! Started logfile: J0253-1200_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:07 2019 obs J0253-1200_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0253-1200_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.572031 visibilities/baseline/integration-bin. ! Found source: J0253-1200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0253-1200_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 504 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 435 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1026 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968452Jy sigma=0.008363 ! Fit after self-cal, rms=0.941551Jy sigma=0.008145 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=18.01 mas, bpa=-13.01 degrees ! Estimated noise=1371.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464975 Jy ! Component: 100 - total flux cleaned = 0.0578674 Jy ! Total flux subtracted in 100 components = 0.0578674 Jy ! Clean residual min=-0.003797 max=0.005446 Jy/beam ! Clean residual mean=-0.000002 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.0578674 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0578674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080310Jy sigma=0.000637 ! Fit after self-cal, rms=0.080031Jy sigma=0.000634 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=21.23 mas, bpa=-13.61 degrees ! Estimated noise=969.657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515877 Jy ! Component: 100 - total flux cleaned = 0.00731788 Jy ! Component: 150 - total flux cleaned = 0.00832256 Jy ! Component: 200 - total flux cleaned = 0.00856799 Jy ! Total flux subtracted in 200 components = 0.00856799 Jy ! Clean residual min=-0.003675 max=0.003350 Jy/beam ! Clean residual mean=-0.000003 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.0664354 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.0664354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079678Jy sigma=0.000632 ! Fit after self-cal, rms=0.079612Jy sigma=0.000632 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00 HN 1.04 KP 0.99 ! LA 1.00 MK 1.04 NL 0.98 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.04 KP 0.91 ! LA 0.94 MK 1.03 NL 1.11 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.10 HN 0.99 KP 0.89 ! LA 0.78 MK 1.07 NL 1.13 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.87 KP 1.00* ! LA 1.00* MK 0.99 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.079612Jy sigma=0.000632 ! Fit after self-cal, rms=0.076151Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=20.72 mas, bpa=-13.49 degrees ! Estimated noise=965.902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032199 Jy ! Component: 100 - total flux cleaned = -0.00050625 Jy ! Component: 150 - total flux cleaned = -0.00055864 Jy ! Component: 200 - total flux cleaned = -0.000626157 Jy ! Total flux subtracted in 200 components = -0.000626157 Jy ! Clean residual min=-0.001943 max=0.002492 Jy/beam ! Clean residual mean=0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0658092 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.0658092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076127Jy sigma=0.000630 ! Fit after self-cal, rms=0.075990Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075990Jy sigma=0.000629 ! Fit after self-cal, rms=0.076138Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=20.58 mas, bpa=-13.49 degrees ! Estimated noise=962.699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458096 Jy ! Component: 100 - total flux cleaned = 0.000480237 Jy ! Component: 150 - total flux cleaned = 0.000500903 Jy ! Component: 200 - total flux cleaned = 0.000443668 Jy ! Total flux subtracted in 200 components = 0.000443668 Jy ! Clean residual min=-0.001708 max=0.002223 Jy/beam ! Clean residual mean=-0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0662529 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.0662529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076124Jy sigma=0.000628 ! Fit after self-cal, rms=0.076170Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-54, -102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130779 Jy ! Component: 100 - total flux cleaned = 0.00156983 Jy ! Component: 150 - total flux cleaned = 0.0012847 Jy ! Component: 200 - total flux cleaned = 0.00103717 Jy ! Total flux subtracted in 200 components = 0.00103717 Jy ! Clean residual min=-0.001565 max=0.001664 Jy/beam ! Clean residual mean=-0.000002 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.06729 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.06729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076100Jy sigma=0.000627 ! Fit after self-cal, rms=0.076084Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076084Jy sigma=0.000627 ! Fit after self-cal, rms=0.075908Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=20.46 mas, bpa=-13.51 degrees ! Estimated noise=957.674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703944 Jy ! Component: 100 - total flux cleaned = 0.000531096 Jy ! Component: 150 - total flux cleaned = 0.00044225 Jy ! Component: 200 - total flux cleaned = 0.000359309 Jy ! Total flux subtracted in 200 components = 0.000359309 Jy ! Clean residual min=-0.001380 max=0.001588 Jy/beam ! Clean residual mean=-0.000003 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0676493 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.0676493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075874Jy sigma=0.000627 ! Fit after self-cal, rms=0.075887Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135867 Jy ! Component: 100 - total flux cleaned = 5.45519e-05 Jy ! Component: 150 - total flux cleaned = -9.38536e-05 Jy ! Component: 200 - total flux cleaned = -0.000208664 Jy ! Total flux subtracted in 200 components = -0.000208664 Jy ! Clean residual min=-0.001383 max=0.001505 Jy/beam ! Clean residual mean=-0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0674407 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 0.0674407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075869Jy sigma=0.000626 ! Fit after self-cal, rms=0.075863Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075863Jy sigma=0.000626 ! Fit after self-cal, rms=0.075770Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.797 mas, bmaj=20.74 mas, bpa=-9.71 degrees ! Estimated noise=1153.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020159 Jy ! Component: 100 - total flux cleaned = -0.000202115 Jy ! Component: 150 - total flux cleaned = -0.000159635 Jy ! Component: 200 - total flux cleaned = -0.000177283 Jy ! Total flux subtracted in 200 components = -0.000177283 Jy ! Clean residual min=-0.001448 max=0.001384 Jy/beam ! Clean residual mean=-0.000004 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0672634 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 0.0672634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075762Jy sigma=0.000626 ! Fit after self-cal, rms=0.075763Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213686 Jy ! Component: 100 - total flux cleaned = -0.000213832 Jy ! Component: 150 - total flux cleaned = -0.000246952 Jy ! Component: 200 - total flux cleaned = -0.000262268 Jy ! Total flux subtracted in 200 components = -0.000262268 Jy ! Clean residual min=-0.001457 max=0.001395 Jy/beam ! Clean residual mean=-0.000004 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0670011 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 0.0670012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075758Jy sigma=0.000626 ! Fit after self-cal, rms=0.075748Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=20.43 mas, bpa=-13.53 degrees ! Estimated noise=954.231 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.299 x 20.43 at -13.53 degrees (North through East) ! Clean map min=-0.0021893 max=0.060285 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=17.22 mas, bpa=-12.85 degrees ! Estimated noise=1337.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450732 Jy ! Component: 100 - total flux cleaned = 0.0559896 Jy ! Component: 150 - total flux cleaned = 0.0614116 Jy ! Component: 200 - total flux cleaned = 0.0637257 Jy ! Total flux subtracted in 200 components = 0.0637257 Jy ! Clean residual min=-0.003242 max=0.002815 Jy/beam ! Clean residual mean=-0.000001 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.0637257 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0637257 Jy ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=20.43 mas, bpa=-13.53 degrees ! Estimated noise=954.231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207566 Jy ! Component: 100 - total flux cleaned = 0.00342277 Jy ! Component: 150 - total flux cleaned = 0.00383226 Jy ! Component: 200 - total flux cleaned = 0.00383261 Jy ! Total flux subtracted in 200 components = 0.00383261 Jy ! Clean residual min=-0.001749 max=0.002006 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0675583 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 59 components and 0.0675583 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.797 mas, bmaj=20.74 mas, bpa=-9.71 degrees ! Estimated noise=1153.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000445173 Jy ! Component: 100 - total flux cleaned = -0.000496316 Jy ! Component: 150 - total flux cleaned = -0.000459814 Jy ! Component: 200 - total flux cleaned = -0.00051823 Jy ! Total flux subtracted in 200 components = -0.00051823 Jy ! Clean residual min=-0.001531 max=0.001464 Jy/beam ! Clean residual mean=-0.000005 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0670401 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.89312e-05 Jy ! Component: 100 - total flux cleaned = -0.000102214 Jy ! Component: 150 - total flux cleaned = -0.000146889 Jy ! Component: 200 - total flux cleaned = -0.000167544 Jy ! Total flux subtracted in 200 components = -0.000167544 Jy ! Clean residual min=-0.001513 max=0.001410 Jy/beam ! Clean residual mean=-0.000004 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0668725 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 110 components and 0.0668725 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=20.43 mas, bpa=-13.53 degrees ! Estimated noise=954.231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.21225e-06 Jy ! Component: 100 - total flux cleaned = 2.82592e-05 Jy ! Component: 150 - total flux cleaned = -8.43873e-07 Jy ! Component: 200 - total flux cleaned = -5.52691e-05 Jy ! Total flux subtracted in 200 components = -5.52691e-05 Jy ! Clean residual min=-0.001441 max=0.001509 Jy/beam ! Clean residual mean=-0.000002 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0668172 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 131 components and 0.0668172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075762Jy sigma=0.000626 ! Fit after self-cal, rms=0.075760Jy sigma=0.000626 wmodel J0253-1200_S_2017_10_09_pus_map.mod ! Writing 131 model components to file: J0253-1200_S_2017_10_09_pus_map.mod wobs J0253-1200_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0253-1200_S_2017_10_09_pus_uvs.fits wwins J0253-1200_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0253-1200_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169977 Jy ! Component: 100 - total flux cleaned = 0.000146305 Jy ! Component: 150 - total flux cleaned = 0.000168934 Jy ! Component: 200 - total flux cleaned = 0.000105681 Jy ! Component: 250 - total flux cleaned = 4.50582e-05 Jy ! Component: 300 - total flux cleaned = -1.26047e-05 Jy ! Component: 350 - total flux cleaned = -4.976e-05 Jy ! Component: 400 - total flux cleaned = -8.60453e-05 Jy ! Component: 450 - total flux cleaned = -0.000121148 Jy ! Component: 500 - total flux cleaned = -0.000171706 Jy ! Component: 550 - total flux cleaned = -0.000203997 Jy ! Component: 600 - total flux cleaned = -0.000187517 Jy ! Component: 650 - total flux cleaned = -0.000171839 Jy ! Component: 700 - total flux cleaned = -0.000201813 Jy ! Component: 750 - total flux cleaned = -0.000260615 Jy ! Component: 800 - total flux cleaned = -0.000274621 Jy ! Component: 850 - total flux cleaned = -0.000274517 Jy ! Component: 900 - total flux cleaned = -0.000288122 Jy ! Component: 950 - total flux cleaned = -0.000274678 Jy ! Component: 1000 - total flux cleaned = -0.000301008 Jy ! Component: 1050 - total flux cleaned = -0.000339241 Jy ! Component: 1100 - total flux cleaned = -0.00035127 Jy ! Component: 1150 - total flux cleaned = -0.000327057 Jy ! Component: 1200 - total flux cleaned = -0.000327144 Jy ! Component: 1250 - total flux cleaned = -0.000315319 Jy ! Component: 1300 - total flux cleaned = -0.000292177 Jy ! Component: 1350 - total flux cleaned = -0.000291882 Jy ! Component: 1400 - total flux cleaned = -0.000269576 Jy ! Component: 1450 - total flux cleaned = -0.000258635 Jy ! Component: 1500 - total flux cleaned = -0.000247828 Jy ! Component: 1550 - total flux cleaned = -0.000258305 Jy ! Component: 1600 - total flux cleaned = -0.000237302 Jy ! Component: 1650 - total flux cleaned = -0.000237007 Jy ! Component: 1700 - total flux cleaned = -0.000226743 Jy ! Component: 1750 - total flux cleaned = -0.000196887 Jy ! Component: 1800 - total flux cleaned = -0.000206896 Jy ! Component: 1850 - total flux cleaned = -0.000187596 Jy ! Component: 1900 - total flux cleaned = -0.00017814 Jy ! Component: 1950 - total flux cleaned = -0.000197192 Jy ! Component: 2000 - total flux cleaned = -0.000215651 Jy ! Component: 2050 - total flux cleaned = -0.000215679 Jy ! Component: 2100 - total flux cleaned = -0.00020676 Jy ! Component: 2150 - total flux cleaned = -0.000198043 Jy ! Component: 2200 - total flux cleaned = -0.000189144 Jy ! Component: 2250 - total flux cleaned = -0.000145666 Jy ! Component: 2300 - total flux cleaned = -0.000137027 Jy ! Component: 2350 - total flux cleaned = -0.000103169 Jy ! Component: 2400 - total flux cleaned = -4.47189e-05 Jy ! Component: 2450 - total flux cleaned = -1.98278e-05 Jy ! Component: 2500 - total flux cleaned = 4.56357e-05 Jy ! Component: 2550 - total flux cleaned = 6.98108e-05 Jy ! Component: 2600 - total flux cleaned = 0.000101685 Jy ! Component: 2650 - total flux cleaned = 0.000109546 Jy ! Component: 2700 - total flux cleaned = 0.000172207 Jy ! Component: 2750 - total flux cleaned = 0.000210973 Jy ! Component: 2800 - total flux cleaned = 0.00024931 Jy ! Component: 2850 - total flux cleaned = 0.000294871 Jy ! Component: 2900 - total flux cleaned = 0.000332496 Jy ! Component: 2950 - total flux cleaned = 0.000377209 Jy ! Component: 3000 - total flux cleaned = 0.000428771 Jy ! Component: 3050 - total flux cleaned = 0.000457898 Jy ! Component: 3100 - total flux cleaned = 0.000501368 Jy ! Component: 3150 - total flux cleaned = 0.000544451 Jy ! Component: 3200 - total flux cleaned = 0.000601477 Jy ! Component: 3250 - total flux cleaned = 0.000608613 Jy ! Component: 3300 - total flux cleaned = 0.000671896 Jy ! Component: 3350 - total flux cleaned = 0.000713798 Jy ! Component: 3400 - total flux cleaned = 0.000769392 Jy ! Component: 3450 - total flux cleaned = 0.00081786 Jy ! Component: 3500 - total flux cleaned = 0.000886827 Jy ! Component: 3550 - total flux cleaned = 0.000948633 Jy ! Component: 3600 - total flux cleaned = 0.000982877 Jy ! Component: 3650 - total flux cleaned = 0.00102384 Jy ! Component: 3700 - total flux cleaned = 0.00105786 Jy ! Component: 3750 - total flux cleaned = 0.00109861 Jy ! Component: 3800 - total flux cleaned = 0.00114602 Jy ! Component: 3850 - total flux cleaned = 0.00117981 Jy ! Component: 3900 - total flux cleaned = 0.00123379 Jy ! Component: 3950 - total flux cleaned = 0.00126071 Jy ! Component: 4000 - total flux cleaned = 0.00130775 Jy ! Component: 4050 - total flux cleaned = 0.0013346 Jy ! Total flux subtracted in 4096 components = 0.0013681 Jy ! Clean residual min=-0.000435 max=0.000409 Jy/beam ! Clean residual mean=-0.000001 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.0681853 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 385 components and 0.0681853 Jy ![Exited script file: muppet] wmap "J0253-1200_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.299 x 20.43 at -13.53 degrees (North through East) ! Clean map min=-0.0020702 max=0.059605 Jy/beam ! Writing clean map to FITS file: J0253-1200_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0596051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000123888 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.623546 0.623546 1.24709 2.49419 4.98837 9.97674 19.9535 39.907 79.8139 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.299 x 20.43 at -13.53 degrees (North through East) ! Clean map min=-0.0020702 max=0.059605 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0253-1200_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:12 2019