! Started logfile: J0254+2343_S_2017_01_21_pus_uvs.log on Sun May 5 15:44:45 2019 obs J0254+2343_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0254+2343_S_2017_01_21_pus_uva.fits ! AN table 1: 83 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.886546 visibilities/baseline/integration-bin. ! Found source: J0254+2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 10596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0254+2343_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903500Jy sigma=0.007715 ! Fit after self-cal, rms=0.896323Jy sigma=0.007664 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=6.022 mas, bpa=-8.942 degrees ! Estimated noise=1127.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842138 Jy ! Component: 100 - total flux cleaned = 0.102579 Jy ! Total flux subtracted in 100 components = 0.102579 Jy ! Clean residual min=-0.004791 max=0.005196 Jy/beam ! Clean residual mean=-0.000002 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.102579 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.102579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087019Jy sigma=0.000676 ! Fit after self-cal, rms=0.087004Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=6.742 mas, bpa=-6.981 degrees ! Estimated noise=878.969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492382 Jy ! Component: 100 - total flux cleaned = 0.00666179 Jy ! Component: 150 - total flux cleaned = 0.00734762 Jy ! Component: 200 - total flux cleaned = 0.0075013 Jy ! Total flux subtracted in 200 components = 0.0075013 Jy ! Clean residual min=-0.003369 max=0.003344 Jy/beam ! Clean residual mean=0.000012 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.11008 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.11008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086798Jy sigma=0.000674 ! Fit after self-cal, rms=0.086802Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.92 HN 1.00 LA 1.07 ! MK 1.07 NL 0.98 OV 0.99 PT 1.02 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.98 LA 1.03 ! MK 1.01 NL 1.03 OV 1.06 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.01 LA 1.02 ! MK 1.01 NL 1.07 OV 0.95 PT 0.95 ! SC 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 0.91 LA 1.02 ! MK 1.08 NL 1.00* OV 0.93 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.086802Jy sigma=0.000674 ! Fit after self-cal, rms=0.088770Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=6.74 mas, bpa=-6.516 degrees ! Estimated noise=878.204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121929 Jy ! Component: 100 - total flux cleaned = 5.72613e-05 Jy ! Component: 150 - total flux cleaned = 0.000122169 Jy ! Component: 200 - total flux cleaned = 0.000196777 Jy ! Total flux subtracted in 200 components = 0.000196777 Jy ! Clean residual min=-0.002647 max=0.002660 Jy/beam ! Clean residual mean=0.000012 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.110277 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.110277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088757Jy sigma=0.000670 ! Fit after self-cal, rms=0.088884Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088884Jy sigma=0.000670 ! Fit after self-cal, rms=0.105527Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=6.734 mas, bpa=-6.953 degrees ! Estimated noise=880.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612912 Jy ! Component: 100 - total flux cleaned = 0.000723256 Jy ! Component: 150 - total flux cleaned = 0.000737299 Jy ! Component: 200 - total flux cleaned = 0.00072597 Jy ! Total flux subtracted in 200 components = 0.00072597 Jy ! Clean residual min=-0.002397 max=0.002035 Jy/beam ! Clean residual mean=0.000003 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.111003 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.111003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105517Jy sigma=0.000664 ! Fit after self-cal, rms=0.106163Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.81415e-05 Jy ! Component: 100 - total flux cleaned = -9.80019e-05 Jy ! Component: 150 - total flux cleaned = -0.000107533 Jy ! Component: 200 - total flux cleaned = -0.00011666 Jy ! Total flux subtracted in 200 components = -0.00011666 Jy ! Clean residual min=-0.002339 max=0.002018 Jy/beam ! Clean residual mean=0.000004 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.110886 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.110886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106160Jy sigma=0.000663 ! Fit after self-cal, rms=0.106168Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106168Jy sigma=0.000663 ! Fit after self-cal, rms=0.109387Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=6.716 mas, bpa=-7.025 degrees ! Estimated noise=881.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459901 Jy ! Component: 100 - total flux cleaned = 0.000524288 Jy ! Component: 150 - total flux cleaned = 0.000524686 Jy ! Component: 200 - total flux cleaned = 0.00051504 Jy ! Total flux subtracted in 200 components = 0.00051504 Jy ! Clean residual min=-0.002424 max=0.001985 Jy/beam ! Clean residual mean=0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.111401 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.111401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109381Jy sigma=0.000663 ! Fit after self-cal, rms=0.109439Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.3555e-05 Jy ! Component: 100 - total flux cleaned = -5.13759e-05 Jy ! Component: 150 - total flux cleaned = -6.83537e-05 Jy ! Component: 200 - total flux cleaned = -7.62777e-05 Jy ! Total flux subtracted in 200 components = -7.62777e-05 Jy ! Clean residual min=-0.002418 max=0.001966 Jy/beam ! Clean residual mean=0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.111325 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.111325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109436Jy sigma=0.000663 ! Fit after self-cal, rms=0.109440Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109440Jy sigma=0.000663 ! Fit after self-cal, rms=0.109834Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.056 mas, bmaj=9.684 mas, bpa=-3.032 degrees ! Estimated noise=1090.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413393 Jy ! Component: 100 - total flux cleaned = 0.00045893 Jy ! Component: 150 - total flux cleaned = 0.000466007 Jy ! Component: 200 - total flux cleaned = 0.000477779 Jy ! Total flux subtracted in 200 components = 0.000477779 Jy ! Clean residual min=-0.002702 max=0.002375 Jy/beam ! Clean residual mean=0.000008 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.111803 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.111803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109835Jy sigma=0.000663 ! Fit after self-cal, rms=0.109839Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21554e-06 Jy ! Component: 100 - total flux cleaned = -1.1995e-06 Jy ! Component: 150 - total flux cleaned = -1.28368e-06 Jy ! Component: 200 - total flux cleaned = 4.19533e-06 Jy ! Total flux subtracted in 200 components = 4.19533e-06 Jy ! Clean residual min=-0.002704 max=0.002370 Jy/beam ! Clean residual mean=0.000008 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.111807 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.111807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109840Jy sigma=0.000663 ! Fit after self-cal, rms=0.109839Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=6.703 mas, bpa=-7.094 degrees ! Estimated noise=881.718 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 6.703 at -7.094 degrees (North through East) ! Clean map min=-0.0023771 max=0.10836 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=5.99 mas, bpa=-8.981 degrees ! Estimated noise=1131.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0844098 Jy ! Component: 100 - total flux cleaned = 0.102832 Jy ! Component: 150 - total flux cleaned = 0.107767 Jy ! Component: 200 - total flux cleaned = 0.109938 Jy ! Total flux subtracted in 200 components = 0.109938 Jy ! Clean residual min=-0.002797 max=0.002334 Jy/beam ! Clean residual mean=-0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.109938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.109938 Jy ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=6.703 mas, bpa=-7.094 degrees ! Estimated noise=881.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103297 Jy ! Component: 100 - total flux cleaned = 0.00121052 Jy ! Component: 150 - total flux cleaned = 0.00136524 Jy ! Component: 200 - total flux cleaned = 0.00144392 Jy ! Total flux subtracted in 200 components = 0.00144392 Jy ! Clean residual min=-0.002405 max=0.001944 Jy/beam ! Clean residual mean=0.000003 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.111382 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.111382 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.056 mas, bmaj=9.684 mas, bpa=-3.032 degrees ! Estimated noise=1090.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312046 Jy ! Component: 100 - total flux cleaned = 0.000374408 Jy ! Component: 150 - total flux cleaned = 0.000373994 Jy ! Component: 200 - total flux cleaned = 0.000381242 Jy ! Total flux subtracted in 200 components = 0.000381242 Jy ! Clean residual min=-0.002699 max=0.002381 Jy/beam ! Clean residual mean=0.000008 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.111763 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.34876e-08 Jy ! Component: 100 - total flux cleaned = 3.18939e-08 Jy ! Component: 150 - total flux cleaned = 6.28631e-06 Jy ! Component: 200 - total flux cleaned = 1.23874e-05 Jy ! Total flux subtracted in 200 components = 1.23874e-05 Jy ! Clean residual min=-0.002693 max=0.002374 Jy/beam ! Clean residual mean=0.000008 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.111775 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.111775 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=6.703 mas, bpa=-7.094 degrees ! Estimated noise=881.718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162551 Jy ! Component: 100 - total flux cleaned = -0.000147695 Jy ! Component: 150 - total flux cleaned = -0.000120462 Jy ! Component: 200 - total flux cleaned = -0.000108674 Jy ! Total flux subtracted in 200 components = -0.000108674 Jy ! Clean residual min=-0.002395 max=0.001970 Jy/beam ! Clean residual mean=0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.111667 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.111667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109839Jy sigma=0.000663 ! Fit after self-cal, rms=0.109834Jy sigma=0.000663 wmodel J0254+2343_S_2017_01_21_pus_map.mod ! Writing 47 model components to file: J0254+2343_S_2017_01_21_pus_map.mod wobs J0254+2343_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0254+2343_S_2017_01_21_pus_uvs.fits wwins J0254+2343_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0254+2343_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700904 Jy ! Component: 100 - total flux cleaned = -0.00104847 Jy ! Component: 150 - total flux cleaned = -0.00127785 Jy ! Component: 200 - total flux cleaned = -0.00134155 Jy ! Component: 250 - total flux cleaned = -0.00146519 Jy ! Component: 300 - total flux cleaned = -0.0015544 Jy ! Component: 350 - total flux cleaned = -0.00158387 Jy ! Component: 400 - total flux cleaned = -0.00166856 Jy ! Component: 450 - total flux cleaned = -0.00172297 Jy ! Component: 500 - total flux cleaned = -0.00169554 Jy ! Component: 550 - total flux cleaned = -0.00169589 Jy ! Component: 600 - total flux cleaned = -0.00177357 Jy ! Component: 650 - total flux cleaned = -0.00177306 Jy ! Component: 700 - total flux cleaned = -0.00187361 Jy ! Component: 750 - total flux cleaned = -0.00194791 Jy ! Component: 800 - total flux cleaned = -0.00211888 Jy ! Component: 850 - total flux cleaned = -0.00223903 Jy ! Component: 900 - total flux cleaned = -0.00235785 Jy ! Component: 950 - total flux cleaned = -0.00247538 Jy ! Component: 1000 - total flux cleaned = -0.00256775 Jy ! Component: 1050 - total flux cleaned = -0.00268213 Jy ! Component: 1100 - total flux cleaned = -0.00288489 Jy ! Component: 1150 - total flux cleaned = -0.00299624 Jy ! Component: 1200 - total flux cleaned = -0.00317197 Jy ! Component: 1250 - total flux cleaned = -0.00328067 Jy ! Component: 1300 - total flux cleaned = -0.00340968 Jy ! Component: 1350 - total flux cleaned = -0.00351618 Jy ! Component: 1400 - total flux cleaned = -0.00360045 Jy ! Component: 1450 - total flux cleaned = -0.00370482 Jy ! Component: 1500 - total flux cleaned = -0.00378779 Jy ! Component: 1550 - total flux cleaned = -0.00386966 Jy ! Component: 1600 - total flux cleaned = -0.00401167 Jy ! Component: 1650 - total flux cleaned = -0.0040514 Jy ! Component: 1700 - total flux cleaned = -0.00411087 Jy ! Component: 1750 - total flux cleaned = -0.00415037 Jy ! Component: 1800 - total flux cleaned = -0.0041897 Jy ! Component: 1850 - total flux cleaned = -0.00424764 Jy ! Component: 1900 - total flux cleaned = -0.00432433 Jy ! Component: 1950 - total flux cleaned = -0.00430542 Jy ! Component: 2000 - total flux cleaned = -0.00443738 Jy ! Component: 2050 - total flux cleaned = -0.00447465 Jy ! Component: 2100 - total flux cleaned = -0.00453026 Jy ! Component: 2150 - total flux cleaned = -0.00464003 Jy ! Component: 2200 - total flux cleaned = -0.00467634 Jy ! Component: 2250 - total flux cleaned = -0.00474834 Jy ! Component: 2300 - total flux cleaned = -0.00478408 Jy ! Component: 2350 - total flux cleaned = -0.00481973 Jy ! Component: 2400 - total flux cleaned = -0.00489003 Jy ! Component: 2450 - total flux cleaned = -0.00502929 Jy ! Component: 2500 - total flux cleaned = -0.00511551 Jy ! Component: 2550 - total flux cleaned = -0.00518401 Jy ! Component: 2600 - total flux cleaned = -0.00526898 Jy ! Component: 2650 - total flux cleaned = -0.0053365 Jy ! Component: 2700 - total flux cleaned = -0.0053866 Jy ! Component: 2750 - total flux cleaned = -0.00548629 Jy ! Component: 2800 - total flux cleaned = -0.00551942 Jy ! Component: 2850 - total flux cleaned = -0.00565061 Jy ! Component: 2900 - total flux cleaned = -0.00571577 Jy ! Component: 2950 - total flux cleaned = -0.00579662 Jy ! Component: 3000 - total flux cleaned = -0.00589305 Jy ! Component: 3050 - total flux cleaned = -0.00597279 Jy ! Component: 3100 - total flux cleaned = -0.00608366 Jy ! Component: 3150 - total flux cleaned = -0.00614674 Jy ! Component: 3200 - total flux cleaned = -0.00624064 Jy ! Component: 3250 - total flux cleaned = -0.00630283 Jy ! Component: 3300 - total flux cleaned = -0.00636458 Jy ! Component: 3350 - total flux cleaned = -0.00650245 Jy ! Component: 3400 - total flux cleaned = -0.00651774 Jy ! Component: 3450 - total flux cleaned = -0.00665377 Jy ! Component: 3500 - total flux cleaned = -0.00674387 Jy ! Component: 3550 - total flux cleaned = -0.00678862 Jy ! Component: 3600 - total flux cleaned = -0.00678873 Jy ! Component: 3650 - total flux cleaned = -0.00696584 Jy ! Component: 3700 - total flux cleaned = -0.00700996 Jy ! Component: 3750 - total flux cleaned = -0.00709734 Jy ! Component: 3800 - total flux cleaned = -0.00716981 Jy ! Component: 3850 - total flux cleaned = -0.00719873 Jy ! Component: 3900 - total flux cleaned = -0.00727027 Jy ! Component: 3950 - total flux cleaned = -0.0073414 Jy ! Component: 4000 - total flux cleaned = -0.00739819 Jy ! Component: 4050 - total flux cleaned = -0.00748264 Jy ! Total flux subtracted in 4096 components = -0.00751063 Jy ! Clean residual min=-0.000903 max=0.000849 Jy/beam ! Clean residual mean=-0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.104156 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 324 components and 0.104156 Jy ![Exited script file: muppet] wmap "J0254+2343_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 6.703 at -7.094 degrees (North through East) ! Clean map min=-0.0017336 max=0.10826 Jy/beam ! Writing clean map to FITS file: J0254+2343_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255118 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.706952 0.706952 1.4139 2.82781 5.65561 11.3112 22.6225 45.2449 90.4898 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 6.703 at -7.094 degrees (North through East) ! Clean map min=-0.0017336 max=0.10826 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0254+2343_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:44:49 2019