! Started logfile: J0320-1702_S_2017_08_12_pus_uvs.log on Fri May 10 14:51:29 2019 obs J0320-1702_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0320-1702_S_2017_08_12_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781226 visibilities/baseline/integration-bin. ! Found source: J0320-1702 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 16312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0320-1702_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 884 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.908208Jy sigma=0.007052 ! Fit after self-cal, rms=0.894397Jy sigma=0.006954 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.479 mas, bpa=-4.801 degrees ! Estimated noise=1335.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789309 Jy ! Component: 100 - total flux cleaned = 0.113122 Jy ! Total flux subtracted in 100 components = 0.113122 Jy ! Clean residual min=-0.014781 max=0.032612 Jy/beam ! Clean residual mean=-0.000191 rms=0.006151 Jy/beam ! Combined flux in latest and established models = 0.113122 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.113122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138202Jy sigma=0.001117 ! Fit after self-cal, rms=0.137940Jy sigma=0.001115 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.314 mas, bpa=-5.53 degrees ! Estimated noise=867.161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393259 Jy ! Component: 100 - total flux cleaned = 0.0630684 Jy ! Component: 150 - total flux cleaned = 0.0779965 Jy ! Component: 200 - total flux cleaned = 0.0874035 Jy ! Total flux subtracted in 200 components = 0.0874035 Jy ! Clean residual min=-0.019879 max=0.035492 Jy/beam ! Clean residual mean=-0.000350 rms=0.009250 Jy/beam ! Combined flux in latest and established models = 0.200525 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 58 components and 0.200525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126963Jy sigma=0.001013 ! Fit after self-cal, rms=0.126612Jy sigma=0.001009 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.53 FD 1.00* HN 1.49 KP 1.01 ! LA 0.66 MK 1.42 NL 1.11 OV 2.81 ! PT 0.60 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.80 KP 0.98 ! LA 0.65 MK 1.29 NL 1.35 OV 2.66 ! PT 0.58 SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.66 FD 1.00* HN 2.14 KP 0.97 ! LA 0.65 MK 1.35 NL 1.29 OV 2.15 ! PT 0.58 SC 1.04 ! ! ! Correcting IF 4. ! A total of 276 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.126612Jy sigma=0.001009 ! Fit after self-cal, rms=0.207455Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=7.813 mas, bpa=-2.651 degrees ! Estimated noise=1005.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383953 Jy ! Component: 100 - total flux cleaned = 0.00290798 Jy ! Component: 150 - total flux cleaned = 0.00200682 Jy ! Component: 200 - total flux cleaned = 0.00126165 Jy ! Total flux subtracted in 200 components = 0.00126165 Jy ! Clean residual min=-0.015218 max=0.019515 Jy/beam ! Clean residual mean=-0.000119 rms=0.004214 Jy/beam ! Combined flux in latest and established models = 0.201787 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.201787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206219Jy sigma=0.000780 ! Fit after self-cal, rms=0.212321Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212321Jy sigma=0.000765 ! Fit after self-cal, rms=0.306635Jy sigma=0.000737 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=7.841 mas, bpa=-3.298 degrees ! Estimated noise=1082.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350772 Jy ! Component: 100 - total flux cleaned = 0.00290789 Jy ! Component: 150 - total flux cleaned = 0.00232165 Jy ! Component: 200 - total flux cleaned = 0.00171391 Jy ! Total flux subtracted in 200 components = 0.00171391 Jy ! Clean residual min=-0.011842 max=0.016133 Jy/beam ! Clean residual mean=-0.000033 rms=0.003556 Jy/beam ! Combined flux in latest and established models = 0.203501 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.203501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305983Jy sigma=0.000738 ! Fit after self-cal, rms=0.306679Jy sigma=0.000737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (53, -62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105437 Jy ! Component: 100 - total flux cleaned = 0.0123576 Jy ! Component: 150 - total flux cleaned = 0.0131458 Jy ! Component: 200 - total flux cleaned = 0.0133781 Jy ! Total flux subtracted in 200 components = 0.0133781 Jy ! Clean residual min=-0.012398 max=0.014689 Jy/beam ! Clean residual mean=-0.000012 rms=0.003354 Jy/beam ! Combined flux in latest and established models = 0.216879 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.216879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304763Jy sigma=0.000730 ! Fit after self-cal, rms=0.304064Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304064Jy sigma=0.000728 ! Fit after self-cal, rms=0.296234Jy sigma=0.000725 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.83 mas, bpa=-3.997 degrees ! Estimated noise=1086.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794211 Jy ! Component: 100 - total flux cleaned = 0.00923853 Jy ! Component: 150 - total flux cleaned = 0.00943125 Jy ! Component: 200 - total flux cleaned = 0.00942777 Jy ! Total flux subtracted in 200 components = 0.00942777 Jy ! Clean residual min=-0.012081 max=0.014335 Jy/beam ! Clean residual mean=-0.000022 rms=0.003188 Jy/beam ! Combined flux in latest and established models = 0.226307 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.226307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295327Jy sigma=0.000724 ! Fit after self-cal, rms=0.294655Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00847908 Jy ! Component: 100 - total flux cleaned = 0.0102746 Jy ! Component: 150 - total flux cleaned = 0.0105255 Jy ! Component: 200 - total flux cleaned = 0.0109651 Jy ! Total flux subtracted in 200 components = 0.0109651 Jy ! Clean residual min=-0.010578 max=0.014330 Jy/beam ! Clean residual mean=-0.000005 rms=0.003117 Jy/beam ! Combined flux in latest and established models = 0.237272 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.237272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293010Jy sigma=0.000719 ! Fit after self-cal, rms=0.292488Jy sigma=0.000718 ! Inverting map ! Added new window around map position (36, 77). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123595 Jy ! Component: 100 - total flux cleaned = 0.0187685 Jy ! Component: 150 - total flux cleaned = 0.0235301 Jy ! Component: 200 - total flux cleaned = 0.0268855 Jy ! Total flux subtracted in 200 components = 0.0268855 Jy ! Clean residual min=-0.010714 max=0.011319 Jy/beam ! Clean residual mean=-0.000001 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 0.264157 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.264157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290745Jy sigma=0.000711 ! Fit after self-cal, rms=0.290375Jy sigma=0.000709 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290375Jy sigma=0.000709 ! Fit after self-cal, rms=0.264310Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.128 mas, bmaj=18.2 mas, bpa=-5.914 degrees ! Estimated noise=1160.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769255 Jy ! Component: 100 - total flux cleaned = 0.0137859 Jy ! Component: 150 - total flux cleaned = 0.0184635 Jy ! Component: 200 - total flux cleaned = 0.0219499 Jy ! Total flux subtracted in 200 components = 0.0219499 Jy ! Clean residual min=-0.009472 max=0.014189 Jy/beam ! Clean residual mean=-0.000028 rms=0.003131 Jy/beam ! Combined flux in latest and established models = 0.286107 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 171 components and 0.286107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263687Jy sigma=0.000706 ! Fit after self-cal, rms=0.263257Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-93, 126.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379212 Jy ! Component: 100 - total flux cleaned = 0.00243714 Jy ! Component: 150 - total flux cleaned = 0.0018506 Jy ! Component: 200 - total flux cleaned = 0.00255643 Jy ! Total flux subtracted in 200 components = 0.00255643 Jy ! Clean residual min=-0.008675 max=0.009591 Jy/beam ! Clean residual mean=-0.000042 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 0.288664 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 204 components and 0.288664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261960Jy sigma=0.000702 ! Fit after self-cal, rms=0.261277Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.751 mas, bpa=-4.02 degrees ! Estimated noise=1054.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.751 at -4.02 degrees (North through East) ! Clean map min=-0.010374 max=0.12433 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=6.656 mas, bpa=-2.549 degrees ! Estimated noise=1750.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099338 Jy ! Component: 100 - total flux cleaned = 0.137243 Jy ! Component: 150 - total flux cleaned = 0.161934 Jy ! Component: 200 - total flux cleaned = 0.181506 Jy ! Total flux subtracted in 200 components = 0.181506 Jy ! Clean residual min=-0.015291 max=0.022179 Jy/beam ! Clean residual mean=-0.000080 rms=0.004371 Jy/beam ! Combined flux in latest and established models = 0.181506 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.181506 Jy ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.751 mas, bpa=-4.02 degrees ! Estimated noise=1054.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249014 Jy ! Component: 100 - total flux cleaned = 0.0397311 Jy ! Component: 150 - total flux cleaned = 0.0494597 Jy ! Component: 200 - total flux cleaned = 0.0580381 Jy ! Total flux subtracted in 200 components = 0.0580381 Jy ! Clean residual min=-0.010241 max=0.012012 Jy/beam ! Clean residual mean=-0.000037 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 0.239544 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 74 components and 0.239544 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.128 mas, bmaj=18.2 mas, bpa=-5.914 degrees ! Estimated noise=1160.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135849 Jy ! Component: 100 - total flux cleaned = 0.0196658 Jy ! Component: 150 - total flux cleaned = 0.0244502 Jy ! Component: 200 - total flux cleaned = 0.0286916 Jy ! Total flux subtracted in 200 components = 0.0286916 Jy ! Clean residual min=-0.010618 max=0.009856 Jy/beam ! Clean residual mean=-0.000027 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.268236 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415491 Jy ! Component: 100 - total flux cleaned = 0.00795935 Jy ! Component: 150 - total flux cleaned = 0.0111798 Jy ! Component: 200 - total flux cleaned = 0.0136627 Jy ! Total flux subtracted in 200 components = 0.0136627 Jy ! Clean residual min=-0.009491 max=0.008346 Jy/beam ! Clean residual mean=-0.000016 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.281899 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 131 components and 0.281899 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.751 mas, bpa=-4.02 degrees ! Estimated noise=1054.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586993 Jy ! Component: 100 - total flux cleaned = 0.00771887 Jy ! Component: 150 - total flux cleaned = 0.0088496 Jy ! Component: 200 - total flux cleaned = 0.010169 Jy ! Total flux subtracted in 200 components = 0.010169 Jy ! Clean residual min=-0.007784 max=0.009280 Jy/beam ! Clean residual mean=-0.000004 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.292068 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 164 components and 0.292068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259975Jy sigma=0.000700 ! Fit after self-cal, rms=0.258407Jy sigma=0.000695 wmodel J0320-1702_S_2017_08_12_pus_map.mod ! Writing 164 model components to file: J0320-1702_S_2017_08_12_pus_map.mod wobs J0320-1702_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0320-1702_S_2017_08_12_pus_uvs.fits wwins J0320-1702_S_2017_08_12_pus_map.win ! wwins: Wrote 6 windows to J0320-1702_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380247 Jy ! Component: 100 - total flux cleaned = 0.00685772 Jy ! Component: 150 - total flux cleaned = 0.00948999 Jy ! Component: 200 - total flux cleaned = 0.011749 Jy ! Component: 250 - total flux cleaned = 0.013664 Jy ! Component: 300 - total flux cleaned = 0.0149923 Jy ! Component: 350 - total flux cleaned = 0.0158966 Jy ! Component: 400 - total flux cleaned = 0.0171603 Jy ! Component: 450 - total flux cleaned = 0.0181487 Jy ! Component: 500 - total flux cleaned = 0.0193567 Jy ! Component: 550 - total flux cleaned = 0.0205344 Jy ! Component: 600 - total flux cleaned = 0.0213411 Jy ! Component: 650 - total flux cleaned = 0.0224746 Jy ! Component: 700 - total flux cleaned = 0.0234744 Jy ! Component: 750 - total flux cleaned = 0.0241287 Jy ! Component: 800 - total flux cleaned = 0.0247705 Jy ! Component: 850 - total flux cleaned = 0.0251916 Jy ! Component: 900 - total flux cleaned = 0.0258144 Jy ! Component: 950 - total flux cleaned = 0.0261231 Jy ! Component: 1000 - total flux cleaned = 0.0266277 Jy ! Component: 1050 - total flux cleaned = 0.0270236 Jy ! Component: 1100 - total flux cleaned = 0.0277067 Jy ! Component: 1150 - total flux cleaned = 0.027996 Jy ! Component: 1200 - total flux cleaned = 0.0284694 Jy ! Component: 1250 - total flux cleaned = 0.0288444 Jy ! Component: 1300 - total flux cleaned = 0.0292145 Jy ! Component: 1350 - total flux cleaned = 0.029579 Jy ! Component: 1400 - total flux cleaned = 0.0301192 Jy ! Component: 1450 - total flux cleaned = 0.030473 Jy ! Component: 1500 - total flux cleaned = 0.0308257 Jy ! Component: 1550 - total flux cleaned = 0.0312605 Jy ! Component: 1600 - total flux cleaned = 0.0316051 Jy ! Component: 1650 - total flux cleaned = 0.0319448 Jy ! Component: 1700 - total flux cleaned = 0.0321136 Jy ! Component: 1750 - total flux cleaned = 0.0325307 Jy ! Component: 1800 - total flux cleaned = 0.0327771 Jy ! Component: 1850 - total flux cleaned = 0.0330214 Jy ! Component: 1900 - total flux cleaned = 0.0333423 Jy ! Component: 1950 - total flux cleaned = 0.0334209 Jy ! Component: 2000 - total flux cleaned = 0.0334992 Jy ! Component: 2050 - total flux cleaned = 0.0336556 Jy ! Component: 2100 - total flux cleaned = 0.0339641 Jy ! Component: 2150 - total flux cleaned = 0.0342704 Jy ! Component: 2200 - total flux cleaned = 0.0344208 Jy ! Component: 2250 - total flux cleaned = 0.0344205 Jy ! Component: 2300 - total flux cleaned = 0.0345688 Jy ! Component: 2350 - total flux cleaned = 0.0347155 Jy ! Component: 2400 - total flux cleaned = 0.0346428 Jy ! Component: 2450 - total flux cleaned = 0.0347153 Jy ! Component: 2500 - total flux cleaned = 0.0350735 Jy ! Component: 2550 - total flux cleaned = 0.0351443 Jy ! Component: 2600 - total flux cleaned = 0.0354254 Jy ! Component: 2650 - total flux cleaned = 0.0354257 Jy ! Component: 2700 - total flux cleaned = 0.0356325 Jy ! Component: 2750 - total flux cleaned = 0.0355632 Jy ! Component: 2800 - total flux cleaned = 0.0355636 Jy ! Component: 2850 - total flux cleaned = 0.0355639 Jy ! Component: 2900 - total flux cleaned = 0.0356312 Jy ! Component: 2950 - total flux cleaned = 0.035631 Jy ! Component: 3000 - total flux cleaned = 0.0358944 Jy ! Component: 3050 - total flux cleaned = 0.0357629 Jy ! Component: 3100 - total flux cleaned = 0.0359573 Jy ! Component: 3150 - total flux cleaned = 0.0360209 Jy ! Component: 3200 - total flux cleaned = 0.0359566 Jy ! Component: 3250 - total flux cleaned = 0.03602 Jy ! Component: 3300 - total flux cleaned = 0.0362721 Jy ! Component: 3350 - total flux cleaned = 0.0363972 Jy ! Component: 3400 - total flux cleaned = 0.0364591 Jy ! Component: 3450 - total flux cleaned = 0.0367675 Jy ! Component: 3500 - total flux cleaned = 0.0370119 Jy ! Component: 3550 - total flux cleaned = 0.037134 Jy ! Component: 3600 - total flux cleaned = 0.0373763 Jy ! Component: 3650 - total flux cleaned = 0.0376169 Jy ! Component: 3700 - total flux cleaned = 0.037796 Jy ! Component: 3750 - total flux cleaned = 0.0379741 Jy ! Component: 3800 - total flux cleaned = 0.0381516 Jy ! Component: 3850 - total flux cleaned = 0.0383284 Jy ! Component: 3900 - total flux cleaned = 0.0388532 Jy ! Component: 3950 - total flux cleaned = 0.0390849 Jy ! Component: 4000 - total flux cleaned = 0.0392003 Jy ! Component: 4050 - total flux cleaned = 0.0393724 Jy ! Total flux subtracted in 4096 components = 0.0397141 Jy ! Clean residual min=-0.002851 max=0.003746 Jy/beam ! Clean residual mean=0.000010 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.331782 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 414 components and 0.331782 Jy ![Exited script file: muppet] wmap "J0320-1702_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.751 at -4.02 degrees (North through East) ! Clean map min=-0.01067 max=0.13056 Jy/beam ! Writing clean map to FITS file: J0320-1702_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13056 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103518 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.37862 2.37862 4.75724 9.51448 19.029 38.0579 76.1159 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.751 at -4.02 degrees (North through East) ! Clean map min=-0.01067 max=0.13056 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0320-1702_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:51:34 2019