! Started logfile: J0317-2803_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:29 2019 obs J0317-2803_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0317-2803_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.582953 visibilities/baseline/integration-bin. ! Found source: J0317-2803 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0317-2803_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 521 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1031 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969018Jy sigma=0.006780 ! Fit after self-cal, rms=0.931871Jy sigma=0.006560 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=20.68 mas, bpa=-9.658 degrees ! Estimated noise=1533.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546484 Jy ! Component: 100 - total flux cleaned = 0.0697965 Jy ! Total flux subtracted in 100 components = 0.0697965 Jy ! Clean residual min=-0.008155 max=0.010004 Jy/beam ! Clean residual mean=-0.000042 rms=0.002751 Jy/beam ! Combined flux in latest and established models = 0.0697965 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0697965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107443Jy sigma=0.000696 ! Fit after self-cal, rms=0.106735Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=22.28 mas, bpa=-9.331 degrees ! Estimated noise=1150.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116272 Jy ! Component: 100 - total flux cleaned = 0.0181014 Jy ! Component: 150 - total flux cleaned = 0.0220478 Jy ! Component: 200 - total flux cleaned = 0.0246908 Jy ! Total flux subtracted in 200 components = 0.0246908 Jy ! Clean residual min=-0.009565 max=0.012423 Jy/beam ! Clean residual mean=-0.000008 rms=0.003259 Jy/beam ! Combined flux in latest and established models = 0.0944874 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 96 components and 0.0944874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105470Jy sigma=0.000682 ! Fit after self-cal, rms=0.105395Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.92 HN 0.99 KP 1.06 ! LA 0.97 MK 1.18 NL 1.19 OV 1.00* ! PT 0.82 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.03 KP 0.96 ! LA 0.93 MK 1.02 NL 1.22 OV 1.00* ! PT 0.86 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.92 HN 1.02 KP 0.91 ! LA 0.77 MK 1.18 NL 1.36 OV 1.00* ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.06 KP 1.00* ! LA 1.00* MK 1.14 NL 1.00* OV 1.00* ! PT 0.71 ! ! ! Fit before self-cal, rms=0.105395Jy sigma=0.000681 ! Fit after self-cal, rms=0.108217Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=22.53 mas, bpa=-9.195 degrees ! Estimated noise=1155.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00336183 Jy ! Component: 100 - total flux cleaned = -0.00338374 Jy ! Component: 150 - total flux cleaned = -0.00338856 Jy ! Component: 200 - total flux cleaned = -0.00332522 Jy ! Total flux subtracted in 200 components = -0.00332522 Jy ! Clean residual min=-0.008119 max=0.011252 Jy/beam ! Clean residual mean=0.000048 rms=0.002794 Jy/beam ! Combined flux in latest and established models = 0.0911621 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 0.0911621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108064Jy sigma=0.000672 ! Fit after self-cal, rms=0.108726Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108726Jy sigma=0.000670 ! Fit after self-cal, rms=0.122292Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=22.79 mas, bpa=-9.254 degrees ! Estimated noise=1173.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000800342 Jy ! Component: 100 - total flux cleaned = -0.000969148 Jy ! Component: 150 - total flux cleaned = -0.00117003 Jy ! Component: 200 - total flux cleaned = -0.00130488 Jy ! Total flux subtracted in 200 components = -0.00130488 Jy ! Clean residual min=-0.006239 max=0.009976 Jy/beam ! Clean residual mean=0.000014 rms=0.002413 Jy/beam ! Combined flux in latest and established models = 0.0898573 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 122 components and 0.0898573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122210Jy sigma=0.000663 ! Fit after self-cal, rms=0.123552Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.41281e-05 Jy ! Component: 100 - total flux cleaned = 6.42376e-05 Jy ! Component: 150 - total flux cleaned = 0.000104355 Jy ! Component: 200 - total flux cleaned = 0.00017836 Jy ! Total flux subtracted in 200 components = 0.00017836 Jy ! Clean residual min=-0.005766 max=0.009820 Jy/beam ! Clean residual mean=0.000011 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 0.0900356 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 0.0900356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123510Jy sigma=0.000660 ! Fit after self-cal, rms=0.123552Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123552Jy sigma=0.000660 ! Fit after self-cal, rms=0.132211Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=23 mas, bpa=-9.3 degrees ! Estimated noise=1186.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000735289 Jy ! Component: 100 - total flux cleaned = -0.000946804 Jy ! Component: 150 - total flux cleaned = -0.00104302 Jy ! Component: 200 - total flux cleaned = -0.0011312 Jy ! Total flux subtracted in 200 components = -0.0011312 Jy ! Clean residual min=-0.005985 max=0.009483 Jy/beam ! Clean residual mean=0.000010 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.0889044 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 140 components and 0.0889044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132141Jy sigma=0.000660 ! Fit after self-cal, rms=0.132816Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220595 Jy ! Component: 100 - total flux cleaned = -0.000220422 Jy ! Component: 150 - total flux cleaned = -0.000260879 Jy ! Component: 200 - total flux cleaned = -0.000335298 Jy ! Total flux subtracted in 200 components = -0.000335298 Jy ! Clean residual min=-0.005797 max=0.009336 Jy/beam ! Clean residual mean=0.000006 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.0885691 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 147 components and 0.0885691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132776Jy sigma=0.000659 ! Fit after self-cal, rms=0.132801Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132801Jy sigma=0.000659 ! Fit after self-cal, rms=0.137668Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.48 mas, bmaj=28.18 mas, bpa=-0.6656 degrees ! Estimated noise=1338.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312493 Jy ! Component: 100 - total flux cleaned = -0.000469255 Jy ! Component: 150 - total flux cleaned = -0.000566293 Jy ! Component: 200 - total flux cleaned = -0.000651598 Jy ! Total flux subtracted in 200 components = -0.000651598 Jy ! Clean residual min=-0.007540 max=0.012718 Jy/beam ! Clean residual mean=0.000017 rms=0.003399 Jy/beam ! Combined flux in latest and established models = 0.0879175 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 153 components and 0.0879175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137660Jy sigma=0.000659 ! Fit after self-cal, rms=0.137970Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151953 Jy ! Component: 100 - total flux cleaned = -0.000271053 Jy ! Component: 150 - total flux cleaned = -0.000349776 Jy ! Component: 200 - total flux cleaned = -0.000384498 Jy ! Total flux subtracted in 200 components = -0.000384498 Jy ! Clean residual min=-0.007598 max=0.012778 Jy/beam ! Clean residual mean=0.000013 rms=0.003412 Jy/beam ! Combined flux in latest and established models = 0.087533 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 0.087533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137967Jy sigma=0.000659 ! Fit after self-cal, rms=0.137982Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=23.19 mas, bpa=-9.343 degrees ! Estimated noise=1193.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 23.19 at -9.343 degrees (North through East) ! Clean map min=-0.0066301 max=0.07406 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=21.61 mas, bpa=-9.62 degrees ! Estimated noise=1695.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568385 Jy ! Component: 100 - total flux cleaned = 0.0731605 Jy ! Component: 150 - total flux cleaned = 0.0806929 Jy ! Component: 200 - total flux cleaned = 0.0826888 Jy ! Total flux subtracted in 200 components = 0.0826888 Jy ! Clean residual min=-0.007348 max=0.009580 Jy/beam ! Clean residual mean=-0.000040 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.0826887 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0826887 Jy ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=23.19 mas, bpa=-9.343 degrees ! Estimated noise=1193.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520931 Jy ! Component: 100 - total flux cleaned = 0.00564184 Jy ! Component: 150 - total flux cleaned = 0.00564671 Jy ! Component: 200 - total flux cleaned = 0.00555969 Jy ! Total flux subtracted in 200 components = 0.00555969 Jy ! Clean residual min=-0.006281 max=0.009164 Jy/beam ! Clean residual mean=0.000005 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.0882484 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.0882484 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.48 mas, bmaj=28.18 mas, bpa=-0.6656 degrees ! Estimated noise=1338.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00083822 Jy ! Component: 100 - total flux cleaned = 0.000551896 Jy ! Component: 150 - total flux cleaned = 0.000380301 Jy ! Component: 200 - total flux cleaned = 0.00024181 Jy ! Total flux subtracted in 200 components = 0.00024181 Jy ! Clean residual min=-0.007724 max=0.012668 Jy/beam ! Clean residual mean=0.000015 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 0.0884902 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001183 Jy ! Component: 100 - total flux cleaned = -0.000260212 Jy ! Component: 150 - total flux cleaned = -0.000356724 Jy ! Component: 200 - total flux cleaned = -0.000443546 Jy ! Total flux subtracted in 200 components = -0.000443546 Jy ! Clean residual min=-0.007763 max=0.012770 Jy/beam ! Clean residual mean=0.000015 rms=0.003415 Jy/beam ! Combined flux in latest and established models = 0.0880467 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.0880467 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=23.19 mas, bpa=-9.343 degrees ! Estimated noise=1193.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000753424 Jy ! Component: 100 - total flux cleaned = -0.000854621 Jy ! Component: 150 - total flux cleaned = -0.000899674 Jy ! Component: 200 - total flux cleaned = -0.00090242 Jy ! Total flux subtracted in 200 components = -0.00090242 Jy ! Clean residual min=-0.006005 max=0.009221 Jy/beam ! Clean residual mean=0.000005 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.0871442 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.0871442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137931Jy sigma=0.000659 ! Fit after self-cal, rms=0.137924Jy sigma=0.000659 wmodel J0317-2803_S_2017_10_09_pus_map.mod ! Writing 89 model components to file: J0317-2803_S_2017_10_09_pus_map.mod wobs J0317-2803_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0317-2803_S_2017_10_09_pus_uvs.fits wwins J0317-2803_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0317-2803_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394401 Jy ! Component: 100 - total flux cleaned = 0.00725671 Jy ! Component: 150 - total flux cleaned = 0.0102427 Jy ! Component: 200 - total flux cleaned = 0.0129863 Jy ! Component: 250 - total flux cleaned = 0.0155327 Jy ! Component: 300 - total flux cleaned = 0.0179203 Jy ! Component: 350 - total flux cleaned = 0.0198984 Jy ! Component: 400 - total flux cleaned = 0.0216841 Jy ! Component: 450 - total flux cleaned = 0.0232215 Jy ! Component: 500 - total flux cleaned = 0.0241515 Jy ! Component: 550 - total flux cleaned = 0.0250452 Jy ! Component: 600 - total flux cleaned = 0.0259049 Jy ! Component: 650 - total flux cleaned = 0.0265941 Jy ! Component: 700 - total flux cleaned = 0.0271263 Jy ! Component: 750 - total flux cleaned = 0.0277036 Jy ! Component: 800 - total flux cleaned = 0.0280132 Jy ! Component: 850 - total flux cleaned = 0.0284341 Jy ! Component: 900 - total flux cleaned = 0.0287845 Jy ! Component: 950 - total flux cleaned = 0.0291252 Jy ! Component: 1000 - total flux cleaned = 0.0294573 Jy ! Component: 1050 - total flux cleaned = 0.0298872 Jy ! Component: 1100 - total flux cleaned = 0.0302534 Jy ! Component: 1150 - total flux cleaned = 0.0308161 Jy ! Component: 1200 - total flux cleaned = 0.0310668 Jy ! Component: 1250 - total flux cleaned = 0.0312629 Jy ! Component: 1300 - total flux cleaned = 0.0315518 Jy ! Component: 1350 - total flux cleaned = 0.0318338 Jy ! Component: 1400 - total flux cleaned = 0.0320185 Jy ! Component: 1450 - total flux cleaned = 0.0322456 Jy ! Component: 1500 - total flux cleaned = 0.032379 Jy ! Component: 1550 - total flux cleaned = 0.0325546 Jy ! Component: 1600 - total flux cleaned = 0.0327275 Jy ! Component: 1650 - total flux cleaned = 0.0328988 Jy ! Component: 1700 - total flux cleaned = 0.0331513 Jy ! Component: 1750 - total flux cleaned = 0.0332346 Jy ! Component: 1800 - total flux cleaned = 0.0333995 Jy ! Component: 1850 - total flux cleaned = 0.0336022 Jy ! Component: 1900 - total flux cleaned = 0.0336821 Jy ! Component: 1950 - total flux cleaned = 0.0338008 Jy ! Component: 2000 - total flux cleaned = 0.0339574 Jy ! Component: 2050 - total flux cleaned = 0.0339575 Jy ! Component: 2100 - total flux cleaned = 0.0340734 Jy ! Component: 2150 - total flux cleaned = 0.0340733 Jy ! Component: 2200 - total flux cleaned = 0.034111 Jy ! Component: 2250 - total flux cleaned = 0.0340736 Jy ! Component: 2300 - total flux cleaned = 0.0341108 Jy ! Component: 2350 - total flux cleaned = 0.0340738 Jy ! Component: 2400 - total flux cleaned = 0.0341105 Jy ! Component: 2450 - total flux cleaned = 0.0339641 Jy ! Component: 2500 - total flux cleaned = 0.0338186 Jy ! Component: 2550 - total flux cleaned = 0.0337099 Jy ! Component: 2600 - total flux cleaned = 0.0335653 Jy ! Component: 2650 - total flux cleaned = 0.0334573 Jy ! Component: 2700 - total flux cleaned = 0.0332413 Jy ! Component: 2750 - total flux cleaned = 0.0330618 Jy ! Component: 2800 - total flux cleaned = 0.0328466 Jy ! Component: 2850 - total flux cleaned = 0.0326675 Jy ! Component: 2900 - total flux cleaned = 0.0324887 Jy ! Component: 2950 - total flux cleaned = 0.0321669 Jy ! Component: 3000 - total flux cleaned = 0.0319519 Jy ! Component: 3050 - total flux cleaned = 0.0317375 Jy ! Component: 3100 - total flux cleaned = 0.031451 Jy ! Component: 3150 - total flux cleaned = 0.0312003 Jy ! Component: 3200 - total flux cleaned = 0.0309853 Jy ! Component: 3250 - total flux cleaned = 0.0308773 Jy ! Component: 3300 - total flux cleaned = 0.0309495 Jy ! Component: 3350 - total flux cleaned = 0.0309498 Jy ! Component: 3400 - total flux cleaned = 0.0308768 Jy ! Component: 3450 - total flux cleaned = 0.0309501 Jy ! Component: 3500 - total flux cleaned = 0.0309131 Jy ! Component: 3550 - total flux cleaned = 0.0308019 Jy ! Component: 3600 - total flux cleaned = 0.0309141 Jy ! Component: 3650 - total flux cleaned = 0.0309898 Jy ! Component: 3700 - total flux cleaned = 0.0308757 Jy ! Component: 3750 - total flux cleaned = 0.0310668 Jy ! Component: 3800 - total flux cleaned = 0.0310672 Jy ! Component: 3850 - total flux cleaned = 0.0311062 Jy ! Component: 3900 - total flux cleaned = 0.0310671 Jy ! Component: 3950 - total flux cleaned = 0.0311463 Jy ! Component: 4000 - total flux cleaned = 0.0311069 Jy ! Component: 4050 - total flux cleaned = 0.0310665 Jy ! Total flux subtracted in 4096 components = 0.031107 Jy ! Clean residual min=-0.002394 max=0.002225 Jy/beam ! Clean residual mean=0.000024 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.118251 Jy keep ! Adding 398 model components to the UV plane model. ! The established model now contains 487 components and 0.118251 Jy ![Exited script file: muppet] wmap "J0317-2803_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 23.19 at -9.343 degrees (North through East) ! Clean map min=-0.0055965 max=0.074938 Jy/beam ! Writing clean map to FITS file: J0317-2803_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0749376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000748437 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.99624 2.99624 5.99249 11.985 23.9699 47.9399 95.8798 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 23.19 at -9.343 degrees (North through East) ! Clean map min=-0.0055965 max=0.074938 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0317-2803_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:34 2019