! Started logfile: J0304-4333_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:18 2019 obs J0304-4333_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0304-4333_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.185057 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0304-4333 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 3864 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0304-4333_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 867 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 843 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 791 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1179 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901570Jy sigma=0.005062 ! Fit after self-cal, rms=0.844663Jy sigma=0.004786 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=62.89 mas, bpa=-15.38 degrees ! Estimated noise=3804.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11741 Jy ! Component: 100 - total flux cleaned = 0.145493 Jy ! Total flux subtracted in 100 components = 0.145493 Jy ! Clean residual min=-0.011540 max=0.012064 Jy/beam ! Clean residual mean=-0.000260 rms=0.003915 Jy/beam ! Combined flux in latest and established models = 0.145493 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.145493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130916Jy sigma=0.000650 ! Fit after self-cal, rms=0.130922Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=70.28 mas, bpa=-15.43 degrees ! Estimated noise=2707.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201031 Jy ! Component: 100 - total flux cleaned = 0.0266807 Jy ! Component: 150 - total flux cleaned = 0.0276628 Jy ! Component: 200 - total flux cleaned = 0.0274421 Jy ! Total flux subtracted in 200 components = 0.0274421 Jy ! Clean residual min=-0.003741 max=0.003731 Jy/beam ! Clean residual mean=-0.000144 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.172935 Jy ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 113 components and 0.172935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126992Jy sigma=0.000631 ! Fit after self-cal, rms=0.126973Jy sigma=0.000631 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.08 ! LA 1.01 MK 0.97 NL 1.05 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 0.99 MK 0.97 NL 0.99 OV 1.00* ! PT 0.90 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.90 ! LA 0.80 MK 1.23 NL 1.23 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.126973Jy sigma=0.000631 ! Fit after self-cal, rms=0.127879Jy sigma=0.000629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=72.55 mas, bpa=-15.59 degrees ! Estimated noise=3016.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177183 Jy ! Component: 100 - total flux cleaned = 0.000506965 Jy ! Component: 150 - total flux cleaned = -0.000642295 Jy ! Component: 200 - total flux cleaned = -0.00124299 Jy ! Total flux subtracted in 200 components = -0.00124299 Jy ! Clean residual min=-0.001926 max=0.001920 Jy/beam ! Clean residual mean=-0.000009 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.171692 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 153 components and 0.171692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127628Jy sigma=0.000628 ! Fit after self-cal, rms=0.127637Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127637Jy sigma=0.000627 ! Fit after self-cal, rms=0.128655Jy sigma=0.000627 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=72.6 mas, bpa=-15.6 degrees ! Estimated noise=3021.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415774 Jy ! Component: 100 - total flux cleaned = -0.000398886 Jy ! Component: 150 - total flux cleaned = -0.00118614 Jy ! Component: 200 - total flux cleaned = -0.0020487 Jy ! Total flux subtracted in 200 components = -0.0020487 Jy ! Clean residual min=-0.001573 max=0.001540 Jy/beam ! Clean residual mean=0.000020 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.169644 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 186 components and 0.169644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128527Jy sigma=0.000626 ! Fit after self-cal, rms=0.128545Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397782 Jy ! Component: 100 - total flux cleaned = -0.000295659 Jy ! Component: 150 - total flux cleaned = -0.00113315 Jy ! Component: 200 - total flux cleaned = -0.00195269 Jy ! Total flux subtracted in 200 components = -0.00195269 Jy ! Clean residual min=-0.001360 max=0.001356 Jy/beam ! Clean residual mean=0.000020 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.167691 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 212 components and 0.167691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128454Jy sigma=0.000625 ! Fit after self-cal, rms=0.128439Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128439Jy sigma=0.000625 ! Fit after self-cal, rms=0.129818Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=72.75 mas, bpa=-15.59 degrees ! Estimated noise=3055.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000929451 Jy ! Component: 100 - total flux cleaned = 0.000742845 Jy ! Component: 150 - total flux cleaned = 0.000276234 Jy ! Component: 200 - total flux cleaned = 8.53418e-05 Jy ! Total flux subtracted in 200 components = 8.53418e-05 Jy ! Clean residual min=-0.001579 max=0.001561 Jy/beam ! Clean residual mean=0.000025 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.167776 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 239 components and 0.167776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129712Jy sigma=0.000623 ! Fit after self-cal, rms=0.129785Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370448 Jy ! Component: 100 - total flux cleaned = -0.000602734 Jy ! Component: 150 - total flux cleaned = -0.000452001 Jy ! Component: 200 - total flux cleaned = -0.000167815 Jy ! Total flux subtracted in 200 components = -0.000167815 Jy ! Clean residual min=-0.001186 max=0.001177 Jy/beam ! Clean residual mean=0.000009 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.167608 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 271 components and 0.167608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129710Jy sigma=0.000623 ! Fit after self-cal, rms=0.129723Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129723Jy sigma=0.000623 ! Fit after self-cal, rms=0.130447Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.45 mas, bmaj=79.44 mas, bpa=-10.77 degrees ! Estimated noise=3647.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242638 Jy ! Component: 100 - total flux cleaned = 0.00070758 Jy ! Component: 150 - total flux cleaned = 0.000881878 Jy ! Component: 200 - total flux cleaned = 0.00100954 Jy ! Total flux subtracted in 200 components = 0.00100954 Jy ! Clean residual min=-0.000719 max=0.000713 Jy/beam ! Clean residual mean=0.000007 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.168618 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 325 components and 0.168618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130415Jy sigma=0.000622 ! Fit after self-cal, rms=0.130425Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493572 Jy ! Component: 100 - total flux cleaned = 0.000693642 Jy ! Component: 150 - total flux cleaned = 0.000949499 Jy ! Component: 200 - total flux cleaned = 0.00132952 Jy ! Total flux subtracted in 200 components = 0.00132952 Jy ! Clean residual min=-0.000432 max=0.000432 Jy/beam ! Clean residual mean=-0.000006 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.169947 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 380 components and 0.169947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130408Jy sigma=0.000622 ! Fit after self-cal, rms=0.130409Jy sigma=0.000622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=72.82 mas, bpa=-15.59 degrees ! Estimated noise=3074.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 72.82 at -15.59 degrees (North through East) ! Clean map min=-0.0074905 max=0.15438 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=66.7 mas, bpa=-15.79 degrees ! Estimated noise=4155.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120668 Jy ! Component: 100 - total flux cleaned = 0.144335 Jy ! Component: 150 - total flux cleaned = 0.15166 Jy ! Component: 200 - total flux cleaned = 0.152115 Jy ! Total flux subtracted in 200 components = 0.152115 Jy ! Clean residual min=-0.006101 max=0.006113 Jy/beam ! Clean residual mean=-0.000141 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 0.152115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.152115 Jy ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=72.82 mas, bpa=-15.59 degrees ! Estimated noise=3074.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384655 Jy ! Component: 100 - total flux cleaned = 0.00418463 Jy ! Component: 150 - total flux cleaned = 0.00359884 Jy ! Component: 200 - total flux cleaned = 0.00226743 Jy ! Total flux subtracted in 200 components = 0.00226743 Jy ! Clean residual min=-0.003012 max=0.002989 Jy/beam ! Clean residual mean=-0.000153 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.154383 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 117 components and 0.154383 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.45 mas, bmaj=79.44 mas, bpa=-10.77 degrees ! Estimated noise=3647.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167649 Jy ! Component: 100 - total flux cleaned = 0.00144257 Jy ! Component: 150 - total flux cleaned = 0.000217438 Jy ! Component: 200 - total flux cleaned = -0.00164542 Jy ! Total flux subtracted in 200 components = -0.00164542 Jy ! Clean residual min=-0.001222 max=0.001172 Jy/beam ! Clean residual mean=-0.000082 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.152737 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145986 Jy ! Component: 100 - total flux cleaned = -0.00198551 Jy ! Component: 150 - total flux cleaned = -0.00269253 Jy ! Component: 200 - total flux cleaned = -0.00370405 Jy ! Total flux subtracted in 200 components = -0.00370405 Jy ! Clean residual min=-0.001482 max=0.001478 Jy/beam ! Clean residual mean=-0.000075 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.149033 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 210 components and 0.149033 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.652 mas, bmaj=72.82 mas, bpa=-15.59 degrees ! Estimated noise=3074.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.41134e-05 Jy ! Component: 100 - total flux cleaned = -0.000312925 Jy ! Component: 150 - total flux cleaned = -0.00049148 Jy ! Component: 200 - total flux cleaned = -0.00083947 Jy ! Total flux subtracted in 200 components = -0.00083947 Jy ! Clean residual min=-0.001436 max=0.001438 Jy/beam ! Clean residual mean=-0.000029 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.148194 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 255 components and 0.148194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130615Jy sigma=0.000624 ! Fit after self-cal, rms=0.130584Jy sigma=0.000624 wmodel J0304-4333_S_2017_10_09_pus_map.mod ! Writing 255 model components to file: J0304-4333_S_2017_10_09_pus_map.mod wobs J0304-4333_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0304-4333_S_2017_10_09_pus_uvs.fits wwins J0304-4333_S_2017_10_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0304-4333_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 72.82 at -15.59 degrees (North through East) ! Clean map min=-0.0048541 max=0.14925 Jy/beam ! Writing clean map to FITS file: J0304-4333_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.149252 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000438165 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.880724 0.880724 1.76145 3.52289 7.04579 14.0916 28.1832 56.3663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.149 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.652 x 72.82 at -15.59 degrees (North through East) ! Clean map min=-0.0048541 max=0.14925 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0304-4333_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:23 2019