! Started logfile: J0308+2355_S_2017_01_21_pus_uvs.log on Sun May 5 15:44:55 2019 obs J0308+2355_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0308+2355_S_2017_01_21_pus_uva.fits ! AN table 1: 132 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.819655 visibilities/baseline/integration-bin. ! Found source: J0308+2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 15580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0308+2355_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 401 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988822Jy sigma=0.008558 ! Fit after self-cal, rms=0.950548Jy sigma=0.008272 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.696 mas, bmaj=6.037 mas, bpa=-6.742 degrees ! Estimated noise=1192.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410276 Jy ! Component: 100 - total flux cleaned = 0.0499809 Jy ! Total flux subtracted in 100 components = 0.0499809 Jy ! Clean residual min=-0.003554 max=0.003984 Jy/beam ! Clean residual mean=-0.000004 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.0499809 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0499809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082631Jy sigma=0.000651 ! Fit after self-cal, rms=0.081781Jy sigma=0.000645 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=7.073 mas, bpa=-7.517 degrees ! Estimated noise=735.308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291955 Jy ! Component: 100 - total flux cleaned = 0.00388798 Jy ! Component: 150 - total flux cleaned = 0.00399117 Jy ! Component: 200 - total flux cleaned = 0.00396334 Jy ! Total flux subtracted in 200 components = 0.00396334 Jy ! Clean residual min=-0.001982 max=0.002321 Jy/beam ! Clean residual mean=-0.000005 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0539443 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.0539443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081655Jy sigma=0.000644 ! Fit after self-cal, rms=0.081666Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00 LA 1.02 ! MK 0.98 NL 1.06 OV 1.06 PT 1.04 ! SC 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.00 LA 0.99 ! MK 0.95 NL 1.02 OV 1.12 PT 1.04 ! SC 1.06 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 1.12 LA 1.00 ! MK 0.98 NL 1.20 OV 0.98 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.94 HN 0.95 LA 0.96 ! MK 0.79 NL 1.00* OV 0.93 PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.081666Jy sigma=0.000644 ! Fit after self-cal, rms=0.080203Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=7.063 mas, bpa=-7.957 degrees ! Estimated noise=737.502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000919457 Jy ! Component: 100 - total flux cleaned = 0.0010218 Jy ! Component: 150 - total flux cleaned = 0.00100381 Jy ! Component: 200 - total flux cleaned = 0.000988054 Jy ! Total flux subtracted in 200 components = 0.000988054 Jy ! Clean residual min=-0.002023 max=0.002246 Jy/beam ! Clean residual mean=-0.000003 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0549323 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0549323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080188Jy sigma=0.000643 ! Fit after self-cal, rms=0.080163Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080163Jy sigma=0.000642 ! Fit after self-cal, rms=0.080101Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=7.027 mas, bpa=-7.371 degrees ! Estimated noise=740.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403699 Jy ! Component: 100 - total flux cleaned = 0.000436258 Jy ! Component: 150 - total flux cleaned = 0.000445725 Jy ! Component: 200 - total flux cleaned = 0.000445227 Jy ! Total flux subtracted in 200 components = 0.000445227 Jy ! Clean residual min=-0.001821 max=0.001883 Jy/beam ! Clean residual mean=-0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0553775 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0553775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080096Jy sigma=0.000641 ! Fit after self-cal, rms=0.080072Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.2824e-05 Jy ! Component: 100 - total flux cleaned = -4.20311e-05 Jy ! Component: 150 - total flux cleaned = -7.0668e-05 Jy ! Component: 200 - total flux cleaned = -7.06093e-05 Jy ! Total flux subtracted in 200 components = -7.06093e-05 Jy ! Clean residual min=-0.001836 max=0.001832 Jy/beam ! Clean residual mean=-0.000003 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0553069 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0553069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080069Jy sigma=0.000641 ! Fit after self-cal, rms=0.080072Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080072Jy sigma=0.000641 ! Fit after self-cal, rms=0.080298Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=6.998 mas, bpa=-7.167 degrees ! Estimated noise=741.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332553 Jy ! Component: 100 - total flux cleaned = 0.000371685 Jy ! Component: 150 - total flux cleaned = 0.000405867 Jy ! Component: 200 - total flux cleaned = 0.00043625 Jy ! Total flux subtracted in 200 components = 0.00043625 Jy ! Clean residual min=-0.001791 max=0.001778 Jy/beam ! Clean residual mean=-0.000003 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0557432 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0557432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080295Jy sigma=0.000641 ! Fit after self-cal, rms=0.080310Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.87472e-06 Jy ! Component: 100 - total flux cleaned = -2.03126e-05 Jy ! Component: 150 - total flux cleaned = -7.11488e-06 Jy ! Component: 200 - total flux cleaned = -9.0938e-07 Jy ! Total flux subtracted in 200 components = -9.0938e-07 Jy ! Clean residual min=-0.001801 max=0.001790 Jy/beam ! Clean residual mean=-0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0557423 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.0557423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080308Jy sigma=0.000641 ! Fit after self-cal, rms=0.080301Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080301Jy sigma=0.000640 ! Fit after self-cal, rms=0.080409Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.103 mas, bmaj=10.06 mas, bpa=-2.345 degrees ! Estimated noise=924.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389085 Jy ! Component: 100 - total flux cleaned = 0.000421009 Jy ! Component: 150 - total flux cleaned = 0.000449634 Jy ! Component: 200 - total flux cleaned = 0.000466018 Jy ! Total flux subtracted in 200 components = 0.000466018 Jy ! Clean residual min=-0.001922 max=0.002022 Jy/beam ! Clean residual mean=-0.000007 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0562083 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0562083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080412Jy sigma=0.000640 ! Fit after self-cal, rms=0.080420Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.45877e-05 Jy ! Component: 100 - total flux cleaned = 9.45579e-05 Jy ! Component: 150 - total flux cleaned = 7.29546e-05 Jy ! Component: 200 - total flux cleaned = 6.67975e-05 Jy ! Total flux subtracted in 200 components = 6.67975e-05 Jy ! Clean residual min=-0.001927 max=0.002018 Jy/beam ! Clean residual mean=-0.000007 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0562751 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0562751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080423Jy sigma=0.000640 ! Fit after self-cal, rms=0.080426Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=6.973 mas, bpa=-7.017 degrees ! Estimated noise=742.264 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 6.973 at -7.017 degrees (North through East) ! Clean map min=-0.0017001 max=0.053887 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=5.939 mas, bpa=-6.122 degrees ! Estimated noise=1168.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410444 Jy ! Component: 100 - total flux cleaned = 0.0501304 Jy ! Component: 150 - total flux cleaned = 0.0532134 Jy ! Component: 200 - total flux cleaned = 0.0539914 Jy ! Total flux subtracted in 200 components = 0.0539914 Jy ! Clean residual min=-0.003097 max=0.003440 Jy/beam ! Clean residual mean=-0.000003 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0539914 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0539914 Jy ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=6.973 mas, bpa=-7.017 degrees ! Estimated noise=742.264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167696 Jy ! Component: 100 - total flux cleaned = 0.00215328 Jy ! Component: 150 - total flux cleaned = 0.00234086 Jy ! Component: 200 - total flux cleaned = 0.00239557 Jy ! Total flux subtracted in 200 components = 0.00239557 Jy ! Clean residual min=-0.001837 max=0.001823 Jy/beam ! Clean residual mean=-0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.056387 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.056387 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.103 mas, bmaj=10.06 mas, bpa=-2.345 degrees ! Estimated noise=924.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.16193e-05 Jy ! Component: 100 - total flux cleaned = -9.87401e-05 Jy ! Component: 150 - total flux cleaned = -9.86141e-05 Jy ! Component: 200 - total flux cleaned = -8.86063e-05 Jy ! Total flux subtracted in 200 components = -8.86063e-05 Jy ! Clean residual min=-0.001873 max=0.002027 Jy/beam ! Clean residual mean=-0.000007 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0562984 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.80432e-06 Jy ! Component: 100 - total flux cleaned = 9.1784e-06 Jy ! Component: 150 - total flux cleaned = 8.80055e-06 Jy ! Component: 200 - total flux cleaned = 9.15071e-06 Jy ! Total flux subtracted in 200 components = 9.15071e-06 Jy ! Clean residual min=-0.001882 max=0.002034 Jy/beam ! Clean residual mean=-0.000007 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0563076 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0563076 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=6.973 mas, bpa=-7.017 degrees ! Estimated noise=742.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123993 Jy ! Component: 100 - total flux cleaned = 3.13617e-05 Jy ! Component: 150 - total flux cleaned = 1.90108e-05 Jy ! Component: 200 - total flux cleaned = 3.7958e-05 Jy ! Total flux subtracted in 200 components = 3.7958e-05 Jy ! Clean residual min=-0.001812 max=0.001820 Jy/beam ! Clean residual mean=-0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0563455 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0563455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080424Jy sigma=0.000640 ! Fit after self-cal, rms=0.080424Jy sigma=0.000640 wmodel J0308+2355_S_2017_01_21_pus_map.mod ! Writing 45 model components to file: J0308+2355_S_2017_01_21_pus_map.mod wobs J0308+2355_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0308+2355_S_2017_01_21_pus_uvs.fits wwins J0308+2355_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0308+2355_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134069 Jy ! Component: 100 - total flux cleaned = 0.0001657 Jy ! Component: 150 - total flux cleaned = 0.00028541 Jy ! Component: 200 - total flux cleaned = 0.000371368 Jy ! Component: 250 - total flux cleaned = 0.00050928 Jy ! Component: 300 - total flux cleaned = 0.000642613 Jy ! Component: 350 - total flux cleaned = 0.000798438 Jy ! Component: 400 - total flux cleaned = 0.00094929 Jy ! Component: 450 - total flux cleaned = 0.00107144 Jy ! Component: 500 - total flux cleaned = 0.00111919 Jy ! Component: 550 - total flux cleaned = 0.00123599 Jy ! Component: 600 - total flux cleaned = 0.00121279 Jy ! Component: 650 - total flux cleaned = 0.00130325 Jy ! Component: 700 - total flux cleaned = 0.00134735 Jy ! Component: 750 - total flux cleaned = 0.001347 Jy ! Component: 800 - total flux cleaned = 0.00139035 Jy ! Component: 850 - total flux cleaned = 0.00147477 Jy ! Component: 900 - total flux cleaned = 0.00147523 Jy ! Component: 950 - total flux cleaned = 0.00149632 Jy ! Component: 1000 - total flux cleaned = 0.00149659 Jy ! Component: 1050 - total flux cleaned = 0.00149704 Jy ! Component: 1100 - total flux cleaned = 0.00155574 Jy ! Component: 1150 - total flux cleaned = 0.00149728 Jy ! Component: 1200 - total flux cleaned = 0.00153562 Jy ! Component: 1250 - total flux cleaned = 0.0014795 Jy ! Component: 1300 - total flux cleaned = 0.00159192 Jy ! Component: 1350 - total flux cleaned = 0.00157354 Jy ! Component: 1400 - total flux cleaned = 0.00157387 Jy ! Component: 1450 - total flux cleaned = 0.00155615 Jy ! Component: 1500 - total flux cleaned = 0.00160939 Jy ! Component: 1550 - total flux cleaned = 0.00155669 Jy ! Component: 1600 - total flux cleaned = 0.00152206 Jy ! Component: 1650 - total flux cleaned = 0.00157371 Jy ! Component: 1700 - total flux cleaned = 0.00157379 Jy ! Component: 1750 - total flux cleaned = 0.00154024 Jy ! Component: 1800 - total flux cleaned = 0.00147382 Jy ! Component: 1850 - total flux cleaned = 0.00147392 Jy ! Component: 1900 - total flux cleaned = 0.00145788 Jy ! Component: 1950 - total flux cleaned = 0.00144178 Jy ! Component: 2000 - total flux cleaned = 0.00147383 Jy ! Component: 2050 - total flux cleaned = 0.00148956 Jy ! Component: 2100 - total flux cleaned = 0.001411 Jy ! Component: 2150 - total flux cleaned = 0.00142675 Jy ! Component: 2200 - total flux cleaned = 0.0015038 Jy ! Component: 2250 - total flux cleaned = 0.00148858 Jy ! Component: 2300 - total flux cleaned = 0.00147373 Jy ! Component: 2350 - total flux cleaned = 0.00154868 Jy ! Component: 2400 - total flux cleaned = 0.00156372 Jy ! Component: 2450 - total flux cleaned = 0.00162295 Jy ! Component: 2500 - total flux cleaned = 0.00163729 Jy ! Component: 2550 - total flux cleaned = 0.00165184 Jy ! Component: 2600 - total flux cleaned = 0.00166647 Jy ! Component: 2650 - total flux cleaned = 0.00173799 Jy ! Component: 2700 - total flux cleaned = 0.00176629 Jy ! Component: 2750 - total flux cleaned = 0.00176622 Jy ! Component: 2800 - total flux cleaned = 0.00179397 Jy ! Component: 2850 - total flux cleaned = 0.00182172 Jy ! Component: 2900 - total flux cleaned = 0.00187693 Jy ! Component: 2950 - total flux cleaned = 0.0019041 Jy ! Component: 3000 - total flux cleaned = 0.00193117 Jy ! Component: 3050 - total flux cleaned = 0.00199846 Jy ! Component: 3100 - total flux cleaned = 0.0020654 Jy ! Component: 3150 - total flux cleaned = 0.00210542 Jy ! Component: 3200 - total flux cleaned = 0.00215839 Jy ! Component: 3250 - total flux cleaned = 0.00222397 Jy ! Component: 3300 - total flux cleaned = 0.00226315 Jy ! Component: 3350 - total flux cleaned = 0.00227611 Jy ! Component: 3400 - total flux cleaned = 0.0023792 Jy ! Component: 3450 - total flux cleaned = 0.00248169 Jy ! Component: 3500 - total flux cleaned = 0.00250719 Jy ! Component: 3550 - total flux cleaned = 0.00255776 Jy ! Component: 3600 - total flux cleaned = 0.00265833 Jy ! Component: 3650 - total flux cleaned = 0.00272069 Jy ! Component: 3700 - total flux cleaned = 0.00273302 Jy ! Component: 3750 - total flux cleaned = 0.00284409 Jy ! Component: 3800 - total flux cleaned = 0.00286853 Jy ! Component: 3850 - total flux cleaned = 0.0029294 Jy ! Component: 3900 - total flux cleaned = 0.00299011 Jy ! Component: 3950 - total flux cleaned = 0.00306245 Jy ! Component: 4000 - total flux cleaned = 0.0031224 Jy ! Component: 4050 - total flux cleaned = 0.00319393 Jy ! Total flux subtracted in 4096 components = 0.0031939 Jy ! Clean residual min=-0.000616 max=0.000804 Jy/beam ! Clean residual mean=-0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0595394 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 355 components and 0.0595394 Jy ![Exited script file: muppet] wmap "J0308+2355_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 6.973 at -7.017 degrees (North through East) ! Clean map min=-0.0013672 max=0.053766 Jy/beam ! Writing clean map to FITS file: J0308+2355_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0537659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218056 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2167 1.2167 2.43339 4.86679 9.73358 19.4672 38.9343 77.8686 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 6.973 at -7.017 degrees (North through East) ! Clean map min=-0.0013672 max=0.053766 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0308+2355_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:45:00 2019