! Started logfile: J0317-4414_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:19 2019 obs J0317-4414_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0317-4414_S_2017_01_16_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.326437 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0317-4414 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 8520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0317-4414_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 646 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 673 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 646 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 925 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996602Jy sigma=0.005211 ! Fit after self-cal, rms=0.919472Jy sigma=0.004892 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=18.23 mas, bpa=19.09 degrees ! Estimated noise=5014.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771185 Jy ! Component: 100 - total flux cleaned = 0.0927087 Jy ! Total flux subtracted in 100 components = 0.0927087 Jy ! Clean residual min=-0.015555 max=0.015255 Jy/beam ! Clean residual mean=-0.000042 rms=0.004468 Jy/beam ! Combined flux in latest and established models = 0.0927087 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0927087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190990Jy sigma=0.000618 ! Fit after self-cal, rms=0.190397Jy sigma=0.000615 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=22.21 mas, bpa=18.77 degrees ! Estimated noise=1637.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722385 Jy ! Component: 100 - total flux cleaned = -0.000668888 Jy ! Component: 150 - total flux cleaned = -0.000669438 Jy ! Component: 200 - total flux cleaned = -0.00062569 Jy ! Total flux subtracted in 200 components = -0.00062569 Jy ! Clean residual min=-0.003865 max=0.005234 Jy/beam ! Clean residual mean=-0.000046 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.092083 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.092083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190410Jy sigma=0.000614 ! Fit after self-cal, rms=0.190416Jy sigma=0.000614 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.08 ! LA 0.98 MK 1.00* NL 0.96 OV 1.07 ! PT 1.05 SC 1.08 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.92 ! LA 1.08 MK 1.00* NL 1.02 OV 1.08 ! PT 1.08 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.04 ! LA 1.00 MK 1.00* NL 0.96 OV 1.02 ! PT 1.05 SC 1.11 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.55 ! LA 0.31 MK 1.00* NL 1.00* OV 0.91 ! PT 0.88 SC 0.67 ! ! ! Fit before self-cal, rms=0.190416Jy sigma=0.000614 ! Fit after self-cal, rms=0.129135Jy sigma=0.000609 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=22.07 mas, bpa=18.58 degrees ! Estimated noise=1681.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246236 Jy ! Component: 100 - total flux cleaned = 0.000287871 Jy ! Component: 150 - total flux cleaned = 0.000322986 Jy ! Component: 200 - total flux cleaned = 0.000378475 Jy ! Total flux subtracted in 200 components = 0.000378475 Jy ! Clean residual min=-0.003390 max=0.003284 Jy/beam ! Clean residual mean=-0.000095 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0924615 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0924615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129108Jy sigma=0.000609 ! Fit after self-cal, rms=0.128637Jy sigma=0.000608 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128637Jy sigma=0.000608 ! Fit after self-cal, rms=0.127853Jy sigma=0.000607 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=22.07 mas, bpa=18.58 degrees ! Estimated noise=1680.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496037 Jy ! Component: 100 - total flux cleaned = 0.000572027 Jy ! Component: 150 - total flux cleaned = 0.000612738 Jy ! Component: 200 - total flux cleaned = 0.000631439 Jy ! Total flux subtracted in 200 components = 0.000631439 Jy ! Clean residual min=-0.003496 max=0.003126 Jy/beam ! Clean residual mean=-0.000097 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.0930929 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.0930929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127842Jy sigma=0.000607 ! Fit after self-cal, rms=0.127836Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126238 Jy ! Component: 100 - total flux cleaned = 0.00018474 Jy ! Component: 150 - total flux cleaned = 0.000184081 Jy ! Component: 200 - total flux cleaned = 0.000184237 Jy ! Total flux subtracted in 200 components = 0.000184237 Jy ! Clean residual min=-0.003526 max=0.003071 Jy/beam ! Clean residual mean=-0.000098 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.0932772 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.0932772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127830Jy sigma=0.000607 ! Fit after self-cal, rms=0.127828Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127828Jy sigma=0.000607 ! Fit after self-cal, rms=0.128226Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=22.12 mas, bpa=18.56 degrees ! Estimated noise=1679.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197875 Jy ! Component: 100 - total flux cleaned = -0.00016311 Jy ! Component: 150 - total flux cleaned = -0.000133207 Jy ! Component: 200 - total flux cleaned = -0.000118996 Jy ! Total flux subtracted in 200 components = -0.000118996 Jy ! Clean residual min=-0.003256 max=0.003308 Jy/beam ! Clean residual mean=-0.000098 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0931582 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0931582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128220Jy sigma=0.000607 ! Fit after self-cal, rms=0.128256Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78875e-05 Jy ! Component: 100 - total flux cleaned = -2.98997e-06 Jy ! Component: 150 - total flux cleaned = 1.27598e-05 Jy ! Component: 200 - total flux cleaned = 2.79852e-05 Jy ! Total flux subtracted in 200 components = 2.79852e-05 Jy ! Clean residual min=-0.003137 max=0.003080 Jy/beam ! Clean residual mean=-0.000099 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0931862 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.0931862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128251Jy sigma=0.000606 ! Fit after self-cal, rms=0.128249Jy sigma=0.000606 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128249Jy sigma=0.000606 ! Fit after self-cal, rms=0.128655Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.38 mas, bmaj=41.88 mas, bpa=4.735 degrees ! Estimated noise=1933.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198607 Jy ! Component: 100 - total flux cleaned = -0.000170013 Jy ! Component: 150 - total flux cleaned = -0.000152225 Jy ! Component: 200 - total flux cleaned = -0.000127444 Jy ! Total flux subtracted in 200 components = -0.000127444 Jy ! Clean residual min=-0.003202 max=0.002793 Jy/beam ! Clean residual mean=-0.000148 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.0930587 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.0930587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128654Jy sigma=0.000606 ! Fit after self-cal, rms=0.128698Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.3947e-06 Jy ! Component: 100 - total flux cleaned = 1.73243e-05 Jy ! Component: 150 - total flux cleaned = 4.42017e-05 Jy ! Component: 200 - total flux cleaned = 6.09059e-05 Jy ! Total flux subtracted in 200 components = 6.09059e-05 Jy ! Clean residual min=-0.003245 max=0.002749 Jy/beam ! Clean residual mean=-0.000148 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.0931196 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.0931196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128697Jy sigma=0.000606 ! Fit after self-cal, rms=0.128700Jy sigma=0.000606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=22.17 mas, bpa=18.52 degrees ! Estimated noise=1679.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 22.17 at 18.52 degrees (North through East) ! Clean map min=-0.0030687 max=0.089421 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=18.24 mas, bpa=18.42 degrees ! Estimated noise=5321.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0742712 Jy ! Component: 100 - total flux cleaned = 0.091854 Jy ! Component: 150 - total flux cleaned = 0.0922819 Jy ! Component: 200 - total flux cleaned = 0.0923025 Jy ! Total flux subtracted in 200 components = 0.0923025 Jy ! Clean residual min=-0.014703 max=0.014543 Jy/beam ! Clean residual mean=-0.000102 rms=0.004024 Jy/beam ! Combined flux in latest and established models = 0.0923025 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0923025 Jy ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=22.17 mas, bpa=18.52 degrees ! Estimated noise=1679.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390359 Jy ! Component: 100 - total flux cleaned = -0.000393332 Jy ! Component: 150 - total flux cleaned = -0.000224847 Jy ! Component: 200 - total flux cleaned = -0.000157303 Jy ! Total flux subtracted in 200 components = -0.000157303 Jy ! Clean residual min=-0.003159 max=0.003052 Jy/beam ! Clean residual mean=-0.000106 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.0921452 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.0921452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.38 mas, bmaj=41.88 mas, bpa=4.735 degrees ! Estimated noise=1933.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704062 Jy ! Component: 100 - total flux cleaned = 0.00083836 Jy ! Component: 150 - total flux cleaned = 0.000897899 Jy ! Component: 200 - total flux cleaned = 0.000950317 Jy ! Total flux subtracted in 200 components = 0.000950317 Jy ! Clean residual min=-0.003174 max=0.002783 Jy/beam ! Clean residual mean=-0.000152 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.0930955 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.6009e-05 Jy ! Component: 100 - total flux cleaned = 8.80438e-05 Jy ! Component: 150 - total flux cleaned = 0.000106431 Jy ! Component: 200 - total flux cleaned = 0.000124427 Jy ! Total flux subtracted in 200 components = 0.000124427 Jy ! Clean residual min=-0.003217 max=0.002807 Jy/beam ! Clean residual mean=-0.000150 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.09322 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.09322 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=22.17 mas, bpa=18.52 degrees ! Estimated noise=1679.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182821 Jy ! Component: 100 - total flux cleaned = -0.000295774 Jy ! Component: 150 - total flux cleaned = -0.000357745 Jy ! Component: 200 - total flux cleaned = -0.000357608 Jy ! Total flux subtracted in 200 components = -0.000357608 Jy ! Clean residual min=-0.003094 max=0.003128 Jy/beam ! Clean residual mean=-0.000101 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.0928623 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.0928623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128715Jy sigma=0.000606 ! Fit after self-cal, rms=0.128679Jy sigma=0.000606 wmodel J0317-4414_S_2017_01_16_pus_map.mod ! Writing 66 model components to file: J0317-4414_S_2017_01_16_pus_map.mod wobs J0317-4414_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0317-4414_S_2017_01_16_pus_uvs.fits wwins J0317-4414_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0317-4414_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121356 Jy ! Component: 100 - total flux cleaned = 0.000338566 Jy ! Component: 150 - total flux cleaned = 0.000437926 Jy ! Component: 200 - total flux cleaned = 0.00048289 Jy ! Component: 250 - total flux cleaned = 0.000524808 Jy ! Component: 300 - total flux cleaned = 0.000564411 Jy ! Component: 350 - total flux cleaned = 0.000563827 Jy ! Component: 400 - total flux cleaned = 0.000602145 Jy ! Component: 450 - total flux cleaned = 0.000604244 Jy ! Component: 500 - total flux cleaned = 0.00053631 Jy ! Component: 550 - total flux cleaned = 0.000304963 Jy ! Component: 600 - total flux cleaned = 0.000111609 Jy ! Component: 650 - total flux cleaned = -0.000108436 Jy ! Component: 700 - total flux cleaned = -0.000291738 Jy ! Component: 750 - total flux cleaned = -0.000530884 Jy ! Component: 800 - total flux cleaned = -0.000763935 Jy ! Component: 850 - total flux cleaned = -0.000991051 Jy ! Component: 900 - total flux cleaned = -0.00118533 Jy ! Component: 950 - total flux cleaned = -0.001402 Jy ! Component: 1000 - total flux cleaned = -0.00156015 Jy ! Component: 1050 - total flux cleaned = -0.00176687 Jy ! Component: 1100 - total flux cleaned = -0.00191928 Jy ! Component: 1150 - total flux cleaned = -0.00214321 Jy ! Component: 1200 - total flux cleaned = -0.0023141 Jy ! Component: 1250 - total flux cleaned = -0.002482 Jy ! Component: 1300 - total flux cleaned = -0.00264667 Jy ! Component: 1350 - total flux cleaned = -0.00283128 Jy ! Component: 1400 - total flux cleaned = -0.00296739 Jy ! Component: 1450 - total flux cleaned = -0.00319027 Jy ! Component: 1500 - total flux cleaned = -0.00336507 Jy ! Component: 1550 - total flux cleaned = -0.00345139 Jy ! Component: 1600 - total flux cleaned = -0.0036426 Jy ! Component: 1650 - total flux cleaned = -0.00381004 Jy ! Component: 1700 - total flux cleaned = -0.00395438 Jy ! Component: 1750 - total flux cleaned = -0.00417741 Jy ! Component: 1800 - total flux cleaned = -0.00435727 Jy ! Component: 1850 - total flux cleaned = -0.00453445 Jy ! Component: 1900 - total flux cleaned = -0.00468995 Jy ! Component: 1950 - total flux cleaned = -0.00488237 Jy ! Component: 2000 - total flux cleaned = -0.0050528 Jy ! Component: 2050 - total flux cleaned = -0.00518395 Jy ! Component: 2100 - total flux cleaned = -0.00527667 Jy ! Component: 2150 - total flux cleaned = -0.00542341 Jy ! Component: 2200 - total flux cleaned = -0.00560455 Jy ! Component: 2250 - total flux cleaned = -0.00558676 Jy ! Component: 2300 - total flux cleaned = -0.00567568 Jy ! Component: 2350 - total flux cleaned = -0.00572852 Jy ! Component: 2400 - total flux cleaned = -0.0057808 Jy ! Component: 2450 - total flux cleaned = -0.00581539 Jy ! Component: 2500 - total flux cleaned = -0.0058497 Jy ! Component: 2550 - total flux cleaned = -0.00588383 Jy ! Component: 2600 - total flux cleaned = -0.00596869 Jy ! Component: 2650 - total flux cleaned = -0.00606976 Jy ! Component: 2700 - total flux cleaned = -0.00613667 Jy ! Component: 2750 - total flux cleaned = -0.00620324 Jy ! Component: 2800 - total flux cleaned = -0.00628597 Jy ! Component: 2850 - total flux cleaned = -0.0064176 Jy ! Component: 2900 - total flux cleaned = -0.00649941 Jy ! Component: 2950 - total flux cleaned = -0.00659718 Jy ! Component: 3000 - total flux cleaned = -0.00674323 Jy ! Component: 3050 - total flux cleaned = -0.0068564 Jy ! Component: 3100 - total flux cleaned = -0.00698527 Jy ! Component: 3150 - total flux cleaned = -0.00708167 Jy ! Component: 3200 - total flux cleaned = -0.0072099 Jy ! Component: 3250 - total flux cleaned = -0.00732176 Jy ! Component: 3300 - total flux cleaned = -0.0074492 Jy ! Component: 3350 - total flux cleaned = -0.00759254 Jy ! Component: 3400 - total flux cleaned = -0.00771975 Jy ! Component: 3450 - total flux cleaned = -0.00784686 Jy ! Component: 3500 - total flux cleaned = -0.00795799 Jy ! Component: 3550 - total flux cleaned = -0.00800555 Jy ! Component: 3600 - total flux cleaned = -0.00811658 Jy ! Component: 3650 - total flux cleaned = -0.00824331 Jy ! Component: 3700 - total flux cleaned = -0.00833836 Jy ! Component: 3750 - total flux cleaned = -0.00841754 Jy ! Component: 3800 - total flux cleaned = -0.00852824 Jy ! Component: 3850 - total flux cleaned = -0.00862322 Jy ! Component: 3900 - total flux cleaned = -0.00871817 Jy ! Component: 3950 - total flux cleaned = -0.0088132 Jy ! Component: 4000 - total flux cleaned = -0.00889242 Jy ! Component: 4050 - total flux cleaned = -0.00898738 Jy ! Total flux subtracted in 4096 components = -0.00906658 Jy ! Clean residual min=-0.000877 max=0.000823 Jy/beam ! Clean residual mean=-0.000017 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0837958 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 287 components and 0.0837958 Jy ![Exited script file: muppet] wmap "J0317-4414_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 22.17 at 18.52 degrees (North through East) ! Clean map min=-0.0024985 max=0.084565 Jy/beam ! Writing clean map to FITS file: J0317-4414_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0845649 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000291817 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03524 1.03524 2.07048 4.14096 8.28192 16.5638 33.1277 66.2554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 22.17 at 18.52 degrees (North through East) ! Clean map min=-0.0024985 max=0.084565 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0317-4414_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:25 2019