! Started logfile: J0318-0029_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:25 2019 obs J0318-0029_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0318-0029_S_2017_01_16_pus_uva.fits ! AN table 1: 132 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.61936 visibilities/baseline/integration-bin. ! Found source: J0318-0029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 14716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0318-0029_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 574 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975855Jy sigma=0.007314 ! Fit after self-cal, rms=0.938761Jy sigma=0.007095 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=9.371 mas, bpa=18.29 degrees ! Estimated noise=1544.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512045 Jy ! Component: 100 - total flux cleaned = 0.0628315 Jy ! Total flux subtracted in 100 components = 0.0628315 Jy ! Clean residual min=-0.004485 max=0.004249 Jy/beam ! Clean residual mean=0.000002 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.0628315 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0628315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113766Jy sigma=0.000651 ! Fit after self-cal, rms=0.113474Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.423 mas, bmaj=10.15 mas, bpa=17.19 degrees ! Estimated noise=847.362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492643 Jy ! Component: 100 - total flux cleaned = 0.00698908 Jy ! Component: 150 - total flux cleaned = 0.00758405 Jy ! Component: 200 - total flux cleaned = 0.00768958 Jy ! Total flux subtracted in 200 components = 0.00768958 Jy ! Clean residual min=-0.003202 max=0.003102 Jy/beam ! Clean residual mean=-0.000009 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0705211 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.0705211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113239Jy sigma=0.000647 ! Fit after self-cal, rms=0.113249Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.12 KP 1.00 ! LA 1.01 MK 1.00* NL 0.93 OV 1.03 ! PT 1.09 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 0.95 KP 0.94 ! LA 0.98 MK 1.00* NL 0.94 OV 1.11 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 0.99 KP 1.00 ! LA 1.01 MK 1.00* NL 0.96 OV 0.95 ! PT 1.05 SC 1.16 ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.12 HN 0.92 KP 0.61 ! LA 0.66 MK 1.00* NL 1.00* OV 0.99 ! PT 0.91 SC 0.69 ! ! ! Fit before self-cal, rms=0.113249Jy sigma=0.000647 ! Fit after self-cal, rms=0.096602Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.42 mas, bmaj=10.14 mas, bpa=16.88 degrees ! Estimated noise=849.704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689545 Jy ! Component: 100 - total flux cleaned = 0.000719369 Jy ! Component: 150 - total flux cleaned = 0.000769759 Jy ! Component: 200 - total flux cleaned = 0.000789941 Jy ! Total flux subtracted in 200 components = 0.000789941 Jy ! Clean residual min=-0.002509 max=0.002696 Jy/beam ! Clean residual mean=-0.000006 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0713111 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0713111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096588Jy sigma=0.000646 ! Fit after self-cal, rms=0.096362Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096362Jy sigma=0.000645 ! Fit after self-cal, rms=0.098002Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.428 mas, bmaj=10.09 mas, bpa=16.73 degrees ! Estimated noise=849.927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298368 Jy ! Component: 100 - total flux cleaned = 0.000375137 Jy ! Component: 150 - total flux cleaned = 0.000416516 Jy ! Component: 200 - total flux cleaned = 0.000433872 Jy ! Total flux subtracted in 200 components = 0.000433872 Jy ! Clean residual min=-0.001958 max=0.002104 Jy/beam ! Clean residual mean=-0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0717449 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0717449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097991Jy sigma=0.000643 ! Fit after self-cal, rms=0.098083Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.52728e-05 Jy ! Component: 100 - total flux cleaned = 0.000123162 Jy ! Component: 150 - total flux cleaned = 0.000155859 Jy ! Component: 200 - total flux cleaned = 0.000184838 Jy ! Total flux subtracted in 200 components = 0.000184838 Jy ! Clean residual min=-0.001949 max=0.002029 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0719298 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0719298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098076Jy sigma=0.000642 ! Fit after self-cal, rms=0.098078Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098078Jy sigma=0.000642 ! Fit after self-cal, rms=0.099568Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.432 mas, bmaj=10.09 mas, bpa=16.59 degrees ! Estimated noise=851.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142763 Jy ! Component: 100 - total flux cleaned = 0.000196136 Jy ! Component: 150 - total flux cleaned = 0.000226041 Jy ! Component: 200 - total flux cleaned = 0.000239007 Jy ! Total flux subtracted in 200 components = 0.000239007 Jy ! Clean residual min=-0.001868 max=0.002062 Jy/beam ! Clean residual mean=-0.000002 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0721688 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.0721688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099562Jy sigma=0.000642 ! Fit after self-cal, rms=0.099584Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.44714e-05 Jy ! Component: 100 - total flux cleaned = -5.61325e-05 Jy ! Component: 150 - total flux cleaned = -3.17654e-05 Jy ! Component: 200 - total flux cleaned = -1.02919e-05 Jy ! Total flux subtracted in 200 components = -1.02919e-05 Jy ! Clean residual min=-0.001872 max=0.002011 Jy/beam ! Clean residual mean=-0.000003 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0721585 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0721585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099581Jy sigma=0.000642 ! Fit after self-cal, rms=0.099583Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099583Jy sigma=0.000642 ! Fit after self-cal, rms=0.100032Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.176 mas, bmaj=12.34 mas, bpa=7.828 degrees ! Estimated noise=979.989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.00624e-05 Jy ! Component: 100 - total flux cleaned = 8.66256e-06 Jy ! Component: 150 - total flux cleaned = -7.23486e-06 Jy ! Component: 200 - total flux cleaned = -7.1288e-06 Jy ! Total flux subtracted in 200 components = -7.1288e-06 Jy ! Clean residual min=-0.002160 max=0.001885 Jy/beam ! Clean residual mean=-0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0721514 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.0721514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100030Jy sigma=0.000642 ! Fit after self-cal, rms=0.100039Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.27509e-06 Jy ! Component: 100 - total flux cleaned = -2.55941e-06 Jy ! Component: 150 - total flux cleaned = -9.49369e-06 Jy ! Component: 200 - total flux cleaned = -1.5516e-05 Jy ! Total flux subtracted in 200 components = -1.5516e-05 Jy ! Clean residual min=-0.002175 max=0.001872 Jy/beam ! Clean residual mean=-0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0721359 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0721359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100037Jy sigma=0.000642 ! Fit after self-cal, rms=0.100038Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.437 mas, bmaj=10.08 mas, bpa=16.5 degrees ! Estimated noise=853.385 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.437 x 10.08 at 16.5 degrees (North through East) ! Clean map min=-0.0018198 max=0.065727 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=9.313 mas, bpa=17.93 degrees ! Estimated noise=1512.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0496061 Jy ! Component: 100 - total flux cleaned = 0.0616134 Jy ! Component: 150 - total flux cleaned = 0.0667661 Jy ! Component: 200 - total flux cleaned = 0.0689038 Jy ! Total flux subtracted in 200 components = 0.0689038 Jy ! Clean residual min=-0.003870 max=0.004108 Jy/beam ! Clean residual mean=0.000000 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.0689038 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0689038 Jy ! Inverting map and beam ! Estimated beam: bmin=4.437 mas, bmaj=10.08 mas, bpa=16.5 degrees ! Estimated noise=853.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233521 Jy ! Component: 100 - total flux cleaned = 0.00257092 Jy ! Component: 150 - total flux cleaned = 0.00261593 Jy ! Component: 200 - total flux cleaned = 0.00265176 Jy ! Total flux subtracted in 200 components = 0.00265176 Jy ! Clean residual min=-0.002044 max=0.001921 Jy/beam ! Clean residual mean=-0.000002 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0715556 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0715555 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.176 mas, bmaj=12.34 mas, bpa=7.828 degrees ! Estimated noise=979.989 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479848 Jy ! Component: 100 - total flux cleaned = 0.000478275 Jy ! Component: 150 - total flux cleaned = 0.000444869 Jy ! Component: 200 - total flux cleaned = 0.000444728 Jy ! Total flux subtracted in 200 components = 0.000444728 Jy ! Clean residual min=-0.002195 max=0.001874 Jy/beam ! Clean residual mean=-0.000003 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0720003 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.3071e-05 Jy ! Component: 100 - total flux cleaned = -1.34556e-05 Jy ! Component: 150 - total flux cleaned = -2.47191e-05 Jy ! Component: 200 - total flux cleaned = -2.49933e-05 Jy ! Total flux subtracted in 200 components = -2.49933e-05 Jy ! Clean residual min=-0.002223 max=0.001857 Jy/beam ! Clean residual mean=-0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0719753 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.0719753 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.437 mas, bmaj=10.08 mas, bpa=16.5 degrees ! Estimated noise=853.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.83504e-05 Jy ! Component: 100 - total flux cleaned = -3.84865e-06 Jy ! Component: 150 - total flux cleaned = -5.17297e-06 Jy ! Component: 200 - total flux cleaned = -5.21215e-06 Jy ! Total flux subtracted in 200 components = -5.21215e-06 Jy ! Clean residual min=-0.001937 max=0.001990 Jy/beam ! Clean residual mean=-0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0719701 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0719701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100039Jy sigma=0.000642 ! Fit after self-cal, rms=0.100036Jy sigma=0.000642 wmodel J0318-0029_S_2017_01_16_pus_map.mod ! Writing 56 model components to file: J0318-0029_S_2017_01_16_pus_map.mod wobs J0318-0029_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0318-0029_S_2017_01_16_pus_uvs.fits wwins J0318-0029_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0318-0029_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256738 Jy ! Component: 100 - total flux cleaned = 6.41501e-05 Jy ! Component: 150 - total flux cleaned = -2.87756e-05 Jy ! Component: 200 - total flux cleaned = -0.000146982 Jy ! Component: 250 - total flux cleaned = -0.000259825 Jy ! Component: 300 - total flux cleaned = -0.000369217 Jy ! Component: 350 - total flux cleaned = -0.000502203 Jy ! Component: 400 - total flux cleaned = -0.00052765 Jy ! Component: 450 - total flux cleaned = -0.000630206 Jy ! Component: 500 - total flux cleaned = -0.000780247 Jy ! Component: 550 - total flux cleaned = -0.000804551 Jy ! Component: 600 - total flux cleaned = -0.000877243 Jy ! Component: 650 - total flux cleaned = -0.000924892 Jy ! Component: 700 - total flux cleaned = -0.00104143 Jy ! Component: 750 - total flux cleaned = -0.00104155 Jy ! Component: 800 - total flux cleaned = -0.00115499 Jy ! Component: 850 - total flux cleaned = -0.00119982 Jy ! Component: 900 - total flux cleaned = -0.00128772 Jy ! Component: 950 - total flux cleaned = -0.0013523 Jy ! Component: 1000 - total flux cleaned = -0.00145923 Jy ! Component: 1050 - total flux cleaned = -0.00152209 Jy ! Component: 1100 - total flux cleaned = -0.00158459 Jy ! Component: 1150 - total flux cleaned = -0.00166676 Jy ! Component: 1200 - total flux cleaned = -0.00180886 Jy ! Component: 1250 - total flux cleaned = -0.00184878 Jy ! Component: 1300 - total flux cleaned = -0.00196767 Jy ! Component: 1350 - total flux cleaned = -0.00198714 Jy ! Component: 1400 - total flux cleaned = -0.00204548 Jy ! Component: 1450 - total flux cleaned = -0.00216038 Jy ! Component: 1500 - total flux cleaned = -0.00217918 Jy ! Component: 1550 - total flux cleaned = -0.0022917 Jy ! Component: 1600 - total flux cleaned = -0.00234756 Jy ! Component: 1650 - total flux cleaned = -0.00245757 Jy ! Component: 1700 - total flux cleaned = -0.00251184 Jy ! Component: 1750 - total flux cleaned = -0.00261992 Jy ! Component: 1800 - total flux cleaned = -0.00265574 Jy ! Component: 1850 - total flux cleaned = -0.00269122 Jy ! Component: 1900 - total flux cleaned = -0.00272632 Jy ! Component: 1950 - total flux cleaned = -0.0027611 Jy ! Component: 2000 - total flux cleaned = -0.0027612 Jy ! Component: 2050 - total flux cleaned = -0.00281247 Jy ! Component: 2100 - total flux cleaned = -0.00288004 Jy ! Component: 2150 - total flux cleaned = -0.00294694 Jy ! Component: 2200 - total flux cleaned = -0.00301332 Jy ! Component: 2250 - total flux cleaned = -0.00309521 Jy ! Component: 2300 - total flux cleaned = -0.00307893 Jy ! Component: 2350 - total flux cleaned = -0.00320818 Jy ! Component: 2400 - total flux cleaned = -0.00324026 Jy ! Component: 2450 - total flux cleaned = -0.00330394 Jy ! Component: 2500 - total flux cleaned = -0.00341409 Jy ! Component: 2550 - total flux cleaned = -0.00344519 Jy ! Component: 2600 - total flux cleaned = -0.00347629 Jy ! Component: 2650 - total flux cleaned = -0.00359944 Jy ! Component: 2700 - total flux cleaned = -0.00364522 Jy ! Component: 2750 - total flux cleaned = -0.00369065 Jy ! Component: 2800 - total flux cleaned = -0.00378063 Jy ! Component: 2850 - total flux cleaned = -0.00381053 Jy ! Component: 2900 - total flux cleaned = -0.00388437 Jy ! Component: 2950 - total flux cleaned = -0.00389918 Jy ! Component: 3000 - total flux cleaned = -0.00391386 Jy ! Component: 3050 - total flux cleaned = -0.00400054 Jy ! Component: 3100 - total flux cleaned = -0.00402918 Jy ! Component: 3150 - total flux cleaned = -0.00412901 Jy ! Component: 3200 - total flux cleaned = -0.00417128 Jy ! Component: 3250 - total flux cleaned = -0.00424159 Jy ! Component: 3300 - total flux cleaned = -0.00425535 Jy ! Component: 3350 - total flux cleaned = -0.0042693 Jy ! Component: 3400 - total flux cleaned = -0.00428302 Jy ! Component: 3450 - total flux cleaned = -0.00435119 Jy ! Component: 3500 - total flux cleaned = -0.00429695 Jy ! Component: 3550 - total flux cleaned = -0.00436449 Jy ! Component: 3600 - total flux cleaned = -0.00441795 Jy ! Component: 3650 - total flux cleaned = -0.00437812 Jy ! Component: 3700 - total flux cleaned = -0.00444415 Jy ! Component: 3750 - total flux cleaned = -0.00453608 Jy ! Component: 3800 - total flux cleaned = -0.00450996 Jy ! Component: 3850 - total flux cleaned = -0.00456191 Jy ! Component: 3900 - total flux cleaned = -0.00458763 Jy ! Component: 3950 - total flux cleaned = -0.00460046 Jy ! Component: 4000 - total flux cleaned = -0.0046514 Jy ! Component: 4050 - total flux cleaned = -0.00470186 Jy ! Total flux subtracted in 4096 components = -0.00472708 Jy ! Clean residual min=-0.000862 max=0.000775 Jy/beam ! Clean residual mean=-0.000000 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.067243 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 332 components and 0.067243 Jy ![Exited script file: muppet] wmap "J0318-0029_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.437 x 10.08 at 16.5 degrees (North through East) ! Clean map min=-0.0017153 max=0.065857 Jy/beam ! Writing clean map to FITS file: J0318-0029_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0658575 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240611 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09605 1.09605 2.19211 4.38421 8.76842 17.5368 35.0737 70.1474 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.437 x 10.08 at 16.5 degrees (North through East) ! Clean map min=-0.0017153 max=0.065857 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0318-0029_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:31 2019