! Started logfile: J0327-1803_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:40 2019 obs J0327-1803_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0327-1803_S_2017_10_09_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.581797 visibilities/baseline/integration-bin. ! Found source: J0327-1803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 19688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0327-1803_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 493 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 728 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 610 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1660 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938303Jy sigma=0.007389 ! Fit after self-cal, rms=0.916167Jy sigma=0.007235 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=18.12 mas, bpa=-13.11 degrees ! Estimated noise=1625.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0659644 Jy ! Component: 100 - total flux cleaned = 0.0812442 Jy ! Total flux subtracted in 100 components = 0.0812442 Jy ! Clean residual min=-0.004361 max=0.006016 Jy/beam ! Clean residual mean=-0.000010 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.0812442 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0812442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091352Jy sigma=0.000659 ! Fit after self-cal, rms=0.091317Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=21.6 mas, bpa=-13.28 degrees ! Estimated noise=792.464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794489 Jy ! Component: 100 - total flux cleaned = 0.0116027 Jy ! Component: 150 - total flux cleaned = 0.0135855 Jy ! Component: 200 - total flux cleaned = 0.0148502 Jy ! Total flux subtracted in 200 components = 0.0148502 Jy ! Clean residual min=-0.002859 max=0.002940 Jy/beam ! Clean residual mean=-0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.0960944 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 66 components and 0.0960944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090603Jy sigma=0.000654 ! Fit after self-cal, rms=0.090569Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.93 HN 1.02 KP 1.04 ! LA 1.02 MK 1.04 NL 0.92 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.03 KP 1.03 ! LA 0.99 MK 1.04 NL 1.04 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.00 KP 0.91 ! LA 0.80 MK 1.04 NL 1.16 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.92 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.090569Jy sigma=0.000653 ! Fit after self-cal, rms=0.089364Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=21.96 mas, bpa=-13.27 degrees ! Estimated noise=794.189 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000781791 Jy ! Component: 100 - total flux cleaned = -0.000928089 Jy ! Component: 150 - total flux cleaned = -0.00101595 Jy ! Component: 200 - total flux cleaned = -0.00103059 Jy ! Total flux subtracted in 200 components = -0.00103059 Jy ! Clean residual min=-0.002344 max=0.001766 Jy/beam ! Clean residual mean=-0.000001 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0950638 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.0950638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089353Jy sigma=0.000650 ! Fit after self-cal, rms=0.089334Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089334Jy sigma=0.000650 ! Fit after self-cal, rms=0.089638Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=22.06 mas, bpa=-13.29 degrees ! Estimated noise=793.932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513799 Jy ! Component: 100 - total flux cleaned = -0.000553731 Jy ! Component: 150 - total flux cleaned = -0.000600049 Jy ! Component: 200 - total flux cleaned = -0.000627488 Jy ! Total flux subtracted in 200 components = -0.000627488 Jy ! Clean residual min=-0.002122 max=0.001755 Jy/beam ! Clean residual mean=0.000003 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0944363 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.0944363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089628Jy sigma=0.000650 ! Fit after self-cal, rms=0.089642Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.66881e-06 Jy ! Component: 100 - total flux cleaned = -1.90496e-06 Jy ! Component: 150 - total flux cleaned = -2.40883e-05 Jy ! Component: 200 - total flux cleaned = -5.51281e-05 Jy ! Total flux subtracted in 200 components = -5.51281e-05 Jy ! Clean residual min=-0.002155 max=0.001758 Jy/beam ! Clean residual mean=0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0943812 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.0943812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089637Jy sigma=0.000650 ! Fit after self-cal, rms=0.089637Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089637Jy sigma=0.000650 ! Fit after self-cal, rms=0.089900Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=22.13 mas, bpa=-13.31 degrees ! Estimated noise=794.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374038 Jy ! Component: 100 - total flux cleaned = -0.00049761 Jy ! Component: 150 - total flux cleaned = -0.000563189 Jy ! Component: 200 - total flux cleaned = -0.000610632 Jy ! Total flux subtracted in 200 components = -0.000610632 Jy ! Clean residual min=-0.002085 max=0.001704 Jy/beam ! Clean residual mean=0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0937706 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.0937706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089894Jy sigma=0.000650 ! Fit after self-cal, rms=0.089898Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.66587e-05 Jy ! Component: 100 - total flux cleaned = -3.00627e-05 Jy ! Component: 150 - total flux cleaned = -6.97811e-05 Jy ! Component: 200 - total flux cleaned = -9.7531e-05 Jy ! Total flux subtracted in 200 components = -9.7531e-05 Jy ! Clean residual min=-0.002104 max=0.001710 Jy/beam ! Clean residual mean=0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.093673 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.093673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089894Jy sigma=0.000650 ! Fit after self-cal, rms=0.089894Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089894Jy sigma=0.000650 ! Fit after self-cal, rms=0.090092Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.833 mas, bmaj=22.67 mas, bpa=-8.662 degrees ! Estimated noise=942.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000476415 Jy ! Component: 100 - total flux cleaned = -0.000584801 Jy ! Component: 150 - total flux cleaned = -0.000664003 Jy ! Component: 200 - total flux cleaned = -0.00072229 Jy ! Total flux subtracted in 200 components = -0.00072229 Jy ! Clean residual min=-0.001804 max=0.001871 Jy/beam ! Clean residual mean=0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0929507 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 0.0929507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090087Jy sigma=0.000650 ! Fit after self-cal, rms=0.090092Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25263e-06 Jy ! Component: 100 - total flux cleaned = -7.54317e-05 Jy ! Component: 150 - total flux cleaned = -0.00012606 Jy ! Component: 200 - total flux cleaned = -0.000179919 Jy ! Total flux subtracted in 200 components = -0.000179919 Jy ! Clean residual min=-0.001795 max=0.001880 Jy/beam ! Clean residual mean=0.000000 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0927708 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 120 components and 0.0927708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090090Jy sigma=0.000650 ! Fit after self-cal, rms=0.090090Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=22.18 mas, bpa=-13.32 degrees ! Estimated noise=794.851 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.342 x 22.18 at -13.32 degrees (North through East) ! Clean map min=-0.002024 max=0.086864 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.794 mas, bmaj=18.68 mas, bpa=-13.15 degrees ! Estimated noise=1658.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0668504 Jy ! Component: 100 - total flux cleaned = 0.0821913 Jy ! Component: 150 - total flux cleaned = 0.0888414 Jy ! Component: 200 - total flux cleaned = 0.0915197 Jy ! Total flux subtracted in 200 components = 0.0915197 Jy ! Clean residual min=-0.003684 max=0.003214 Jy/beam ! Clean residual mean=0.000004 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.0915197 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0915197 Jy ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=22.18 mas, bpa=-13.32 degrees ! Estimated noise=794.851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170544 Jy ! Component: 100 - total flux cleaned = 0.00175172 Jy ! Component: 150 - total flux cleaned = 0.00175259 Jy ! Component: 200 - total flux cleaned = 0.00172522 Jy ! Total flux subtracted in 200 components = 0.00172522 Jy ! Clean residual min=-0.002047 max=0.001728 Jy/beam ! Clean residual mean=0.000002 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0932449 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.0932449 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.833 mas, bmaj=22.67 mas, bpa=-8.662 degrees ! Estimated noise=942.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.19244e-05 Jy ! Component: 100 - total flux cleaned = -1.67689e-05 Jy ! Component: 150 - total flux cleaned = -0.000126833 Jy ! Component: 200 - total flux cleaned = -0.000174583 Jy ! Total flux subtracted in 200 components = -0.000174583 Jy ! Clean residual min=-0.001889 max=0.001865 Jy/beam ! Clean residual mean=0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0930703 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.35624e-05 Jy ! Component: 100 - total flux cleaned = -5.67045e-05 Jy ! Component: 150 - total flux cleaned = -6.94975e-05 Jy ! Component: 200 - total flux cleaned = -9.21102e-05 Jy ! Total flux subtracted in 200 components = -9.21102e-05 Jy ! Clean residual min=-0.001842 max=0.001867 Jy/beam ! Clean residual mean=0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0929782 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 80 components and 0.0929782 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=22.18 mas, bpa=-13.32 degrees ! Estimated noise=794.851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192719 Jy ! Component: 100 - total flux cleaned = 0.000127749 Jy ! Component: 150 - total flux cleaned = 7.44367e-05 Jy ! Component: 200 - total flux cleaned = 1.09016e-05 Jy ! Total flux subtracted in 200 components = 1.09016e-05 Jy ! Clean residual min=-0.002078 max=0.001723 Jy/beam ! Clean residual mean=0.000002 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0929891 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.0929891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090104Jy sigma=0.000650 ! Fit after self-cal, rms=0.090085Jy sigma=0.000650 wmodel J0327-1803_S_2017_10_09_pus_map.mod ! Writing 100 model components to file: J0327-1803_S_2017_10_09_pus_map.mod wobs J0327-1803_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0327-1803_S_2017_10_09_pus_uvs.fits wwins J0327-1803_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0327-1803_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000620843 Jy ! Component: 100 - total flux cleaned = -0.000915759 Jy ! Component: 150 - total flux cleaned = -0.00107891 Jy ! Component: 200 - total flux cleaned = -0.00110422 Jy ! Component: 250 - total flux cleaned = -0.00112788 Jy ! Component: 300 - total flux cleaned = -0.0011965 Jy ! Component: 350 - total flux cleaned = -0.00121838 Jy ! Component: 400 - total flux cleaned = -0.00130113 Jy ! Component: 450 - total flux cleaned = -0.00134032 Jy ! Component: 500 - total flux cleaned = -0.001417 Jy ! Component: 550 - total flux cleaned = -0.00150867 Jy ! Component: 600 - total flux cleaned = -0.00159596 Jy ! Component: 650 - total flux cleaned = -0.00157845 Jy ! Component: 700 - total flux cleaned = -0.00157872 Jy ! Component: 750 - total flux cleaned = -0.0015789 Jy ! Component: 800 - total flux cleaned = -0.00156316 Jy ! Component: 850 - total flux cleaned = -0.00153352 Jy ! Component: 900 - total flux cleaned = -0.00154833 Jy ! Component: 950 - total flux cleaned = -0.00153393 Jy ! Component: 1000 - total flux cleaned = -0.00150642 Jy ! Component: 1050 - total flux cleaned = -0.00149298 Jy ! Component: 1100 - total flux cleaned = -0.00151956 Jy ! Component: 1150 - total flux cleaned = -0.00153268 Jy ! Component: 1200 - total flux cleaned = -0.00154548 Jy ! Component: 1250 - total flux cleaned = -0.00147104 Jy ! Component: 1300 - total flux cleaned = -0.00142231 Jy ! Component: 1350 - total flux cleaned = -0.00138648 Jy ! Component: 1400 - total flux cleaned = -0.00131595 Jy ! Component: 1450 - total flux cleaned = -0.00127006 Jy ! Component: 1500 - total flux cleaned = -0.00122485 Jy ! Component: 1550 - total flux cleaned = -0.00116907 Jy ! Component: 1600 - total flux cleaned = -0.00110353 Jy ! Component: 1650 - total flux cleaned = -0.00103897 Jy ! Component: 1700 - total flux cleaned = -0.000943649 Jy ! Component: 1750 - total flux cleaned = -0.000849837 Jy ! Component: 1800 - total flux cleaned = -0.000798514 Jy ! Component: 1850 - total flux cleaned = -0.000727606 Jy ! Component: 1900 - total flux cleaned = -0.000687512 Jy ! Component: 1950 - total flux cleaned = -0.000589123 Jy ! Component: 2000 - total flux cleaned = -0.000550331 Jy ! Component: 2050 - total flux cleaned = -0.000464121 Jy ! Component: 2100 - total flux cleaned = -0.000379033 Jy ! Component: 2150 - total flux cleaned = -0.000322957 Jy ! Component: 2200 - total flux cleaned = -0.00026736 Jy ! Component: 2250 - total flux cleaned = -0.000203201 Jy ! Component: 2300 - total flux cleaned = -0.000139739 Jy ! Component: 2350 - total flux cleaned = -2.33283e-05 Jy ! Component: 2400 - total flux cleaned = 7.39379e-05 Jy ! Component: 2450 - total flux cleaned = 0.000143947 Jy ! Component: 2500 - total flux cleaned = 0.000204588 Jy ! Component: 2550 - total flux cleaned = 0.000264707 Jy ! Component: 2600 - total flux cleaned = 0.000332914 Jy ! Component: 2650 - total flux cleaned = 0.000425636 Jy ! Component: 2700 - total flux cleaned = 0.000467502 Jy ! Component: 2750 - total flux cleaned = 0.000558741 Jy ! Component: 2800 - total flux cleaned = 0.000657354 Jy ! Component: 2850 - total flux cleaned = 0.000722666 Jy ! Component: 2900 - total flux cleaned = 0.00081176 Jy ! Component: 2950 - total flux cleaned = 0.000900166 Jy ! Component: 3000 - total flux cleaned = 0.000964033 Jy ! Component: 3050 - total flux cleaned = 0.00103547 Jy ! Component: 3100 - total flux cleaned = 0.00111428 Jy ! Component: 3150 - total flux cleaned = 0.00120832 Jy ! Component: 3200 - total flux cleaned = 0.00126281 Jy ! Component: 3250 - total flux cleaned = 0.00133254 Jy ! Component: 3300 - total flux cleaned = 0.00141726 Jy ! Component: 3350 - total flux cleaned = 0.00149388 Jy ! Component: 3400 - total flux cleaned = 0.00155487 Jy ! Component: 3450 - total flux cleaned = 0.00164596 Jy ! Component: 3500 - total flux cleaned = 0.00172157 Jy ! Component: 3550 - total flux cleaned = 0.00181198 Jy ! Component: 3600 - total flux cleaned = 0.00188706 Jy ! Component: 3650 - total flux cleaned = 0.00196937 Jy ! Component: 3700 - total flux cleaned = 0.00203652 Jy ! Component: 3750 - total flux cleaned = 0.00212571 Jy ! Component: 3800 - total flux cleaned = 0.00219976 Jy ! Component: 3850 - total flux cleaned = 0.00228094 Jy ! Component: 3900 - total flux cleaned = 0.0023546 Jy ! Component: 3950 - total flux cleaned = 0.00241336 Jy ! Component: 4000 - total flux cleaned = 0.00248667 Jy ! Component: 4050 - total flux cleaned = 0.00258176 Jy ! Total flux subtracted in 4096 components = 0.00265477 Jy ! Clean residual min=-0.000519 max=0.000414 Jy/beam ! Clean residual mean=0.000004 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.0956439 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 370 components and 0.0956439 Jy ![Exited script file: muppet] wmap "J0327-1803_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.342 x 22.18 at -13.32 degrees (North through East) ! Clean map min=-0.0013046 max=0.086914 Jy/beam ! Writing clean map to FITS file: J0327-1803_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0869139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130163 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.449281 0.449281 0.898562 1.79712 3.59425 7.18849 14.377 28.754 57.5079 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.342 x 22.18 at -13.32 degrees (North through East) ! Clean map min=-0.0013046 max=0.086914 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0327-1803_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:45 2019