! Started logfile: J0320-1702_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:34 2019 obs J0320-1702_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0320-1702_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.580479 visibilities/baseline/integration-bin. ! Found source: J0320-1702 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0320-1702_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 453 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 381 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1032 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897799Jy sigma=0.007151 ! Fit after self-cal, rms=0.878587Jy sigma=0.007018 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=18.45 mas, bpa=-13.42 degrees ! Estimated noise=1854.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.089789 Jy ! Component: 100 - total flux cleaned = 0.132702 Jy ! Total flux subtracted in 100 components = 0.132702 Jy ! Clean residual min=-0.021366 max=0.032961 Jy/beam ! Clean residual mean=-0.000387 rms=0.007425 Jy/beam ! Combined flux in latest and established models = 0.132702 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.132702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154190Jy sigma=0.001206 ! Fit after self-cal, rms=0.153636Jy sigma=0.001202 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=21.55 mas, bpa=-13.28 degrees ! Estimated noise=990.397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530016 Jy ! Component: 100 - total flux cleaned = 0.0902036 Jy ! Component: 150 - total flux cleaned = 0.118326 Jy ! Component: 200 - total flux cleaned = 0.139938 Jy ! Total flux subtracted in 200 components = 0.139938 Jy ! Clean residual min=-0.019990 max=0.036049 Jy/beam ! Clean residual mean=-0.000496 rms=0.009520 Jy/beam ! Combined flux in latest and established models = 0.27264 Jy ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 130 components and 0.27264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128884Jy sigma=0.000980 ! Fit after self-cal, rms=0.127679Jy sigma=0.000972 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.64 HN 0.91 KP 1.09 ! LA 0.78 MK 1.46 NL 1.08 OV 1.00* ! PT 0.61 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.49 HN 1.01 KP 1.07 ! LA 0.75 MK 1.39 NL 1.27 OV 1.00* ! PT 0.60 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.55 HN 1.17 KP 0.95 ! LA 0.61 MK 1.19 NL 1.52 OV 1.00* ! PT 0.58 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.45 KP 1.00* ! LA 1.00* MK 0.80 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.127679Jy sigma=0.000972 ! Fit after self-cal, rms=0.121365Jy sigma=0.000746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=22.06 mas, bpa=-12.91 degrees ! Estimated noise=1006.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00481706 Jy ! Component: 100 - total flux cleaned = -0.00440537 Jy ! Component: 150 - total flux cleaned = -0.00404198 Jy ! Component: 200 - total flux cleaned = -0.00356114 Jy ! Total flux subtracted in 200 components = -0.00356114 Jy ! Clean residual min=-0.014383 max=0.015362 Jy/beam ! Clean residual mean=-0.000054 rms=0.004573 Jy/beam ! Combined flux in latest and established models = 0.269079 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 140 components and 0.269079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120385Jy sigma=0.000741 ! Fit after self-cal, rms=0.122769Jy sigma=0.000733 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122769Jy sigma=0.000733 ! Fit after self-cal, rms=0.131487Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=22.51 mas, bpa=-12.93 degrees ! Estimated noise=1006.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032174 Jy ! Component: 100 - total flux cleaned = -0.00322569 Jy ! Component: 150 - total flux cleaned = -0.00308466 Jy ! Component: 200 - total flux cleaned = -0.0030818 Jy ! Total flux subtracted in 200 components = -0.0030818 Jy ! Clean residual min=-0.010752 max=0.012007 Jy/beam ! Clean residual mean=-0.000043 rms=0.003276 Jy/beam ! Combined flux in latest and established models = 0.265997 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 148 components and 0.265998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130895Jy sigma=0.000700 ! Fit after self-cal, rms=0.131228Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044462 Jy ! Component: 100 - total flux cleaned = -0.000452037 Jy ! Component: 150 - total flux cleaned = -0.000450681 Jy ! Component: 200 - total flux cleaned = -0.000448418 Jy ! Total flux subtracted in 200 components = -0.000448418 Jy ! Clean residual min=-0.010782 max=0.012110 Jy/beam ! Clean residual mean=-0.000046 rms=0.003290 Jy/beam ! Combined flux in latest and established models = 0.265549 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 153 components and 0.265549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130887Jy sigma=0.000698 ! Fit after self-cal, rms=0.130873Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130873Jy sigma=0.000698 ! Fit after self-cal, rms=0.133006Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=22.61 mas, bpa=-12.91 degrees ! Estimated noise=1000.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165657 Jy ! Component: 100 - total flux cleaned = -0.001659 Jy ! Component: 150 - total flux cleaned = -0.0016586 Jy ! Component: 200 - total flux cleaned = -0.00165482 Jy ! Total flux subtracted in 200 components = -0.00165482 Jy ! Clean residual min=-0.011001 max=0.011721 Jy/beam ! Clean residual mean=-0.000039 rms=0.003256 Jy/beam ! Combined flux in latest and established models = 0.263894 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 158 components and 0.263894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132702Jy sigma=0.000697 ! Fit after self-cal, rms=0.132747Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138871 Jy ! Component: 100 - total flux cleaned = -5.13679e-05 Jy ! Component: 150 - total flux cleaned = 2.59668e-05 Jy ! Component: 200 - total flux cleaned = 2.51311e-05 Jy ! Total flux subtracted in 200 components = 2.51311e-05 Jy ! Clean residual min=-0.010951 max=0.011707 Jy/beam ! Clean residual mean=-0.000040 rms=0.003251 Jy/beam ! Combined flux in latest and established models = 0.263919 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 167 components and 0.26392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132538Jy sigma=0.000696 ! Fit after self-cal, rms=0.132559Jy sigma=0.000696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132559Jy sigma=0.000696 ! Fit after self-cal, rms=0.134187Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.056 mas, bmaj=24.66 mas, bpa=-6.961 degrees ! Estimated noise=1137.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000619989 Jy ! Component: 100 - total flux cleaned = -0.000621886 Jy ! Component: 150 - total flux cleaned = -0.000726127 Jy ! Component: 200 - total flux cleaned = -0.000728257 Jy ! Total flux subtracted in 200 components = -0.000728257 Jy ! Clean residual min=-0.014637 max=0.015379 Jy/beam ! Clean residual mean=-0.000064 rms=0.004743 Jy/beam ! Combined flux in latest and established models = 0.263191 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 179 components and 0.263191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133965Jy sigma=0.000697 ! Fit after self-cal, rms=0.134046Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018262 Jy ! Component: 100 - total flux cleaned = -0.000180714 Jy ! Component: 150 - total flux cleaned = -0.000178467 Jy ! Component: 200 - total flux cleaned = -0.000176889 Jy ! Total flux subtracted in 200 components = -0.000176889 Jy ! Clean residual min=-0.014328 max=0.015473 Jy/beam ! Clean residual mean=-0.000066 rms=0.004717 Jy/beam ! Combined flux in latest and established models = 0.263014 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 183 components and 0.263014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133905Jy sigma=0.000697 ! Fit after self-cal, rms=0.133947Jy sigma=0.000697 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=22.77 mas, bpa=-12.87 degrees ! Estimated noise=1003.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.522 x 22.77 at -12.87 degrees (North through East) ! Clean map min=-0.01042 max=0.12061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.915 mas, bmaj=19.17 mas, bpa=-13.11 degrees ! Estimated noise=1963.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939316 Jy ! Component: 100 - total flux cleaned = 0.142479 Jy ! Component: 150 - total flux cleaned = 0.173748 Jy ! Component: 200 - total flux cleaned = 0.19647 Jy ! Total flux subtracted in 200 components = 0.19647 Jy ! Clean residual min=-0.014212 max=0.018812 Jy/beam ! Clean residual mean=-0.000144 rms=0.004401 Jy/beam ! Combined flux in latest and established models = 0.19647 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.19647 Jy ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=22.77 mas, bpa=-12.87 degrees ! Estimated noise=1003.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236019 Jy ! Component: 100 - total flux cleaned = 0.0390638 Jy ! Component: 150 - total flux cleaned = 0.0485687 Jy ! Component: 200 - total flux cleaned = 0.0518658 Jy ! Total flux subtracted in 200 components = 0.0518658 Jy ! Clean residual min=-0.012857 max=0.015862 Jy/beam ! Clean residual mean=-0.000090 rms=0.003650 Jy/beam ! Combined flux in latest and established models = 0.248335 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 91 components and 0.248335 Jy ! Inverting map ! Added new window around map position (17, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977584 Jy ! Component: 100 - total flux cleaned = 0.0090246 Jy ! Component: 150 - total flux cleaned = 0.00902246 Jy ! Component: 200 - total flux cleaned = 0.00929281 Jy ! Total flux subtracted in 200 components = 0.00929281 Jy ! Clean residual min=-0.009813 max=0.011039 Jy/beam ! Clean residual mean=-0.000053 rms=0.002939 Jy/beam ! Combined flux in latest and established models = 0.257628 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.257628 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.056 mas, bmaj=24.66 mas, bpa=-6.961 degrees ! Estimated noise=1137.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195919 Jy ! Component: 100 - total flux cleaned = 0.00197027 Jy ! Component: 150 - total flux cleaned = 0.00222922 Jy ! Component: 200 - total flux cleaned = 0.00223571 Jy ! Total flux subtracted in 200 components = 0.00223571 Jy ! Clean residual min=-0.012304 max=0.012928 Jy/beam ! Clean residual mean=-0.000064 rms=0.003917 Jy/beam ! Combined flux in latest and established models = 0.259864 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.10978e-08 Jy ! Component: 100 - total flux cleaned = -0.000200226 Jy ! Component: 150 - total flux cleaned = -0.000202822 Jy ! Component: 200 - total flux cleaned = -0.000204669 Jy ! Total flux subtracted in 200 components = -0.000204669 Jy ! Clean residual min=-0.011640 max=0.012205 Jy/beam ! Clean residual mean=-0.000060 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 0.259659 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 171 components and 0.259659 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=22.77 mas, bpa=-12.87 degrees ! Estimated noise=1003.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032717 Jy ! Component: 100 - total flux cleaned = 0.000122087 Jy ! Component: 150 - total flux cleaned = 0.000119531 Jy ! Component: 200 - total flux cleaned = -0.000324594 Jy ! Total flux subtracted in 200 components = -0.000324594 Jy ! Clean residual min=-0.008723 max=0.009395 Jy/beam ! Clean residual mean=-0.000034 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.259335 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 207 components and 0.259334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129564Jy sigma=0.000682 ! Fit after self-cal, rms=0.128615Jy sigma=0.000677 wmodel J0320-1702_S_2017_10_09_pus_map.mod ! Writing 207 model components to file: J0320-1702_S_2017_10_09_pus_map.mod wobs J0320-1702_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0320-1702_S_2017_10_09_pus_uvs.fits wwins J0320-1702_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0320-1702_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00417865 Jy ! Component: 100 - total flux cleaned = -0.0052039 Jy ! Component: 150 - total flux cleaned = -0.00533813 Jy ! Component: 200 - total flux cleaned = -0.00508408 Jy ! Component: 250 - total flux cleaned = -0.00461628 Jy ! Component: 300 - total flux cleaned = -0.00406622 Jy ! Component: 350 - total flux cleaned = -0.00375255 Jy ! Component: 400 - total flux cleaned = -0.0035539 Jy ! Component: 450 - total flux cleaned = -0.00374596 Jy ! Component: 500 - total flux cleaned = -0.00346245 Jy ! Component: 550 - total flux cleaned = -0.00328263 Jy ! Component: 600 - total flux cleaned = -0.0032835 Jy ! Component: 650 - total flux cleaned = -0.00345511 Jy ! Component: 700 - total flux cleaned = -0.00345668 Jy ! Component: 750 - total flux cleaned = -0.00361748 Jy ! Component: 800 - total flux cleaned = -0.0035404 Jy ! Component: 850 - total flux cleaned = -0.0036171 Jy ! Component: 900 - total flux cleaned = -0.00376555 Jy ! Component: 950 - total flux cleaned = -0.00390859 Jy ! Component: 1000 - total flux cleaned = -0.0040481 Jy ! Component: 1050 - total flux cleaned = -0.00404717 Jy ! Component: 1100 - total flux cleaned = -0.00411524 Jy ! Component: 1150 - total flux cleaned = -0.00417939 Jy ! Component: 1200 - total flux cleaned = -0.00391997 Jy ! Component: 1250 - total flux cleaned = -0.00391916 Jy ! Component: 1300 - total flux cleaned = -0.00373208 Jy ! Component: 1350 - total flux cleaned = -0.00373164 Jy ! Component: 1400 - total flux cleaned = -0.00361296 Jy ! Component: 1450 - total flux cleaned = -0.00361273 Jy ! Component: 1500 - total flux cleaned = -0.00366936 Jy ! Component: 1550 - total flux cleaned = -0.00372443 Jy ! Component: 1600 - total flux cleaned = -0.0037231 Jy ! Component: 1650 - total flux cleaned = -0.00366898 Jy ! Component: 1700 - total flux cleaned = -0.00383003 Jy ! Component: 1750 - total flux cleaned = -0.00377827 Jy ! Component: 1800 - total flux cleaned = -0.00377921 Jy ! Component: 1850 - total flux cleaned = -0.00398358 Jy ! Component: 1900 - total flux cleaned = -0.00393412 Jy ! Component: 1950 - total flux cleaned = -0.00403248 Jy ! Component: 2000 - total flux cleaned = -0.00403224 Jy ! Component: 2050 - total flux cleaned = -0.00393663 Jy ! Component: 2100 - total flux cleaned = -0.00393688 Jy ! Component: 2150 - total flux cleaned = -0.00393693 Jy ! Component: 2200 - total flux cleaned = -0.00393714 Jy ! Component: 2250 - total flux cleaned = -0.00393683 Jy ! Component: 2300 - total flux cleaned = -0.00380386 Jy ! Component: 2350 - total flux cleaned = -0.00375986 Jy ! Component: 2400 - total flux cleaned = -0.00363055 Jy ! Component: 2450 - total flux cleaned = -0.0035881 Jy ! Component: 2500 - total flux cleaned = -0.00337824 Jy ! Component: 2550 - total flux cleaned = -0.00337806 Jy ! Component: 2600 - total flux cleaned = -0.00317249 Jy ! Component: 2650 - total flux cleaned = -0.00309185 Jy ! Component: 2700 - total flux cleaned = -0.0029716 Jy ! Component: 2750 - total flux cleaned = -0.0028926 Jy ! Component: 2800 - total flux cleaned = -0.00277505 Jy ! Component: 2850 - total flux cleaned = -0.00254217 Jy ! Component: 2900 - total flux cleaned = -0.00242747 Jy ! Component: 2950 - total flux cleaned = -0.00238895 Jy ! Component: 3000 - total flux cleaned = -0.00212569 Jy ! Component: 3050 - total flux cleaned = -0.00201384 Jy ! Component: 3100 - total flux cleaned = -0.00186589 Jy ! Component: 3150 - total flux cleaned = -0.00168314 Jy ! Component: 3200 - total flux cleaned = -0.00150234 Jy ! Component: 3250 - total flux cleaned = -0.00135914 Jy ! Component: 3300 - total flux cleaned = -0.0012172 Jy ! Component: 3350 - total flux cleaned = -0.0011116 Jy ! Component: 3400 - total flux cleaned = -0.00100711 Jy ! Component: 3450 - total flux cleaned = -0.000903242 Jy ! Component: 3500 - total flux cleaned = -0.000800285 Jy ! Component: 3550 - total flux cleaned = -0.000731929 Jy ! Component: 3600 - total flux cleaned = -0.000596725 Jy ! Component: 3650 - total flux cleaned = -0.000529311 Jy ! Component: 3700 - total flux cleaned = -0.000296336 Jy ! Component: 3750 - total flux cleaned = -0.000197611 Jy ! Component: 3800 - total flux cleaned = -6.63979e-05 Jy ! Component: 3850 - total flux cleaned = 3.10444e-05 Jy ! Component: 3900 - total flux cleaned = 0.000225163 Jy ! Component: 3950 - total flux cleaned = 0.000417987 Jy ! Component: 4000 - total flux cleaned = 0.000577721 Jy ! Component: 4050 - total flux cleaned = 0.000705093 Jy ! Total flux subtracted in 4096 components = 0.000831835 Jy ! Clean residual min=-0.001643 max=0.001578 Jy/beam ! Clean residual mean=-0.000002 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.260166 Jy keep ! Adding 388 model components to the UV plane model. ! The established model now contains 595 components and 0.260166 Jy ![Exited script file: muppet] wmap "J0320-1702_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.522 x 22.77 at -12.87 degrees (North through East) ! Clean map min=-0.012947 max=0.11928 Jy/beam ! Writing clean map to FITS file: J0320-1702_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119278 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000686783 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72734 1.72734 3.45469 6.90937 13.8187 27.6375 55.275 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.522 x 22.77 at -12.87 degrees (North through East) ! Clean map min=-0.012947 max=0.11928 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0320-1702_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:40 2019