! Started logfile: J0326-3243_S_2017_06_10_pus_uvs.log on Mon May 6 14:43:53 2019 obs J0326-3243_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0326-3243_S_2017_06_10_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.602874 visibilities/baseline/integration-bin. ! Found source: J0326-3243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 12588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0326-3243_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 410 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 545 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 543 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 870 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997482Jy sigma=0.007301 ! Fit after self-cal, rms=0.944913Jy sigma=0.006921 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=6.442 mas, bpa=-3.186 degrees ! Estimated noise=1852.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440978 Jy ! Component: 100 - total flux cleaned = 0.0542004 Jy ! Total flux subtracted in 100 components = 0.0542004 Jy ! Clean residual min=-0.004140 max=0.005394 Jy/beam ! Clean residual mean=-0.000016 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0542004 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0542004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093590Jy sigma=0.000659 ! Fit after self-cal, rms=0.092277Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.075 mas, bpa=-1.369 degrees ! Estimated noise=1216.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00758482 Jy ! Component: 100 - total flux cleaned = 0.0108408 Jy ! Component: 150 - total flux cleaned = 0.0123501 Jy ! Component: 200 - total flux cleaned = 0.0130514 Jy ! Total flux subtracted in 200 components = 0.0130514 Jy ! Clean residual min=-0.003384 max=0.004109 Jy/beam ! Clean residual mean=-0.000051 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0672518 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.0672518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091721Jy sigma=0.000645 ! Fit after self-cal, rms=0.091691Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00* KP 0.93 ! LA 0.96 MK 1.07 NL 1.00* OV 1.04 ! PT 1.12 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.03 ! LA 0.90 MK 1.05 NL 0.96 OV 1.15 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.98 ! LA 0.99 MK 1.05 NL 1.03 OV 0.95 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.00* ! LA 0.63 MK 0.98 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.091691Jy sigma=0.000644 ! Fit after self-cal, rms=0.093000Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.037 mas, bpa=-0.8828 degrees ! Estimated noise=1248.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84336e-05 Jy ! Component: 100 - total flux cleaned = 5.02378e-05 Jy ! Component: 150 - total flux cleaned = 4.94295e-05 Jy ! Component: 200 - total flux cleaned = 6.42197e-05 Jy ! Total flux subtracted in 200 components = 6.42197e-05 Jy ! Clean residual min=-0.003069 max=0.003621 Jy/beam ! Clean residual mean=-0.000048 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.067316 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.067316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092991Jy sigma=0.000646 ! Fit after self-cal, rms=0.093035Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093035Jy sigma=0.000645 ! Fit after self-cal, rms=0.093715Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.025 mas, bpa=-0.8032 degrees ! Estimated noise=1253.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311988 Jy ! Component: 100 - total flux cleaned = 0.000312643 Jy ! Component: 150 - total flux cleaned = 0.000313056 Jy ! Component: 200 - total flux cleaned = 0.000312625 Jy ! Total flux subtracted in 200 components = 0.000312625 Jy ! Clean residual min=-0.002801 max=0.003253 Jy/beam ! Clean residual mean=-0.000039 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0676286 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0676286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093709Jy sigma=0.000644 ! Fit after self-cal, rms=0.093793Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145355 Jy ! Component: 100 - total flux cleaned = 0.000129754 Jy ! Component: 150 - total flux cleaned = 0.000115985 Jy ! Component: 200 - total flux cleaned = 0.000103654 Jy ! Total flux subtracted in 200 components = 0.000103654 Jy ! Clean residual min=-0.002810 max=0.003139 Jy/beam ! Clean residual mean=-0.000040 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.0677323 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.0677323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093788Jy sigma=0.000644 ! Fit after self-cal, rms=0.093793Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093793Jy sigma=0.000644 ! Fit after self-cal, rms=0.094810Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=8.003 mas, bpa=-0.8385 degrees ! Estimated noise=1258.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295049 Jy ! Component: 100 - total flux cleaned = 0.000294351 Jy ! Component: 150 - total flux cleaned = 0.000294311 Jy ! Component: 200 - total flux cleaned = 0.00028224 Jy ! Total flux subtracted in 200 components = 0.00028224 Jy ! Clean residual min=-0.002808 max=0.003227 Jy/beam ! Clean residual mean=-0.000034 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0680145 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0680145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094803Jy sigma=0.000644 ! Fit after self-cal, rms=0.094874Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229855 Jy ! Component: 100 - total flux cleaned = 0.000229856 Jy ! Component: 150 - total flux cleaned = 0.000216374 Jy ! Component: 200 - total flux cleaned = 0.000203959 Jy ! Total flux subtracted in 200 components = 0.000203959 Jy ! Clean residual min=-0.002757 max=0.003223 Jy/beam ! Clean residual mean=-0.000034 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.0682185 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.0682185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094869Jy sigma=0.000643 ! Fit after self-cal, rms=0.094878Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094878Jy sigma=0.000643 ! Fit after self-cal, rms=0.095612Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.889 mas, bmaj=26.16 mas, bpa=3.666 degrees ! Estimated noise=1554.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407671 Jy ! Component: 100 - total flux cleaned = 0.000408017 Jy ! Component: 150 - total flux cleaned = 0.000408529 Jy ! Component: 200 - total flux cleaned = 0.00040902 Jy ! Total flux subtracted in 200 components = 0.00040902 Jy ! Clean residual min=-0.003295 max=0.003214 Jy/beam ! Clean residual mean=-0.000061 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.0686275 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 51 components and 0.0686275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095614Jy sigma=0.000643 ! Fit after self-cal, rms=0.095658Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.07816e-05 Jy ! Component: 100 - total flux cleaned = 2.07583e-05 Jy ! Component: 150 - total flux cleaned = 2.03888e-05 Jy ! Component: 200 - total flux cleaned = 1.99861e-05 Jy ! Total flux subtracted in 200 components = 1.99861e-05 Jy ! Clean residual min=-0.003312 max=0.003177 Jy/beam ! Clean residual mean=-0.000061 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.0686475 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 52 components and 0.0686475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095660Jy sigma=0.000643 ! Fit after self-cal, rms=0.095665Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.995 mas, bpa=-0.9095 degrees ! Estimated noise=1263.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.995 at -0.9095 degrees (North through East) ! Clean map min=-0.0027236 max=0.05752 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.522 mas, bmaj=6.385 mas, bpa=-2.813 degrees ! Estimated noise=1939.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466246 Jy ! Component: 100 - total flux cleaned = 0.0583924 Jy ! Component: 150 - total flux cleaned = 0.0636578 Jy ! Component: 200 - total flux cleaned = 0.0664106 Jy ! Total flux subtracted in 200 components = 0.0664106 Jy ! Clean residual min=-0.004127 max=0.004224 Jy/beam ! Clean residual mean=-0.000022 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.0664106 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0664106 Jy ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.995 mas, bpa=-0.9095 degrees ! Estimated noise=1263.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142686 Jy ! Component: 100 - total flux cleaned = 0.00153516 Jy ! Component: 150 - total flux cleaned = 0.00160614 Jy ! Component: 200 - total flux cleaned = 0.00164845 Jy ! Total flux subtracted in 200 components = 0.00164845 Jy ! Clean residual min=-0.002794 max=0.003349 Jy/beam ! Clean residual mean=-0.000035 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.0680591 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 23 components and 0.0680591 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.889 mas, bmaj=26.16 mas, bpa=3.666 degrees ! Estimated noise=1554.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324607 Jy ! Component: 100 - total flux cleaned = 0.000323466 Jy ! Component: 150 - total flux cleaned = 0.000322773 Jy ! Component: 200 - total flux cleaned = 0.00032282 Jy ! Total flux subtracted in 200 components = 0.00032282 Jy ! Clean residual min=-0.003330 max=0.003145 Jy/beam ! Clean residual mean=-0.000062 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.0683819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12816e-05 Jy ! Component: 100 - total flux cleaned = 2.17436e-05 Jy ! Component: 150 - total flux cleaned = 3.12897e-05 Jy ! Component: 200 - total flux cleaned = 4.06124e-05 Jy ! Total flux subtracted in 200 components = 4.06124e-05 Jy ! Clean residual min=-0.003313 max=0.003159 Jy/beam ! Clean residual mean=-0.000062 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.0684225 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0684225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.995 mas, bpa=-0.9095 degrees ! Estimated noise=1263.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219484 Jy ! Component: 100 - total flux cleaned = -0.000202204 Jy ! Component: 150 - total flux cleaned = -0.000186912 Jy ! Component: 200 - total flux cleaned = -0.000186599 Jy ! Total flux subtracted in 200 components = -0.000186599 Jy ! Clean residual min=-0.002775 max=0.003299 Jy/beam ! Clean residual mean=-0.000034 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.0682359 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0682359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095666Jy sigma=0.000643 ! Fit after self-cal, rms=0.095649Jy sigma=0.000643 wmodel J0326-3243_S_2017_06_10_pus_map.mod ! Writing 34 model components to file: J0326-3243_S_2017_06_10_pus_map.mod wobs J0326-3243_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0326-3243_S_2017_06_10_pus_uvs.fits wwins J0326-3243_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0326-3243_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122656 Jy ! Component: 100 - total flux cleaned = 0.00163851 Jy ! Component: 150 - total flux cleaned = 0.00183354 Jy ! Component: 200 - total flux cleaned = 0.00183513 Jy ! Component: 250 - total flux cleaned = 0.00152594 Jy ! Component: 300 - total flux cleaned = 0.00105588 Jy ! Component: 350 - total flux cleaned = 0.000683175 Jy ! Component: 400 - total flux cleaned = 0.000202177 Jy ! Component: 450 - total flux cleaned = -0.000108686 Jy ! Component: 500 - total flux cleaned = -0.00044756 Jy ! Component: 550 - total flux cleaned = -0.000667258 Jy ! Component: 600 - total flux cleaned = -0.000810291 Jy ! Component: 650 - total flux cleaned = -0.00108684 Jy ! Component: 700 - total flux cleaned = -0.00122094 Jy ! Component: 750 - total flux cleaned = -0.00135111 Jy ! Component: 800 - total flux cleaned = -0.00138341 Jy ! Component: 850 - total flux cleaned = -0.00150771 Jy ! Component: 900 - total flux cleaned = -0.00144583 Jy ! Component: 950 - total flux cleaned = -0.00141659 Jy ! Component: 1000 - total flux cleaned = -0.00138711 Jy ! Component: 1050 - total flux cleaned = -0.00141613 Jy ! Component: 1100 - total flux cleaned = -0.001445 Jy ! Component: 1150 - total flux cleaned = -0.00152753 Jy ! Component: 1200 - total flux cleaned = -0.0015812 Jy ! Component: 1250 - total flux cleaned = -0.00171385 Jy ! Component: 1300 - total flux cleaned = -0.00171441 Jy ! Component: 1350 - total flux cleaned = -0.00181682 Jy ! Component: 1400 - total flux cleaned = -0.00189215 Jy ! Component: 1450 - total flux cleaned = -0.00201542 Jy ! Component: 1500 - total flux cleaned = -0.00213647 Jy ! Component: 1550 - total flux cleaned = -0.00227919 Jy ! Component: 1600 - total flux cleaned = -0.00237273 Jy ! Component: 1650 - total flux cleaned = -0.00241864 Jy ! Component: 1700 - total flux cleaned = -0.00248725 Jy ! Component: 1750 - total flux cleaned = -0.00259952 Jy ! Component: 1800 - total flux cleaned = -0.00270935 Jy ! Component: 1850 - total flux cleaned = -0.00275265 Jy ! Component: 1900 - total flux cleaned = -0.00285995 Jy ! Component: 1950 - total flux cleaned = -0.0029652 Jy ! Component: 2000 - total flux cleaned = -0.00300652 Jy ! Component: 2050 - total flux cleaned = -0.00308874 Jy ! Component: 2100 - total flux cleaned = -0.00321065 Jy ! Component: 2150 - total flux cleaned = -0.00329097 Jy ! Component: 2200 - total flux cleaned = -0.00340957 Jy ! Component: 2250 - total flux cleaned = -0.00348744 Jy ! Component: 2300 - total flux cleaned = -0.00354559 Jy ! Component: 2350 - total flux cleaned = -0.00362223 Jy ! Component: 2400 - total flux cleaned = -0.00367888 Jy ! Component: 2450 - total flux cleaned = -0.00373493 Jy ! Component: 2500 - total flux cleaned = -0.00375346 Jy ! Component: 2550 - total flux cleaned = -0.00384509 Jy ! Component: 2600 - total flux cleaned = -0.0038994 Jy ! Component: 2650 - total flux cleaned = -0.00395314 Jy ! Component: 2700 - total flux cleaned = -0.00400632 Jy ! Component: 2750 - total flux cleaned = -0.00407698 Jy ! Component: 2800 - total flux cleaned = -0.00412955 Jy ! Component: 2850 - total flux cleaned = -0.00416409 Jy ! Component: 2900 - total flux cleaned = -0.00423275 Jy ! Component: 2950 - total flux cleaned = -0.0043178 Jy ! Component: 3000 - total flux cleaned = -0.00438542 Jy ! Component: 3050 - total flux cleaned = -0.00445223 Jy ! Component: 3100 - total flux cleaned = -0.00453517 Jy ! Component: 3150 - total flux cleaned = -0.00458442 Jy ! Component: 3200 - total flux cleaned = -0.00466623 Jy ! Component: 3250 - total flux cleaned = -0.0047959 Jy ! Component: 3300 - total flux cleaned = -0.00489247 Jy ! Component: 3350 - total flux cleaned = -0.00500447 Jy ! Component: 3400 - total flux cleaned = -0.00511583 Jy ! Component: 3450 - total flux cleaned = -0.00524224 Jy ! Component: 3500 - total flux cleaned = -0.00535194 Jy ! Component: 3550 - total flux cleaned = -0.00549223 Jy ! Component: 3600 - total flux cleaned = -0.00560062 Jy ! Component: 3650 - total flux cleaned = -0.00567772 Jy ! Component: 3700 - total flux cleaned = -0.00581558 Jy ! Component: 3750 - total flux cleaned = -0.00593733 Jy ! Component: 3800 - total flux cleaned = -0.00608858 Jy ! Component: 3850 - total flux cleaned = -0.00617878 Jy ! Component: 3900 - total flux cleaned = -0.00631341 Jy ! Component: 3950 - total flux cleaned = -0.00641754 Jy ! Component: 4000 - total flux cleaned = -0.00649153 Jy ! Component: 4050 - total flux cleaned = -0.00660958 Jy ! Total flux subtracted in 4096 components = -0.00669757 Jy ! Clean residual min=-0.000845 max=0.000732 Jy/beam ! Clean residual mean=-0.000009 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0615383 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 287 components and 0.0615383 Jy ![Exited script file: muppet] wmap "J0326-3243_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.995 at -0.9095 degrees (North through East) ! Clean map min=-0.0025342 max=0.058179 Jy/beam ! Writing clean map to FITS file: J0326-3243_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0581785 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249436 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28623 1.28623 2.57246 5.14491 10.2898 20.5796 41.1593 82.3186 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.995 at -0.9095 degrees (North through East) ! Clean map min=-0.0025342 max=0.058179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0326-3243_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:43:58 2019