! Started logfile: J0309-3604_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:36:34 2019 obs J0309-3604_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0309-3604_S_2017_05_31_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724586 visibilities/baseline/integration-bin. ! Found source: J0309-3604 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 12260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0309-3604_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 479 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995627Jy sigma=0.006254 ! Fit after self-cal, rms=0.938301Jy sigma=0.005963 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=6.773 mas, bpa=-8.407 degrees ! Estimated noise=1918.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552386 Jy ! Component: 100 - total flux cleaned = 0.0680417 Jy ! Total flux subtracted in 100 components = 0.0680417 Jy ! Clean residual min=-0.005503 max=0.005352 Jy/beam ! Clean residual mean=-0.000023 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.0680417 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0680417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154023Jy sigma=0.000648 ! Fit after self-cal, rms=0.153474Jy sigma=0.000644 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=7.765 mas, bpa=-5.404 degrees ! Estimated noise=1165.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571015 Jy ! Component: 100 - total flux cleaned = 0.00821337 Jy ! Component: 150 - total flux cleaned = 0.00941995 Jy ! Component: 200 - total flux cleaned = 0.00992451 Jy ! Total flux subtracted in 200 components = 0.00992451 Jy ! Clean residual min=-0.003613 max=0.003068 Jy/beam ! Clean residual mean=-0.000034 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0779662 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0779662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153144Jy sigma=0.000643 ! Fit after self-cal, rms=0.153116Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 0.92 KP 1.02 ! LA 0.97 MK 1.06 NL 0.98 OV 1.00 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.12 KP 0.98 ! LA 0.91 MK 1.03 NL 1.05 OV 1.03 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.92 KP 0.95 ! LA 0.98 MK 1.05 NL 1.09 OV 1.00 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.01 ! LA 0.91 MK 0.93 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.153116Jy sigma=0.000643 ! Fit after self-cal, rms=0.146704Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=7.799 mas, bpa=-5.372 degrees ! Estimated noise=1180.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853948 Jy ! Component: 100 - total flux cleaned = 0.000938549 Jy ! Component: 150 - total flux cleaned = 0.00100989 Jy ! Component: 200 - total flux cleaned = 0.00105227 Jy ! Total flux subtracted in 200 components = 0.00105227 Jy ! Clean residual min=-0.003539 max=0.002869 Jy/beam ! Clean residual mean=-0.000024 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.0790185 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0790185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146677Jy sigma=0.000642 ! Fit after self-cal, rms=0.146658Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146658Jy sigma=0.000642 ! Fit after self-cal, rms=0.141959Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.96 mas, bmaj=7.784 mas, bpa=-5.337 degrees ! Estimated noise=1198.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124906 Jy ! Component: 100 - total flux cleaned = 0.00149612 Jy ! Component: 150 - total flux cleaned = 0.00153888 Jy ! Component: 200 - total flux cleaned = 0.00157701 Jy ! Total flux subtracted in 200 components = 0.00157701 Jy ! Clean residual min=-0.003596 max=0.002961 Jy/beam ! Clean residual mean=-0.000016 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0805955 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.0805955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141924Jy sigma=0.000641 ! Fit after self-cal, rms=0.141901Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121709 Jy ! Component: 100 - total flux cleaned = 0.00018619 Jy ! Component: 150 - total flux cleaned = 0.000223325 Jy ! Component: 200 - total flux cleaned = 0.000256928 Jy ! Total flux subtracted in 200 components = 0.000256928 Jy ! Clean residual min=-0.003629 max=0.002986 Jy/beam ! Clean residual mean=-0.000018 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0808524 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0808524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141891Jy sigma=0.000641 ! Fit after self-cal, rms=0.141877Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141877Jy sigma=0.000641 ! Fit after self-cal, rms=0.116384Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.808 mas, bpa=-5.501 degrees ! Estimated noise=1203.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311793 Jy ! Component: 100 - total flux cleaned = 0.000331647 Jy ! Component: 150 - total flux cleaned = 0.000349812 Jy ! Component: 200 - total flux cleaned = 0.000381452 Jy ! Total flux subtracted in 200 components = 0.000381452 Jy ! Clean residual min=-0.003338 max=0.002916 Jy/beam ! Clean residual mean=0.000016 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0812338 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0812338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116378Jy sigma=0.000640 ! Fit after self-cal, rms=0.116125Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209512 Jy ! Component: 100 - total flux cleaned = 0.000228688 Jy ! Component: 150 - total flux cleaned = 0.00024493 Jy ! Component: 200 - total flux cleaned = 0.000244946 Jy ! Total flux subtracted in 200 components = 0.000244946 Jy ! Clean residual min=-0.003206 max=0.002840 Jy/beam ! Clean residual mean=0.000011 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0814788 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.0814788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116120Jy sigma=0.000639 ! Fit after self-cal, rms=0.116116Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116116Jy sigma=0.000639 ! Fit after self-cal, rms=0.116018Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.786 mas, bmaj=25.39 mas, bpa=-0.6187 degrees ! Estimated noise=1566.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514566 Jy ! Component: 100 - total flux cleaned = 0.000512272 Jy ! Component: 150 - total flux cleaned = 0.000511018 Jy ! Component: 200 - total flux cleaned = 0.000510239 Jy ! Total flux subtracted in 200 components = 0.000510239 Jy ! Clean residual min=-0.003262 max=0.002871 Jy/beam ! Clean residual mean=0.000037 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.081989 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.081989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116018Jy sigma=0.000639 ! Fit after self-cal, rms=0.115991Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.68164e-06 Jy ! Component: 100 - total flux cleaned = 2.68322e-06 Jy ! Component: 150 - total flux cleaned = 1.20116e-06 Jy ! Component: 200 - total flux cleaned = -1.25949e-05 Jy ! Total flux subtracted in 200 components = -1.25949e-05 Jy ! Clean residual min=-0.003268 max=0.002893 Jy/beam ! Clean residual mean=0.000035 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.0819764 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0819764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115993Jy sigma=0.000639 ! Fit after self-cal, rms=0.115984Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.82 mas, bpa=-5.597 degrees ! Estimated noise=1208.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 7.82 at -5.597 degrees (North through East) ! Clean map min=-0.0030126 max=0.073352 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=6.813 mas, bpa=-8.597 degrees ! Estimated noise=1995.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578673 Jy ! Component: 100 - total flux cleaned = 0.0715401 Jy ! Component: 150 - total flux cleaned = 0.07707 Jy ! Component: 200 - total flux cleaned = 0.0789767 Jy ! Total flux subtracted in 200 components = 0.0789767 Jy ! Clean residual min=-0.004827 max=0.004853 Jy/beam ! Clean residual mean=0.000007 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.0789767 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0789767 Jy ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.82 mas, bpa=-5.597 degrees ! Estimated noise=1208.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218637 Jy ! Component: 100 - total flux cleaned = 0.00228593 Jy ! Component: 150 - total flux cleaned = 0.00237326 Jy ! Component: 200 - total flux cleaned = 0.00245141 Jy ! Total flux subtracted in 200 components = 0.00245141 Jy ! Clean residual min=-0.003238 max=0.002889 Jy/beam ! Clean residual mean=0.000016 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.0814281 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.0814281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.786 mas, bmaj=25.39 mas, bpa=-0.6187 degrees ! Estimated noise=1566.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401092 Jy ! Component: 100 - total flux cleaned = 0.000400082 Jy ! Component: 150 - total flux cleaned = 0.000399381 Jy ! Component: 200 - total flux cleaned = 0.000398772 Jy ! Total flux subtracted in 200 components = 0.000398772 Jy ! Clean residual min=-0.003263 max=0.002878 Jy/beam ! Clean residual mean=0.000034 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0818269 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.34797e-07 Jy ! Component: 100 - total flux cleaned = -1.0039e-06 Jy ! Component: 150 - total flux cleaned = -1.18395e-06 Jy ! Component: 200 - total flux cleaned = -5.24106e-07 Jy ! Total flux subtracted in 200 components = -5.24106e-07 Jy ! Clean residual min=-0.003295 max=0.002893 Jy/beam ! Clean residual mean=0.000034 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.0818264 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0818264 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.82 mas, bpa=-5.597 degrees ! Estimated noise=1208.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.45702e-05 Jy ! Component: 100 - total flux cleaned = -2.33046e-05 Jy ! Component: 150 - total flux cleaned = -4.89208e-05 Jy ! Component: 200 - total flux cleaned = -4.7826e-05 Jy ! Total flux subtracted in 200 components = -4.7826e-05 Jy ! Clean residual min=-0.003145 max=0.002907 Jy/beam ! Clean residual mean=0.000017 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.0817785 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.0817785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115997Jy sigma=0.000639 ! Fit after self-cal, rms=0.115991Jy sigma=0.000639 wmodel J0309-3604_S_2017_05_31_pus_map.mod ! Writing 40 model components to file: J0309-3604_S_2017_05_31_pus_map.mod wobs J0309-3604_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0309-3604_S_2017_05_31_pus_uvs.fits wwins J0309-3604_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0309-3604_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294959 Jy ! Component: 100 - total flux cleaned = -0.000583835 Jy ! Component: 150 - total flux cleaned = -0.000891834 Jy ! Component: 200 - total flux cleaned = -0.00110118 Jy ! Component: 250 - total flux cleaned = -0.00106176 Jy ! Component: 300 - total flux cleaned = -0.00113905 Jy ! Component: 350 - total flux cleaned = -0.00125245 Jy ! Component: 400 - total flux cleaned = -0.00132623 Jy ! Component: 450 - total flux cleaned = -0.00132695 Jy ! Component: 500 - total flux cleaned = -0.00132728 Jy ! Component: 550 - total flux cleaned = -0.0014289 Jy ! Component: 600 - total flux cleaned = -0.00146095 Jy ! Component: 650 - total flux cleaned = -0.00149284 Jy ! Component: 700 - total flux cleaned = -0.00152456 Jy ! Component: 750 - total flux cleaned = -0.0016488 Jy ! Component: 800 - total flux cleaned = -0.00173951 Jy ! Component: 850 - total flux cleaned = -0.00179967 Jy ! Component: 900 - total flux cleaned = -0.00191705 Jy ! Component: 950 - total flux cleaned = -0.00200368 Jy ! Component: 1000 - total flux cleaned = -0.00211773 Jy ! Component: 1050 - total flux cleaned = -0.00225693 Jy ! Component: 1100 - total flux cleaned = -0.00233813 Jy ! Component: 1150 - total flux cleaned = -0.00244491 Jy ! Component: 1200 - total flux cleaned = -0.0024712 Jy ! Component: 1250 - total flux cleaned = -0.00254929 Jy ! Component: 1300 - total flux cleaned = -0.00270365 Jy ! Component: 1350 - total flux cleaned = -0.00285517 Jy ! Component: 1400 - total flux cleaned = -0.00295405 Jy ! Component: 1450 - total flux cleaned = -0.00307683 Jy ! Component: 1500 - total flux cleaned = -0.0031737 Jy ! Component: 1550 - total flux cleaned = -0.00329321 Jy ! Component: 1600 - total flux cleaned = -0.00334068 Jy ! Component: 1650 - total flux cleaned = -0.00350397 Jy ! Component: 1700 - total flux cleaned = -0.00350426 Jy ! Component: 1750 - total flux cleaned = -0.00359533 Jy ! Component: 1800 - total flux cleaned = -0.00368469 Jy ! Component: 1850 - total flux cleaned = -0.0036626 Jy ! Component: 1900 - total flux cleaned = -0.0038597 Jy ! Component: 1950 - total flux cleaned = -0.00396816 Jy ! Component: 2000 - total flux cleaned = -0.00405379 Jy ! Component: 2050 - total flux cleaned = -0.00413911 Jy ! Component: 2100 - total flux cleaned = -0.00432825 Jy ! Component: 2150 - total flux cleaned = -0.0043489 Jy ! Component: 2200 - total flux cleaned = -0.00451352 Jy ! Component: 2250 - total flux cleaned = -0.00449289 Jy ! Component: 2300 - total flux cleaned = -0.00457412 Jy ! Component: 2350 - total flux cleaned = -0.00461422 Jy ! Component: 2400 - total flux cleaned = -0.00465385 Jy ! Component: 2450 - total flux cleaned = -0.00467342 Jy ! Component: 2500 - total flux cleaned = -0.00463417 Jy ! Component: 2550 - total flux cleaned = -0.00465362 Jy ! Component: 2600 - total flux cleaned = -0.00467276 Jy ! Component: 2650 - total flux cleaned = -0.0047107 Jy ! Component: 2700 - total flux cleaned = -0.00470999 Jy ! Component: 2750 - total flux cleaned = -0.0046537 Jy ! Component: 2800 - total flux cleaned = -0.00469128 Jy ! Component: 2850 - total flux cleaned = -0.00470952 Jy ! Component: 2900 - total flux cleaned = -0.00467301 Jy ! Component: 2950 - total flux cleaned = -0.00467309 Jy ! Component: 3000 - total flux cleaned = -0.00469101 Jy ! Component: 3050 - total flux cleaned = -0.00467351 Jy ! Component: 3100 - total flux cleaned = -0.00462058 Jy ! Component: 3150 - total flux cleaned = -0.00462068 Jy ! Component: 3200 - total flux cleaned = -0.00456839 Jy ! Component: 3250 - total flux cleaned = -0.00463747 Jy ! Component: 3300 - total flux cleaned = -0.00458597 Jy ! Component: 3350 - total flux cleaned = -0.00455194 Jy ! Component: 3400 - total flux cleaned = -0.00453502 Jy ! Component: 3450 - total flux cleaned = -0.00450139 Jy ! Component: 3500 - total flux cleaned = -0.00448444 Jy ! Component: 3550 - total flux cleaned = -0.00443468 Jy ! Component: 3600 - total flux cleaned = -0.00448423 Jy ! Component: 3650 - total flux cleaned = -0.0044351 Jy ! Component: 3700 - total flux cleaned = -0.00443525 Jy ! Component: 3750 - total flux cleaned = -0.004403 Jy ! Component: 3800 - total flux cleaned = -0.00435498 Jy ! Component: 3850 - total flux cleaned = -0.0043868 Jy ! Component: 3900 - total flux cleaned = -0.00430755 Jy ! Component: 3950 - total flux cleaned = -0.00430756 Jy ! Component: 4000 - total flux cleaned = -0.00426053 Jy ! Component: 4050 - total flux cleaned = -0.00426045 Jy ! Total flux subtracted in 4096 components = -0.00419846 Jy ! Clean residual min=-0.001039 max=0.000888 Jy/beam ! Clean residual mean=-0.000000 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.0775801 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 294 components and 0.0775801 Jy ![Exited script file: muppet] wmap "J0309-3604_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 7.82 at -5.597 degrees (North through East) ! Clean map min=-0.0020247 max=0.073624 Jy/beam ! Writing clean map to FITS file: J0309-3604_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0736242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000265894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08345 1.08345 2.1669 4.33381 8.66761 17.3352 34.6705 69.3409 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 7.82 at -5.597 degrees (North through East) ! Clean map min=-0.0020247 max=0.073624 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0309-3604_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:36:43 2019