![Exited script file: muppet] wmap "J0327-1803_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 19.58 at -15.71 degrees (North through East) ! Clean map min=-0.0015684 max=0.083647 Jy/beam ! Writing clean map to FITS file: J0327-1803_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0836469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000281742 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01047 1.01047 2.02094 4.04188 8.08375 16.1675 32.335 64.67 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.169 x 19.58 at -15.71 degrees (North through East) ! Clean map min=-0.0015684 max=0.083647 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0327-1803_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:23 2019