! Started logfile: J0313+4120_S_2017_01_21_pus_uvs.log on Sun May 5 15:45:04 2019 obs J0313+4120_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0313+4120_S_2017_01_21_pus_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652778 visibilities/baseline/integration-bin. ! Found source: J0313+4120 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0313+4120_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.770187Jy sigma=0.005741 ! Fit after self-cal, rms=0.766554Jy sigma=0.005711 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.917 mas, bmaj=10.08 mas, bpa=-56.9 degrees ! Estimated noise=4062.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187394 Jy ! Component: 100 - total flux cleaned = 0.229777 Jy ! Total flux subtracted in 100 components = 0.229777 Jy ! Clean residual min=-0.018581 max=0.018429 Jy/beam ! Clean residual mean=-0.000010 rms=0.005193 Jy/beam ! Combined flux in latest and established models = 0.229777 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.229777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103658Jy sigma=0.000728 ! Fit after self-cal, rms=0.103689Jy sigma=0.000727 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=10.31 mas, bpa=-57.36 degrees ! Estimated noise=3255.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190028 Jy ! Component: 100 - total flux cleaned = 0.0309454 Jy ! Component: 150 - total flux cleaned = 0.0391931 Jy ! Component: 200 - total flux cleaned = 0.0450419 Jy ! Total flux subtracted in 200 components = 0.0450419 Jy ! Clean residual min=-0.017747 max=0.012431 Jy/beam ! Clean residual mean=-0.000134 rms=0.004059 Jy/beam ! Combined flux in latest and established models = 0.274819 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 62 components and 0.274819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099857Jy sigma=0.000695 ! Fit after self-cal, rms=0.099884Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.79 HN 1.01 LA 0.99 ! MK 0.99 NL 0.98 OV 0.99 PT 1.00 ! SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.79 HN 1.05 LA 1.01 ! MK 1.12 NL 1.04 OV 1.07 PT 0.97 ! SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.84 HN 1.06 LA 0.97 ! MK 1.02 NL 1.01 OV 0.96 PT 1.08 ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.81 HN 0.97 LA 1.12 ! MK 0.89 NL 1.00* OV 1.00 PT 1.04 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.099884Jy sigma=0.000695 ! Fit after self-cal, rms=0.096090Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=10.19 mas, bpa=-57.06 degrees ! Estimated noise=3246.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172103 Jy ! Component: 100 - total flux cleaned = 0.00171885 Jy ! Component: 150 - total flux cleaned = 0.00161902 Jy ! Component: 200 - total flux cleaned = 0.00136858 Jy ! Total flux subtracted in 200 components = 0.00136858 Jy ! Clean residual min=-0.008107 max=0.006700 Jy/beam ! Clean residual mean=-0.000039 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.276188 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.276188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095770Jy sigma=0.000659 ! Fit after self-cal, rms=0.095824Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095824Jy sigma=0.000658 ! Fit after self-cal, rms=0.095352Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.597 mas, bmaj=10.17 mas, bpa=-57.04 degrees ! Estimated noise=3234.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391957 Jy ! Component: 100 - total flux cleaned = -0.000536227 Jy ! Component: 150 - total flux cleaned = -0.000655063 Jy ! Component: 200 - total flux cleaned = -0.000814648 Jy ! Total flux subtracted in 200 components = -0.000814648 Jy ! Clean residual min=-0.007852 max=0.006298 Jy/beam ! Clean residual mean=-0.000036 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.275373 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.275373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095257Jy sigma=0.000657 ! Fit after self-cal, rms=0.095226Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122982 Jy ! Component: 100 - total flux cleaned = -8.02112e-05 Jy ! Component: 150 - total flux cleaned = -0.000159472 Jy ! Component: 200 - total flux cleaned = -0.000194487 Jy ! Total flux subtracted in 200 components = -0.000194487 Jy ! Clean residual min=-0.007803 max=0.006235 Jy/beam ! Clean residual mean=-0.000035 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.275179 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.275179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095195Jy sigma=0.000657 ! Fit after self-cal, rms=0.095182Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095182Jy sigma=0.000657 ! Fit after self-cal, rms=0.095207Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=10.17 mas, bpa=-57 degrees ! Estimated noise=3229.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104737 Jy ! Component: 100 - total flux cleaned = -0.00116865 Jy ! Component: 150 - total flux cleaned = -0.00127707 Jy ! Component: 200 - total flux cleaned = -0.00137521 Jy ! Total flux subtracted in 200 components = -0.00137521 Jy ! Clean residual min=-0.007678 max=0.006370 Jy/beam ! Clean residual mean=-0.000035 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.273803 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.273803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095176Jy sigma=0.000657 ! Fit after self-cal, rms=0.095169Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130527 Jy ! Component: 100 - total flux cleaned = -0.000158635 Jy ! Component: 150 - total flux cleaned = -0.000159598 Jy ! Component: 200 - total flux cleaned = -0.000160076 Jy ! Total flux subtracted in 200 components = -0.000160076 Jy ! Clean residual min=-0.007639 max=0.006327 Jy/beam ! Clean residual mean=-0.000035 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.273643 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.273643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095155Jy sigma=0.000657 ! Fit after self-cal, rms=0.095148Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095148Jy sigma=0.000657 ! Fit after self-cal, rms=0.095292Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.42 mas, bmaj=11.9 mas, bpa=-79.54 degrees ! Estimated noise=3692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000625366 Jy ! Component: 100 - total flux cleaned = -0.000797132 Jy ! Component: 150 - total flux cleaned = -0.000943878 Jy ! Component: 200 - total flux cleaned = -0.000977239 Jy ! Total flux subtracted in 200 components = -0.000977239 Jy ! Clean residual min=-0.007264 max=0.006515 Jy/beam ! Clean residual mean=-0.000063 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.272666 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 113 components and 0.272666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095295Jy sigma=0.000656 ! Fit after self-cal, rms=0.095289Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000281007 Jy ! Component: 100 - total flux cleaned = -0.000282091 Jy ! Component: 150 - total flux cleaned = -0.000252557 Jy ! Component: 200 - total flux cleaned = -0.000252432 Jy ! Total flux subtracted in 200 components = -0.000252432 Jy ! Clean residual min=-0.007275 max=0.006526 Jy/beam ! Clean residual mean=-0.000061 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.272414 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 117 components and 0.272414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095297Jy sigma=0.000656 ! Fit after self-cal, rms=0.095287Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=10.17 mas, bpa=-56.98 degrees ! Estimated noise=3227.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.6 x 10.17 at -56.98 degrees (North through East) ! Clean map min=-0.0072042 max=0.23995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.93 mas, bmaj=9.872 mas, bpa=-56.54 degrees ! Estimated noise=3944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181733 Jy ! Component: 100 - total flux cleaned = 0.223227 Jy ! Component: 150 - total flux cleaned = 0.242048 Jy ! Component: 200 - total flux cleaned = 0.25343 Jy ! Total flux subtracted in 200 components = 0.25343 Jy ! Clean residual min=-0.009299 max=0.009641 Jy/beam ! Clean residual mean=0.000006 rms=0.002572 Jy/beam ! Combined flux in latest and established models = 0.25343 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.25343 Jy ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=10.17 mas, bpa=-56.98 degrees ! Estimated noise=3227.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721338 Jy ! Component: 100 - total flux cleaned = 0.0118231 Jy ! Component: 150 - total flux cleaned = 0.0149026 Jy ! Component: 200 - total flux cleaned = 0.0159687 Jy ! Total flux subtracted in 200 components = 0.0159687 Jy ! Clean residual min=-0.007667 max=0.006000 Jy/beam ! Clean residual mean=-0.000024 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.269399 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.269399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.42 mas, bmaj=11.9 mas, bpa=-79.54 degrees ! Estimated noise=3692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159294 Jy ! Component: 100 - total flux cleaned = 0.00202414 Jy ! Component: 150 - total flux cleaned = 0.00218681 Jy ! Component: 200 - total flux cleaned = 0.00228782 Jy ! Total flux subtracted in 200 components = 0.00228782 Jy ! Clean residual min=-0.007411 max=0.006375 Jy/beam ! Clean residual mean=-0.000056 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 0.271687 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.20807e-05 Jy ! Component: 100 - total flux cleaned = 0.000180638 Jy ! Component: 150 - total flux cleaned = 0.000261227 Jy ! Component: 200 - total flux cleaned = 0.000338449 Jy ! Total flux subtracted in 200 components = 0.000338449 Jy ! Clean residual min=-0.007317 max=0.006435 Jy/beam ! Clean residual mean=-0.000058 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.272025 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.272025 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=10.17 mas, bpa=-56.98 degrees ! Estimated noise=3227.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.1778e-05 Jy ! Component: 100 - total flux cleaned = -3.65574e-05 Jy ! Component: 150 - total flux cleaned = -3.5388e-05 Jy ! Component: 200 - total flux cleaned = -8.06152e-05 Jy ! Total flux subtracted in 200 components = -8.06152e-05 Jy ! Clean residual min=-0.007578 max=0.006248 Jy/beam ! Clean residual mean=-0.000033 rms=0.001824 Jy/beam ! Combined flux in latest and established models = 0.271945 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.271945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095271Jy sigma=0.000656 ! Fit after self-cal, rms=0.095261Jy sigma=0.000656 wmodel J0313+4120_S_2017_01_21_pus_map.mod ! Writing 69 model components to file: J0313+4120_S_2017_01_21_pus_map.mod wobs J0313+4120_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0313+4120_S_2017_01_21_pus_uvs.fits wwins J0313+4120_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0313+4120_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028613 Jy ! Component: 100 - total flux cleaned = -0.00364793 Jy ! Component: 150 - total flux cleaned = -0.00436704 Jy ! Component: 200 - total flux cleaned = -0.005525 Jy ! Component: 250 - total flux cleaned = -0.00644587 Jy ! Component: 300 - total flux cleaned = -0.00750225 Jy ! Component: 350 - total flux cleaned = -0.00842488 Jy ! Component: 400 - total flux cleaned = -0.00930949 Jy ! Component: 450 - total flux cleaned = -0.0103192 Jy ! Component: 500 - total flux cleaned = -0.0114417 Jy ! Component: 550 - total flux cleaned = -0.0123052 Jy ! Component: 600 - total flux cleaned = -0.0130008 Jy ! Component: 650 - total flux cleaned = -0.0138082 Jy ! Component: 700 - total flux cleaned = -0.0143938 Jy ! Component: 750 - total flux cleaned = -0.0150858 Jy ! Component: 800 - total flux cleaned = -0.0156346 Jy ! Component: 850 - total flux cleaned = -0.0162862 Jy ! Component: 900 - total flux cleaned = -0.0169235 Jy ! Component: 950 - total flux cleaned = -0.0173208 Jy ! Component: 1000 - total flux cleaned = -0.0176527 Jy ! Component: 1050 - total flux cleaned = -0.0180864 Jy ! Component: 1100 - total flux cleaned = -0.0182976 Jy ! Component: 1150 - total flux cleaned = -0.0185569 Jy ! Component: 1200 - total flux cleaned = -0.0187598 Jy ! Component: 1250 - total flux cleaned = -0.0189602 Jy ! Component: 1300 - total flux cleaned = -0.0192533 Jy ! Component: 1350 - total flux cleaned = -0.0193958 Jy ! Component: 1400 - total flux cleaned = -0.0196305 Jy ! Component: 1450 - total flux cleaned = -0.0196777 Jy ! Component: 1500 - total flux cleaned = -0.0199964 Jy ! Component: 1550 - total flux cleaned = -0.0199961 Jy ! Component: 1600 - total flux cleaned = -0.0200838 Jy ! Component: 1650 - total flux cleaned = -0.0201704 Jy ! Component: 1700 - total flux cleaned = -0.0203417 Jy ! Component: 1750 - total flux cleaned = -0.0206347 Jy ! Component: 1800 - total flux cleaned = -0.0207996 Jy ! Component: 1850 - total flux cleaned = -0.0209218 Jy ! Component: 1900 - total flux cleaned = -0.0211634 Jy ! Component: 1950 - total flux cleaned = -0.021323 Jy ! Component: 2000 - total flux cleaned = -0.0214811 Jy ! Component: 2050 - total flux cleaned = -0.0217155 Jy ! Component: 2100 - total flux cleaned = -0.0220248 Jy ! Component: 2150 - total flux cleaned = -0.022293 Jy ! Component: 2200 - total flux cleaned = -0.022445 Jy ! Component: 2250 - total flux cleaned = -0.0227466 Jy ! Component: 2300 - total flux cleaned = -0.0228959 Jy ! Component: 2350 - total flux cleaned = -0.0230814 Jy ! Component: 2400 - total flux cleaned = -0.0232657 Jy ! Component: 2450 - total flux cleaned = -0.0234854 Jy ! Component: 2500 - total flux cleaned = -0.0235946 Jy ! Component: 2550 - total flux cleaned = -0.0237034 Jy ! Component: 2600 - total flux cleaned = -0.0238114 Jy ! Component: 2650 - total flux cleaned = -0.0239186 Jy ! Component: 2700 - total flux cleaned = -0.0239541 Jy ! Component: 2750 - total flux cleaned = -0.0241659 Jy ! Component: 2800 - total flux cleaned = -0.0242362 Jy ! Component: 2850 - total flux cleaned = -0.0243413 Jy ! Component: 2900 - total flux cleaned = -0.0244808 Jy ! Component: 2950 - total flux cleaned = -0.0246891 Jy ! Component: 3000 - total flux cleaned = -0.0248276 Jy ! Component: 3050 - total flux cleaned = -0.0249655 Jy ! Component: 3100 - total flux cleaned = -0.0250689 Jy ! Component: 3150 - total flux cleaned = -0.0251717 Jy ! Component: 3200 - total flux cleaned = -0.0253081 Jy ! Component: 3250 - total flux cleaned = -0.0254103 Jy ! Component: 3300 - total flux cleaned = -0.0254786 Jy ! Component: 3350 - total flux cleaned = -0.0256145 Jy ! Component: 3400 - total flux cleaned = -0.0257503 Jy ! Component: 3450 - total flux cleaned = -0.0257842 Jy ! Component: 3500 - total flux cleaned = -0.0258521 Jy ! Component: 3550 - total flux cleaned = -0.0260219 Jy ! Component: 3600 - total flux cleaned = -0.0261914 Jy ! Component: 3650 - total flux cleaned = -0.026327 Jy ! Component: 3700 - total flux cleaned = -0.0265646 Jy ! Component: 3750 - total flux cleaned = -0.0267007 Jy ! Component: 3800 - total flux cleaned = -0.0268706 Jy ! Component: 3850 - total flux cleaned = -0.0269727 Jy ! Component: 3900 - total flux cleaned = -0.0272449 Jy ! Component: 3950 - total flux cleaned = -0.0273469 Jy ! Component: 4000 - total flux cleaned = -0.0275513 Jy ! Component: 4050 - total flux cleaned = -0.0277557 Jy ! Total flux subtracted in 4096 components = -0.0279263 Jy ! Clean residual min=-0.001950 max=0.001890 Jy/beam ! Clean residual mean=-0.000030 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.244018 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 291 components and 0.244018 Jy ![Exited script file: muppet] wmap "J0313+4120_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.6 x 10.17 at -56.98 degrees (North through East) ! Clean map min=-0.0038065 max=0.23874 Jy/beam ! Writing clean map to FITS file: J0313+4120_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.23874 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00055582 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.69844 0.69844 1.39688 2.79376 5.58752 11.175 22.3501 44.7002 89.4003 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.238 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.6 x 10.17 at -56.98 degrees (North through East) ! Clean map min=-0.0038065 max=0.23874 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0313+4120_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:45:09 2019