! Started logfile: J0326-3243_S_2017_10_21_pus_uvs.log on Sat May 11 20:49:08 2019 obs J0326-3243_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0326-3243_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.52188 visibilities/baseline/integration-bin. ! Found source: J0326-3243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0326-3243_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 454 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 394 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 897 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991033Jy sigma=0.007204 ! Fit after self-cal, rms=0.937743Jy sigma=0.006871 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=21.34 mas, bpa=-11.18 degrees ! Estimated noise=1849.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495271 Jy ! Component: 100 - total flux cleaned = 0.0610701 Jy ! Total flux subtracted in 100 components = 0.0610701 Jy ! Clean residual min=-0.005713 max=0.006268 Jy/beam ! Clean residual mean=-0.000080 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.0610701 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0610701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105680Jy sigma=0.000661 ! Fit after self-cal, rms=0.105018Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=21.79 mas, bpa=-10.38 degrees ! Estimated noise=1133.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712329 Jy ! Component: 100 - total flux cleaned = 0.00994096 Jy ! Component: 150 - total flux cleaned = 0.0103133 Jy ! Component: 200 - total flux cleaned = 0.01044 Jy ! Total flux subtracted in 200 components = 0.01044 Jy ! Clean residual min=-0.003899 max=0.005670 Jy/beam ! Clean residual mean=-0.000125 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.0715101 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.0715101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104427Jy sigma=0.000654 ! Fit after self-cal, rms=0.104346Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.95 KP 1.10 ! LA 1.01 MK 1.16 NL 1.00* OV 1.08 ! PT 0.87 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.90 KP 1.06 ! LA 0.98 MK 1.17 NL 0.99 OV 1.04 ! PT 0.85 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.96 KP 1.11 ! LA 0.77 MK 1.06 NL 1.23 OV 1.01 ! PT 0.77 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.78 KP 1.00* ! LA 0.74 MK 0.80 NL 1.00* OV 1.00* ! PT 0.82 ! ! ! Fit before self-cal, rms=0.104346Jy sigma=0.000653 ! Fit after self-cal, rms=0.099598Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=21.39 mas, bpa=-10.02 degrees ! Estimated noise=1143.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012362 Jy ! Component: 100 - total flux cleaned = 0.000370171 Jy ! Component: 150 - total flux cleaned = 0.000373191 Jy ! Component: 200 - total flux cleaned = 0.000293204 Jy ! Total flux subtracted in 200 components = 0.000293204 Jy ! Clean residual min=-0.002921 max=0.002954 Jy/beam ! Clean residual mean=-0.000031 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0718033 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.0718033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099541Jy sigma=0.000652 ! Fit after self-cal, rms=0.099526Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099526Jy sigma=0.000650 ! Fit after self-cal, rms=0.100796Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=21.53 mas, bpa=-9.942 degrees ! Estimated noise=1144.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116355 Jy ! Component: 100 - total flux cleaned = -0.000197676 Jy ! Component: 150 - total flux cleaned = -0.000293355 Jy ! Component: 200 - total flux cleaned = -0.000320435 Jy ! Total flux subtracted in 200 components = -0.000320435 Jy ! Clean residual min=-0.002964 max=0.002774 Jy/beam ! Clean residual mean=-0.000011 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0714829 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.0714829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100759Jy sigma=0.000649 ! Fit after self-cal, rms=0.100942Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.9237e-05 Jy ! Component: 100 - total flux cleaned = -0.000180234 Jy ! Component: 150 - total flux cleaned = -0.000215397 Jy ! Component: 200 - total flux cleaned = -0.000244457 Jy ! Total flux subtracted in 200 components = -0.000244457 Jy ! Clean residual min=-0.003164 max=0.002633 Jy/beam ! Clean residual mean=-0.000020 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0712384 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0712384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100901Jy sigma=0.000649 ! Fit after self-cal, rms=0.100893Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100893Jy sigma=0.000649 ! Fit after self-cal, rms=0.101741Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=21.54 mas, bpa=-9.914 degrees ! Estimated noise=1143.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.28606e-07 Jy ! Component: 100 - total flux cleaned = -0.000138254 Jy ! Component: 150 - total flux cleaned = -0.000194446 Jy ! Component: 200 - total flux cleaned = -0.00019543 Jy ! Total flux subtracted in 200 components = -0.00019543 Jy ! Clean residual min=-0.002991 max=0.003046 Jy/beam ! Clean residual mean=-0.000006 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.071043 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 0.071043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101709Jy sigma=0.000648 ! Fit after self-cal, rms=0.101875Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115634 Jy ! Component: 100 - total flux cleaned = 8.04911e-05 Jy ! Component: 150 - total flux cleaned = 5.27524e-05 Jy ! Component: 200 - total flux cleaned = 3.02875e-05 Jy ! Total flux subtracted in 200 components = 3.02875e-05 Jy ! Clean residual min=-0.003015 max=0.002864 Jy/beam ! Clean residual mean=-0.000009 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0710733 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.0710733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101847Jy sigma=0.000648 ! Fit after self-cal, rms=0.101851Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101851Jy sigma=0.000648 ! Fit after self-cal, rms=0.102532Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.343 mas, bmaj=34.97 mas, bpa=0.2262 degrees ! Estimated noise=1309.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106483 Jy ! Component: 100 - total flux cleaned = 0.000161703 Jy ! Component: 150 - total flux cleaned = 0.000226629 Jy ! Component: 200 - total flux cleaned = 0.000269738 Jy ! Total flux subtracted in 200 components = 0.000269738 Jy ! Clean residual min=-0.002668 max=0.002890 Jy/beam ! Clean residual mean=-0.000005 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.071343 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.071343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102524Jy sigma=0.000648 ! Fit after self-cal, rms=0.102644Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.88837e-05 Jy ! Component: 100 - total flux cleaned = 8.73917e-05 Jy ! Component: 150 - total flux cleaned = 0.000146063 Jy ! Component: 200 - total flux cleaned = 0.000198209 Jy ! Total flux subtracted in 200 components = 0.000198209 Jy ! Clean residual min=-0.002686 max=0.002753 Jy/beam ! Clean residual mean=-0.000008 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0715412 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.0715412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102635Jy sigma=0.000648 ! Fit after self-cal, rms=0.102688Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=21.56 mas, bpa=-9.91 degrees ! Estimated noise=1145.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 21.56 at -9.91 degrees (North through East) ! Clean map min=-0.0064284 max=0.065331 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=20.85 mas, bpa=-10.97 degrees ! Estimated noise=1843.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499385 Jy ! Component: 100 - total flux cleaned = 0.0634099 Jy ! Component: 150 - total flux cleaned = 0.0697815 Jy ! Component: 200 - total flux cleaned = 0.0706021 Jy ! Total flux subtracted in 200 components = 0.0706021 Jy ! Clean residual min=-0.004353 max=0.003916 Jy/beam ! Clean residual mean=-0.000006 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.0706021 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0706021 Jy ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=21.56 mas, bpa=-9.91 degrees ! Estimated noise=1145.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169644 Jy ! Component: 100 - total flux cleaned = 0.00178932 Jy ! Component: 150 - total flux cleaned = 0.0017171 Jy ! Component: 200 - total flux cleaned = 0.00165256 Jy ! Total flux subtracted in 200 components = 0.00165256 Jy ! Clean residual min=-0.002805 max=0.003000 Jy/beam ! Clean residual mean=-0.000000 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0722547 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.0722547 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.343 mas, bmaj=34.97 mas, bpa=0.2262 degrees ! Estimated noise=1309.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329349 Jy ! Component: 100 - total flux cleaned = 0.000210648 Jy ! Component: 150 - total flux cleaned = 0.000110477 Jy ! Component: 200 - total flux cleaned = 4.40091e-05 Jy ! Total flux subtracted in 200 components = 4.40091e-05 Jy ! Clean residual min=-0.002614 max=0.002835 Jy/beam ! Clean residual mean=-0.000000 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0722987 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.79755e-05 Jy ! Component: 100 - total flux cleaned = -7.08484e-05 Jy ! Component: 150 - total flux cleaned = -8.57879e-05 Jy ! Component: 200 - total flux cleaned = -0.000112297 Jy ! Total flux subtracted in 200 components = -0.000112297 Jy ! Clean residual min=-0.002612 max=0.002858 Jy/beam ! Clean residual mean=-0.000001 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0721864 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.0721864 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=21.56 mas, bpa=-9.91 degrees ! Estimated noise=1145.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00026518 Jy ! Component: 100 - total flux cleaned = -0.000379237 Jy ! Component: 150 - total flux cleaned = -0.000411842 Jy ! Component: 200 - total flux cleaned = -0.000411786 Jy ! Total flux subtracted in 200 components = -0.000411786 Jy ! Clean residual min=-0.002831 max=0.003071 Jy/beam ! Clean residual mean=-0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0717746 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.0717746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102676Jy sigma=0.000648 ! Fit after self-cal, rms=0.102711Jy sigma=0.000648 wmodel J0326-3243_S_2017_10_21_pus_map.mod ! Writing 74 model components to file: J0326-3243_S_2017_10_21_pus_map.mod wobs J0326-3243_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0326-3243_S_2017_10_21_pus_uvs.fits wwins J0326-3243_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0326-3243_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149901 Jy ! Component: 100 - total flux cleaned = -0.00041247 Jy ! Component: 150 - total flux cleaned = -0.000819034 Jy ! Component: 200 - total flux cleaned = -0.000933588 Jy ! Component: 250 - total flux cleaned = -0.000794972 Jy ! Component: 300 - total flux cleaned = -0.000600179 Jy ! Component: 350 - total flux cleaned = -0.000444993 Jy ! Component: 400 - total flux cleaned = -0.000325753 Jy ! Component: 450 - total flux cleaned = -0.000240201 Jy ! Component: 500 - total flux cleaned = -0.00018537 Jy ! Component: 550 - total flux cleaned = -7.9969e-05 Jy ! Component: 600 - total flux cleaned = -3.80744e-06 Jy ! Component: 650 - total flux cleaned = -2.83581e-05 Jy ! Component: 700 - total flux cleaned = -3.80305e-06 Jy ! Component: 750 - total flux cleaned = -3.23192e-06 Jy ! Component: 800 - total flux cleaned = 0.00013092 Jy ! Component: 850 - total flux cleaned = 0.000152958 Jy ! Component: 900 - total flux cleaned = 0.000280663 Jy ! Component: 950 - total flux cleaned = 0.000404869 Jy ! Component: 1000 - total flux cleaned = 0.00054621 Jy ! Component: 1050 - total flux cleaned = 0.000605494 Jy ! Component: 1100 - total flux cleaned = 0.000741821 Jy ! Component: 1150 - total flux cleaned = 0.000799063 Jy ! Component: 1200 - total flux cleaned = 0.000836491 Jy ! Component: 1250 - total flux cleaned = 0.000854753 Jy ! Component: 1300 - total flux cleaned = 0.000800021 Jy ! Component: 1350 - total flux cleaned = 0.000836028 Jy ! Component: 1400 - total flux cleaned = 0.000836138 Jy ! Component: 1450 - total flux cleaned = 0.000836264 Jy ! Component: 1500 - total flux cleaned = 0.000801438 Jy ! Component: 1550 - total flux cleaned = 0.000750423 Jy ! Component: 1600 - total flux cleaned = 0.000699962 Jy ! Component: 1650 - total flux cleaned = 0.000666743 Jy ! Component: 1700 - total flux cleaned = 0.000617295 Jy ! Component: 1750 - total flux cleaned = 0.000601028 Jy ! Component: 1800 - total flux cleaned = 0.000536141 Jy ! Component: 1850 - total flux cleaned = 0.000552301 Jy ! Component: 1900 - total flux cleaned = 0.000536274 Jy ! Component: 1950 - total flux cleaned = 0.00052039 Jy ! Component: 2000 - total flux cleaned = 0.000520338 Jy ! Component: 2050 - total flux cleaned = 0.000536154 Jy ! Component: 2100 - total flux cleaned = 0.000583495 Jy ! Component: 2150 - total flux cleaned = 0.000599237 Jy ! Component: 2200 - total flux cleaned = 0.000583533 Jy ! Component: 2250 - total flux cleaned = 0.000630585 Jy ! Component: 2300 - total flux cleaned = 0.000630657 Jy ! Component: 2350 - total flux cleaned = 0.000677436 Jy ! Component: 2400 - total flux cleaned = 0.000708472 Jy ! Component: 2450 - total flux cleaned = 0.000755061 Jy ! Component: 2500 - total flux cleaned = 0.000785818 Jy ! Component: 2550 - total flux cleaned = 0.00078575 Jy ! Component: 2600 - total flux cleaned = 0.000832045 Jy ! Component: 2650 - total flux cleaned = 0.000862807 Jy ! Component: 2700 - total flux cleaned = 0.000893514 Jy ! Component: 2750 - total flux cleaned = 0.00087806 Jy ! Component: 2800 - total flux cleaned = 0.000939704 Jy ! Component: 2850 - total flux cleaned = 0.000939688 Jy ! Component: 2900 - total flux cleaned = 0.000955071 Jy ! Component: 2950 - total flux cleaned = 0.000986218 Jy ! Component: 3000 - total flux cleaned = 0.000986186 Jy ! Component: 3050 - total flux cleaned = 0.00101768 Jy ! Component: 3100 - total flux cleaned = 0.00104933 Jy ! Component: 3150 - total flux cleaned = 0.00108116 Jy ! Component: 3200 - total flux cleaned = 0.00112909 Jy ! Component: 3250 - total flux cleaned = 0.0011613 Jy ! Component: 3300 - total flux cleaned = 0.00119377 Jy ! Component: 3350 - total flux cleaned = 0.00125908 Jy ! Component: 3400 - total flux cleaned = 0.00125905 Jy ! Component: 3450 - total flux cleaned = 0.00129216 Jy ! Component: 3500 - total flux cleaned = 0.00130881 Jy ! Component: 3550 - total flux cleaned = 0.00134234 Jy ! Component: 3600 - total flux cleaned = 0.00134246 Jy ! Component: 3650 - total flux cleaned = 0.00135968 Jy ! Component: 3700 - total flux cleaned = 0.00141128 Jy ! Component: 3750 - total flux cleaned = 0.00141127 Jy ! Component: 3800 - total flux cleaned = 0.00146389 Jy ! Component: 3850 - total flux cleaned = 0.00148172 Jy ! Component: 3900 - total flux cleaned = 0.00149959 Jy ! Component: 3950 - total flux cleaned = 0.00151757 Jy ! Component: 4000 - total flux cleaned = 0.00157204 Jy ! Component: 4050 - total flux cleaned = 0.00162718 Jy ! Total flux subtracted in 4096 components = 0.00166431 Jy ! Clean residual min=-0.001060 max=0.001099 Jy/beam ! Clean residual mean=0.000008 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0734389 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 296 components and 0.073439 Jy ![Exited script file: muppet] wmap "J0326-3243_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 21.56 at -9.91 degrees (North through East) ! Clean map min=-0.0046396 max=0.064827 Jy/beam ! Writing clean map to FITS file: J0326-3243_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0648273 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319526 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47866 1.47866 2.95732 5.91465 11.8293 23.6586 47.3172 94.6344 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 21.56 at -9.91 degrees (North through East) ! Clean map min=-0.0046396 max=0.064827 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0326-3243_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:13 2019