! Started logfile: J0306+6243_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:08 2019 obs J0306+6243_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0306+6243_S_2017_09_26_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.709402 visibilities/baseline/integration-bin. ! Found source: J0306+6243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0306+6243_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.795289Jy sigma=0.008153 ! Fit after self-cal, rms=0.792138Jy sigma=0.008121 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=10.6 mas, bpa=-4.489 degrees ! Estimated noise=2721.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157308 Jy ! Component: 100 - total flux cleaned = 0.204287 Jy ! Total flux subtracted in 100 components = 0.204287 Jy ! Clean residual min=-0.015199 max=0.020868 Jy/beam ! Clean residual mean=0.000044 rms=0.004328 Jy/beam ! Combined flux in latest and established models = 0.204287 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.204287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080134Jy sigma=0.000772 ! Fit after self-cal, rms=0.080156Jy sigma=0.000772 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=10.73 mas, bpa=-4.336 degrees ! Estimated noise=2092.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251204 Jy ! Component: 100 - total flux cleaned = 0.0368516 Jy ! Component: 150 - total flux cleaned = 0.0442897 Jy ! Component: 200 - total flux cleaned = 0.0492704 Jy ! Total flux subtracted in 200 components = 0.0492704 Jy ! Clean residual min=-0.007073 max=0.006615 Jy/beam ! Clean residual mean=0.000018 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.253558 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 53 components and 0.253558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072121Jy sigma=0.000690 ! Fit after self-cal, rms=0.072139Jy sigma=0.000690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.88 KP 1.05 ! LA 0.96 MK 1.00 NL 0.92 OV 1.03 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.03 KP 1.01 ! LA 0.98 MK 1.07 NL 1.02 OV 1.08 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.06 KP 1.00 ! LA 1.02 MK 1.07 NL 0.96 OV 1.01 ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.12 KP 1.00* ! LA 1.07 MK 1.05 NL 1.00* OV 0.68 ! PT 1.06 ! ! ! Fit before self-cal, rms=0.072139Jy sigma=0.000690 ! Fit after self-cal, rms=0.067730Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=10.75 mas, bpa=-4.401 degrees ! Estimated noise=2086.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249625 Jy ! Component: 100 - total flux cleaned = 0.00348228 Jy ! Component: 150 - total flux cleaned = 0.00376707 Jy ! Component: 200 - total flux cleaned = 0.00382392 Jy ! Total flux subtracted in 200 components = 0.00382392 Jy ! Clean residual min=-0.005621 max=0.005205 Jy/beam ! Clean residual mean=0.000010 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.257382 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.257382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067634Jy sigma=0.000660 ! Fit after self-cal, rms=0.067622Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067622Jy sigma=0.000659 ! Fit after self-cal, rms=0.067595Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=10.73 mas, bpa=-4.438 degrees ! Estimated noise=2086.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135324 Jy ! Component: 100 - total flux cleaned = 0.00201975 Jy ! Component: 150 - total flux cleaned = 0.00215433 Jy ! Component: 200 - total flux cleaned = 0.00217274 Jy ! Total flux subtracted in 200 components = 0.00217274 Jy ! Clean residual min=-0.005501 max=0.005105 Jy/beam ! Clean residual mean=0.000009 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.259554 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.259554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067563Jy sigma=0.000659 ! Fit after self-cal, rms=0.067562Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84067e-05 Jy ! Component: 100 - total flux cleaned = -3.50373e-05 Jy ! Component: 150 - total flux cleaned = -3.42987e-05 Jy ! Component: 200 - total flux cleaned = -1.95183e-05 Jy ! Total flux subtracted in 200 components = -1.95183e-05 Jy ! Clean residual min=-0.005509 max=0.005049 Jy/beam ! Clean residual mean=0.000010 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.259535 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.259535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067556Jy sigma=0.000659 ! Fit after self-cal, rms=0.067555Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067555Jy sigma=0.000659 ! Fit after self-cal, rms=0.067573Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=10.71 mas, bpa=-4.448 degrees ! Estimated noise=2087.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751995 Jy ! Component: 100 - total flux cleaned = 0.000997413 Jy ! Component: 150 - total flux cleaned = 0.00113991 Jy ! Component: 200 - total flux cleaned = 0.00120663 Jy ! Total flux subtracted in 200 components = 0.00120663 Jy ! Clean residual min=-0.005388 max=0.005003 Jy/beam ! Clean residual mean=0.000009 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.260742 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.260742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067560Jy sigma=0.000659 ! Fit after self-cal, rms=0.067561Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.50588e-05 Jy ! Component: 100 - total flux cleaned = 3.73127e-05 Jy ! Component: 150 - total flux cleaned = 2.58937e-05 Jy ! Component: 200 - total flux cleaned = 2.56003e-05 Jy ! Total flux subtracted in 200 components = 2.56003e-05 Jy ! Clean residual min=-0.005398 max=0.004981 Jy/beam ! Clean residual mean=0.000009 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.260767 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.260767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067555Jy sigma=0.000659 ! Fit after self-cal, rms=0.067556Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067556Jy sigma=0.000659 ! Fit after self-cal, rms=0.067586Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.094 mas, bmaj=11.45 mas, bpa=-7.322 degrees ! Estimated noise=2526.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000842144 Jy ! Component: 100 - total flux cleaned = 0.000783345 Jy ! Component: 150 - total flux cleaned = 0.000767265 Jy ! Component: 200 - total flux cleaned = 0.000735996 Jy ! Total flux subtracted in 200 components = 0.000735996 Jy ! Clean residual min=-0.003680 max=0.003744 Jy/beam ! Clean residual mean=0.000016 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.261503 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 86 components and 0.261503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067590Jy sigma=0.000659 ! Fit after self-cal, rms=0.067590Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25917e-05 Jy ! Component: 100 - total flux cleaned = 1.69855e-05 Jy ! Component: 150 - total flux cleaned = -1.29239e-05 Jy ! Component: 200 - total flux cleaned = -2.76538e-05 Jy ! Total flux subtracted in 200 components = -2.76538e-05 Jy ! Clean residual min=-0.003631 max=0.003680 Jy/beam ! Clean residual mean=0.000016 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.261476 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 0.261476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067600Jy sigma=0.000659 ! Fit after self-cal, rms=0.067599Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.7 mas, bpa=-4.447 degrees ! Estimated noise=2088.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.7 at -4.447 degrees (North through East) ! Clean map min=-0.0049568 max=0.21017 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=10.59 mas, bpa=-4.628 degrees ! Estimated noise=2708.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156305 Jy ! Component: 100 - total flux cleaned = 0.200686 Jy ! Component: 150 - total flux cleaned = 0.221862 Jy ! Component: 200 - total flux cleaned = 0.233032 Jy ! Total flux subtracted in 200 components = 0.233032 Jy ! Clean residual min=-0.007161 max=0.008889 Jy/beam ! Clean residual mean=0.000025 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.233032 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.233032 Jy ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.7 mas, bpa=-4.447 degrees ! Estimated noise=2088.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (99, 94.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101587 Jy ! Component: 100 - total flux cleaned = 0.0166188 Jy ! Component: 150 - total flux cleaned = 0.0209804 Jy ! Component: 200 - total flux cleaned = 0.0241037 Jy ! Total flux subtracted in 200 components = 0.0241037 Jy ! Clean residual min=-0.005449 max=0.004302 Jy/beam ! Clean residual mean=0.000020 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.257136 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 70 components and 0.257136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.094 mas, bmaj=11.45 mas, bpa=-7.322 degrees ! Estimated noise=2526.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256125 Jy ! Component: 100 - total flux cleaned = 0.00356699 Jy ! Component: 150 - total flux cleaned = 0.00416504 Jy ! Component: 200 - total flux cleaned = 0.00436593 Jy ! Total flux subtracted in 200 components = 0.00436593 Jy ! Clean residual min=-0.003634 max=0.003598 Jy/beam ! Clean residual mean=0.000021 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.261502 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135125 Jy ! Component: 100 - total flux cleaned = 0.000260218 Jy ! Component: 150 - total flux cleaned = 0.000259118 Jy ! Component: 200 - total flux cleaned = 0.000332684 Jy ! Total flux subtracted in 200 components = 0.000332684 Jy ! Clean residual min=-0.003343 max=0.003478 Jy/beam ! Clean residual mean=0.000020 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.261834 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 102 components and 0.261834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.7 mas, bpa=-4.447 degrees ! Estimated noise=2088.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169437 Jy ! Component: 100 - total flux cleaned = -0.000255658 Jy ! Component: 150 - total flux cleaned = -0.000186648 Jy ! Component: 200 - total flux cleaned = -5.32217e-05 Jy ! Total flux subtracted in 200 components = -5.32217e-05 Jy ! Clean residual min=-0.004148 max=0.004445 Jy/beam ! Clean residual mean=0.000011 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.261781 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.261781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067213Jy sigma=0.000655 ! Fit after self-cal, rms=0.067188Jy sigma=0.000655 wmodel J0306+6243_S_2017_09_26_pus_map.mod ! Writing 115 model components to file: J0306+6243_S_2017_09_26_pus_map.mod wobs J0306+6243_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0306+6243_S_2017_09_26_pus_uvs.fits wwins J0306+6243_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0306+6243_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567181 Jy ! Component: 100 - total flux cleaned = 0.00134694 Jy ! Component: 150 - total flux cleaned = 0.00206369 Jy ! Component: 200 - total flux cleaned = 0.00251045 Jy ! Component: 250 - total flux cleaned = 0.00282403 Jy ! Component: 300 - total flux cleaned = 0.00311956 Jy ! Component: 350 - total flux cleaned = 0.00321419 Jy ! Component: 400 - total flux cleaned = 0.00325974 Jy ! Component: 450 - total flux cleaned = 0.00334863 Jy ! Component: 500 - total flux cleaned = 0.00334991 Jy ! Component: 550 - total flux cleaned = 0.00330818 Jy ! Component: 600 - total flux cleaned = 0.00322741 Jy ! Component: 650 - total flux cleaned = 0.00314908 Jy ! Component: 700 - total flux cleaned = 0.00299646 Jy ! Component: 750 - total flux cleaned = 0.00292189 Jy ! Component: 800 - total flux cleaned = 0.002775 Jy ! Component: 850 - total flux cleaned = 0.00270377 Jy ! Component: 900 - total flux cleaned = 0.00259874 Jy ! Component: 950 - total flux cleaned = 0.00259867 Jy ! Component: 1000 - total flux cleaned = 0.00253232 Jy ! Component: 1050 - total flux cleaned = 0.00246706 Jy ! Component: 1100 - total flux cleaned = 0.0024355 Jy ! Component: 1150 - total flux cleaned = 0.00240451 Jy ! Component: 1200 - total flux cleaned = 0.0022824 Jy ! Component: 1250 - total flux cleaned = 0.00228257 Jy ! Component: 1300 - total flux cleaned = 0.0023121 Jy ! Component: 1350 - total flux cleaned = 0.00234063 Jy ! Component: 1400 - total flux cleaned = 0.00234045 Jy ! Component: 1450 - total flux cleaned = 0.00234038 Jy ! Component: 1500 - total flux cleaned = 0.00234037 Jy ! Component: 1550 - total flux cleaned = 0.00242124 Jy ! Component: 1600 - total flux cleaned = 0.00247441 Jy ! Component: 1650 - total flux cleaned = 0.00257886 Jy ! Component: 1700 - total flux cleaned = 0.00255284 Jy ! Component: 1750 - total flux cleaned = 0.00262917 Jy ! Component: 1800 - total flux cleaned = 0.00257934 Jy ! Component: 1850 - total flux cleaned = 0.00253086 Jy ! Component: 1900 - total flux cleaned = 0.00253079 Jy ! Component: 1950 - total flux cleaned = 0.00245882 Jy ! Component: 2000 - total flux cleaned = 0.00241151 Jy ! Component: 2050 - total flux cleaned = 0.00234096 Jy ! Component: 2100 - total flux cleaned = 0.00231791 Jy ! Component: 2150 - total flux cleaned = 0.00227218 Jy ! Component: 2200 - total flux cleaned = 0.00222666 Jy ! Component: 2250 - total flux cleaned = 0.00213716 Jy ! Component: 2300 - total flux cleaned = 0.00209296 Jy ! Component: 2350 - total flux cleaned = 0.00207132 Jy ! Component: 2400 - total flux cleaned = 0.00198481 Jy ! Component: 2450 - total flux cleaned = 0.0020063 Jy ! Component: 2500 - total flux cleaned = 0.00200618 Jy ! Component: 2550 - total flux cleaned = 0.00194299 Jy ! Component: 2600 - total flux cleaned = 0.00190133 Jy ! Component: 2650 - total flux cleaned = 0.00190141 Jy ! Component: 2700 - total flux cleaned = 0.00190135 Jy ! Component: 2750 - total flux cleaned = 0.00188116 Jy ! Component: 2800 - total flux cleaned = 0.0018206 Jy ! Component: 2850 - total flux cleaned = 0.00176048 Jy ! Component: 2900 - total flux cleaned = 0.001701 Jy ! Component: 2950 - total flux cleaned = 0.00164198 Jy ! Component: 3000 - total flux cleaned = 0.00166153 Jy ! Component: 3050 - total flux cleaned = 0.00160289 Jy ! Component: 3100 - total flux cleaned = 0.00156425 Jy ! Component: 3150 - total flux cleaned = 0.00152582 Jy ! Component: 3200 - total flux cleaned = 0.00150685 Jy ! Component: 3250 - total flux cleaned = 0.0015261 Jy ! Component: 3300 - total flux cleaned = 0.00148812 Jy ! Component: 3350 - total flux cleaned = 0.00145043 Jy ! Component: 3400 - total flux cleaned = 0.0014878 Jy ! Component: 3450 - total flux cleaned = 0.00146924 Jy ! Component: 3500 - total flux cleaned = 0.00148779 Jy ! Component: 3550 - total flux cleaned = 0.00152463 Jy ! Component: 3600 - total flux cleaned = 0.00156133 Jy ! Component: 3650 - total flux cleaned = 0.00154319 Jy ! Component: 3700 - total flux cleaned = 0.00161579 Jy ! Component: 3750 - total flux cleaned = 0.00163375 Jy ! Component: 3800 - total flux cleaned = 0.00163379 Jy ! Component: 3850 - total flux cleaned = 0.00165171 Jy ! Component: 3900 - total flux cleaned = 0.00159816 Jy ! Component: 3950 - total flux cleaned = 0.00165148 Jy ! Component: 4000 - total flux cleaned = 0.00166889 Jy ! Component: 4050 - total flux cleaned = 0.00163352 Jy ! Total flux subtracted in 4096 components = 0.00165115 Jy ! Clean residual min=-0.001256 max=0.000932 Jy/beam ! Clean residual mean=-0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.263432 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 356 components and 0.263432 Jy ![Exited script file: muppet] wmap "J0306+6243_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.7 at -4.447 degrees (North through East) ! Clean map min=-0.0027329 max=0.20955 Jy/beam ! Writing clean map to FITS file: J0306+6243_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.209549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000268856 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.384906 0.384906 0.769812 1.53962 3.07925 6.15849 12.317 24.634 49.2679 98.5359 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.209 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.7 at -4.447 degrees (North through East) ! Clean map min=-0.0027329 max=0.20955 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0306+6243_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:12 2019