! Started logfile: J0323+0145_S_2017_04_28_pus_uvs.log on Thu May 2 16:15:28 2019 obs J0323+0145_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0323+0145_S_2017_04_28_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95775 visibilities/baseline/integration-bin. ! Found source: J0323+0145 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0323+0145_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 345 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.607861Jy sigma=0.025086 ! Fit after self-cal, rms=0.607419Jy sigma=0.025062 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=6.722 mas, bpa=-6.382 degrees ! Estimated noise=763.201 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224536 Jy ! Component: 100 - total flux cleaned = 0.317057 Jy ! Total flux subtracted in 100 components = 0.317057 Jy ! Clean residual min=-0.071050 max=0.072682 Jy/beam ! Clean residual mean=-0.000000 rms=0.022628 Jy/beam ! Combined flux in latest and established models = 0.317057 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.317057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333532Jy sigma=0.004704 ! Fit after self-cal, rms=0.332708Jy sigma=0.004704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=7.139 mas, bpa=-4.165 degrees ! Estimated noise=702.874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0821002 Jy ! Component: 100 - total flux cleaned = 0.13075 Jy ! Component: 150 - total flux cleaned = 0.16273 Jy ! Component: 200 - total flux cleaned = 0.184093 Jy ! Total flux subtracted in 200 components = 0.184093 Jy ! Clean residual min=-0.055700 max=0.058686 Jy/beam ! Clean residual mean=0.000004 rms=0.017983 Jy/beam ! Combined flux in latest and established models = 0.50115 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.50115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291648Jy sigma=0.005074 ! Fit after self-cal, rms=0.291086Jy sigma=0.005074 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.88 HN 0.95 KP 0.96 ! LA 1.01 MK 1.04 NL 0.97 OV 0.96 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.79 HN 0.99 KP 0.92 ! LA 0.99 MK 0.95 NL 1.16 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.83 HN 0.96 KP 0.96 ! LA 0.98 MK 0.97 NL 1.06 OV 0.90 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 34.87 FD 0.85 HN 1.07 KP 1.00* ! LA 0.73 MK 1.06 NL 1.00* OV 1.00* ! PT 1.14 SC 1.00* ! ! ! Fit before self-cal, rms=0.291086Jy sigma=0.005074 ! Fit after self-cal, rms=3.641941Jy sigma=0.001103 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=7.554 mas, bpa=-2.392 degrees ! Estimated noise=824.088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0180733 Jy ! Component: 100 - total flux cleaned = -0.0243111 Jy ! Component: 150 - total flux cleaned = -0.028229 Jy ! Component: 200 - total flux cleaned = -0.0305658 Jy ! Total flux subtracted in 200 components = -0.0305658 Jy ! Clean residual min=-0.016733 max=0.016796 Jy/beam ! Clean residual mean=-0.000042 rms=0.003258 Jy/beam ! Combined flux in latest and established models = 0.470584 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.470584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.631223Jy sigma=0.000973 ! Fit after self-cal, rms=3.630995Jy sigma=0.000949 ! Inverting map ! Added new window around map position (-4.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465667 Jy ! Component: 100 - total flux cleaned = 0.00519488 Jy ! Component: 150 - total flux cleaned = 0.00565326 Jy ! Component: 200 - total flux cleaned = 0.0068916 Jy ! Total flux subtracted in 200 components = 0.0068916 Jy ! Clean residual min=-0.012300 max=0.012236 Jy/beam ! Clean residual mean=-0.000037 rms=0.003018 Jy/beam ! Combined flux in latest and established models = 0.477476 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.477476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.627812Jy sigma=0.000932 ! Fit after self-cal, rms=3.627806Jy sigma=0.000932 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.627806Jy sigma=0.000932 ! Fit after self-cal, rms=6.175544Jy sigma=0.000870 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=7.623 mas, bpa=-2.994 degrees ! Estimated noise=844.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00070809 Jy ! Component: 100 - total flux cleaned = -0.00122066 Jy ! Component: 150 - total flux cleaned = -0.0016425 Jy ! Component: 200 - total flux cleaned = -0.0016326 Jy ! Total flux subtracted in 200 components = -0.0016326 Jy ! Clean residual min=-0.008666 max=0.008720 Jy/beam ! Clean residual mean=-0.000008 rms=0.002237 Jy/beam ! Combined flux in latest and established models = 0.475843 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.475843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.170563Jy sigma=0.000857 ! Fit after self-cal, rms=6.170561Jy sigma=0.000857 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360468 Jy ! Component: 100 - total flux cleaned = 0.000369561 Jy ! Component: 150 - total flux cleaned = 0.000149309 Jy ! Component: 200 - total flux cleaned = -3.6548e-05 Jy ! Total flux subtracted in 200 components = -3.6548e-05 Jy ! Clean residual min=-0.007717 max=0.008674 Jy/beam ! Clean residual mean=-0.000010 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.475807 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.475807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.168589Jy sigma=0.000859 ! Fit after self-cal, rms=6.168584Jy sigma=0.000859 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.168584Jy sigma=0.000859 ! Fit after self-cal, rms=0.104830Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.632 mas, bpa=-3.402 degrees ! Estimated noise=838.962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461713 Jy ! Component: 100 - total flux cleaned = -0.00161769 Jy ! Component: 150 - total flux cleaned = -0.00229949 Jy ! Component: 200 - total flux cleaned = -0.0029035 Jy ! Total flux subtracted in 200 components = -0.0029035 Jy ! Clean residual min=-0.003663 max=0.003124 Jy/beam ! Clean residual mean=-0.000005 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.472903 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.472903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104639Jy sigma=0.000689 ! Fit after self-cal, rms=0.104373Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267877 Jy ! Component: 100 - total flux cleaned = -0.000525255 Jy ! Component: 150 - total flux cleaned = -0.000581721 Jy ! Component: 200 - total flux cleaned = -0.000692735 Jy ! Total flux subtracted in 200 components = -0.000692735 Jy ! Clean residual min=-0.003310 max=0.003040 Jy/beam ! Clean residual mean=-0.000005 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.47221 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.47221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104305Jy sigma=0.000687 ! Fit after self-cal, rms=0.104304Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104304Jy sigma=0.000687 ! Fit after self-cal, rms=0.104170Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.468 mas, bmaj=11.58 mas, bpa=2.636 degrees ! Estimated noise=1072.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000825841 Jy ! Component: 100 - total flux cleaned = -0.00110082 Jy ! Component: 150 - total flux cleaned = -0.00136624 Jy ! Component: 200 - total flux cleaned = -0.00153713 Jy ! Total flux subtracted in 200 components = -0.00153713 Jy ! Clean residual min=-0.003012 max=0.002889 Jy/beam ! Clean residual mean=-0.000010 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.470673 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.470673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104143Jy sigma=0.000687 ! Fit after self-cal, rms=0.104139Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195342 Jy ! Component: 100 - total flux cleaned = -0.000390298 Jy ! Component: 150 - total flux cleaned = -0.000538125 Jy ! Component: 200 - total flux cleaned = -0.00063266 Jy ! Total flux subtracted in 200 components = -0.00063266 Jy ! Clean residual min=-0.003027 max=0.002902 Jy/beam ! Clean residual mean=-0.000010 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.470041 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.470041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104125Jy sigma=0.000687 ! Fit after self-cal, rms=0.104125Jy sigma=0.000687 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=7.63 mas, bpa=-3.396 degrees ! Estimated noise=837.565 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 7.63 at -3.396 degrees (North through East) ! Clean map min=-0.0029776 max=0.37684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.016 mas, bpa=-5.216 degrees ! Estimated noise=1013.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.295519 Jy ! Component: 100 - total flux cleaned = 0.370803 Jy ! Component: 150 - total flux cleaned = 0.403939 Jy ! Component: 200 - total flux cleaned = 0.422547 Jy ! Total flux subtracted in 200 components = 0.422547 Jy ! Clean residual min=-0.007178 max=0.009517 Jy/beam ! Clean residual mean=-0.000011 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.422547 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.422547 Jy ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=7.63 mas, bpa=-3.396 degrees ! Estimated noise=837.565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015099 Jy ! Component: 100 - total flux cleaned = 0.024669 Jy ! Component: 150 - total flux cleaned = 0.031254 Jy ! Component: 200 - total flux cleaned = 0.0359383 Jy ! Total flux subtracted in 200 components = 0.0359383 Jy ! Clean residual min=-0.004723 max=0.004791 Jy/beam ! Clean residual mean=-0.000010 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.458485 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.458485 Jy ! Inverting map ! Added new window around map position (4, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445419 Jy ! Component: 100 - total flux cleaned = 0.00623475 Jy ! Component: 150 - total flux cleaned = 0.00778537 Jy ! Component: 200 - total flux cleaned = 0.00884317 Jy ! Total flux subtracted in 200 components = 0.00884317 Jy ! Clean residual min=-0.003881 max=0.002458 Jy/beam ! Clean residual mean=-0.000006 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.467328 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.467328 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.468 mas, bmaj=11.58 mas, bpa=2.636 degrees ! Estimated noise=1072.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123123 Jy ! Component: 100 - total flux cleaned = 0.0012827 Jy ! Component: 150 - total flux cleaned = 0.00132344 Jy ! Component: 200 - total flux cleaned = 0.00132648 Jy ! Total flux subtracted in 200 components = 0.00132648 Jy ! Clean residual min=-0.003024 max=0.002901 Jy/beam ! Clean residual mean=-0.000011 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.468655 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55753e-05 Jy ! Component: 100 - total flux cleaned = -4.75167e-05 Jy ! Component: 150 - total flux cleaned = -6.59209e-05 Jy ! Component: 200 - total flux cleaned = -6.52652e-05 Jy ! Total flux subtracted in 200 components = -6.52652e-05 Jy ! Clean residual min=-0.003015 max=0.002855 Jy/beam ! Clean residual mean=-0.000012 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.46859 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 115 components and 0.46859 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=7.63 mas, bpa=-3.396 degrees ! Estimated noise=837.565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208166 Jy ! Component: 100 - total flux cleaned = -0.000209173 Jy ! Component: 150 - total flux cleaned = -0.000161098 Jy ! Component: 200 - total flux cleaned = -0.000160874 Jy ! Total flux subtracted in 200 components = -0.000160874 Jy ! Clean residual min=-0.003367 max=0.002476 Jy/beam ! Clean residual mean=-0.000006 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.468429 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 143 components and 0.468429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104083Jy sigma=0.000686 ! Fit after self-cal, rms=0.104078Jy sigma=0.000686 wmodel J0323+0145_S_2017_04_28_pus_map.mod ! Writing 143 model components to file: J0323+0145_S_2017_04_28_pus_map.mod wobs J0323+0145_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0323+0145_S_2017_04_28_pus_uvs.fits wwins J0323+0145_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0323+0145_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118284 Jy ! Component: 100 - total flux cleaned = -0.00105436 Jy ! Component: 150 - total flux cleaned = -0.000773005 Jy ! Component: 200 - total flux cleaned = -0.000504381 Jy ! Component: 250 - total flux cleaned = -0.000208584 Jy ! Component: 300 - total flux cleaned = 0.000112119 Jy ! Component: 350 - total flux cleaned = 0.000388029 Jy ! Component: 400 - total flux cleaned = 0.000622385 Jy ! Component: 450 - total flux cleaned = 0.000950283 Jy ! Component: 500 - total flux cleaned = 0.00120705 Jy ! Component: 550 - total flux cleaned = 0.00149006 Jy ! Component: 600 - total flux cleaned = 0.00164354 Jy ! Component: 650 - total flux cleaned = 0.00188473 Jy ! Component: 700 - total flux cleaned = 0.00206179 Jy ! Component: 750 - total flux cleaned = 0.00220762 Jy ! Component: 800 - total flux cleaned = 0.00240835 Jy ! Component: 850 - total flux cleaned = 0.00257774 Jy ! Component: 900 - total flux cleaned = 0.00271622 Jy ! Component: 950 - total flux cleaned = 0.00287992 Jy ! Component: 1000 - total flux cleaned = 0.00309473 Jy ! Component: 1050 - total flux cleaned = 0.00322684 Jy ! Component: 1100 - total flux cleaned = 0.00338359 Jy ! Component: 1150 - total flux cleaned = 0.00361417 Jy ! Component: 1200 - total flux cleaned = 0.00366475 Jy ! Component: 1250 - total flux cleaned = 0.00388979 Jy ! Component: 1300 - total flux cleaned = 0.00406245 Jy ! Component: 1350 - total flux cleaned = 0.00420831 Jy ! Component: 1400 - total flux cleaned = 0.00435242 Jy ! Component: 1450 - total flux cleaned = 0.00447141 Jy ! Component: 1500 - total flux cleaned = 0.00458863 Jy ! Component: 1550 - total flux cleaned = 0.00470475 Jy ! Component: 1600 - total flux cleaned = 0.00488823 Jy ! Component: 1650 - total flux cleaned = 0.00495612 Jy ! Component: 1700 - total flux cleaned = 0.00500119 Jy ! Component: 1750 - total flux cleaned = 0.00520063 Jy ! Component: 1800 - total flux cleaned = 0.00522201 Jy ! Component: 1850 - total flux cleaned = 0.00524352 Jy ! Component: 1900 - total flux cleaned = 0.00545896 Jy ! Component: 1950 - total flux cleaned = 0.00548001 Jy ! Component: 2000 - total flux cleaned = 0.00550125 Jy ! Component: 2050 - total flux cleaned = 0.00554333 Jy ! Component: 2100 - total flux cleaned = 0.00558484 Jy ! Component: 2150 - total flux cleaned = 0.00560502 Jy ! Component: 2200 - total flux cleaned = 0.0055438 Jy ! Component: 2250 - total flux cleaned = 0.00554317 Jy ! Component: 2300 - total flux cleaned = 0.00540298 Jy ! Component: 2350 - total flux cleaned = 0.00532367 Jy ! Component: 2400 - total flux cleaned = 0.00532357 Jy ! Component: 2450 - total flux cleaned = 0.0051864 Jy ! Component: 2500 - total flux cleaned = 0.00512813 Jy ! Component: 2550 - total flux cleaned = 0.00503179 Jy ! Component: 2600 - total flux cleaned = 0.00499358 Jy ! Component: 2650 - total flux cleaned = 0.00495569 Jy ! Component: 2700 - total flux cleaned = 0.00486173 Jy ! Component: 2750 - total flux cleaned = 0.00480582 Jy ! Component: 2800 - total flux cleaned = 0.00478709 Jy ! Component: 2850 - total flux cleaned = 0.00478682 Jy ! Component: 2900 - total flux cleaned = 0.00471339 Jy ! Component: 2950 - total flux cleaned = 0.00464103 Jy ! Component: 3000 - total flux cleaned = 0.00460477 Jy ! Component: 3050 - total flux cleaned = 0.00458652 Jy ! Component: 3100 - total flux cleaned = 0.00453322 Jy ! Component: 3150 - total flux cleaned = 0.00449765 Jy ! Component: 3200 - total flux cleaned = 0.00449779 Jy ! Component: 3250 - total flux cleaned = 0.00446283 Jy ! Component: 3300 - total flux cleaned = 0.00439363 Jy ! Component: 3350 - total flux cleaned = 0.00435915 Jy ! Component: 3400 - total flux cleaned = 0.00439361 Jy ! Component: 3450 - total flux cleaned = 0.0044107 Jy ! Component: 3500 - total flux cleaned = 0.00441051 Jy ! Component: 3550 - total flux cleaned = 0.00436012 Jy ! Component: 3600 - total flux cleaned = 0.00431001 Jy ! Component: 3650 - total flux cleaned = 0.00427682 Jy ! Component: 3700 - total flux cleaned = 0.00432638 Jy ! Component: 3750 - total flux cleaned = 0.00437553 Jy ! Component: 3800 - total flux cleaned = 0.00431007 Jy ! Component: 3850 - total flux cleaned = 0.00429394 Jy ! Component: 3900 - total flux cleaned = 0.00427782 Jy ! Component: 3950 - total flux cleaned = 0.00427784 Jy ! Component: 4000 - total flux cleaned = 0.00429377 Jy ! Component: 4050 - total flux cleaned = 0.00434138 Jy ! Total flux subtracted in 4096 components = 0.00432569 Jy ! Clean residual min=-0.000949 max=0.001010 Jy/beam ! Clean residual mean=-0.000002 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.472754 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 464 components and 0.472754 Jy ![Exited script file: muppet] wmap "J0323+0145_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 7.63 at -3.396 degrees (North through East) ! Clean map min=-0.0025248 max=0.38424 Jy/beam ! Writing clean map to FITS file: J0323+0145_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.384236 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292527 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.228396 0.228396 0.456793 0.913586 1.82717 3.65434 7.30869 14.6174 29.2347 58.4695 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.384 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 7.63 at -3.396 degrees (North through East) ! Clean map min=-0.0025248 max=0.38424 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0323+0145_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:15:33 2019