! Started logfile: J0317-2803_S_2017_10_21_pus_uvs.log on Sat May 11 20:48:59 2019 obs J0317-2803_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0317-2803_S_2017_10_21_pus_uva.fits ! AN table 1: 72 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.761574 visibilities/baseline/integration-bin. ! Found source: J0317-2803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 7896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0317-2803_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 365 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.967534Jy sigma=0.007966 ! Fit after self-cal, rms=0.932912Jy sigma=0.007703 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=22.52 mas, bpa=-16.07 degrees ! Estimated noise=1828.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512139 Jy ! Component: 100 - total flux cleaned = 0.0664133 Jy ! Total flux subtracted in 100 components = 0.0664133 Jy ! Clean residual min=-0.011342 max=0.010762 Jy/beam ! Clean residual mean=-0.000359 rms=0.003827 Jy/beam ! Combined flux in latest and established models = 0.0664133 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0664133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106960Jy sigma=0.000804 ! Fit after self-cal, rms=0.106431Jy sigma=0.000799 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=24.62 mas, bpa=-16.18 degrees ! Estimated noise=1202.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123895 Jy ! Component: 100 - total flux cleaned = 0.019364 Jy ! Component: 150 - total flux cleaned = 0.0237502 Jy ! Component: 200 - total flux cleaned = 0.0266554 Jy ! Total flux subtracted in 200 components = 0.0266554 Jy ! Clean residual min=-0.010562 max=0.015936 Jy/beam ! Clean residual mean=-0.000310 rms=0.004859 Jy/beam ! Combined flux in latest and established models = 0.0930687 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 64 components and 0.0930687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104816Jy sigma=0.000787 ! Fit after self-cal, rms=0.104847Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.64 ! LA 0.93 MK 1.13 NL 0.90 OV 1.06 ! PT 0.76 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.92 KP 1.56 ! LA 1.03 MK 1.13 NL 1.05 OV 1.08 ! PT 0.74 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.36 ! LA 0.83 MK 1.14 NL 1.12 OV 1.03 ! PT 0.74 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00* ! LA 0.75 MK 1.01 NL 1.00* OV 1.00* ! PT 0.68 ! ! ! Fit before self-cal, rms=0.104847Jy sigma=0.000786 ! Fit after self-cal, rms=0.106442Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=24.71 mas, bpa=-16.04 degrees ! Estimated noise=1217.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168098 Jy ! Component: 100 - total flux cleaned = -0.00223648 Jy ! Component: 150 - total flux cleaned = -0.00243731 Jy ! Component: 200 - total flux cleaned = -0.0026828 Jy ! Total flux subtracted in 200 components = -0.0026828 Jy ! Clean residual min=-0.008116 max=0.016605 Jy/beam ! Clean residual mean=-0.000103 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 0.0903859 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.0903859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106352Jy sigma=0.000766 ! Fit after self-cal, rms=0.107887Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107887Jy sigma=0.000759 ! Fit after self-cal, rms=0.120671Jy sigma=0.000756 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=24.93 mas, bpa=-15.98 degrees ! Estimated noise=1240.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107609 Jy ! Component: 100 - total flux cleaned = -0.0013532 Jy ! Component: 150 - total flux cleaned = -0.001542 Jy ! Component: 200 - total flux cleaned = -0.00171975 Jy ! Total flux subtracted in 200 components = -0.00171975 Jy ! Clean residual min=-0.006639 max=0.015001 Jy/beam ! Clean residual mean=-0.000062 rms=0.003200 Jy/beam ! Combined flux in latest and established models = 0.0886661 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.0886662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120601Jy sigma=0.000756 ! Fit after self-cal, rms=0.121869Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.5, 57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012252 Jy ! Component: 100 - total flux cleaned = 0.0139401 Jy ! Component: 150 - total flux cleaned = 0.0133883 Jy ! Component: 200 - total flux cleaned = 0.0135159 Jy ! Total flux subtracted in 200 components = 0.0135159 Jy ! Clean residual min=-0.006091 max=0.007574 Jy/beam ! Clean residual mean=-0.000091 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 0.102182 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 179 components and 0.102182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120074Jy sigma=0.000741 ! Fit after self-cal, rms=0.118558Jy sigma=0.000736 ! Inverting map ! Added new window around map position (-49, 85.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101006 Jy ! Component: 100 - total flux cleaned = 0.0143357 Jy ! Component: 150 - total flux cleaned = 0.0178594 Jy ! Component: 200 - total flux cleaned = 0.0197219 Jy ! Total flux subtracted in 200 components = 0.0197219 Jy ! Clean residual min=-0.006470 max=0.005938 Jy/beam ! Clean residual mean=0.000002 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.121904 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 252 components and 0.121904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117020Jy sigma=0.000728 ! Fit after self-cal, rms=0.116062Jy sigma=0.000725 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116062Jy sigma=0.000725 ! Fit after self-cal, rms=0.105677Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=24.57 mas, bpa=-15.87 degrees ! Estimated noise=1184.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660754 Jy ! Component: 100 - total flux cleaned = 0.00949033 Jy ! Component: 150 - total flux cleaned = 0.0110115 Jy ! Component: 200 - total flux cleaned = 0.0123201 Jy ! Total flux subtracted in 200 components = 0.0123201 Jy ! Clean residual min=-0.005582 max=0.004866 Jy/beam ! Clean residual mean=-0.000027 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.134224 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 299 components and 0.134224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105001Jy sigma=0.000717 ! Fit after self-cal, rms=0.104013Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458862 Jy ! Component: 100 - total flux cleaned = 0.00633943 Jy ! Component: 150 - total flux cleaned = 0.00730701 Jy ! Component: 200 - total flux cleaned = 0.00863599 Jy ! Total flux subtracted in 200 components = 0.00863599 Jy ! Clean residual min=-0.006293 max=0.004788 Jy/beam ! Clean residual mean=-0.000022 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.14286 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 340 components and 0.14286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103499Jy sigma=0.000712 ! Fit after self-cal, rms=0.103223Jy sigma=0.000710 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103223Jy sigma=0.000710 ! Fit after self-cal, rms=0.098800Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.589 mas, bmaj=36.62 mas, bpa=-1.672 degrees ! Estimated noise=1300.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429503 Jy ! Component: 100 - total flux cleaned = 0.00599296 Jy ! Component: 150 - total flux cleaned = 0.00751306 Jy ! Component: 200 - total flux cleaned = 0.00876366 Jy ! Total flux subtracted in 200 components = 0.00876366 Jy ! Clean residual min=-0.007608 max=0.004834 Jy/beam ! Clean residual mean=-0.000080 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.151624 Jy selfcal ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 412 components and 0.151624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098487Jy sigma=0.000706 ! Fit after self-cal, rms=0.098013Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322901 Jy ! Component: 100 - total flux cleaned = 0.00494967 Jy ! Component: 150 - total flux cleaned = 0.00666536 Jy ! Component: 200 - total flux cleaned = 0.00849763 Jy ! Total flux subtracted in 200 components = 0.00849763 Jy ! Clean residual min=-0.007747 max=0.004935 Jy/beam ! Clean residual mean=-0.000074 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.160121 Jy ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 488 components and 0.160121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097790Jy sigma=0.000703 ! Fit after self-cal, rms=0.097595Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=24.63 mas, bpa=-15.85 degrees ! Estimated noise=1162.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 24.63 at -15.85 degrees (North through East) ! Clean map min=-0.0059429 max=0.063023 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=22.26 mas, bpa=-15.86 degrees ! Estimated noise=1867.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484607 Jy ! Component: 100 - total flux cleaned = 0.0701598 Jy ! Component: 150 - total flux cleaned = 0.0859445 Jy ! Component: 200 - total flux cleaned = 0.0973437 Jy ! Total flux subtracted in 200 components = 0.0973437 Jy ! Clean residual min=-0.010966 max=0.009940 Jy/beam ! Clean residual mean=-0.000218 rms=0.003585 Jy/beam ! Combined flux in latest and established models = 0.0973438 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.0973438 Jy ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=24.63 mas, bpa=-15.85 degrees ! Estimated noise=1162.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148112 Jy ! Component: 100 - total flux cleaned = 0.0257102 Jy ! Component: 150 - total flux cleaned = 0.034603 Jy ! Component: 200 - total flux cleaned = 0.0411158 Jy ! Total flux subtracted in 200 components = 0.0411158 Jy ! Clean residual min=-0.007644 max=0.006597 Jy/beam ! Clean residual mean=-0.000170 rms=0.002618 Jy/beam ! Combined flux in latest and established models = 0.13846 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 124 components and 0.13846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.589 mas, bmaj=36.62 mas, bpa=-1.672 degrees ! Estimated noise=1300.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844135 Jy ! Component: 100 - total flux cleaned = 0.0138318 Jy ! Component: 150 - total flux cleaned = 0.0181347 Jy ! Component: 200 - total flux cleaned = 0.0221865 Jy ! Total flux subtracted in 200 components = 0.0221865 Jy ! Clean residual min=-0.008599 max=0.006916 Jy/beam ! Clean residual mean=-0.000130 rms=0.002684 Jy/beam ! Combined flux in latest and established models = 0.160646 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249301 Jy ! Component: 100 - total flux cleaned = 0.00502002 Jy ! Component: 150 - total flux cleaned = 0.00729722 Jy ! Component: 200 - total flux cleaned = 0.0090164 Jy ! Total flux subtracted in 200 components = 0.0090164 Jy ! Clean residual min=-0.007348 max=0.006272 Jy/beam ! Clean residual mean=-0.000090 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.169662 Jy ! Adding 163 model components to the UV plane model. ! The established model now contains 277 components and 0.169663 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=24.63 mas, bpa=-15.85 degrees ! Estimated noise=1162.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138715 Jy ! Component: 100 - total flux cleaned = 0.00225044 Jy ! Component: 150 - total flux cleaned = 0.00320697 Jy ! Component: 200 - total flux cleaned = 0.00407943 Jy ! Total flux subtracted in 200 components = 0.00407943 Jy ! Clean residual min=-0.005351 max=0.004468 Jy/beam ! Clean residual mean=-0.000040 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.173742 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 316 components and 0.173742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097467Jy sigma=0.000700 ! Fit after self-cal, rms=0.097253Jy sigma=0.000698 wmodel J0317-2803_S_2017_10_21_pus_map.mod ! Writing 316 model components to file: J0317-2803_S_2017_10_21_pus_map.mod wobs J0317-2803_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0317-2803_S_2017_10_21_pus_uvs.fits wwins J0317-2803_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J0317-2803_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000893895 Jy ! Component: 100 - total flux cleaned = -0.00143646 Jy ! Component: 150 - total flux cleaned = -0.0013659 Jy ! Component: 200 - total flux cleaned = -0.00124479 Jy ! Component: 250 - total flux cleaned = -0.000906246 Jy ! Component: 300 - total flux cleaned = -0.000430324 Jy ! Component: 350 - total flux cleaned = 6.9619e-05 Jy ! Component: 400 - total flux cleaned = 0.000448942 Jy ! Component: 450 - total flux cleaned = 0.000853112 Jy ! Component: 500 - total flux cleaned = 0.00115191 Jy ! Component: 550 - total flux cleaned = 0.00143453 Jy ! Component: 600 - total flux cleaned = 0.00174406 Jy ! Component: 650 - total flux cleaned = 0.0020754 Jy ! Component: 700 - total flux cleaned = 0.00225147 Jy ! Component: 750 - total flux cleaned = 0.00238697 Jy ! Component: 800 - total flux cleaned = 0.00241814 Jy ! Component: 850 - total flux cleaned = 0.00235506 Jy ! Component: 900 - total flux cleaned = 0.00229516 Jy ! Component: 950 - total flux cleaned = 0.00235482 Jy ! Component: 1000 - total flux cleaned = 0.00224034 Jy ! Component: 1050 - total flux cleaned = 0.00215652 Jy ! Component: 1100 - total flux cleaned = 0.00204635 Jy ! Component: 1150 - total flux cleaned = 0.00188577 Jy ! Component: 1200 - total flux cleaned = 0.00178089 Jy ! Component: 1250 - total flux cleaned = 0.00165348 Jy ! Component: 1300 - total flux cleaned = 0.00157783 Jy ! Component: 1350 - total flux cleaned = 0.00147925 Jy ! Component: 1400 - total flux cleaned = 0.00140665 Jy ! Component: 1450 - total flux cleaned = 0.00133565 Jy ! Component: 1500 - total flux cleaned = 0.00121896 Jy ! Component: 1550 - total flux cleaned = 0.00105748 Jy ! Component: 1600 - total flux cleaned = 0.000874306 Jy ! Component: 1650 - total flux cleaned = 0.000715323 Jy ! Component: 1700 - total flux cleaned = 0.000556944 Jy ! Component: 1750 - total flux cleaned = 0.000376236 Jy ! Component: 1800 - total flux cleaned = 0.000150533 Jy ! Component: 1850 - total flux cleaned = -7.89841e-06 Jy ! Component: 1900 - total flux cleaned = -0.000190527 Jy ! Component: 1950 - total flux cleaned = -0.00037538 Jy ! Component: 2000 - total flux cleaned = -0.000492683 Jy ! Component: 2050 - total flux cleaned = -0.000611911 Jy ! Component: 2100 - total flux cleaned = -0.000733407 Jy ! Component: 2150 - total flux cleaned = -0.000832397 Jy ! Component: 2200 - total flux cleaned = -0.000958441 Jy ! Component: 2250 - total flux cleaned = -0.00106158 Jy ! Component: 2300 - total flux cleaned = -0.00111476 Jy ! Component: 2350 - total flux cleaned = -0.0011421 Jy ! Component: 2400 - total flux cleaned = -0.00108655 Jy ! Component: 2450 - total flux cleaned = -0.00108623 Jy ! Component: 2500 - total flux cleaned = -0.00105696 Jy ! Component: 2550 - total flux cleaned = -0.00105675 Jy ! Component: 2600 - total flux cleaned = -0.00105707 Jy ! Component: 2650 - total flux cleaned = -0.00108958 Jy ! Component: 2700 - total flux cleaned = -0.00108965 Jy ! Component: 2750 - total flux cleaned = -0.00108929 Jy ! Component: 2800 - total flux cleaned = -0.00108912 Jy ! Component: 2850 - total flux cleaned = -0.00112562 Jy ! Component: 2900 - total flux cleaned = -0.00116331 Jy ! Component: 2950 - total flux cleaned = -0.00120403 Jy ! Component: 3000 - total flux cleaned = -0.00120444 Jy ! Component: 3050 - total flux cleaned = -0.00120446 Jy ! Component: 3100 - total flux cleaned = -0.00124851 Jy ! Component: 3150 - total flux cleaned = -0.00124808 Jy ! Component: 3200 - total flux cleaned = -0.00124729 Jy ! Component: 3250 - total flux cleaned = -0.00129565 Jy ! Component: 3300 - total flux cleaned = -0.00129551 Jy ! Component: 3350 - total flux cleaned = -0.00134754 Jy ! Component: 3400 - total flux cleaned = -0.00134809 Jy ! Component: 3450 - total flux cleaned = -0.00134799 Jy ! Component: 3500 - total flux cleaned = -0.00140622 Jy ! Component: 3550 - total flux cleaned = -0.0014671 Jy ! Component: 3600 - total flux cleaned = -0.00159275 Jy ! Component: 3650 - total flux cleaned = -0.00159257 Jy ! Component: 3700 - total flux cleaned = -0.00172472 Jy ! Component: 3750 - total flux cleaned = -0.00186414 Jy ! Component: 3800 - total flux cleaned = -0.00193571 Jy ! Component: 3850 - total flux cleaned = -0.00208384 Jy ! Component: 3900 - total flux cleaned = -0.00216156 Jy ! Component: 3950 - total flux cleaned = -0.00224072 Jy ! Component: 4000 - total flux cleaned = -0.00232227 Jy ! Component: 4050 - total flux cleaned = -0.00257971 Jy ! Total flux subtracted in 4096 components = -0.00258026 Jy ! Clean residual min=-0.005237 max=0.004817 Jy/beam ! Clean residual mean=-0.000109 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.171162 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 583 components and 0.171162 Jy ![Exited script file: muppet] wmap "J0317-2803_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 24.63 at -15.85 degrees (North through East) ! Clean map min=-0.0083885 max=0.062688 Jy/beam ! Writing clean map to FITS file: J0317-2803_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0626878 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00165432 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.91693 7.91693 15.8339 31.6677 63.3354 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0049 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 24.63 at -15.85 degrees (North through East) ! Clean map min=-0.0083885 max=0.062688 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0317-2803_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:49:04 2019