! Started logfile: J0310-0823_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:14 2019 obs J0310-0823_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0310-0823_S_2017_01_16_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.652507 visibilities/baseline/integration-bin. ! Found source: J0310-0823 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 13272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0310-0823_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 540 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934251Jy sigma=0.006595 ! Fit after self-cal, rms=0.912509Jy sigma=0.006485 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.584 mas, bmaj=9.689 mas, bpa=18.5 degrees ! Estimated noise=1300.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706999 Jy ! Component: 100 - total flux cleaned = 0.0870198 Jy ! Total flux subtracted in 100 components = 0.0870198 Jy ! Clean residual min=-0.004212 max=0.006276 Jy/beam ! Clean residual mean=-0.000002 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0870198 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0870198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104834Jy sigma=0.000658 ! Fit after self-cal, rms=0.104700Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.285 mas, bmaj=10.89 mas, bpa=17.16 degrees ! Estimated noise=958.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803453 Jy ! Component: 100 - total flux cleaned = 0.0115774 Jy ! Component: 150 - total flux cleaned = 0.0135952 Jy ! Component: 200 - total flux cleaned = 0.014933 Jy ! Total flux subtracted in 200 components = 0.014933 Jy ! Clean residual min=-0.003258 max=0.003107 Jy/beam ! Clean residual mean=-0.000003 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.101953 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.101953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104127Jy sigma=0.000653 ! Fit after self-cal, rms=0.104095Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 1.06 KP 0.98 ! LA 1.01 MK 1.00* NL 0.88 OV 1.01 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.07 KP 0.95 ! LA 0.98 MK 1.00* NL 1.01 OV 1.01 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.04 KP 0.98 ! LA 1.03 MK 1.00* NL 0.99 OV 0.93 ! PT 1.09 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.98 KP 0.92 ! LA 0.65 MK 1.00* NL 1.00* OV 0.93 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.104095Jy sigma=0.000653 ! Fit after self-cal, rms=0.102016Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.297 mas, bmaj=10.93 mas, bpa=17.18 degrees ! Estimated noise=952.906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223455 Jy ! Component: 100 - total flux cleaned = -0.000287984 Jy ! Component: 150 - total flux cleaned = -0.000342617 Jy ! Component: 200 - total flux cleaned = -0.000320616 Jy ! Total flux subtracted in 200 components = -0.000320616 Jy ! Clean residual min=-0.002651 max=0.002855 Jy/beam ! Clean residual mean=0.000001 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.101632 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.101632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102000Jy sigma=0.000650 ! Fit after self-cal, rms=0.102038Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102038Jy sigma=0.000650 ! Fit after self-cal, rms=0.105014Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=10.91 mas, bpa=16.86 degrees ! Estimated noise=953.758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487824 Jy ! Component: 100 - total flux cleaned = 0.00069765 Jy ! Component: 150 - total flux cleaned = 0.000743599 Jy ! Component: 200 - total flux cleaned = 0.000785821 Jy ! Total flux subtracted in 200 components = 0.000785821 Jy ! Clean residual min=-0.002072 max=0.002205 Jy/beam ! Clean residual mean=0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.102418 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.102418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105004Jy sigma=0.000648 ! Fit after self-cal, rms=0.105139Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.80861e-05 Jy ! Component: 100 - total flux cleaned = 1.86392e-05 Jy ! Component: 150 - total flux cleaned = 3.7266e-05 Jy ! Component: 200 - total flux cleaned = 5.46443e-05 Jy ! Total flux subtracted in 200 components = 5.46443e-05 Jy ! Clean residual min=-0.002026 max=0.002130 Jy/beam ! Clean residual mean=0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.102473 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.102473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105133Jy sigma=0.000648 ! Fit after self-cal, rms=0.105131Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105131Jy sigma=0.000648 ! Fit after self-cal, rms=0.106066Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=10.9 mas, bpa=16.72 degrees ! Estimated noise=954.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288611 Jy ! Component: 100 - total flux cleaned = 0.000386862 Jy ! Component: 150 - total flux cleaned = 0.000404758 Jy ! Component: 200 - total flux cleaned = 0.000437881 Jy ! Total flux subtracted in 200 components = 0.000437881 Jy ! Clean residual min=-0.002041 max=0.002123 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.102911 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.102911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106060Jy sigma=0.000648 ! Fit after self-cal, rms=0.106088Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.0163e-06 Jy ! Component: 100 - total flux cleaned = 2.79544e-05 Jy ! Component: 150 - total flux cleaned = 4.2741e-05 Jy ! Component: 200 - total flux cleaned = 5.69162e-05 Jy ! Total flux subtracted in 200 components = 5.69162e-05 Jy ! Clean residual min=-0.002027 max=0.002085 Jy/beam ! Clean residual mean=0.000002 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.102968 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.102968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106085Jy sigma=0.000648 ! Fit after self-cal, rms=0.106083Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106083Jy sigma=0.000648 ! Fit after self-cal, rms=0.106376Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.832 mas, bmaj=13.79 mas, bpa=10.09 degrees ! Estimated noise=1107.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142331 Jy ! Component: 100 - total flux cleaned = -0.000119208 Jy ! Component: 150 - total flux cleaned = -6.49456e-05 Jy ! Component: 200 - total flux cleaned = -2.82614e-05 Jy ! Total flux subtracted in 200 components = -2.82614e-05 Jy ! Clean residual min=-0.002279 max=0.002706 Jy/beam ! Clean residual mean=0.000004 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.102939 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.102939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106377Jy sigma=0.000648 ! Fit after self-cal, rms=0.106382Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41383e-05 Jy ! Component: 100 - total flux cleaned = -8.40657e-05 Jy ! Component: 150 - total flux cleaned = -6.8302e-05 Jy ! Component: 200 - total flux cleaned = -6.1199e-05 Jy ! Total flux subtracted in 200 components = -6.1199e-05 Jy ! Clean residual min=-0.002251 max=0.002694 Jy/beam ! Clean residual mean=0.000004 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.102878 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.102878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106383Jy sigma=0.000648 ! Fit after self-cal, rms=0.106381Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=10.89 mas, bpa=16.62 degrees ! Estimated noise=954.483 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.299 x 10.89 at 16.62 degrees (North through East) ! Clean map min=-0.0019911 max=0.091387 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=9.699 mas, bpa=17.63 degrees ! Estimated noise=1290.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697907 Jy ! Component: 100 - total flux cleaned = 0.0868647 Jy ! Component: 150 - total flux cleaned = 0.0941874 Jy ! Component: 200 - total flux cleaned = 0.0982815 Jy ! Total flux subtracted in 200 components = 0.0982815 Jy ! Clean residual min=-0.003253 max=0.002903 Jy/beam ! Clean residual mean=0.000001 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0982816 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0982816 Jy ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=10.89 mas, bpa=16.62 degrees ! Estimated noise=954.483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270911 Jy ! Component: 100 - total flux cleaned = 0.00377133 Jy ! Component: 150 - total flux cleaned = 0.00409616 Jy ! Component: 200 - total flux cleaned = 0.00416654 Jy ! Total flux subtracted in 200 components = 0.00416654 Jy ! Clean residual min=-0.002065 max=0.002137 Jy/beam ! Clean residual mean=0.000002 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.102448 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.102448 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.832 mas, bmaj=13.79 mas, bpa=10.09 degrees ! Estimated noise=1107.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101207 Jy ! Component: 100 - total flux cleaned = 0.00014375 Jy ! Component: 150 - total flux cleaned = 0.000144762 Jy ! Component: 200 - total flux cleaned = 0.000161728 Jy ! Total flux subtracted in 200 components = 0.000161728 Jy ! Clean residual min=-0.002307 max=0.002774 Jy/beam ! Clean residual mean=0.000004 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.10261 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12163e-07 Jy ! Component: 100 - total flux cleaned = 1.41784e-05 Jy ! Component: 150 - total flux cleaned = 1.42795e-05 Jy ! Component: 200 - total flux cleaned = 2.588e-05 Jy ! Total flux subtracted in 200 components = 2.588e-05 Jy ! Clean residual min=-0.002273 max=0.002757 Jy/beam ! Clean residual mean=0.000004 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.102636 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.102636 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=10.89 mas, bpa=16.62 degrees ! Estimated noise=954.483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026268 Jy ! Component: 100 - total flux cleaned = 0.000318026 Jy ! Component: 150 - total flux cleaned = 0.000358906 Jy ! Component: 200 - total flux cleaned = 0.000377928 Jy ! Total flux subtracted in 200 components = 0.000377928 Jy ! Clean residual min=-0.002001 max=0.002041 Jy/beam ! Clean residual mean=0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.103014 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.103014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106384Jy sigma=0.000648 ! Fit after self-cal, rms=0.106382Jy sigma=0.000648 wmodel J0310-0823_S_2017_01_16_pus_map.mod ! Writing 59 model components to file: J0310-0823_S_2017_01_16_pus_map.mod wobs J0310-0823_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0310-0823_S_2017_01_16_pus_uvs.fits wwins J0310-0823_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0310-0823_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.37917e-05 Jy ! Component: 100 - total flux cleaned = -0.000306091 Jy ! Component: 150 - total flux cleaned = -0.000610299 Jy ! Component: 200 - total flux cleaned = -0.000970312 Jy ! Component: 250 - total flux cleaned = -0.00135031 Jy ! Component: 300 - total flux cleaned = -0.00162738 Jy ! Component: 350 - total flux cleaned = -0.00192626 Jy ! Component: 400 - total flux cleaned = -0.00221681 Jy ! Component: 450 - total flux cleaned = -0.00250042 Jy ! Component: 500 - total flux cleaned = -0.0027774 Jy ! Component: 550 - total flux cleaned = -0.00302097 Jy ! Component: 600 - total flux cleaned = -0.00328671 Jy ! Component: 650 - total flux cleaned = -0.00354683 Jy ! Component: 700 - total flux cleaned = -0.00372594 Jy ! Component: 750 - total flux cleaned = -0.00390164 Jy ! Component: 800 - total flux cleaned = -0.00409887 Jy ! Component: 850 - total flux cleaned = -0.00431637 Jy ! Component: 900 - total flux cleaned = -0.00445931 Jy ! Component: 950 - total flux cleaned = -0.00464646 Jy ! Component: 1000 - total flux cleaned = -0.00473826 Jy ! Component: 1050 - total flux cleaned = -0.00487373 Jy ! Component: 1100 - total flux cleaned = -0.00498456 Jy ! Component: 1150 - total flux cleaned = -0.00504989 Jy ! Component: 1200 - total flux cleaned = -0.00511399 Jy ! Component: 1250 - total flux cleaned = -0.005199 Jy ! Component: 1300 - total flux cleaned = -0.00526141 Jy ! Component: 1350 - total flux cleaned = -0.00534406 Jy ! Component: 1400 - total flux cleaned = -0.0054253 Jy ! Component: 1450 - total flux cleaned = -0.00550538 Jy ! Component: 1500 - total flux cleaned = -0.00546544 Jy ! Component: 1550 - total flux cleaned = -0.00544577 Jy ! Component: 1600 - total flux cleaned = -0.00544568 Jy ! Component: 1650 - total flux cleaned = -0.00546477 Jy ! Component: 1700 - total flux cleaned = -0.00544592 Jy ! Component: 1750 - total flux cleaned = -0.00540885 Jy ! Component: 1800 - total flux cleaned = -0.00540893 Jy ! Component: 1850 - total flux cleaned = -0.00533626 Jy ! Component: 1900 - total flux cleaned = -0.0053006 Jy ! Component: 1950 - total flux cleaned = -0.00535378 Jy ! Component: 2000 - total flux cleaned = -0.00524799 Jy ! Component: 2050 - total flux cleaned = -0.0052133 Jy ! Component: 2100 - total flux cleaned = -0.00521347 Jy ! Component: 2150 - total flux cleaned = -0.00519642 Jy ! Component: 2200 - total flux cleaned = -0.0051964 Jy ! Component: 2250 - total flux cleaned = -0.0051297 Jy ! Component: 2300 - total flux cleaned = -0.0051628 Jy ! Component: 2350 - total flux cleaned = -0.00514612 Jy ! Component: 2400 - total flux cleaned = -0.0050975 Jy ! Component: 2450 - total flux cleaned = -0.00519415 Jy ! Component: 2500 - total flux cleaned = -0.00514635 Jy ! Component: 2550 - total flux cleaned = -0.00516219 Jy ! Component: 2600 - total flux cleaned = -0.00508416 Jy ! Component: 2650 - total flux cleaned = -0.00517741 Jy ! Component: 2700 - total flux cleaned = -0.00520807 Jy ! Component: 2750 - total flux cleaned = -0.00519295 Jy ! Component: 2800 - total flux cleaned = -0.00522325 Jy ! Component: 2850 - total flux cleaned = -0.00520807 Jy ! Component: 2900 - total flux cleaned = -0.00526755 Jy ! Component: 2950 - total flux cleaned = -0.00523804 Jy ! Component: 3000 - total flux cleaned = -0.00522341 Jy ! Component: 3050 - total flux cleaned = -0.00526714 Jy ! Component: 3100 - total flux cleaned = -0.00525269 Jy ! Component: 3150 - total flux cleaned = -0.00523828 Jy ! Component: 3200 - total flux cleaned = -0.00522409 Jy ! Component: 3250 - total flux cleaned = -0.00522419 Jy ! Component: 3300 - total flux cleaned = -0.00521019 Jy ! Component: 3350 - total flux cleaned = -0.00519614 Jy ! Component: 3400 - total flux cleaned = -0.00523739 Jy ! Component: 3450 - total flux cleaned = -0.00511433 Jy ! Component: 3500 - total flux cleaned = -0.00512792 Jy ! Component: 3550 - total flux cleaned = -0.0051147 Jy ! Component: 3600 - total flux cleaned = -0.0051417 Jy ! Component: 3650 - total flux cleaned = -0.00508833 Jy ! Component: 3700 - total flux cleaned = -0.00507512 Jy ! Component: 3750 - total flux cleaned = -0.00507519 Jy ! Component: 3800 - total flux cleaned = -0.00511436 Jy ! Component: 3850 - total flux cleaned = -0.00495883 Jy ! Component: 3900 - total flux cleaned = -0.00498454 Jy ! Component: 3950 - total flux cleaned = -0.00498462 Jy ! Component: 4000 - total flux cleaned = -0.00494635 Jy ! Component: 4050 - total flux cleaned = -0.00493386 Jy ! Total flux subtracted in 4096 components = -0.00493383 Jy ! Clean residual min=-0.000727 max=0.000750 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.0980798 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 373 components and 0.0980798 Jy ![Exited script file: muppet] wmap "J0310-0823_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.299 x 10.89 at 16.62 degrees (North through East) ! Clean map min=-0.0018544 max=0.090956 Jy/beam ! Writing clean map to FITS file: J0310-0823_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0909561 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000245652 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.810232 0.810232 1.62046 3.24093 6.48185 12.9637 25.9274 51.8548 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.09 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.299 x 10.89 at 16.62 degrees (North through East) ! Clean map min=-0.0018544 max=0.090956 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0310-0823_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:19 2019