! Started logfile: J0309-0559_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:03:03 2019 obs J0309-0559_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0309-0559_S_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.710526 visibilities/baseline/integration-bin. ! Found source: J0309-0559 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 14580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0309-0559_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 444 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929496Jy sigma=0.006381 ! Fit after self-cal, rms=0.913603Jy sigma=0.006301 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=9.487 mas, bpa=18.9 degrees ! Estimated noise=1251.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0738757 Jy ! Component: 100 - total flux cleaned = 0.0899854 Jy ! Total flux subtracted in 100 components = 0.0899854 Jy ! Clean residual min=-0.003274 max=0.004494 Jy/beam ! Clean residual mean=0.000006 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.0899854 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0899854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120751Jy sigma=0.000660 ! Fit after self-cal, rms=0.120671Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.182 mas, bmaj=10.51 mas, bpa=18.19 degrees ! Estimated noise=929.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125651 Jy ! Component: 100 - total flux cleaned = 0.000870465 Jy ! Component: 150 - total flux cleaned = 0.00067812 Jy ! Component: 200 - total flux cleaned = 0.00052324 Jy ! Total flux subtracted in 200 components = 0.00052324 Jy ! Clean residual min=-0.002995 max=0.003246 Jy/beam ! Clean residual mean=0.000005 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0905087 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0905087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120568Jy sigma=0.000659 ! Fit after self-cal, rms=0.120564Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.07 KP 0.98 ! LA 0.99 MK 1.00* NL 0.89 OV 0.99 ! PT 1.18 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.06 KP 0.95 ! LA 1.07 MK 1.00* NL 0.99 OV 0.99 ! PT 1.12 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 1.00 KP 0.98 ! LA 0.98 MK 1.00* NL 0.94 OV 0.96 ! PT 1.21 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.93 HN 0.93 KP 0.72 ! LA 0.86 MK 1.00* NL 1.00* OV 1.00 ! PT 1.07 SC 0.85 ! ! ! Fit before self-cal, rms=0.120564Jy sigma=0.000659 ! Fit after self-cal, rms=0.110492Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.173 mas, bmaj=10.47 mas, bpa=18.11 degrees ! Estimated noise=922.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000551309 Jy ! Component: 100 - total flux cleaned = -0.000631109 Jy ! Component: 150 - total flux cleaned = -0.000717547 Jy ! Component: 200 - total flux cleaned = -0.00078925 Jy ! Total flux subtracted in 200 components = -0.00078925 Jy ! Clean residual min=-0.002215 max=0.002716 Jy/beam ! Clean residual mean=0.000002 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0897194 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.0897194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110471Jy sigma=0.000656 ! Fit after self-cal, rms=0.110480Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110480Jy sigma=0.000655 ! Fit after self-cal, rms=0.113818Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.173 mas, bmaj=10.45 mas, bpa=18.07 degrees ! Estimated noise=922.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166303 Jy ! Component: 100 - total flux cleaned = -0.000246507 Jy ! Component: 150 - total flux cleaned = -0.000245862 Jy ! Component: 200 - total flux cleaned = -0.000263299 Jy ! Total flux subtracted in 200 components = -0.000263299 Jy ! Clean residual min=-0.002011 max=0.002344 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0894561 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0894561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113806Jy sigma=0.000652 ! Fit after self-cal, rms=0.113952Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76, -96). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215427 Jy ! Component: 100 - total flux cleaned = 0.002866 Jy ! Component: 150 - total flux cleaned = 0.00318206 Jy ! Component: 200 - total flux cleaned = 0.00345162 Jy ! Total flux subtracted in 200 components = 0.00345162 Jy ! Clean residual min=-0.002002 max=0.002015 Jy/beam ! Clean residual mean=0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0929077 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.0929077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113895Jy sigma=0.000651 ! Fit after self-cal, rms=0.113888Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113888Jy sigma=0.000651 ! Fit after self-cal, rms=0.115141Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.168 mas, bmaj=10.47 mas, bpa=18.14 degrees ! Estimated noise=920.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011157 Jy ! Component: 100 - total flux cleaned = 0.00140576 Jy ! Component: 150 - total flux cleaned = 0.00162735 Jy ! Component: 200 - total flux cleaned = 0.00170328 Jy ! Total flux subtracted in 200 components = 0.00170328 Jy ! Clean residual min=-0.001968 max=0.002004 Jy/beam ! Clean residual mean=0.000002 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.094611 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 75 components and 0.094611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115121Jy sigma=0.000651 ! Fit after self-cal, rms=0.115130Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504655 Jy ! Component: 100 - total flux cleaned = 0.000649928 Jy ! Component: 150 - total flux cleaned = 0.000716753 Jy ! Component: 200 - total flux cleaned = 0.000799953 Jy ! Total flux subtracted in 200 components = 0.000799953 Jy ! Clean residual min=-0.001979 max=0.001991 Jy/beam ! Clean residual mean=0.000003 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.095411 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 0.095411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115119Jy sigma=0.000651 ! Fit after self-cal, rms=0.115117Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115117Jy sigma=0.000651 ! Fit after self-cal, rms=0.115173Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.778 mas, bmaj=13.12 mas, bpa=10.84 degrees ! Estimated noise=1082.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200952 Jy ! Component: 100 - total flux cleaned = 0.000180935 Jy ! Component: 150 - total flux cleaned = 0.000195832 Jy ! Component: 200 - total flux cleaned = 0.000239353 Jy ! Total flux subtracted in 200 components = 0.000239353 Jy ! Clean residual min=-0.002326 max=0.001961 Jy/beam ! Clean residual mean=0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0956503 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.0956503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115167Jy sigma=0.000651 ! Fit after self-cal, rms=0.115170Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166016 Jy ! Component: 100 - total flux cleaned = 0.000192784 Jy ! Component: 150 - total flux cleaned = 0.00021779 Jy ! Component: 200 - total flux cleaned = 0.000251653 Jy ! Total flux subtracted in 200 components = 0.000251653 Jy ! Clean residual min=-0.002343 max=0.001928 Jy/beam ! Clean residual mean=0.000006 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.095902 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.095902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115168Jy sigma=0.000651 ! Fit after self-cal, rms=0.115170Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=10.47 mas, bpa=18.17 degrees ! Estimated noise=919.673 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.166 x 10.47 at 18.17 degrees (North through East) ! Clean map min=-0.0023655 max=0.09314 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=9.439 mas, bpa=18.77 degrees ! Estimated noise=1225.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0723479 Jy ! Component: 100 - total flux cleaned = 0.0881253 Jy ! Component: 150 - total flux cleaned = 0.0915961 Jy ! Component: 200 - total flux cleaned = 0.0923922 Jy ! Total flux subtracted in 200 components = 0.0923922 Jy ! Clean residual min=-0.002922 max=0.003259 Jy/beam ! Clean residual mean=0.000001 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0923922 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0923922 Jy ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=10.47 mas, bpa=18.17 degrees ! Estimated noise=919.673 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119052 Jy ! Component: 100 - total flux cleaned = 0.00155623 Jy ! Component: 150 - total flux cleaned = 0.00193565 Jy ! Component: 200 - total flux cleaned = 0.00209887 Jy ! Total flux subtracted in 200 components = 0.00209887 Jy ! Clean residual min=-0.002038 max=0.002035 Jy/beam ! Clean residual mean=0.000003 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.094491 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.0944911 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.778 mas, bmaj=13.12 mas, bpa=10.84 degrees ! Estimated noise=1082.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458614 Jy ! Component: 100 - total flux cleaned = 0.000789197 Jy ! Component: 150 - total flux cleaned = 0.0010377 Jy ! Component: 200 - total flux cleaned = 0.00111172 Jy ! Total flux subtracted in 200 components = 0.00111172 Jy ! Clean residual min=-0.002254 max=0.002023 Jy/beam ! Clean residual mean=0.000006 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0956028 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.99029e-05 Jy ! Component: 100 - total flux cleaned = 0.000151478 Jy ! Component: 150 - total flux cleaned = 0.000207467 Jy ! Component: 200 - total flux cleaned = 0.000224923 Jy ! Total flux subtracted in 200 components = 0.000224923 Jy ! Clean residual min=-0.002281 max=0.001980 Jy/beam ! Clean residual mean=0.000005 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0958277 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 82 components and 0.0958277 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.166 mas, bmaj=10.47 mas, bpa=18.17 degrees ! Estimated noise=919.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382644 Jy ! Component: 100 - total flux cleaned = -0.000344879 Jy ! Component: 150 - total flux cleaned = -0.000379942 Jy ! Component: 200 - total flux cleaned = -0.000350672 Jy ! Total flux subtracted in 200 components = -0.000350672 Jy ! Clean residual min=-0.002033 max=0.002056 Jy/beam ! Clean residual mean=0.000003 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.095477 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.095477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115188Jy sigma=0.000651 ! Fit after self-cal, rms=0.115184Jy sigma=0.000651 wmodel J0309-0559_S_2017_01_16_pus_map.mod ! Writing 95 model components to file: J0309-0559_S_2017_01_16_pus_map.mod wobs J0309-0559_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0309-0559_S_2017_01_16_pus_uvs.fits wwins J0309-0559_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0309-0559_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.81033e-06 Jy ! Component: 100 - total flux cleaned = -0.000242452 Jy ! Component: 150 - total flux cleaned = -0.000368188 Jy ! Component: 200 - total flux cleaned = -0.000520078 Jy ! Component: 250 - total flux cleaned = -0.000578305 Jy ! Component: 300 - total flux cleaned = -0.000549975 Jy ! Component: 350 - total flux cleaned = -0.000604837 Jy ! Component: 400 - total flux cleaned = -0.000605118 Jy ! Component: 450 - total flux cleaned = -0.000579482 Jy ! Component: 500 - total flux cleaned = -0.000478294 Jy ! Component: 550 - total flux cleaned = -0.00042906 Jy ! Component: 600 - total flux cleaned = -0.000380419 Jy ! Component: 650 - total flux cleaned = -0.000238722 Jy ! Component: 700 - total flux cleaned = -0.000146284 Jy ! Component: 750 - total flux cleaned = -7.78323e-05 Jy ! Component: 800 - total flux cleaned = -7.74251e-05 Jy ! Component: 850 - total flux cleaned = 1.05059e-05 Jy ! Component: 900 - total flux cleaned = -1.10471e-05 Jy ! Component: 950 - total flux cleaned = 7.45712e-05 Jy ! Component: 1000 - total flux cleaned = 5.29951e-05 Jy ! Component: 1050 - total flux cleaned = 9.40999e-05 Jy ! Component: 1100 - total flux cleaned = 7.34677e-05 Jy ! Component: 1150 - total flux cleaned = 7.3472e-05 Jy ! Component: 1200 - total flux cleaned = 9.34544e-05 Jy ! Component: 1250 - total flux cleaned = 7.35969e-05 Jy ! Component: 1300 - total flux cleaned = 1.53081e-05 Jy ! Component: 1350 - total flux cleaned = 3.43631e-05 Jy ! Component: 1400 - total flux cleaned = 5.31268e-05 Jy ! Component: 1450 - total flux cleaned = 5.25798e-05 Jy ! Component: 1500 - total flux cleaned = 1.54801e-05 Jy ! Component: 1550 - total flux cleaned = -3.05589e-06 Jy ! Component: 1600 - total flux cleaned = -2.14383e-05 Jy ! Component: 1650 - total flux cleaned = -5.781e-05 Jy ! Component: 1700 - total flux cleaned = -0.000146691 Jy ! Component: 1750 - total flux cleaned = -0.000111223 Jy ! Component: 1800 - total flux cleaned = -0.000145985 Jy ! Component: 1850 - total flux cleaned = -0.00016333 Jy ! Component: 1900 - total flux cleaned = -0.000197557 Jy ! Component: 1950 - total flux cleaned = -0.000146471 Jy ! Component: 2000 - total flux cleaned = -0.000179947 Jy ! Component: 2050 - total flux cleaned = -0.000196739 Jy ! Component: 2100 - total flux cleaned = -0.000180296 Jy ! Component: 2150 - total flux cleaned = -0.000163802 Jy ! Component: 2200 - total flux cleaned = -0.000131499 Jy ! Component: 2250 - total flux cleaned = -0.000195939 Jy ! Component: 2300 - total flux cleaned = -0.000212018 Jy ! Component: 2350 - total flux cleaned = -0.000228046 Jy ! Component: 2400 - total flux cleaned = -0.00027544 Jy ! Component: 2450 - total flux cleaned = -0.00032252 Jy ! Component: 2500 - total flux cleaned = -0.000338051 Jy ! Component: 2550 - total flux cleaned = -0.000322625 Jy ! Component: 2600 - total flux cleaned = -0.000399371 Jy ! Component: 2650 - total flux cleaned = -0.000384232 Jy ! Component: 2700 - total flux cleaned = -0.000444516 Jy ! Component: 2750 - total flux cleaned = -0.000489488 Jy ! Component: 2800 - total flux cleaned = -0.000474783 Jy ! Component: 2850 - total flux cleaned = -0.000519011 Jy ! Component: 2900 - total flux cleaned = -0.000548353 Jy ! Component: 2950 - total flux cleaned = -0.00060668 Jy ! Component: 3000 - total flux cleaned = -0.000664445 Jy ! Component: 3050 - total flux cleaned = -0.000664364 Jy ! Component: 3100 - total flux cleaned = -0.000693137 Jy ! Component: 3150 - total flux cleaned = -0.000735562 Jy ! Component: 3200 - total flux cleaned = -0.000749621 Jy ! Component: 3250 - total flux cleaned = -0.000791499 Jy ! Component: 3300 - total flux cleaned = -0.00086064 Jy ! Component: 3350 - total flux cleaned = -0.000902063 Jy ! Component: 3400 - total flux cleaned = -0.000888495 Jy ! Component: 3450 - total flux cleaned = -0.000820391 Jy ! Component: 3500 - total flux cleaned = -0.000806975 Jy ! Component: 3550 - total flux cleaned = -0.00086078 Jy ! Component: 3600 - total flux cleaned = -0.000900795 Jy ! Component: 3650 - total flux cleaned = -0.000914041 Jy ! Component: 3700 - total flux cleaned = -0.000966741 Jy ! Component: 3750 - total flux cleaned = -0.000979666 Jy ! Component: 3800 - total flux cleaned = -0.00104475 Jy ! Component: 3850 - total flux cleaned = -0.00107052 Jy ! Component: 3900 - total flux cleaned = -0.00109625 Jy ! Component: 3950 - total flux cleaned = -0.00105794 Jy ! Component: 4000 - total flux cleaned = -0.00110892 Jy ! Component: 4050 - total flux cleaned = -0.00113419 Jy ! Total flux subtracted in 4096 components = -0.00117199 Jy ! Clean residual min=-0.000783 max=0.000865 Jy/beam ! Clean residual mean=0.000003 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.0943051 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 413 components and 0.0943051 Jy ![Exited script file: muppet] wmap "J0309-0559_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.166 x 10.47 at 18.17 degrees (North through East) ! Clean map min=-0.0022435 max=0.092789 Jy/beam ! Writing clean map to FITS file: J0309-0559_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0927893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246745 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.79776 0.79776 1.59552 3.19104 6.38208 12.7642 25.5283 51.0566 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.166 x 10.47 at 18.17 degrees (North through East) ! Clean map min=-0.0022435 max=0.092789 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0309-0559_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:03:08 2019