! Started logfile: J0313+4115_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:24 2019 obs J0313+4115_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0313+4115_S_2017_10_09_pus_uva.fits ! AN table 1: 219 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.584348 visibilities/baseline/integration-bin. ! Found source: J0313+4115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 18428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0313+4115_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 649 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 488 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1143 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971001Jy sigma=0.009463 ! Fit after self-cal, rms=0.948924Jy sigma=0.009278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=6.07 mas, bpa=-18.72 degrees ! Estimated noise=1095.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376002 Jy ! Component: 100 - total flux cleaned = 0.0476972 Jy ! Total flux subtracted in 100 components = 0.0476972 Jy ! Clean residual min=-0.004096 max=0.004765 Jy/beam ! Clean residual mean=0.000007 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0476972 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0476972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078431Jy sigma=0.000644 ! Fit after self-cal, rms=0.078021Jy sigma=0.000641 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=7.137 mas, bpa=-21.42 degrees ! Estimated noise=645.892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786328 Jy ! Component: 100 - total flux cleaned = 0.01108 Jy ! Component: 150 - total flux cleaned = 0.0126139 Jy ! Component: 200 - total flux cleaned = 0.0134554 Jy ! Total flux subtracted in 200 components = 0.0134554 Jy ! Clean residual min=-0.002127 max=0.002340 Jy/beam ! Clean residual mean=-0.000006 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0611526 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.0611526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077229Jy sigma=0.000634 ! Fit after self-cal, rms=0.077166Jy sigma=0.000633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.09 KP 1.09 ! LA 1.05 MK 1.06 NL 0.86 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 1.10 KP 0.98 ! LA 0.98 MK 0.98 NL 1.40 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 1.15 KP 0.88 ! LA 0.85 MK 1.07 NL 1.04 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 267 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.01 KP 1.00* ! LA 0.77 MK 0.84 NL 1.00* OV 1.00* ! PT 1.04 ! ! ! Fit before self-cal, rms=0.077166Jy sigma=0.000633 ! Fit after self-cal, rms=0.075502Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.253 mas, bmaj=7.149 mas, bpa=-20.3 degrees ! Estimated noise=658.828 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291895 Jy ! Component: 100 - total flux cleaned = 0.000217286 Jy ! Component: 150 - total flux cleaned = 0.000192485 Jy ! Component: 200 - total flux cleaned = 0.000192662 Jy ! Total flux subtracted in 200 components = 0.000192662 Jy ! Clean residual min=-0.001853 max=0.001867 Jy/beam ! Clean residual mean=-0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0613452 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0613452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075496Jy sigma=0.000632 ! Fit after self-cal, rms=0.075375Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075375Jy sigma=0.000632 ! Fit after self-cal, rms=0.072995Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.227 mas, bmaj=7.14 mas, bpa=-20.09 degrees ! Estimated noise=656.129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269308 Jy ! Component: 100 - total flux cleaned = 0.000269564 Jy ! Component: 150 - total flux cleaned = 0.000281108 Jy ! Component: 200 - total flux cleaned = 0.000302469 Jy ! Total flux subtracted in 200 components = 0.000302469 Jy ! Clean residual min=-0.001507 max=0.001868 Jy/beam ! Clean residual mean=0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0616477 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.0616477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072990Jy sigma=0.000630 ! Fit after self-cal, rms=0.072964Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164725 Jy ! Component: 100 - total flux cleaned = 0.0020956 Jy ! Component: 150 - total flux cleaned = 0.0021925 Jy ! Component: 200 - total flux cleaned = 0.00235873 Jy ! Total flux subtracted in 200 components = 0.00235873 Jy ! Clean residual min=-0.001514 max=0.001416 Jy/beam ! Clean residual mean=0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0640064 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 59 components and 0.0640064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072926Jy sigma=0.000630 ! Fit after self-cal, rms=0.072915Jy sigma=0.000630 ! Inverting map ! Added new window around map position (5.5, 62). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103429 Jy ! Component: 100 - total flux cleaned = 0.00126087 Jy ! Component: 150 - total flux cleaned = 0.00141513 Jy ! Component: 200 - total flux cleaned = 0.0016012 Jy ! Total flux subtracted in 200 components = 0.0016012 Jy ! Clean residual min=-0.001395 max=0.001305 Jy/beam ! Clean residual mean=0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.0656076 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 75 components and 0.0656076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072878Jy sigma=0.000629 ! Fit after self-cal, rms=0.072867Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072867Jy sigma=0.000629 ! Fit after self-cal, rms=0.072086Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.208 mas, bmaj=7.113 mas, bpa=-20.03 degrees ! Estimated noise=650.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840377 Jy ! Component: 100 - total flux cleaned = 0.00104688 Jy ! Component: 150 - total flux cleaned = 0.00120077 Jy ! Component: 200 - total flux cleaned = 0.00131435 Jy ! Total flux subtracted in 200 components = 0.00131435 Jy ! Clean residual min=-0.001390 max=0.001340 Jy/beam ! Clean residual mean=0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.066922 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.066922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072063Jy sigma=0.000629 ! Fit after self-cal, rms=0.072038Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272168 Jy ! Component: 100 - total flux cleaned = 0.000370436 Jy ! Component: 150 - total flux cleaned = 0.00043725 Jy ! Component: 200 - total flux cleaned = 0.00051846 Jy ! Total flux subtracted in 200 components = 0.00051846 Jy ! Clean residual min=-0.001400 max=0.001366 Jy/beam ! Clean residual mean=0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0674405 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.0674405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072024Jy sigma=0.000629 ! Fit after self-cal, rms=0.072017Jy sigma=0.000628 ! Inverting map ! Added new window around map position (-58, -75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725089 Jy ! Component: 100 - total flux cleaned = 0.000860479 Jy ! Component: 150 - total flux cleaned = 0.00106937 Jy ! Component: 200 - total flux cleaned = 0.00125882 Jy ! Total flux subtracted in 200 components = 0.00125882 Jy ! Clean residual min=-0.001293 max=0.001101 Jy/beam ! Clean residual mean=0.000000 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.0686993 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.0686993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071980Jy sigma=0.000628 ! Fit after self-cal, rms=0.071967Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071967Jy sigma=0.000628 ! Fit after self-cal, rms=0.071639Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.033 mas, bmaj=9.818 mas, bpa=31.84 degrees ! Estimated noise=761.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459545 Jy ! Component: 100 - total flux cleaned = 0.000634604 Jy ! Component: 150 - total flux cleaned = 0.000767775 Jy ! Component: 200 - total flux cleaned = 0.000869664 Jy ! Total flux subtracted in 200 components = 0.000869664 Jy ! Clean residual min=-0.001315 max=0.001244 Jy/beam ! Clean residual mean=-0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0695689 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.0695689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071623Jy sigma=0.000628 ! Fit after self-cal, rms=0.071604Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318634 Jy ! Component: 100 - total flux cleaned = 0.000399502 Jy ! Component: 150 - total flux cleaned = 0.000494379 Jy ! Component: 200 - total flux cleaned = 0.00058315 Jy ! Total flux subtracted in 200 components = 0.00058315 Jy ! Clean residual min=-0.001293 max=0.001221 Jy/beam ! Clean residual mean=-0.000001 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0701521 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.0701521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071594Jy sigma=0.000628 ! Fit after self-cal, rms=0.071602Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.213 mas, bmaj=7.101 mas, bpa=-19.99 degrees ! Estimated noise=649.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.213 x 7.101 at -19.99 degrees (North through East) ! Clean map min=-0.0014113 max=0.050718 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=6.071 mas, bpa=-17.58 degrees ! Estimated noise=1058.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359666 Jy ! Component: 100 - total flux cleaned = 0.0470197 Jy ! Component: 150 - total flux cleaned = 0.05257 Jy ! Component: 200 - total flux cleaned = 0.0564592 Jy ! Total flux subtracted in 200 components = 0.0564592 Jy ! Clean residual min=-0.003208 max=0.002816 Jy/beam ! Clean residual mean=0.000004 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.0564592 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0564592 Jy ! Inverting map and beam ! Estimated beam: bmin=4.213 mas, bmaj=7.101 mas, bpa=-19.99 degrees ! Estimated noise=649.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483501 Jy ! Component: 100 - total flux cleaned = 0.00732986 Jy ! Component: 150 - total flux cleaned = 0.00861472 Jy ! Component: 200 - total flux cleaned = 0.00929643 Jy ! Total flux subtracted in 200 components = 0.00929643 Jy ! Clean residual min=-0.001749 max=0.001688 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0657556 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.0657556 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.033 mas, bmaj=9.818 mas, bpa=31.84 degrees ! Estimated noise=761.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105286 Jy ! Component: 100 - total flux cleaned = 0.00142547 Jy ! Component: 150 - total flux cleaned = 0.00180375 Jy ! Component: 200 - total flux cleaned = 0.00215059 Jy ! Total flux subtracted in 200 components = 0.00215059 Jy ! Clean residual min=-0.001685 max=0.001304 Jy/beam ! Clean residual mean=-0.000003 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0679062 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024674 Jy ! Component: 100 - total flux cleaned = 0.000477406 Jy ! Component: 150 - total flux cleaned = 0.000692556 Jy ! Component: 200 - total flux cleaned = 0.000892706 Jy ! Total flux subtracted in 200 components = 0.000892706 Jy ! Clean residual min=-0.001543 max=0.001260 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0687989 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 83 components and 0.0687989 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.213 mas, bmaj=7.101 mas, bpa=-19.99 degrees ! Estimated noise=649.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243317 Jy ! Component: 100 - total flux cleaned = 0.00040299 Jy ! Component: 150 - total flux cleaned = 0.000581313 Jy ! Component: 200 - total flux cleaned = 0.000741942 Jy ! Total flux subtracted in 200 components = 0.000741942 Jy ! Clean residual min=-0.001405 max=0.001163 Jy/beam ! Clean residual mean=-0.000001 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0695409 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 101 components and 0.0695409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071620Jy sigma=0.000628 ! Fit after self-cal, rms=0.071611Jy sigma=0.000628 wmodel J0313+4115_S_2017_10_09_pus_map.mod ! Writing 101 model components to file: J0313+4115_S_2017_10_09_pus_map.mod wobs J0313+4115_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0313+4115_S_2017_10_09_pus_uvs.fits wwins J0313+4115_S_2017_10_09_pus_map.win ! wwins: Wrote 4 windows to J0313+4115_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000610285 Jy ! Component: 100 - total flux cleaned = -0.00109453 Jy ! Component: 150 - total flux cleaned = -0.0014006 Jy ! Component: 200 - total flux cleaned = -0.00165229 Jy ! Component: 250 - total flux cleaned = -0.00187504 Jy ! Component: 300 - total flux cleaned = -0.00203606 Jy ! Component: 350 - total flux cleaned = -0.00212273 Jy ! Component: 400 - total flux cleaned = -0.00224166 Jy ! Component: 450 - total flux cleaned = -0.00237443 Jy ! Component: 500 - total flux cleaned = -0.0025204 Jy ! Component: 550 - total flux cleaned = -0.0026792 Jy ! Component: 600 - total flux cleaned = -0.00280383 Jy ! Component: 650 - total flux cleaned = -0.0028803 Jy ! Component: 700 - total flux cleaned = -0.00298546 Jy ! Component: 750 - total flux cleaned = -0.00305932 Jy ! Component: 800 - total flux cleaned = -0.00313206 Jy ! Component: 850 - total flux cleaned = -0.00324649 Jy ! Component: 900 - total flux cleaned = -0.00334514 Jy ! Component: 950 - total flux cleaned = -0.00342819 Jy ! Component: 1000 - total flux cleaned = -0.00352387 Jy ! Component: 1050 - total flux cleaned = -0.00360493 Jy ! Component: 1100 - total flux cleaned = -0.00373812 Jy ! Component: 1150 - total flux cleaned = -0.00382996 Jy ! Component: 1200 - total flux cleaned = -0.0039207 Jy ! Component: 1250 - total flux cleaned = -0.00399765 Jy ! Component: 1300 - total flux cleaned = -0.00406109 Jy ! Component: 1350 - total flux cleaned = -0.00417397 Jy ! Component: 1400 - total flux cleaned = -0.00424824 Jy ! Component: 1450 - total flux cleaned = -0.00433397 Jy ! Component: 1500 - total flux cleaned = -0.0043826 Jy ! Component: 1550 - total flux cleaned = -0.0044786 Jy ! Component: 1600 - total flux cleaned = -0.00450231 Jy ! Component: 1650 - total flux cleaned = -0.00457305 Jy ! Component: 1700 - total flux cleaned = -0.00464288 Jy ! Component: 1750 - total flux cleaned = -0.00465436 Jy ! Component: 1800 - total flux cleaned = -0.00471162 Jy ! Component: 1850 - total flux cleaned = -0.00475704 Jy ! Component: 1900 - total flux cleaned = -0.00476832 Jy ! Component: 1950 - total flux cleaned = -0.0047907 Jy ! Component: 2000 - total flux cleaned = -0.00480178 Jy ! Component: 2050 - total flux cleaned = -0.00482376 Jy ! Component: 2100 - total flux cleaned = -0.00485647 Jy ! Component: 2150 - total flux cleaned = -0.00485645 Jy ! Component: 2200 - total flux cleaned = -0.00486719 Jy ! Component: 2250 - total flux cleaned = -0.00489907 Jy ! Component: 2300 - total flux cleaned = -0.00490957 Jy ! Component: 2350 - total flux cleaned = -0.00490962 Jy ! Component: 2400 - total flux cleaned = -0.00490961 Jy ! Component: 2450 - total flux cleaned = -0.00490963 Jy ! Component: 2500 - total flux cleaned = -0.00494041 Jy ! Component: 2550 - total flux cleaned = -0.00496076 Jy ! Component: 2600 - total flux cleaned = -0.00496062 Jy ! Component: 2650 - total flux cleaned = -0.00494049 Jy ! Component: 2700 - total flux cleaned = -0.00494052 Jy ! Component: 2750 - total flux cleaned = -0.0049208 Jy ! Component: 2800 - total flux cleaned = -0.00491095 Jy ! Component: 2850 - total flux cleaned = -0.00491102 Jy ! Component: 2900 - total flux cleaned = -0.00493055 Jy ! Component: 2950 - total flux cleaned = -0.00491103 Jy ! Component: 3000 - total flux cleaned = -0.00490142 Jy ! Component: 3050 - total flux cleaned = -0.00487278 Jy ! Component: 3100 - total flux cleaned = -0.00487276 Jy ! Component: 3150 - total flux cleaned = -0.00486327 Jy ! Component: 3200 - total flux cleaned = -0.00485382 Jy ! Component: 3250 - total flux cleaned = -0.00483505 Jy ! Component: 3300 - total flux cleaned = -0.00483508 Jy ! Component: 3350 - total flux cleaned = -0.00480726 Jy ! Component: 3400 - total flux cleaned = -0.00479798 Jy ! Component: 3450 - total flux cleaned = -0.00475214 Jy ! Component: 3500 - total flux cleaned = -0.00473388 Jy ! Component: 3550 - total flux cleaned = -0.00472481 Jy ! Component: 3600 - total flux cleaned = -0.0046977 Jy ! Component: 3650 - total flux cleaned = -0.00468869 Jy ! Component: 3700 - total flux cleaned = -0.00467968 Jy ! Component: 3750 - total flux cleaned = -0.00465288 Jy ! Component: 3800 - total flux cleaned = -0.00463512 Jy ! Component: 3850 - total flux cleaned = -0.0046086 Jy ! Component: 3900 - total flux cleaned = -0.00459978 Jy ! Component: 3950 - total flux cleaned = -0.00456472 Jy ! Component: 4000 - total flux cleaned = -0.0045036 Jy ! Component: 4050 - total flux cleaned = -0.00449494 Jy ! Total flux subtracted in 4096 components = -0.00448626 Jy ! Clean residual min=-0.000532 max=0.000517 Jy/beam ! Clean residual mean=0.000002 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0650546 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 361 components and 0.0650546 Jy ![Exited script file: muppet] wmap "J0313+4115_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.213 x 7.101 at -19.99 degrees (North through East) ! Clean map min=-0.0013886 max=0.049965 Jy/beam ! Writing clean map to FITS file: J0313+4115_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0499648 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148455 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.891357 0.891357 1.78271 3.56543 7.13086 14.2617 28.5234 57.0468 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.213 x 7.101 at -19.99 degrees (North through East) ! Clean map min=-0.0013886 max=0.049965 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0313+4115_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:29 2019