! Started logfile: J0327+0233_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:39 2019 obs J0327+0233_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0327+0233_S_2017_04_28_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983894 visibilities/baseline/integration-bin. ! Found source: J0327+0233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 38608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0327+0233_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 887 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904201Jy sigma=0.034183 ! Fit after self-cal, rms=0.894820Jy sigma=0.034142 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.622 mas, bmaj=7.91 mas, bpa=-10.4 degrees ! Estimated noise=651.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057595 Jy ! Component: 100 - total flux cleaned = 0.0791493 Jy ! Total flux subtracted in 100 components = 0.0791493 Jy ! Clean residual min=-0.020427 max=0.019588 Jy/beam ! Clean residual mean=-0.000086 rms=0.006218 Jy/beam ! Combined flux in latest and established models = 0.0791493 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0791493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140559Jy sigma=0.002461 ! Fit after self-cal, rms=0.140431Jy sigma=0.002453 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=8.656 mas, bpa=-8.033 degrees ! Estimated noise=375.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025246 Jy ! Component: 100 - total flux cleaned = -0.00379222 Jy ! Component: 150 - total flux cleaned = -0.00477182 Jy ! Component: 200 - total flux cleaned = -0.00534772 Jy ! Total flux subtracted in 200 components = -0.00534772 Jy ! Clean residual min=-0.020742 max=0.022198 Jy/beam ! Clean residual mean=-0.000289 rms=0.006655 Jy/beam ! Combined flux in latest and established models = 0.0738016 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.0738016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138688Jy sigma=0.002432 ! Fit after self-cal, rms=0.138604Jy sigma=0.002432 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.79 HN 0.77 KP 0.76 ! LA 0.81 MK 0.71 NL 0.78 OV 0.77 ! PT 0.78 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.76 HN 0.82 KP 0.73 ! LA 0.73 MK 6.73 NL 0.93 OV 0.77 ! PT 0.79 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.76 HN 0.80 KP 0.78 ! LA 0.76 MK 4.48 NL 0.85 OV 0.72 ! PT 0.77 SC 1.07 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.81 HN 0.88 KP 1.00* ! LA 40.56 MK 0.74 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.138604Jy sigma=0.002432 ! Fit after self-cal, rms=1.354084Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=8.388 mas, bpa=-1.273 degrees ! Estimated noise=421.012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192382 Jy ! Component: 100 - total flux cleaned = 0.00145158 Jy ! Component: 150 - total flux cleaned = 0.00105483 Jy ! Component: 200 - total flux cleaned = 0.00137306 Jy ! Total flux subtracted in 200 components = 0.00137306 Jy ! Clean residual min=-0.003815 max=0.005827 Jy/beam ! Clean residual mean=-0.000018 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.0751747 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.0751747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.353082Jy sigma=0.000716 ! Fit after self-cal, rms=1.353527Jy sigma=0.000706 ! Inverting map ! Added new window around map position (4.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363433 Jy ! Component: 100 - total flux cleaned = 0.00379296 Jy ! Component: 150 - total flux cleaned = 0.00406805 Jy ! Component: 200 - total flux cleaned = 0.00419362 Jy ! Total flux subtracted in 200 components = 0.00419362 Jy ! Clean residual min=-0.003533 max=0.004057 Jy/beam ! Clean residual mean=-0.000019 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0793683 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.0793683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.353036Jy sigma=0.000708 ! Fit after self-cal, rms=1.353034Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.353034Jy sigma=0.000708 ! Fit after self-cal, rms=2.273390Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=8.357 mas, bpa=0.3609 degrees ! Estimated noise=444.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350795 Jy ! Component: 100 - total flux cleaned = 0.00383008 Jy ! Component: 150 - total flux cleaned = 0.00368189 Jy ! Component: 200 - total flux cleaned = 0.00368261 Jy ! Total flux subtracted in 200 components = 0.00368261 Jy ! Clean residual min=-0.003337 max=0.003298 Jy/beam ! Clean residual mean=-0.000010 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0830509 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0830509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.272584Jy sigma=0.000690 ! Fit after self-cal, rms=2.272647Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356553 Jy ! Component: 100 - total flux cleaned = 0.000559823 Jy ! Component: 150 - total flux cleaned = 0.000842605 Jy ! Component: 200 - total flux cleaned = 0.00101892 Jy ! Total flux subtracted in 200 components = 0.00101892 Jy ! Clean residual min=-0.003314 max=0.003190 Jy/beam ! Clean residual mean=-0.000010 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0840698 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 64 components and 0.0840698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.272382Jy sigma=0.000690 ! Fit after self-cal, rms=2.272396Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.272396Jy sigma=0.000690 ! Fit after self-cal, rms=0.861106Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=8.292 mas, bpa=0.2076 degrees ! Estimated noise=450.917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175677 Jy ! Component: 100 - total flux cleaned = 0.00212489 Jy ! Component: 150 - total flux cleaned = 0.0023103 Jy ! Component: 200 - total flux cleaned = 0.00236466 Jy ! Total flux subtracted in 200 components = 0.00236466 Jy ! Clean residual min=-0.002115 max=0.002131 Jy/beam ! Clean residual mean=0.000000 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0864345 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.0864345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.860717Jy sigma=0.000674 ! Fit after self-cal, rms=0.860702Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108107 Jy ! Component: 100 - total flux cleaned = 0.000210394 Jy ! Component: 150 - total flux cleaned = 0.000303131 Jy ! Component: 200 - total flux cleaned = 0.000344774 Jy ! Total flux subtracted in 200 components = 0.000344774 Jy ! Clean residual min=-0.002126 max=0.002074 Jy/beam ! Clean residual mean=-0.000000 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0867793 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.0867793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.860458Jy sigma=0.000674 ! Fit after self-cal, rms=0.860458Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.860458Jy sigma=0.000674 ! Fit after self-cal, rms=0.939887Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=12.25 mas, bpa=3.556 degrees ! Estimated noise=503.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147228 Jy ! Component: 100 - total flux cleaned = 0.00187213 Jy ! Component: 150 - total flux cleaned = 0.00197382 Jy ! Component: 200 - total flux cleaned = 0.00203935 Jy ! Total flux subtracted in 200 components = 0.00203935 Jy ! Clean residual min=-0.001498 max=0.001682 Jy/beam ! Clean residual mean=0.000001 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0888186 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.0888186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.939829Jy sigma=0.000673 ! Fit after self-cal, rms=0.939833Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132546 Jy ! Component: 100 - total flux cleaned = 0.000153033 Jy ! Component: 150 - total flux cleaned = 0.000170395 Jy ! Component: 200 - total flux cleaned = 0.000201974 Jy ! Total flux subtracted in 200 components = 0.000201974 Jy ! Clean residual min=-0.001487 max=0.001611 Jy/beam ! Clean residual mean=0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0890206 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.0890206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.939786Jy sigma=0.000673 ! Fit after self-cal, rms=0.939790Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.281 mas, bpa=0.7976 degrees ! Estimated noise=460.008 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.281 at 0.7976 degrees (North through East) ! Clean map min=-0.0042492 max=0.094947 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=7.463 mas, bpa=-1.115 degrees ! Estimated noise=859.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0750889 Jy ! Component: 100 - total flux cleaned = 0.0918994 Jy ! Component: 150 - total flux cleaned = 0.0927259 Jy ! Component: 200 - total flux cleaned = 0.0910884 Jy ! Total flux subtracted in 200 components = 0.0910884 Jy ! Clean residual min=-0.003952 max=0.004156 Jy/beam ! Clean residual mean=-0.000000 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.0910884 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0910884 Jy ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.281 mas, bpa=0.7976 degrees ! Estimated noise=460.008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000897838 Jy ! Component: 100 - total flux cleaned = -0.00151787 Jy ! Component: 150 - total flux cleaned = -0.00172984 Jy ! Component: 200 - total flux cleaned = -0.00192189 Jy ! Total flux subtracted in 200 components = -0.00192189 Jy ! Clean residual min=-0.002391 max=0.002414 Jy/beam ! Clean residual mean=0.000001 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0891665 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.0891665 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=12.25 mas, bpa=3.556 degrees ! Estimated noise=503.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165724 Jy ! Component: 100 - total flux cleaned = -0.000208435 Jy ! Component: 150 - total flux cleaned = -0.000176801 Jy ! Component: 200 - total flux cleaned = -0.000175957 Jy ! Total flux subtracted in 200 components = -0.000175957 Jy ! Clean residual min=-0.001506 max=0.001736 Jy/beam ! Clean residual mean=0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0889906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18538e-06 Jy ! Component: 100 - total flux cleaned = 2.08299e-05 Jy ! Component: 150 - total flux cleaned = 2.09567e-05 Jy ! Component: 200 - total flux cleaned = 3.90801e-05 Jy ! Total flux subtracted in 200 components = 3.90801e-05 Jy ! Clean residual min=-0.001492 max=0.001664 Jy/beam ! Clean residual mean=0.000002 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0890297 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 66 components and 0.0890297 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.281 mas, bpa=0.7976 degrees ! Estimated noise=460.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.63116e-05 Jy ! Component: 100 - total flux cleaned = 2.21231e-05 Jy ! Component: 150 - total flux cleaned = 2.24156e-05 Jy ! Component: 200 - total flux cleaned = -0.000151281 Jy ! Total flux subtracted in 200 components = -0.000151281 Jy ! Clean residual min=-0.002358 max=0.002183 Jy/beam ! Clean residual mean=0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0888784 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.0888784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.939655Jy sigma=0.000674 ! Fit after self-cal, rms=0.939663Jy sigma=0.000674 wmodel J0327+0233_S_2017_04_28_pus_map.mod ! Writing 77 model components to file: J0327+0233_S_2017_04_28_pus_map.mod wobs J0327+0233_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0327+0233_S_2017_04_28_pus_uvs.fits wwins J0327+0233_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0327+0233_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641274 Jy ! Component: 100 - total flux cleaned = -0.00111534 Jy ! Component: 150 - total flux cleaned = -0.00168265 Jy ! Component: 200 - total flux cleaned = -0.00204819 Jy ! Component: 250 - total flux cleaned = -0.00226141 Jy ! Component: 300 - total flux cleaned = -0.00240081 Jy ! Component: 350 - total flux cleaned = -0.00250328 Jy ! Component: 400 - total flux cleaned = -0.00257071 Jy ! Component: 450 - total flux cleaned = -0.00263683 Jy ! Component: 500 - total flux cleaned = -0.00270213 Jy ! Component: 550 - total flux cleaned = -0.00267008 Jy ! Component: 600 - total flux cleaned = -0.00267097 Jy ! Component: 650 - total flux cleaned = -0.00279721 Jy ! Component: 700 - total flux cleaned = -0.00282814 Jy ! Component: 750 - total flux cleaned = -0.00285877 Jy ! Component: 800 - total flux cleaned = -0.00288904 Jy ! Component: 850 - total flux cleaned = -0.00288899 Jy ! Component: 900 - total flux cleaned = -0.00291833 Jy ! Component: 950 - total flux cleaned = -0.0029186 Jy ! Component: 1000 - total flux cleaned = -0.00294796 Jy ! Component: 1050 - total flux cleaned = -0.00300605 Jy ! Component: 1100 - total flux cleaned = -0.00314969 Jy ! Component: 1150 - total flux cleaned = -0.00326319 Jy ! Component: 1200 - total flux cleaned = -0.00320637 Jy ! Component: 1250 - total flux cleaned = -0.00323455 Jy ! Component: 1300 - total flux cleaned = -0.00329035 Jy ! Component: 1350 - total flux cleaned = -0.00331812 Jy ! Component: 1400 - total flux cleaned = -0.00342807 Jy ! Component: 1450 - total flux cleaned = -0.00340065 Jy ! Component: 1500 - total flux cleaned = -0.00334636 Jy ! Component: 1550 - total flux cleaned = -0.00337322 Jy ! Component: 1600 - total flux cleaned = -0.00334641 Jy ! Component: 1650 - total flux cleaned = -0.00342662 Jy ! Component: 1700 - total flux cleaned = -0.00342649 Jy ! Component: 1750 - total flux cleaned = -0.00340008 Jy ! Component: 1800 - total flux cleaned = -0.00342628 Jy ! Component: 1850 - total flux cleaned = -0.00345237 Jy ! Component: 1900 - total flux cleaned = -0.00340059 Jy ! Component: 1950 - total flux cleaned = -0.00350383 Jy ! Component: 2000 - total flux cleaned = -0.00352952 Jy ! Component: 2050 - total flux cleaned = -0.00352959 Jy ! Component: 2100 - total flux cleaned = -0.00355501 Jy ! Component: 2150 - total flux cleaned = -0.00363093 Jy ! Component: 2200 - total flux cleaned = -0.00365602 Jy ! Component: 2250 - total flux cleaned = -0.003631 Jy ! Component: 2300 - total flux cleaned = -0.00373071 Jy ! Component: 2350 - total flux cleaned = -0.00373069 Jy ! Component: 2400 - total flux cleaned = -0.00380469 Jy ! Component: 2450 - total flux cleaned = -0.00382934 Jy ! Component: 2500 - total flux cleaned = -0.00382917 Jy ! Component: 2550 - total flux cleaned = -0.00390221 Jy ! Component: 2600 - total flux cleaned = -0.0039022 Jy ! Component: 2650 - total flux cleaned = -0.00397478 Jy ! Component: 2700 - total flux cleaned = -0.00404713 Jy ! Component: 2750 - total flux cleaned = -0.00409518 Jy ! Component: 2800 - total flux cleaned = -0.00414302 Jy ! Component: 2850 - total flux cleaned = -0.00426193 Jy ! Component: 2900 - total flux cleaned = -0.00433302 Jy ! Component: 2950 - total flux cleaned = -0.00438013 Jy ! Component: 3000 - total flux cleaned = -0.0044037 Jy ! Component: 3050 - total flux cleaned = -0.00445055 Jy ! Component: 3100 - total flux cleaned = -0.00449722 Jy ! Component: 3150 - total flux cleaned = -0.00459023 Jy ! Component: 3200 - total flux cleaned = -0.00456692 Jy ! Component: 3250 - total flux cleaned = -0.00465954 Jy ! Component: 3300 - total flux cleaned = -0.0046364 Jy ! Component: 3350 - total flux cleaned = -0.0047284 Jy ! Component: 3400 - total flux cleaned = -0.00475128 Jy ! Component: 3450 - total flux cleaned = -0.00479717 Jy ! Component: 3500 - total flux cleaned = -0.00479719 Jy ! Component: 3550 - total flux cleaned = -0.0048199 Jy ! Component: 3600 - total flux cleaned = -0.00484256 Jy ! Component: 3650 - total flux cleaned = -0.00482009 Jy ! Component: 3700 - total flux cleaned = -0.00491024 Jy ! Component: 3750 - total flux cleaned = -0.00495529 Jy ! Component: 3800 - total flux cleaned = -0.00502238 Jy ! Component: 3850 - total flux cleaned = -0.00499993 Jy ! Component: 3900 - total flux cleaned = -0.00504443 Jy ! Component: 3950 - total flux cleaned = -0.00506664 Jy ! Component: 4000 - total flux cleaned = -0.00511092 Jy ! Component: 4050 - total flux cleaned = -0.00513309 Jy ! Total flux subtracted in 4096 components = -0.0051773 Jy ! Clean residual min=-0.001102 max=0.001225 Jy/beam ! Clean residual mean=0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0837011 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 364 components and 0.0837011 Jy ![Exited script file: muppet] wmap "J0327+0233_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.281 at 0.7976 degrees (North through East) ! Clean map min=-0.0040817 max=0.094979 Jy/beam ! Writing clean map to FITS file: J0327+0233_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0949792 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000419015 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.32349 1.32349 2.64699 5.29398 10.588 21.1759 42.3518 84.7036 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.281 at 0.7976 degrees (North through East) ! Clean map min=-0.0040817 max=0.094979 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0327+0233_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:15:45 2019