! Started logfile: J0324-2254_S_2017_02_19_pus_uvs.log on Sat May 4 18:40:33 2019 obs J0324-2254_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0324-2254_S_2017_02_19_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780556 visibilities/baseline/integration-bin. ! Found source: J0324-2254 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 13488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0324-2254_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917745Jy sigma=0.006064 ! Fit after self-cal, rms=0.903232Jy sigma=0.005977 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=6.384 mas, bpa=-5.683 degrees ! Estimated noise=1529.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0780561 Jy ! Component: 100 - total flux cleaned = 0.0953514 Jy ! Total flux subtracted in 100 components = 0.0953514 Jy ! Clean residual min=-0.004515 max=0.005780 Jy/beam ! Clean residual mean=0.000003 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.0953514 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0953514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109553Jy sigma=0.000668 ! Fit after self-cal, rms=0.109516Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=7.299 mas, bpa=-4.415 degrees ! Estimated noise=1017.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767477 Jy ! Component: 100 - total flux cleaned = 0.0111952 Jy ! Component: 150 - total flux cleaned = 0.0132165 Jy ! Component: 200 - total flux cleaned = 0.0144592 Jy ! Total flux subtracted in 200 components = 0.0144592 Jy ! Clean residual min=-0.003146 max=0.003327 Jy/beam ! Clean residual mean=0.000003 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.109811 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.109811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108917Jy sigma=0.000665 ! Fit after self-cal, rms=0.108874Jy sigma=0.000665 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.14 KP 1.04 ! LA 1.05 MK 0.96 NL 0.89 OV 1.04 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.05 KP 1.01 ! LA 0.99 MK 0.97 NL 1.00 OV 1.10 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.09 KP 0.88 ! LA 0.85 MK 0.99 NL 1.15 OV 0.94 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.98 KP 1.00* ! LA 0.76 MK 1.16 NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.108874Jy sigma=0.000665 ! Fit after self-cal, rms=0.106588Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.32 mas, bpa=-4.309 degrees ! Estimated noise=1015.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024559 Jy ! Component: 100 - total flux cleaned = 0.000245855 Jy ! Component: 150 - total flux cleaned = 0.000224592 Jy ! Component: 200 - total flux cleaned = 0.000224721 Jy ! Total flux subtracted in 200 components = 0.000224721 Jy ! Clean residual min=-0.002690 max=0.003124 Jy/beam ! Clean residual mean=0.000004 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.110035 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.110035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106580Jy sigma=0.000662 ! Fit after self-cal, rms=0.106563Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106563Jy sigma=0.000661 ! Fit after self-cal, rms=0.106645Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.33 mas, bpa=-4.299 degrees ! Estimated noise=1016.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129109 Jy ! Component: 100 - total flux cleaned = 0.000129417 Jy ! Component: 150 - total flux cleaned = 0.00012924 Jy ! Component: 200 - total flux cleaned = 0.000128575 Jy ! Total flux subtracted in 200 components = 0.000128575 Jy ! Clean residual min=-0.002576 max=0.002905 Jy/beam ! Clean residual mean=0.000002 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.110164 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.110164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106639Jy sigma=0.000661 ! Fit after self-cal, rms=0.106647Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276059 Jy ! Component: 100 - total flux cleaned = 0.00432578 Jy ! Component: 150 - total flux cleaned = 0.00504326 Jy ! Component: 200 - total flux cleaned = 0.00530066 Jy ! Total flux subtracted in 200 components = 0.00530066 Jy ! Clean residual min=-0.002641 max=0.002182 Jy/beam ! Clean residual mean=0.000000 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.115465 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.115465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106572Jy sigma=0.000660 ! Fit after self-cal, rms=0.106560Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106560Jy sigma=0.000660 ! Fit after self-cal, rms=0.106342Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.327 mas, bpa=-4.323 degrees ! Estimated noise=1014.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126961 Jy ! Component: 100 - total flux cleaned = 0.00185079 Jy ! Component: 150 - total flux cleaned = 0.00204908 Jy ! Component: 200 - total flux cleaned = 0.00215429 Jy ! Total flux subtracted in 200 components = 0.00215429 Jy ! Clean residual min=-0.002515 max=0.002083 Jy/beam ! Clean residual mean=0.000000 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.117619 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.117619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106324Jy sigma=0.000660 ! Fit after self-cal, rms=0.106322Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445413 Jy ! Component: 100 - total flux cleaned = 0.000504659 Jy ! Component: 150 - total flux cleaned = 0.000558591 Jy ! Component: 200 - total flux cleaned = 0.000608846 Jy ! Total flux subtracted in 200 components = 0.000608846 Jy ! Clean residual min=-0.002473 max=0.002088 Jy/beam ! Clean residual mean=-0.000000 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.118228 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.118228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106316Jy sigma=0.000660 ! Fit after self-cal, rms=0.106314Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106314Jy sigma=0.000660 ! Fit after self-cal, rms=0.106428Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.01 mas, bmaj=15.38 mas, bpa=3.585 degrees ! Estimated noise=1373.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978574 Jy ! Component: 100 - total flux cleaned = 0.0014074 Jy ! Component: 150 - total flux cleaned = 0.00149139 Jy ! Component: 200 - total flux cleaned = 0.0015467 Jy ! Total flux subtracted in 200 components = 0.0015467 Jy ! Clean residual min=-0.002528 max=0.002066 Jy/beam ! Clean residual mean=0.000000 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.119774 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 84 components and 0.119774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106430Jy sigma=0.000660 ! Fit after self-cal, rms=0.106426Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277288 Jy ! Component: 100 - total flux cleaned = 0.000328287 Jy ! Component: 150 - total flux cleaned = 0.000373426 Jy ! Component: 200 - total flux cleaned = 0.00039427 Jy ! Total flux subtracted in 200 components = 0.00039427 Jy ! Clean residual min=-0.002506 max=0.002019 Jy/beam ! Clean residual mean=0.000000 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.120169 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 88 components and 0.120169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106428Jy sigma=0.000660 ! Fit after self-cal, rms=0.106428Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.324 mas, bpa=-4.36 degrees ! Estimated noise=1014.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.832 x 7.324 at -4.36 degrees (North through East) ! Clean map min=-0.0023433 max=0.099533 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.356 mas, bmaj=6.4 mas, bpa=-5.318 degrees ! Estimated noise=1535.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0781331 Jy ! Component: 100 - total flux cleaned = 0.095396 Jy ! Component: 150 - total flux cleaned = 0.101666 Jy ! Component: 200 - total flux cleaned = 0.105529 Jy ! Total flux subtracted in 200 components = 0.105529 Jy ! Clean residual min=-0.003602 max=0.003512 Jy/beam ! Clean residual mean=0.000003 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.105529 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.105529 Jy ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.324 mas, bpa=-4.36 degrees ! Estimated noise=1014.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394523 Jy ! Component: 100 - total flux cleaned = 0.0065774 Jy ! Component: 150 - total flux cleaned = 0.0085011 Jy ! Component: 200 - total flux cleaned = 0.00998253 Jy ! Total flux subtracted in 200 components = 0.00998253 Jy ! Clean residual min=-0.002572 max=0.002042 Jy/beam ! Clean residual mean=0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.115512 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 0.115512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.01 mas, bmaj=15.38 mas, bpa=3.585 degrees ! Estimated noise=1373.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180324 Jy ! Component: 100 - total flux cleaned = 0.00294443 Jy ! Component: 150 - total flux cleaned = 0.00372984 Jy ! Component: 200 - total flux cleaned = 0.00412316 Jy ! Total flux subtracted in 200 components = 0.00412316 Jy ! Clean residual min=-0.002512 max=0.002051 Jy/beam ! Clean residual mean=0.000001 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.119635 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264469 Jy ! Component: 100 - total flux cleaned = 0.000408549 Jy ! Component: 150 - total flux cleaned = 0.000482023 Jy ! Component: 200 - total flux cleaned = 0.000536193 Jy ! Total flux subtracted in 200 components = 0.000536193 Jy ! Clean residual min=-0.002472 max=0.002014 Jy/beam ! Clean residual mean=0.000001 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.120171 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 98 components and 0.120171 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.324 mas, bpa=-4.36 degrees ! Estimated noise=1014.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044312 Jy ! Component: 100 - total flux cleaned = -0.000478803 Jy ! Component: 150 - total flux cleaned = -0.000481116 Jy ! Component: 200 - total flux cleaned = -0.000396664 Jy ! Total flux subtracted in 200 components = -0.000396664 Jy ! Clean residual min=-0.002449 max=0.002043 Jy/beam ! Clean residual mean=0.000000 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.119774 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.119774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106425Jy sigma=0.000660 ! Fit after self-cal, rms=0.106423Jy sigma=0.000660 wmodel J0324-2254_S_2017_02_19_pus_map.mod ! Writing 112 model components to file: J0324-2254_S_2017_02_19_pus_map.mod wobs J0324-2254_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0324-2254_S_2017_02_19_pus_uvs.fits wwins J0324-2254_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J0324-2254_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108677 Jy ! Component: 100 - total flux cleaned = -0.00155717 Jy ! Component: 150 - total flux cleaned = -0.00203704 Jy ! Component: 200 - total flux cleaned = -0.00232145 Jy ! Component: 250 - total flux cleaned = -0.00242442 Jy ! Component: 300 - total flux cleaned = -0.00255734 Jy ! Component: 350 - total flux cleaned = -0.00268489 Jy ! Component: 400 - total flux cleaned = -0.00280786 Jy ! Component: 450 - total flux cleaned = -0.00274706 Jy ! Component: 500 - total flux cleaned = -0.00277648 Jy ! Component: 550 - total flux cleaned = -0.00266134 Jy ! Component: 600 - total flux cleaned = -0.00268967 Jy ! Component: 650 - total flux cleaned = -0.00266171 Jy ! Component: 700 - total flux cleaned = -0.00260732 Jy ! Component: 750 - total flux cleaned = -0.00260685 Jy ! Component: 800 - total flux cleaned = -0.0025543 Jy ! Component: 850 - total flux cleaned = -0.00260544 Jy ! Component: 900 - total flux cleaned = -0.00252968 Jy ! Component: 950 - total flux cleaned = -0.00255447 Jy ! Component: 1000 - total flux cleaned = -0.00253022 Jy ! Component: 1050 - total flux cleaned = -0.00253007 Jy ! Component: 1100 - total flux cleaned = -0.0024825 Jy ! Component: 1150 - total flux cleaned = -0.0024596 Jy ! Component: 1200 - total flux cleaned = -0.00243649 Jy ! Component: 1250 - total flux cleaned = -0.00243618 Jy ! Component: 1300 - total flux cleaned = -0.00241366 Jy ! Component: 1350 - total flux cleaned = -0.00241384 Jy ! Component: 1400 - total flux cleaned = -0.00250049 Jy ! Component: 1450 - total flux cleaned = -0.00241535 Jy ! Component: 1500 - total flux cleaned = -0.00241568 Jy ! Component: 1550 - total flux cleaned = -0.00247783 Jy ! Component: 1600 - total flux cleaned = -0.00243669 Jy ! Component: 1650 - total flux cleaned = -0.00243635 Jy ! Component: 1700 - total flux cleaned = -0.00241629 Jy ! Component: 1750 - total flux cleaned = -0.00237707 Jy ! Component: 1800 - total flux cleaned = -0.00243545 Jy ! Component: 1850 - total flux cleaned = -0.00245454 Jy ! Component: 1900 - total flux cleaned = -0.00243544 Jy ! Component: 1950 - total flux cleaned = -0.00243529 Jy ! Component: 2000 - total flux cleaned = -0.00239832 Jy ! Component: 2050 - total flux cleaned = -0.00241687 Jy ! Component: 2100 - total flux cleaned = -0.00245332 Jy ! Component: 2150 - total flux cleaned = -0.00247097 Jy ! Component: 2200 - total flux cleaned = -0.00250635 Jy ! Component: 2250 - total flux cleaned = -0.00247147 Jy ! Component: 2300 - total flux cleaned = -0.00243692 Jy ! Component: 2350 - total flux cleaned = -0.00245407 Jy ! Component: 2400 - total flux cleaned = -0.00248787 Jy ! Component: 2450 - total flux cleaned = -0.00248808 Jy ! Component: 2500 - total flux cleaned = -0.00255396 Jy ! Component: 2550 - total flux cleaned = -0.00252136 Jy ! Component: 2600 - total flux cleaned = -0.00261831 Jy ! Component: 2650 - total flux cleaned = -0.00255432 Jy ! Component: 2700 - total flux cleaned = -0.00263346 Jy ! Component: 2750 - total flux cleaned = -0.00269604 Jy ! Component: 2800 - total flux cleaned = -0.00272702 Jy ! Component: 2850 - total flux cleaned = -0.0026962 Jy ! Component: 2900 - total flux cleaned = -0.00280306 Jy ! Component: 2950 - total flux cleaned = -0.00284837 Jy ! Component: 3000 - total flux cleaned = -0.00290817 Jy ! Component: 3050 - total flux cleaned = -0.00296758 Jy ! Component: 3100 - total flux cleaned = -0.00296758 Jy ! Component: 3150 - total flux cleaned = -0.00306977 Jy ! Component: 3200 - total flux cleaned = -0.00306996 Jy ! Component: 3250 - total flux cleaned = -0.00312749 Jy ! Component: 3300 - total flux cleaned = -0.00315587 Jy ! Component: 3350 - total flux cleaned = -0.00318425 Jy ! Component: 3400 - total flux cleaned = -0.00324037 Jy ! Component: 3450 - total flux cleaned = -0.00325428 Jy ! Component: 3500 - total flux cleaned = -0.0033648 Jy ! Component: 3550 - total flux cleaned = -0.00339211 Jy ! Component: 3600 - total flux cleaned = -0.00339212 Jy ! Component: 3650 - total flux cleaned = -0.00344613 Jy ! Component: 3700 - total flux cleaned = -0.0034864 Jy ! Component: 3750 - total flux cleaned = -0.0035794 Jy ! Component: 3800 - total flux cleaned = -0.00356626 Jy ! Component: 3850 - total flux cleaned = -0.00367118 Jy ! Component: 3900 - total flux cleaned = -0.00372317 Jy ! Component: 3950 - total flux cleaned = -0.00373607 Jy ! Component: 4000 - total flux cleaned = -0.00383888 Jy ! Component: 4050 - total flux cleaned = -0.00385156 Jy ! Total flux subtracted in 4096 components = -0.00390227 Jy ! Clean residual min=-0.001063 max=0.000864 Jy/beam ! Clean residual mean=0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.115872 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 420 components and 0.115872 Jy ![Exited script file: muppet] wmap "J0324-2254_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.832 x 7.324 at -4.36 degrees (North through East) ! Clean map min=-0.0015325 max=0.09994 Jy/beam ! Writing clean map to FITS file: J0324-2254_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0999398 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221957 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.666273 0.666273 1.33255 2.66509 5.33019 10.6604 21.3207 42.6415 85.283 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.832 x 7.324 at -4.36 degrees (North through East) ! Clean map min=-0.0015325 max=0.09994 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0324-2254_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:40:38 2019