! Started logfile: J0300-0531_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:02:51 2019 obs J0300-0531_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0300-0531_S_2017_01_16_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.718783 visibilities/baseline/integration-bin. ! Found source: J0300-0531 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0300-0531_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859418Jy sigma=0.005527 ! Fit after self-cal, rms=0.828088Jy sigma=0.005391 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.535 mas, bmaj=9.455 mas, bpa=18.2 degrees ! Estimated noise=1419.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144888 Jy ! Component: 100 - total flux cleaned = 0.181203 Jy ! Total flux subtracted in 100 components = 0.181203 Jy ! Clean residual min=-0.009738 max=0.015601 Jy/beam ! Clean residual mean=-0.000023 rms=0.002913 Jy/beam ! Combined flux in latest and established models = 0.181203 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.181203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156102Jy sigma=0.000723 ! Fit after self-cal, rms=0.156093Jy sigma=0.000722 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.238 mas, bmaj=10.58 mas, bpa=17.73 degrees ! Estimated noise=1112.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184196 Jy ! Component: 100 - total flux cleaned = 0.0269678 Jy ! Component: 150 - total flux cleaned = 0.0315042 Jy ! Component: 200 - total flux cleaned = 0.0322548 Jy ! Total flux subtracted in 200 components = 0.0322548 Jy ! Clean residual min=-0.007257 max=0.009504 Jy/beam ! Clean residual mean=-0.000021 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 0.213458 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.213458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154235Jy sigma=0.000701 ! Fit after self-cal, rms=0.154170Jy sigma=0.000700 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 0.96 KP 0.94 ! LA 1.01 MK 1.00* NL 0.86 OV 0.96 ! PT 1.22 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.05 KP 0.91 ! LA 0.97 MK 1.00* NL 0.97 OV 1.01 ! PT 1.18 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 1.01 KP 0.97 ! LA 0.99 MK 1.00* NL 0.96 OV 0.92 ! PT 1.28 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.97 KP 0.94 ! LA 0.76 MK 1.00* NL 1.00* OV 0.94 ! PT 1.19 SC 0.95 ! ! ! Fit before self-cal, rms=0.154170Jy sigma=0.000700 ! Fit after self-cal, rms=0.142150Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.195 mas, bmaj=10.51 mas, bpa=17.87 degrees ! Estimated noise=1085.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274721 Jy ! Component: 100 - total flux cleaned = 0.000222671 Jy ! Component: 150 - total flux cleaned = 0.000123174 Jy ! Component: 200 - total flux cleaned = 4.12123e-05 Jy ! Total flux subtracted in 200 components = 4.12123e-05 Jy ! Clean residual min=-0.006272 max=0.007459 Jy/beam ! Clean residual mean=-0.000033 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.213499 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.213499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141854Jy sigma=0.000683 ! Fit after self-cal, rms=0.141907Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141907Jy sigma=0.000683 ! Fit after self-cal, rms=0.165189Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.182 mas, bmaj=10.53 mas, bpa=17.26 degrees ! Estimated noise=1091.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199552 Jy ! Component: 100 - total flux cleaned = 0.00210024 Jy ! Component: 150 - total flux cleaned = 0.00210107 Jy ! Component: 200 - total flux cleaned = 0.00206502 Jy ! Total flux subtracted in 200 components = 0.00206502 Jy ! Clean residual min=-0.003049 max=0.004173 Jy/beam ! Clean residual mean=-0.000016 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.215564 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.215564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165160Jy sigma=0.000660 ! Fit after self-cal, rms=0.165580Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435738 Jy ! Component: 100 - total flux cleaned = 0.00590055 Jy ! Component: 150 - total flux cleaned = 0.00592359 Jy ! Component: 200 - total flux cleaned = 0.00586905 Jy ! Total flux subtracted in 200 components = 0.00586905 Jy ! Clean residual min=-0.002895 max=0.003528 Jy/beam ! Clean residual mean=-0.000017 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.221433 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 90 components and 0.221433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165447Jy sigma=0.000658 ! Fit after self-cal, rms=0.165428Jy sigma=0.000658 ! Inverting map ! Added new window around map position (-58, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025122 Jy ! Component: 100 - total flux cleaned = 0.00301856 Jy ! Component: 150 - total flux cleaned = 0.00296887 Jy ! Component: 200 - total flux cleaned = 0.00272352 Jy ! Total flux subtracted in 200 components = 0.00272352 Jy ! Clean residual min=-0.002716 max=0.002517 Jy/beam ! Clean residual mean=-0.000013 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.224157 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 112 components and 0.224157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165353Jy sigma=0.000657 ! Fit after self-cal, rms=0.165343Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165343Jy sigma=0.000657 ! Fit after self-cal, rms=0.169863Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.173 mas, bmaj=10.52 mas, bpa=17.21 degrees ! Estimated noise=1094.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195452 Jy ! Component: 100 - total flux cleaned = 0.00249602 Jy ! Component: 150 - total flux cleaned = 0.00275994 Jy ! Component: 200 - total flux cleaned = 0.00291258 Jy ! Total flux subtracted in 200 components = 0.00291258 Jy ! Clean residual min=-0.002509 max=0.002212 Jy/beam ! Clean residual mean=-0.000009 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.227069 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 133 components and 0.227069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169814Jy sigma=0.000656 ! Fit after self-cal, rms=0.169840Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436691 Jy ! Component: 100 - total flux cleaned = 0.000573661 Jy ! Component: 150 - total flux cleaned = 0.000604774 Jy ! Component: 200 - total flux cleaned = 0.000575053 Jy ! Total flux subtracted in 200 components = 0.000575053 Jy ! Clean residual min=-0.002530 max=0.002161 Jy/beam ! Clean residual mean=-0.000008 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.227644 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 150 components and 0.227644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169820Jy sigma=0.000656 ! Fit after self-cal, rms=0.169818Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169818Jy sigma=0.000656 ! Fit after self-cal, rms=0.170521Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.831 mas, bmaj=13.12 mas, bpa=10.05 degrees ! Estimated noise=1282.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116208 Jy ! Component: 100 - total flux cleaned = 0.00141752 Jy ! Component: 150 - total flux cleaned = 0.00149127 Jy ! Component: 200 - total flux cleaned = 0.00149141 Jy ! Total flux subtracted in 200 components = 0.00149141 Jy ! Clean residual min=-0.002103 max=0.002279 Jy/beam ! Clean residual mean=-0.000012 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.229136 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 184 components and 0.229136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170514Jy sigma=0.000656 ! Fit after self-cal, rms=0.170513Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137744 Jy ! Component: 100 - total flux cleaned = 0.000117918 Jy ! Component: 150 - total flux cleaned = 0.000101421 Jy ! Component: 200 - total flux cleaned = 5.55123e-05 Jy ! Total flux subtracted in 200 components = 5.55123e-05 Jy ! Clean residual min=-0.002082 max=0.002235 Jy/beam ! Clean residual mean=-0.000012 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.229191 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 207 components and 0.229191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170509Jy sigma=0.000656 ! Fit after self-cal, rms=0.170505Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.171 mas, bmaj=10.51 mas, bpa=17.2 degrees ! Estimated noise=1095.89 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.171 x 10.51 at 17.2 degrees (North through East) ! Clean map min=-0.0023505 max=0.18363 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=9.434 mas, bpa=17.58 degrees ! Estimated noise=1375.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139865 Jy ! Component: 100 - total flux cleaned = 0.177061 Jy ! Component: 150 - total flux cleaned = 0.195179 Jy ! Component: 200 - total flux cleaned = 0.205876 Jy ! Total flux subtracted in 200 components = 0.205876 Jy ! Clean residual min=-0.004565 max=0.005530 Jy/beam ! Clean residual mean=-0.000019 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.205876 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.205876 Jy ! Inverting map and beam ! Estimated beam: bmin=4.171 mas, bmaj=10.51 mas, bpa=17.2 degrees ! Estimated noise=1095.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774883 Jy ! Component: 100 - total flux cleaned = 0.0130595 Jy ! Component: 150 - total flux cleaned = 0.0169652 Jy ! Component: 200 - total flux cleaned = 0.0198976 Jy ! Total flux subtracted in 200 components = 0.0198976 Jy ! Clean residual min=-0.002806 max=0.002714 Jy/beam ! Clean residual mean=-0.000010 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.225773 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 68 components and 0.225773 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.831 mas, bmaj=13.12 mas, bpa=10.05 degrees ! Estimated noise=1282.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287647 Jy ! Component: 100 - total flux cleaned = 0.00371573 Jy ! Component: 150 - total flux cleaned = 0.00391144 Jy ! Component: 200 - total flux cleaned = 0.00411909 Jy ! Total flux subtracted in 200 components = 0.00411909 Jy ! Clean residual min=-0.002353 max=0.002451 Jy/beam ! Clean residual mean=-0.000015 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.229892 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129269 Jy ! Component: 100 - total flux cleaned = 0.000242253 Jy ! Component: 150 - total flux cleaned = 0.000274878 Jy ! Component: 200 - total flux cleaned = 0.000305133 Jy ! Total flux subtracted in 200 components = 0.000305133 Jy ! Clean residual min=-0.002359 max=0.002386 Jy/beam ! Clean residual mean=-0.000013 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.230197 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 144 components and 0.230197 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.171 mas, bmaj=10.51 mas, bpa=17.2 degrees ! Estimated noise=1095.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432401 Jy ! Component: 100 - total flux cleaned = 0.000380497 Jy ! Component: 150 - total flux cleaned = 0.000291329 Jy ! Component: 200 - total flux cleaned = 0.000374498 Jy ! Total flux subtracted in 200 components = 0.000374498 Jy ! Clean residual min=-0.002582 max=0.002264 Jy/beam ! Clean residual mean=-0.000007 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.230572 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 169 components and 0.230572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170568Jy sigma=0.000656 ! Fit after self-cal, rms=0.170536Jy sigma=0.000656 wmodel J0300-0531_S_2017_01_16_pus_map.mod ! Writing 169 model components to file: J0300-0531_S_2017_01_16_pus_map.mod wobs J0300-0531_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0300-0531_S_2017_01_16_pus_uvs.fits wwins J0300-0531_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J0300-0531_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000833971 Jy ! Component: 100 - total flux cleaned = -0.000752357 Jy ! Component: 150 - total flux cleaned = -0.000713449 Jy ! Component: 200 - total flux cleaned = -0.000603705 Jy ! Component: 250 - total flux cleaned = -0.000534205 Jy ! Component: 300 - total flux cleaned = -0.000568226 Jy ! Component: 350 - total flux cleaned = -0.000601144 Jy ! Component: 400 - total flux cleaned = -0.00063344 Jy ! Component: 450 - total flux cleaned = -0.00066389 Jy ! Component: 500 - total flux cleaned = -0.000632088 Jy ! Component: 550 - total flux cleaned = -0.000723319 Jy ! Component: 600 - total flux cleaned = -0.000842959 Jy ! Component: 650 - total flux cleaned = -0.000960095 Jy ! Component: 700 - total flux cleaned = -0.00107573 Jy ! Component: 750 - total flux cleaned = -0.00121756 Jy ! Component: 800 - total flux cleaned = -0.00132954 Jy ! Component: 850 - total flux cleaned = -0.0014124 Jy ! Component: 900 - total flux cleaned = -0.00154844 Jy ! Component: 950 - total flux cleaned = -0.00173589 Jy ! Component: 1000 - total flux cleaned = -0.00176157 Jy ! Component: 1050 - total flux cleaned = -0.00170872 Jy ! Component: 1100 - total flux cleaned = -0.00176073 Jy ! Component: 1150 - total flux cleaned = -0.00181155 Jy ! Component: 1200 - total flux cleaned = -0.00178672 Jy ! Component: 1250 - total flux cleaned = -0.00181167 Jy ! Component: 1300 - total flux cleaned = -0.0017869 Jy ! Component: 1350 - total flux cleaned = -0.00178688 Jy ! Component: 1400 - total flux cleaned = -0.00173793 Jy ! Component: 1450 - total flux cleaned = -0.00166613 Jy ! Component: 1500 - total flux cleaned = -0.00168982 Jy ! Component: 1550 - total flux cleaned = -0.00168995 Jy ! Component: 1600 - total flux cleaned = -0.00176004 Jy ! Component: 1650 - total flux cleaned = -0.00175979 Jy ! Component: 1700 - total flux cleaned = -0.00173678 Jy ! Component: 1750 - total flux cleaned = -0.00169136 Jy ! Component: 1800 - total flux cleaned = -0.00171378 Jy ! Component: 1850 - total flux cleaned = -0.0017584 Jy ! Component: 1900 - total flux cleaned = -0.00180248 Jy ! Component: 1950 - total flux cleaned = -0.00173655 Jy ! Component: 2000 - total flux cleaned = -0.00175836 Jy ! Component: 2050 - total flux cleaned = -0.00182348 Jy ! Component: 2100 - total flux cleaned = -0.00173782 Jy ! Component: 2150 - total flux cleaned = -0.00173777 Jy ! Component: 2200 - total flux cleaned = -0.0018014 Jy ! Component: 2250 - total flux cleaned = -0.00180128 Jy ! Component: 2300 - total flux cleaned = -0.00178035 Jy ! Component: 2350 - total flux cleaned = -0.00180092 Jy ! Component: 2400 - total flux cleaned = -0.00175966 Jy ! Component: 2450 - total flux cleaned = -0.00175964 Jy ! Component: 2500 - total flux cleaned = -0.00171876 Jy ! Component: 2550 - total flux cleaned = -0.00173912 Jy ! Component: 2600 - total flux cleaned = -0.00167905 Jy ! Component: 2650 - total flux cleaned = -0.00175903 Jy ! Component: 2700 - total flux cleaned = -0.00163999 Jy ! Component: 2750 - total flux cleaned = -0.00167951 Jy ! Component: 2800 - total flux cleaned = -0.00164035 Jy ! Component: 2850 - total flux cleaned = -0.00169874 Jy ! Component: 2900 - total flux cleaned = -0.0016987 Jy ! Component: 2950 - total flux cleaned = -0.00169845 Jy ! Component: 3000 - total flux cleaned = -0.00167947 Jy ! Component: 3050 - total flux cleaned = -0.00166056 Jy ! Component: 3100 - total flux cleaned = -0.00166052 Jy ! Component: 3150 - total flux cleaned = -0.00169788 Jy ! Component: 3200 - total flux cleaned = -0.00169782 Jy ! Component: 3250 - total flux cleaned = -0.00167896 Jy ! Component: 3300 - total flux cleaned = -0.00158684 Jy ! Component: 3350 - total flux cleaned = -0.00162361 Jy ! Component: 3400 - total flux cleaned = -0.00156887 Jy ! Component: 3450 - total flux cleaned = -0.00164148 Jy ! Component: 3500 - total flux cleaned = -0.00164127 Jy ! Component: 3550 - total flux cleaned = -0.00160532 Jy ! Component: 3600 - total flux cleaned = -0.00162316 Jy ! Component: 3650 - total flux cleaned = -0.00167654 Jy ! Component: 3700 - total flux cleaned = -0.00165868 Jy ! Component: 3750 - total flux cleaned = -0.00165851 Jy ! Component: 3800 - total flux cleaned = -0.00164101 Jy ! Component: 3850 - total flux cleaned = -0.00162363 Jy ! Component: 3900 - total flux cleaned = -0.00169301 Jy ! Component: 3950 - total flux cleaned = -0.00162397 Jy ! Component: 4000 - total flux cleaned = -0.00169264 Jy ! Component: 4050 - total flux cleaned = -0.00172684 Jy ! Total flux subtracted in 4096 components = -0.00170991 Jy ! Clean residual min=-0.001090 max=0.001037 Jy/beam ! Clean residual mean=-0.000003 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.228862 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 448 components and 0.228862 Jy ![Exited script file: muppet] wmap "J0300-0531_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.171 x 10.51 at 17.2 degrees (North through East) ! Clean map min=-0.0022906 max=0.18323 Jy/beam ! Writing clean map to FITS file: J0300-0531_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.183232 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000325359 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5327 0.5327 1.0654 2.1308 4.2616 8.5232 17.0464 34.0928 68.1856 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.171 x 10.51 at 17.2 degrees (North through East) ! Clean map min=-0.0022906 max=0.18323 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0300-0531_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:02:57 2019