! Started logfile: J0312+3615_S_2017_08_12_pus_uvs.log on Fri May 10 14:50:56 2019 obs J0312+3615_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0312+3615_S_2017_08_12_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.824975 visibilities/baseline/integration-bin. ! Found source: J0312+3615 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 16780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0312+3615_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 749 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975914Jy sigma=0.009935 ! Fit after self-cal, rms=0.959795Jy sigma=0.009790 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=5.383 mas, bpa=-2.355 degrees ! Estimated noise=888.717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312078 Jy ! Component: 100 - total flux cleaned = 0.0386178 Jy ! Total flux subtracted in 100 components = 0.0386178 Jy ! Clean residual min=-0.002540 max=0.003162 Jy/beam ! Clean residual mean=0.000001 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0386178 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0386178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069359Jy sigma=0.000655 ! Fit after self-cal, rms=0.069031Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=6.381 mas, bpa=-1.98 degrees ! Estimated noise=633.436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504186 Jy ! Component: 100 - total flux cleaned = 0.00752885 Jy ! Component: 150 - total flux cleaned = 0.0089202 Jy ! Component: 200 - total flux cleaned = 0.0097217 Jy ! Total flux subtracted in 200 components = 0.0097217 Jy ! Clean residual min=-0.002209 max=0.001782 Jy/beam ! Clean residual mean=0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0483395 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.0483395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068647Jy sigma=0.000649 ! Fit after self-cal, rms=0.068633Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.15 KP 1.03 ! LA 0.96 MK 1.01 NL 0.90 OV 1.02 ! PT 1.09 SC 1.04 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.11 KP 0.91 ! LA 1.01 MK 1.04 NL 1.09 OV 1.01 ! PT 1.12 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 1.06 KP 0.92 ! LA 0.99 MK 1.08 NL 1.04 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.77 KP 1.00* ! LA 0.81 MK 0.76 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.068633Jy sigma=0.000648 ! Fit after self-cal, rms=0.069035Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=6.365 mas, bpa=-2.093 degrees ! Estimated noise=639.827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759029 Jy ! Component: 100 - total flux cleaned = 0.00098768 Jy ! Component: 150 - total flux cleaned = 0.00103051 Jy ! Component: 200 - total flux cleaned = 0.00105453 Jy ! Total flux subtracted in 200 components = 0.00105453 Jy ! Clean residual min=-0.002251 max=0.001778 Jy/beam ! Clean residual mean=0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0493941 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0493941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069022Jy sigma=0.000647 ! Fit after self-cal, rms=0.069005Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069005Jy sigma=0.000647 ! Fit after self-cal, rms=0.068166Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=6.392 mas, bpa=-2.035 degrees ! Estimated noise=644.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127811 Jy ! Component: 100 - total flux cleaned = 0.000139484 Jy ! Component: 150 - total flux cleaned = 0.000149814 Jy ! Component: 200 - total flux cleaned = 0.000159247 Jy ! Total flux subtracted in 200 components = 0.000159247 Jy ! Clean residual min=-0.001664 max=0.001575 Jy/beam ! Clean residual mean=0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0495533 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.0495533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068162Jy sigma=0.000645 ! Fit after self-cal, rms=0.068171Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.37926e-05 Jy ! Component: 100 - total flux cleaned = 3.46783e-05 Jy ! Component: 150 - total flux cleaned = 4.44565e-05 Jy ! Component: 200 - total flux cleaned = 5.34645e-05 Jy ! Total flux subtracted in 200 components = 5.34645e-05 Jy ! Clean residual min=-0.001781 max=0.001563 Jy/beam ! Clean residual mean=0.000001 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0496068 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0496068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068166Jy sigma=0.000645 ! Fit after self-cal, rms=0.068167Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068167Jy sigma=0.000645 ! Fit after self-cal, rms=0.068361Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=6.381 mas, bpa=-2.071 degrees ! Estimated noise=645.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100973 Jy ! Component: 100 - total flux cleaned = 0.000100859 Jy ! Component: 150 - total flux cleaned = 0.000119348 Jy ! Component: 200 - total flux cleaned = 0.000119221 Jy ! Total flux subtracted in 200 components = 0.000119221 Jy ! Clean residual min=-0.001681 max=0.001590 Jy/beam ! Clean residual mean=0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.049726 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.049726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068357Jy sigma=0.000645 ! Fit after self-cal, rms=0.068371Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26732e-05 Jy ! Component: 100 - total flux cleaned = -4.15039e-06 Jy ! Component: 150 - total flux cleaned = 3.81634e-06 Jy ! Component: 200 - total flux cleaned = 3.88499e-06 Jy ! Total flux subtracted in 200 components = 3.88499e-06 Jy ! Clean residual min=-0.001713 max=0.001580 Jy/beam ! Clean residual mean=0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0497299 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0497299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068368Jy sigma=0.000645 ! Fit after self-cal, rms=0.068365Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068365Jy sigma=0.000645 ! Fit after self-cal, rms=0.068403Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=9.762 mas, bpa=-1.501 degrees ! Estimated noise=781.949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266624 Jy ! Component: 100 - total flux cleaned = 0.000278817 Jy ! Component: 150 - total flux cleaned = 0.000293682 Jy ! Component: 200 - total flux cleaned = 0.000302171 Jy ! Total flux subtracted in 200 components = 0.000302171 Jy ! Clean residual min=-0.001734 max=0.001682 Jy/beam ! Clean residual mean=0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.050032 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0500321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068402Jy sigma=0.000645 ! Fit after self-cal, rms=0.068405Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.15282e-05 Jy ! Component: 100 - total flux cleaned = 3.14111e-05 Jy ! Component: 150 - total flux cleaned = 3.14445e-05 Jy ! Component: 200 - total flux cleaned = 3.15496e-05 Jy ! Total flux subtracted in 200 components = 3.15496e-05 Jy ! Clean residual min=-0.001722 max=0.001677 Jy/beam ! Clean residual mean=0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0500636 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0500636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068404Jy sigma=0.000644 ! Fit after self-cal, rms=0.068404Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=6.362 mas, bpa=-2.134 degrees ! Estimated noise=645.062 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 6.362 at -2.134 degrees (North through East) ! Clean map min=-0.0016153 max=0.042052 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=5.395 mas, bpa=-2.771 degrees ! Estimated noise=897.306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315305 Jy ! Component: 100 - total flux cleaned = 0.0392155 Jy ! Component: 150 - total flux cleaned = 0.0432171 Jy ! Component: 200 - total flux cleaned = 0.0457467 Jy ! Total flux subtracted in 200 components = 0.0457467 Jy ! Clean residual min=-0.002390 max=0.002321 Jy/beam ! Clean residual mean=0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0457467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0457467 Jy ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=6.362 mas, bpa=-2.134 degrees ! Estimated noise=645.062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228616 Jy ! Component: 100 - total flux cleaned = 0.00346476 Jy ! Component: 150 - total flux cleaned = 0.00368717 Jy ! Component: 200 - total flux cleaned = 0.00376165 Jy ! Total flux subtracted in 200 components = 0.00376165 Jy ! Clean residual min=-0.001663 max=0.001592 Jy/beam ! Clean residual mean=0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0495083 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.0495083 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=9.762 mas, bpa=-1.501 degrees ! Estimated noise=781.949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047285 Jy ! Component: 100 - total flux cleaned = 0.000516735 Jy ! Component: 150 - total flux cleaned = 0.000528042 Jy ! Component: 200 - total flux cleaned = 0.000536788 Jy ! Total flux subtracted in 200 components = 0.000536788 Jy ! Clean residual min=-0.001728 max=0.001664 Jy/beam ! Clean residual mean=0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0500451 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.5025e-06 Jy ! Component: 100 - total flux cleaned = 3.47814e-06 Jy ! Component: 150 - total flux cleaned = 3.58668e-06 Jy ! Component: 200 - total flux cleaned = 3.87139e-06 Jy ! Total flux subtracted in 200 components = 3.87139e-06 Jy ! Clean residual min=-0.001726 max=0.001662 Jy/beam ! Clean residual mean=0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.050049 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.050049 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=6.362 mas, bpa=-2.134 degrees ! Estimated noise=645.062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.02546e-05 Jy ! Component: 100 - total flux cleaned = -8.35944e-05 Jy ! Component: 150 - total flux cleaned = -9.82263e-05 Jy ! Component: 200 - total flux cleaned = -0.000124355 Jy ! Total flux subtracted in 200 components = -0.000124355 Jy ! Clean residual min=-0.001702 max=0.001635 Jy/beam ! Clean residual mean=0.000002 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0499246 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.0499246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068412Jy sigma=0.000645 ! Fit after self-cal, rms=0.068407Jy sigma=0.000645 wmodel J0312+3615_S_2017_08_12_pus_map.mod ! Writing 64 model components to file: J0312+3615_S_2017_08_12_pus_map.mod wobs J0312+3615_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0312+3615_S_2017_08_12_pus_uvs.fits wwins J0312+3615_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0312+3615_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243163 Jy ! Component: 100 - total flux cleaned = -0.000439697 Jy ! Component: 150 - total flux cleaned = -0.000386153 Jy ! Component: 200 - total flux cleaned = -0.000257249 Jy ! Component: 250 - total flux cleaned = -3.09847e-05 Jy ! Component: 300 - total flux cleaned = 0.000189808 Jy ! Component: 350 - total flux cleaned = 0.000333829 Jy ! Component: 400 - total flux cleaned = 0.00047531 Jy ! Component: 450 - total flux cleaned = 0.000591214 Jy ! Component: 500 - total flux cleaned = 0.000772466 Jy ! Component: 550 - total flux cleaned = 0.000905836 Jy ! Component: 600 - total flux cleaned = 0.000971435 Jy ! Component: 650 - total flux cleaned = 0.00112179 Jy ! Component: 700 - total flux cleaned = 0.00122748 Jy ! Component: 750 - total flux cleaned = 0.00133176 Jy ! Component: 800 - total flux cleaned = 0.00143444 Jy ! Component: 850 - total flux cleaned = 0.00149521 Jy ! Component: 900 - total flux cleaned = 0.00155507 Jy ! Component: 950 - total flux cleaned = 0.00161406 Jy ! Component: 1000 - total flux cleaned = 0.0016143 Jy ! Component: 1050 - total flux cleaned = 0.00178691 Jy ! Component: 1100 - total flux cleaned = 0.00184345 Jy ! Component: 1150 - total flux cleaned = 0.00186197 Jy ! Component: 1200 - total flux cleaned = 0.00199156 Jy ! Component: 1250 - total flux cleaned = 0.00206427 Jy ! Component: 1300 - total flux cleaned = 0.00208222 Jy ! Component: 1350 - total flux cleaned = 0.00218931 Jy ! Component: 1400 - total flux cleaned = 0.00220709 Jy ! Component: 1450 - total flux cleaned = 0.00234672 Jy ! Component: 1500 - total flux cleaned = 0.00239812 Jy ! Component: 1550 - total flux cleaned = 0.00243224 Jy ! Component: 1600 - total flux cleaned = 0.00246608 Jy ! Component: 1650 - total flux cleaned = 0.00254964 Jy ! Component: 1700 - total flux cleaned = 0.00261571 Jy ! Component: 1750 - total flux cleaned = 0.00266454 Jy ! Component: 1800 - total flux cleaned = 0.00274546 Jy ! Component: 1850 - total flux cleaned = 0.00282549 Jy ! Component: 1900 - total flux cleaned = 0.00288894 Jy ! Component: 1950 - total flux cleaned = 0.00288898 Jy ! Component: 2000 - total flux cleaned = 0.0030133 Jy ! Component: 2050 - total flux cleaned = 0.00302871 Jy ! Component: 2100 - total flux cleaned = 0.00307461 Jy ! Component: 2150 - total flux cleaned = 0.00315016 Jy ! Component: 2200 - total flux cleaned = 0.00312016 Jy ! Component: 2250 - total flux cleaned = 0.00325375 Jy ! Component: 2300 - total flux cleaned = 0.00328298 Jy ! Component: 2350 - total flux cleaned = 0.00332662 Jy ! Component: 2400 - total flux cleaned = 0.00337005 Jy ! Component: 2450 - total flux cleaned = 0.00335579 Jy ! Component: 2500 - total flux cleaned = 0.00346959 Jy ! Component: 2550 - total flux cleaned = 0.00351185 Jy ! Component: 2600 - total flux cleaned = 0.00355398 Jy ! Component: 2650 - total flux cleaned = 0.00360959 Jy ! Component: 2700 - total flux cleaned = 0.00362341 Jy ! Component: 2750 - total flux cleaned = 0.00363723 Jy ! Component: 2800 - total flux cleaned = 0.00367774 Jy ! Component: 2850 - total flux cleaned = 0.00367781 Jy ! Component: 2900 - total flux cleaned = 0.00374469 Jy ! Component: 2950 - total flux cleaned = 0.00374463 Jy ! Component: 3000 - total flux cleaned = 0.00374475 Jy ! Component: 3050 - total flux cleaned = 0.00377088 Jy ! Component: 3100 - total flux cleaned = 0.00374501 Jy ! Component: 3150 - total flux cleaned = 0.00373216 Jy ! Component: 3200 - total flux cleaned = 0.00374515 Jy ! Component: 3250 - total flux cleaned = 0.0037835 Jy ! Component: 3300 - total flux cleaned = 0.00374542 Jy ! Component: 3350 - total flux cleaned = 0.00378322 Jy ! Component: 3400 - total flux cleaned = 0.00378324 Jy ! Component: 3450 - total flux cleaned = 0.0038329 Jy ! Component: 3500 - total flux cleaned = 0.00383269 Jy ! Component: 3550 - total flux cleaned = 0.00382035 Jy ! Component: 3600 - total flux cleaned = 0.00384466 Jy ! Component: 3650 - total flux cleaned = 0.0038325 Jy ! Component: 3700 - total flux cleaned = 0.00385666 Jy ! Component: 3750 - total flux cleaned = 0.00385655 Jy ! Component: 3800 - total flux cleaned = 0.0038686 Jy ! Component: 3850 - total flux cleaned = 0.00388041 Jy ! Component: 3900 - total flux cleaned = 0.00386865 Jy ! Component: 3950 - total flux cleaned = 0.00386853 Jy ! Component: 4000 - total flux cleaned = 0.00392678 Jy ! Component: 4050 - total flux cleaned = 0.0039152 Jy ! Total flux subtracted in 4096 components = 0.00396131 Jy ! Clean residual min=-0.000639 max=0.000914 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0538859 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 326 components and 0.053886 Jy ![Exited script file: muppet] wmap "J0312+3615_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 6.362 at -2.134 degrees (North through East) ! Clean map min=-0.0012238 max=0.041967 Jy/beam ! Writing clean map to FITS file: J0312+3615_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.041967 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208682 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.49176 1.49176 2.98352 5.96704 11.9341 23.8681 47.7363 95.4726 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 6.362 at -2.134 degrees (North through East) ! Clean map min=-0.0012238 max=0.041967 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0312+3615_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:51:00 2019