! Started logfile: J0306+8200_S_2017_10_21_pus_uvs.log on Sat May 11 20:48:53 2019 obs J0306+8200_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0306+8200_S_2017_10_21_pus_uva.fits ! AN table 1: 217 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.964926 visibilities/baseline/integration-bin. ! Found source: J0306+8200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 30152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0306+8200_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1092 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983603Jy sigma=0.008988 ! Fit after self-cal, rms=0.950871Jy sigma=0.008709 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=4.134 mas, bpa=36.3 degrees ! Estimated noise=1101.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039481 Jy ! Component: 100 - total flux cleaned = 0.0483486 Jy ! Total flux subtracted in 100 components = 0.0483486 Jy ! Clean residual min=-0.003840 max=0.004140 Jy/beam ! Clean residual mean=-0.000019 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.0483486 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0483486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082162Jy sigma=0.000710 ! Fit after self-cal, rms=0.081594Jy sigma=0.000704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=5.395 mas, bpa=36.12 degrees ! Estimated noise=529.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437588 Jy ! Component: 100 - total flux cleaned = 0.00610863 Jy ! Component: 150 - total flux cleaned = 0.00697105 Jy ! Component: 200 - total flux cleaned = 0.00740389 Jy ! Total flux subtracted in 200 components = 0.00740389 Jy ! Clean residual min=-0.002411 max=0.002546 Jy/beam ! Clean residual mean=-0.000045 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0557525 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.0557525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081343Jy sigma=0.000703 ! Fit after self-cal, rms=0.081311Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 1.01 KP 1.16 ! LA 0.99 MK 1.05 NL 0.93 OV 1.06 ! PT 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.08 HN 1.04 KP 1.09 ! LA 1.02 MK 1.06 NL 0.88 OV 1.11 ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.02 KP 1.11 ! LA 0.86 MK 1.06 NL 1.13 OV 0.97 ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.02 KP 1.00* ! LA 0.79 MK 0.86 NL 1.00* OV 1.00* ! PT 0.72 ! ! ! Fit before self-cal, rms=0.081311Jy sigma=0.000702 ! Fit after self-cal, rms=0.080850Jy sigma=0.000699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.269 mas, bmaj=5.422 mas, bpa=35.11 degrees ! Estimated noise=532.952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185623 Jy ! Component: 100 - total flux cleaned = 0.00022549 Jy ! Component: 150 - total flux cleaned = 0.000214421 Jy ! Component: 200 - total flux cleaned = 0.000195246 Jy ! Total flux subtracted in 200 components = 0.000195246 Jy ! Clean residual min=-0.001645 max=0.001605 Jy/beam ! Clean residual mean=-0.000004 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0559477 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 24 components and 0.0559477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080845Jy sigma=0.000699 ! Fit after self-cal, rms=0.081102Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081102Jy sigma=0.000697 ! Fit after self-cal, rms=0.081924Jy sigma=0.000696 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=5.447 mas, bpa=34.11 degrees ! Estimated noise=536.169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21541e-05 Jy ! Component: 100 - total flux cleaned = 1.0221e-05 Jy ! Component: 150 - total flux cleaned = 2.79508e-05 Jy ! Component: 200 - total flux cleaned = 2.788e-05 Jy ! Total flux subtracted in 200 components = 2.788e-05 Jy ! Clean residual min=-0.001313 max=0.001361 Jy/beam ! Clean residual mean=0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0559756 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0559756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081922Jy sigma=0.000696 ! Fit after self-cal, rms=0.082173Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.71246e-06 Jy ! Component: 100 - total flux cleaned = 3.21258e-05 Jy ! Component: 150 - total flux cleaned = 3.27519e-05 Jy ! Component: 200 - total flux cleaned = 3.92978e-05 Jy ! Total flux subtracted in 200 components = 3.92978e-05 Jy ! Clean residual min=-0.001452 max=0.001512 Jy/beam ! Clean residual mean=-0.000003 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0560149 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.0560149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082171Jy sigma=0.000695 ! Fit after self-cal, rms=0.082171Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082171Jy sigma=0.000695 ! Fit after self-cal, rms=0.083340Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.307 mas, bmaj=5.46 mas, bpa=33.94 degrees ! Estimated noise=538.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.34943e-06 Jy ! Component: 100 - total flux cleaned = 1.90411e-05 Jy ! Component: 150 - total flux cleaned = 1.91959e-05 Jy ! Component: 200 - total flux cleaned = 1.27915e-05 Jy ! Total flux subtracted in 200 components = 1.27915e-05 Jy ! Clean residual min=-0.001394 max=0.001454 Jy/beam ! Clean residual mean=0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0560277 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0560277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083338Jy sigma=0.000695 ! Fit after self-cal, rms=0.083491Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.35905e-05 Jy ! Component: 100 - total flux cleaned = -3.08499e-05 Jy ! Component: 150 - total flux cleaned = -3.67046e-05 Jy ! Component: 200 - total flux cleaned = -3.65251e-05 Jy ! Total flux subtracted in 200 components = -3.65251e-05 Jy ! Clean residual min=-0.001426 max=0.001478 Jy/beam ! Clean residual mean=0.000000 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0559912 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0559912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083489Jy sigma=0.000695 ! Fit after self-cal, rms=0.083495Jy sigma=0.000695 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083495Jy sigma=0.000695 ! Fit after self-cal, rms=0.084246Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.304 mas, bmaj=11.03 mas, bpa=24.94 degrees ! Estimated noise=643.148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.96313e-05 Jy ! Component: 100 - total flux cleaned = -1.97116e-05 Jy ! Component: 150 - total flux cleaned = -2.55947e-05 Jy ! Component: 200 - total flux cleaned = -3.29406e-05 Jy ! Total flux subtracted in 200 components = -3.29406e-05 Jy ! Clean residual min=-0.001661 max=0.001872 Jy/beam ! Clean residual mean=0.000006 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0559582 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.0559582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084245Jy sigma=0.000695 ! Fit after self-cal, rms=0.084311Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.36345e-06 Jy ! Component: 100 - total flux cleaned = -1.06901e-05 Jy ! Component: 150 - total flux cleaned = -1.26791e-05 Jy ! Component: 200 - total flux cleaned = -1.44662e-05 Jy ! Total flux subtracted in 200 components = -1.44662e-05 Jy ! Clean residual min=-0.001676 max=0.001973 Jy/beam ! Clean residual mean=0.000004 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0559437 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.0559437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084311Jy sigma=0.000695 ! Fit after self-cal, rms=0.084305Jy sigma=0.000695 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=5.472 mas, bpa=33.69 degrees ! Estimated noise=539.988 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.309 x 5.472 at 33.69 degrees (North through East) ! Clean map min=-0.0013781 max=0.052667 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=4.139 mas, bpa=34.27 degrees ! Estimated noise=1117.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398998 Jy ! Component: 100 - total flux cleaned = 0.049119 Jy ! Component: 150 - total flux cleaned = 0.0527046 Jy ! Component: 200 - total flux cleaned = 0.0544909 Jy ! Total flux subtracted in 200 components = 0.0544909 Jy ! Clean residual min=-0.002896 max=0.002914 Jy/beam ! Clean residual mean=-0.000003 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0544909 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0544909 Jy ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=5.472 mas, bpa=33.69 degrees ! Estimated noise=539.988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899548 Jy ! Component: 100 - total flux cleaned = 0.00102765 Jy ! Component: 150 - total flux cleaned = 0.00114574 Jy ! Component: 200 - total flux cleaned = 0.00121514 Jy ! Total flux subtracted in 200 components = 0.00121514 Jy ! Clean residual min=-0.001420 max=0.001532 Jy/beam ! Clean residual mean=0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0557061 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0557061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.304 mas, bmaj=11.03 mas, bpa=24.94 degrees ! Estimated noise=643.148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107194 Jy ! Component: 100 - total flux cleaned = 0.000121812 Jy ! Component: 150 - total flux cleaned = 0.00012989 Jy ! Component: 200 - total flux cleaned = 0.00013671 Jy ! Total flux subtracted in 200 components = 0.00013671 Jy ! Clean residual min=-0.001670 max=0.001962 Jy/beam ! Clean residual mean=0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0558428 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.86514e-06 Jy ! Component: 100 - total flux cleaned = 8.3759e-06 Jy ! Component: 150 - total flux cleaned = 5.96405e-06 Jy ! Component: 200 - total flux cleaned = 5.85759e-06 Jy ! Total flux subtracted in 200 components = 5.85759e-06 Jy ! Clean residual min=-0.001671 max=0.001963 Jy/beam ! Clean residual mean=0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0558486 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0558486 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=5.472 mas, bpa=33.69 degrees ! Estimated noise=539.988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.50026e-05 Jy ! Component: 100 - total flux cleaned = -6.47601e-05 Jy ! Component: 150 - total flux cleaned = -5.70957e-05 Jy ! Component: 200 - total flux cleaned = -5.05196e-05 Jy ! Total flux subtracted in 200 components = -5.05196e-05 Jy ! Clean residual min=-0.001407 max=0.001549 Jy/beam ! Clean residual mean=0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0557981 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0557981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084305Jy sigma=0.000695 ! Fit after self-cal, rms=0.084306Jy sigma=0.000695 wmodel J0306+8200_S_2017_10_21_pus_map.mod ! Writing 39 model components to file: J0306+8200_S_2017_10_21_pus_map.mod wobs J0306+8200_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0306+8200_S_2017_10_21_pus_uvs.fits wwins J0306+8200_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0306+8200_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174358 Jy ! Component: 100 - total flux cleaned = 0.000349808 Jy ! Component: 150 - total flux cleaned = 0.000542809 Jy ! Component: 200 - total flux cleaned = 0.000682011 Jy ! Component: 250 - total flux cleaned = 0.000816385 Jy ! Component: 300 - total flux cleaned = 0.000925109 Jy ! Component: 350 - total flux cleaned = 0.00103214 Jy ! Component: 400 - total flux cleaned = 0.00119872 Jy ! Component: 450 - total flux cleaned = 0.00132037 Jy ! Component: 500 - total flux cleaned = 0.00136026 Jy ! Component: 550 - total flux cleaned = 0.00145787 Jy ! Component: 600 - total flux cleaned = 0.00153431 Jy ! Component: 650 - total flux cleaned = 0.00159079 Jy ! Component: 700 - total flux cleaned = 0.00166456 Jy ! Component: 750 - total flux cleaned = 0.00171895 Jy ! Component: 800 - total flux cleaned = 0.00186149 Jy ! Component: 850 - total flux cleaned = 0.00193127 Jy ! Component: 900 - total flux cleaned = 0.00196596 Jy ! Component: 950 - total flux cleaned = 0.00198311 Jy ! Component: 1000 - total flux cleaned = 0.00205051 Jy ! Component: 1050 - total flux cleaned = 0.0021165 Jy ! Component: 1100 - total flux cleaned = 0.00208393 Jy ! Component: 1150 - total flux cleaned = 0.00211621 Jy ! Component: 1200 - total flux cleaned = 0.00213216 Jy ! Component: 1250 - total flux cleaned = 0.00217907 Jy ! Component: 1300 - total flux cleaned = 0.00214806 Jy ! Component: 1350 - total flux cleaned = 0.00216326 Jy ! Component: 1400 - total flux cleaned = 0.00219357 Jy ! Component: 1450 - total flux cleaned = 0.00219382 Jy ! Component: 1500 - total flux cleaned = 0.00222338 Jy ! Component: 1550 - total flux cleaned = 0.00223809 Jy ! Component: 1600 - total flux cleaned = 0.00229588 Jy ! Component: 1650 - total flux cleaned = 0.00232473 Jy ! Component: 1700 - total flux cleaned = 0.00239506 Jy ! Component: 1750 - total flux cleaned = 0.00242291 Jy ! Component: 1800 - total flux cleaned = 0.00243662 Jy ! Component: 1850 - total flux cleaned = 0.00245012 Jy ! Component: 1900 - total flux cleaned = 0.00249063 Jy ! Component: 1950 - total flux cleaned = 0.00246395 Jy ! Component: 2000 - total flux cleaned = 0.00249027 Jy ! Component: 2050 - total flux cleaned = 0.00252937 Jy ! Component: 2100 - total flux cleaned = 0.00247751 Jy ! Component: 2150 - total flux cleaned = 0.00250315 Jy ! Component: 2200 - total flux cleaned = 0.0024523 Jy ! Component: 2250 - total flux cleaned = 0.00243967 Jy ! Component: 2300 - total flux cleaned = 0.00241481 Jy ! Component: 2350 - total flux cleaned = 0.0024273 Jy ! Component: 2400 - total flux cleaned = 0.00242736 Jy ! Component: 2450 - total flux cleaned = 0.00242739 Jy ! Component: 2500 - total flux cleaned = 0.00245134 Jy ! Component: 2550 - total flux cleaned = 0.00241591 Jy ! Component: 2600 - total flux cleaned = 0.00245128 Jy ! Component: 2650 - total flux cleaned = 0.00243963 Jy ! Component: 2700 - total flux cleaned = 0.00247448 Jy ! Component: 2750 - total flux cleaned = 0.00249749 Jy ! Component: 2800 - total flux cleaned = 0.00252034 Jy ! Component: 2850 - total flux cleaned = 0.0025543 Jy ! Component: 2900 - total flux cleaned = 0.0025431 Jy ! Component: 2950 - total flux cleaned = 0.00258777 Jy ! Component: 3000 - total flux cleaned = 0.0025768 Jy ! Component: 3050 - total flux cleaned = 0.00262059 Jy ! Component: 3100 - total flux cleaned = 0.00263151 Jy ! Component: 3150 - total flux cleaned = 0.00267464 Jy ! Component: 3200 - total flux cleaned = 0.00271737 Jy ! Component: 3250 - total flux cleaned = 0.00272811 Jy ! Component: 3300 - total flux cleaned = 0.00278089 Jy ! Component: 3350 - total flux cleaned = 0.00280191 Jy ! Component: 3400 - total flux cleaned = 0.00287482 Jy ! Component: 3450 - total flux cleaned = 0.00290572 Jy ! Component: 3500 - total flux cleaned = 0.00295722 Jy ! Component: 3550 - total flux cleaned = 0.00298793 Jy ! Component: 3600 - total flux cleaned = 0.00305905 Jy ! Component: 3650 - total flux cleaned = 0.00314984 Jy ! Component: 3700 - total flux cleaned = 0.00317984 Jy ! Component: 3750 - total flux cleaned = 0.00320973 Jy ! Component: 3800 - total flux cleaned = 0.00327902 Jy ! Component: 3850 - total flux cleaned = 0.0032888 Jy ! Component: 3900 - total flux cleaned = 0.00334758 Jy ! Component: 3950 - total flux cleaned = 0.00337669 Jy ! Component: 4000 - total flux cleaned = 0.00345402 Jy ! Component: 4050 - total flux cleaned = 0.00345401 Jy ! Total flux subtracted in 4096 components = 0.00346362 Jy ! Clean residual min=-0.000613 max=0.000592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0592617 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 327 components and 0.0592617 Jy ![Exited script file: muppet] wmap "J0306+8200_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.309 x 5.472 at 33.69 degrees (North through East) ! Clean map min=-0.0011006 max=0.052736 Jy/beam ! Writing clean map to FITS file: J0306+8200_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0527355 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172762 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.982804 0.982804 1.96561 3.93121 7.86243 15.7249 31.4497 62.8994 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.309 x 5.472 at 33.69 degrees (North through East) ! Clean map min=-0.0011006 max=0.052736 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0306+8200_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:48:58 2019