! Started logfile: J0322-1312_S_2017_08_12_pus_uvs.log on Fri May 10 14:51:34 2019 obs J0322-1312_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0322-1312_S_2017_08_12_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.603259 visibilities/baseline/integration-bin. ! Found source: J0322-1312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 8144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0322-1312_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999733Jy sigma=0.008458 ! Fit after self-cal, rms=0.949590Jy sigma=0.008047 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=6.648 mas, bpa=-6.319 degrees ! Estimated noise=1403.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421308 Jy ! Component: 100 - total flux cleaned = 0.0513361 Jy ! Total flux subtracted in 100 components = 0.0513361 Jy ! Clean residual min=-0.003885 max=0.004701 Jy/beam ! Clean residual mean=-0.000000 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.0513361 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0513361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080654Jy sigma=0.000659 ! Fit after self-cal, rms=0.079043Jy sigma=0.000646 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.493 mas, bpa=-6.091 degrees ! Estimated noise=1062.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386977 Jy ! Component: 100 - total flux cleaned = 0.00550287 Jy ! Component: 150 - total flux cleaned = 0.0064487 Jy ! Component: 200 - total flux cleaned = 0.00665516 Jy ! Total flux subtracted in 200 components = 0.00665516 Jy ! Clean residual min=-0.002812 max=0.002952 Jy/beam ! Clean residual mean=0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0579913 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0579913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078852Jy sigma=0.000645 ! Fit after self-cal, rms=0.078858Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 0.96 ! LA 1.02 MK 1.05 NL 0.95 OV 1.03 ! PT 1.09 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.09 KP 0.95 ! LA 0.95 MK 1.04 NL 1.06 OV 1.05 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.00 ! LA 0.95 MK 1.01 NL 0.96 OV 0.93 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.078858Jy sigma=0.000645 ! Fit after self-cal, rms=0.078901Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.512 mas, bpa=-4.935 degrees ! Estimated noise=1082.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237322 Jy ! Component: 100 - total flux cleaned = 0.000287812 Jy ! Component: 150 - total flux cleaned = 0.000260869 Jy ! Component: 200 - total flux cleaned = 0.00024873 Jy ! Total flux subtracted in 200 components = 0.00024873 Jy ! Clean residual min=-0.002917 max=0.002723 Jy/beam ! Clean residual mean=0.000001 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.05824 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.05824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078895Jy sigma=0.000646 ! Fit after self-cal, rms=0.078878Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078878Jy sigma=0.000646 ! Fit after self-cal, rms=0.079158Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.803 mas, bmaj=7.504 mas, bpa=-4.867 degrees ! Estimated noise=1081.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025164 Jy ! Component: 100 - total flux cleaned = 0.000252395 Jy ! Component: 150 - total flux cleaned = 0.000264743 Jy ! Component: 200 - total flux cleaned = 0.000276351 Jy ! Total flux subtracted in 200 components = 0.000276351 Jy ! Clean residual min=-0.002875 max=0.002610 Jy/beam ! Clean residual mean=-0.000000 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0585163 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0585164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079154Jy sigma=0.000645 ! Fit after self-cal, rms=0.079196Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.11495e-05 Jy ! Component: 100 - total flux cleaned = 9.22727e-05 Jy ! Component: 150 - total flux cleaned = 9.24287e-05 Jy ! Component: 200 - total flux cleaned = 0.000102389 Jy ! Total flux subtracted in 200 components = 0.000102389 Jy ! Clean residual min=-0.002855 max=0.002577 Jy/beam ! Clean residual mean=-0.000000 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0586187 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0586187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079194Jy sigma=0.000645 ! Fit after self-cal, rms=0.079193Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079193Jy sigma=0.000645 ! Fit after self-cal, rms=0.079282Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=7.492 mas, bpa=-4.885 degrees ! Estimated noise=1079.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189692 Jy ! Component: 100 - total flux cleaned = 0.000223864 Jy ! Component: 150 - total flux cleaned = 0.000234211 Jy ! Component: 200 - total flux cleaned = 0.000244107 Jy ! Total flux subtracted in 200 components = 0.000244107 Jy ! Clean residual min=-0.002851 max=0.002590 Jy/beam ! Clean residual mean=-0.000001 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0588628 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0588629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079279Jy sigma=0.000645 ! Fit after self-cal, rms=0.079291Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.93643e-05 Jy ! Component: 100 - total flux cleaned = 8.79705e-05 Jy ! Component: 150 - total flux cleaned = 9.63301e-05 Jy ! Component: 200 - total flux cleaned = 0.000112573 Jy ! Total flux subtracted in 200 components = 0.000112573 Jy ! Clean residual min=-0.002828 max=0.002609 Jy/beam ! Clean residual mean=0.000000 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0589754 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0589754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079289Jy sigma=0.000645 ! Fit after self-cal, rms=0.079288Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079288Jy sigma=0.000645 ! Fit after self-cal, rms=0.079239Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.674 mas, bmaj=15.47 mas, bpa=-5.776 degrees ! Estimated noise=1484.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591823 Jy ! Component: 100 - total flux cleaned = 0.000591205 Jy ! Component: 150 - total flux cleaned = 0.000581741 Jy ! Component: 200 - total flux cleaned = 0.000581671 Jy ! Total flux subtracted in 200 components = 0.000581671 Jy ! Clean residual min=-0.002562 max=0.002971 Jy/beam ! Clean residual mean=0.000002 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0595571 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.0595571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079241Jy sigma=0.000645 ! Fit after self-cal, rms=0.079239Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.55611e-05 Jy ! Component: 100 - total flux cleaned = 4.50144e-05 Jy ! Component: 150 - total flux cleaned = 4.52376e-05 Jy ! Component: 200 - total flux cleaned = 4.48327e-05 Jy ! Total flux subtracted in 200 components = 4.48327e-05 Jy ! Clean residual min=-0.002568 max=0.002960 Jy/beam ! Clean residual mean=0.000002 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0596019 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0596019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079241Jy sigma=0.000645 ! Fit after self-cal, rms=0.079236Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.481 mas, bpa=-4.914 degrees ! Estimated noise=1078.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.79 x 7.481 at -4.914 degrees (North through East) ! Clean map min=-0.0026719 max=0.055369 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.372 mas, bmaj=6.582 mas, bpa=-5.169 degrees ! Estimated noise=1439.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433892 Jy ! Component: 100 - total flux cleaned = 0.0529016 Jy ! Component: 150 - total flux cleaned = 0.0561814 Jy ! Component: 200 - total flux cleaned = 0.056826 Jy ! Total flux subtracted in 200 components = 0.056826 Jy ! Clean residual min=-0.003510 max=0.003871 Jy/beam ! Clean residual mean=-0.000001 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.056826 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.056826 Jy ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.481 mas, bpa=-4.914 degrees ! Estimated noise=1078.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-81, -56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233062 Jy ! Component: 100 - total flux cleaned = 0.00256468 Jy ! Component: 150 - total flux cleaned = 0.00279652 Jy ! Component: 200 - total flux cleaned = 0.00291417 Jy ! Total flux subtracted in 200 components = 0.00291417 Jy ! Clean residual min=-0.002588 max=0.002482 Jy/beam ! Clean residual mean=0.000000 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0597401 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.0597401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.674 mas, bmaj=15.47 mas, bpa=-5.776 degrees ! Estimated noise=1484.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645066 Jy ! Component: 100 - total flux cleaned = 0.000688023 Jy ! Component: 150 - total flux cleaned = 0.000659096 Jy ! Component: 200 - total flux cleaned = 0.000618215 Jy ! Total flux subtracted in 200 components = 0.000618215 Jy ! Clean residual min=-0.002415 max=0.003026 Jy/beam ! Clean residual mean=0.000002 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0603583 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.54189e-05 Jy ! Component: 100 - total flux cleaned = -4.87258e-05 Jy ! Component: 150 - total flux cleaned = -5.95866e-05 Jy ! Component: 200 - total flux cleaned = -7.00423e-05 Jy ! Total flux subtracted in 200 components = -7.00423e-05 Jy ! Clean residual min=-0.002399 max=0.003021 Jy/beam ! Clean residual mean=0.000002 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0602883 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.0602883 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.481 mas, bpa=-4.914 degrees ! Estimated noise=1078.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.13823e-05 Jy ! Component: 100 - total flux cleaned = -6.12976e-06 Jy ! Component: 150 - total flux cleaned = -3.06676e-05 Jy ! Component: 200 - total flux cleaned = -3.08584e-05 Jy ! Total flux subtracted in 200 components = -3.08584e-05 Jy ! Clean residual min=-0.002581 max=0.002470 Jy/beam ! Clean residual mean=0.000000 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0602574 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 65 components and 0.0602574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079168Jy sigma=0.000645 ! Fit after self-cal, rms=0.079136Jy sigma=0.000644 wmodel J0322-1312_S_2017_08_12_pus_map.mod ! Writing 65 model components to file: J0322-1312_S_2017_08_12_pus_map.mod wobs J0322-1312_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0322-1312_S_2017_08_12_pus_uvs.fits wwins J0322-1312_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0322-1312_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239134 Jy ! Component: 100 - total flux cleaned = 0.000816038 Jy ! Component: 150 - total flux cleaned = 0.00124308 Jy ! Component: 200 - total flux cleaned = 0.00135349 Jy ! Component: 250 - total flux cleaned = 0.00142448 Jy ! Component: 300 - total flux cleaned = 0.00149342 Jy ! Component: 350 - total flux cleaned = 0.00152599 Jy ! Component: 400 - total flux cleaned = 0.00152692 Jy ! Component: 450 - total flux cleaned = 0.00158789 Jy ! Component: 500 - total flux cleaned = 0.00161736 Jy ! Component: 550 - total flux cleaned = 0.00158904 Jy ! Component: 600 - total flux cleaned = 0.00150647 Jy ! Component: 650 - total flux cleaned = 0.00142561 Jy ! Component: 700 - total flux cleaned = 0.00134742 Jy ! Component: 750 - total flux cleaned = 0.00119577 Jy ! Component: 800 - total flux cleaned = 0.00114641 Jy ! Component: 850 - total flux cleaned = 0.00105038 Jy ! Component: 900 - total flux cleaned = 0.000932611 Jy ! Component: 950 - total flux cleaned = 0.000841389 Jy ! Component: 1000 - total flux cleaned = 0.000728643 Jy ! Component: 1050 - total flux cleaned = 0.000662777 Jy ! Component: 1100 - total flux cleaned = 0.000597693 Jy ! Component: 1150 - total flux cleaned = 0.000575922 Jy ! Component: 1200 - total flux cleaned = 0.000492351 Jy ! Component: 1250 - total flux cleaned = 0.00045148 Jy ! Component: 1300 - total flux cleaned = 0.000450755 Jy ! Component: 1350 - total flux cleaned = 0.000509802 Jy ! Component: 1400 - total flux cleaned = 0.00051001 Jy ! Component: 1450 - total flux cleaned = 0.000547961 Jy ! Component: 1500 - total flux cleaned = 0.000566418 Jy ! Component: 1550 - total flux cleaned = 0.000548096 Jy ! Component: 1600 - total flux cleaned = 0.000530174 Jy ! Component: 1650 - total flux cleaned = 0.000512301 Jy ! Component: 1700 - total flux cleaned = 0.000512053 Jy ! Component: 1750 - total flux cleaned = 0.000494522 Jy ! Component: 1800 - total flux cleaned = 0.000511415 Jy ! Component: 1850 - total flux cleaned = 0.000511192 Jy ! Component: 1900 - total flux cleaned = 0.000527742 Jy ! Component: 1950 - total flux cleaned = 0.000544143 Jy ! Component: 2000 - total flux cleaned = 0.000527637 Jy ! Component: 2050 - total flux cleaned = 0.000543983 Jy ! Component: 2100 - total flux cleaned = 0.000544091 Jy ! Component: 2150 - total flux cleaned = 0.000528421 Jy ! Component: 2200 - total flux cleaned = 0.000466343 Jy ! Component: 2250 - total flux cleaned = 0.000481946 Jy ! Component: 2300 - total flux cleaned = 0.00049728 Jy ! Component: 2350 - total flux cleaned = 0.000436598 Jy ! Component: 2400 - total flux cleaned = 0.000421478 Jy ! Component: 2450 - total flux cleaned = 0.000377265 Jy ! Component: 2500 - total flux cleaned = 0.00037731 Jy ! Component: 2550 - total flux cleaned = 0.000319461 Jy ! Component: 2600 - total flux cleaned = 0.000305142 Jy ! Component: 2650 - total flux cleaned = 0.000290907 Jy ! Component: 2700 - total flux cleaned = 0.000290862 Jy ! Component: 2750 - total flux cleaned = 0.000249069 Jy ! Component: 2800 - total flux cleaned = 0.000249134 Jy ! Component: 2850 - total flux cleaned = 0.000249253 Jy ! Component: 2900 - total flux cleaned = 0.0002628 Jy ! Component: 2950 - total flux cleaned = 0.000249433 Jy ! Component: 3000 - total flux cleaned = 0.000222903 Jy ! Component: 3050 - total flux cleaned = 0.000249396 Jy ! Component: 3100 - total flux cleaned = 0.000236041 Jy ! Component: 3150 - total flux cleaned = 0.000209879 Jy ! Component: 3200 - total flux cleaned = 0.000209938 Jy ! Component: 3250 - total flux cleaned = 0.000184323 Jy ! Component: 3300 - total flux cleaned = 0.000235316 Jy ! Component: 3350 - total flux cleaned = 0.000197255 Jy ! Component: 3400 - total flux cleaned = 0.000209851 Jy ! Component: 3450 - total flux cleaned = 0.000172583 Jy ! Component: 3500 - total flux cleaned = 0.00024706 Jy ! Component: 3550 - total flux cleaned = 0.000234641 Jy ! Component: 3600 - total flux cleaned = 0.000222453 Jy ! Component: 3650 - total flux cleaned = 0.00025901 Jy ! Component: 3700 - total flux cleaned = 0.000283193 Jy ! Component: 3750 - total flux cleaned = 0.00030722 Jy ! Component: 3800 - total flux cleaned = 0.000295303 Jy ! Component: 3850 - total flux cleaned = 0.000319108 Jy ! Component: 3900 - total flux cleaned = 0.000283547 Jy ! Component: 3950 - total flux cleaned = 0.000307146 Jy ! Component: 4000 - total flux cleaned = 0.000272097 Jy ! Component: 4050 - total flux cleaned = 0.000295462 Jy ! Total flux subtracted in 4096 components = 0.00030708 Jy ! Clean residual min=-0.000733 max=0.000649 Jy/beam ! Clean residual mean=-0.000002 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0605645 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 308 components and 0.0605645 Jy ![Exited script file: muppet] wmap "J0322-1312_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.79 x 7.481 at -4.914 degrees (North through East) ! Clean map min=-0.0021419 max=0.055337 Jy/beam ! Writing clean map to FITS file: J0322-1312_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0553365 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185771 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00714 1.00714 2.01427 4.02854 8.05709 16.1142 32.2284 64.4567 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.79 x 7.481 at -4.914 degrees (North through East) ! Clean map min=-0.0021419 max=0.055337 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0322-1312_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:51:38 2019