! Started logfile: J0253-1200_S_2017_07_16_pus_uvs.log on Thu May 9 10:59:51 2019 obs J0253-1200_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0253-1200_S_2017_07_16_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.501053 visibilities/baseline/integration-bin. ! Found source: J0253-1200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 8568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0253-1200_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 743 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981616Jy sigma=0.008103 ! Fit after self-cal, rms=0.947868Jy sigma=0.007836 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=6.811 mas, bpa=-6.201 degrees ! Estimated noise=1370.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422087 Jy ! Component: 100 - total flux cleaned = 0.0522314 Jy ! Total flux subtracted in 100 components = 0.0522314 Jy ! Clean residual min=-0.004216 max=0.004731 Jy/beam ! Clean residual mean=-0.000003 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.0522314 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0522314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080683Jy sigma=0.000643 ! Fit after self-cal, rms=0.080029Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.681 mas, bmaj=7.413 mas, bpa=-4.585 degrees ! Estimated noise=1069.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560162 Jy ! Component: 100 - total flux cleaned = 0.00850438 Jy ! Component: 150 - total flux cleaned = 0.0102508 Jy ! Component: 200 - total flux cleaned = 0.0111704 Jy ! Total flux subtracted in 200 components = 0.0111704 Jy ! Clean residual min=-0.002755 max=0.002589 Jy/beam ! Clean residual mean=0.000000 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0634019 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.0634019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079630Jy sigma=0.000634 ! Fit after self-cal, rms=0.079656Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 1.06 ! LA 1.06 MK 0.98 NL 0.90 OV 1.03 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 0.94 ! LA 1.01 MK 1.01 NL 1.04 OV 1.06 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 0.95 ! LA 0.96 MK 1.09 NL 1.06 OV 0.97 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.079656Jy sigma=0.000634 ! Fit after self-cal, rms=0.081153Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.746 mas, bmaj=7.451 mas, bpa=-3.525 degrees ! Estimated noise=1089.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.76199e-05 Jy ! Component: 100 - total flux cleaned = 0.000136264 Jy ! Component: 150 - total flux cleaned = 0.000205334 Jy ! Component: 200 - total flux cleaned = 0.00023808 Jy ! Total flux subtracted in 200 components = 0.00023808 Jy ! Clean residual min=-0.002433 max=0.002766 Jy/beam ! Clean residual mean=0.000003 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.06364 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.06364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081121Jy sigma=0.000638 ! Fit after self-cal, rms=0.081172Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081172Jy sigma=0.000637 ! Fit after self-cal, rms=0.081559Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.41 mas, bpa=-3.722 degrees ! Estimated noise=1088.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.71099e-05 Jy ! Component: 100 - total flux cleaned = 0.000177541 Jy ! Component: 150 - total flux cleaned = 0.000198859 Jy ! Component: 200 - total flux cleaned = 0.000217598 Jy ! Total flux subtracted in 200 components = 0.000217598 Jy ! Clean residual min=-0.002446 max=0.002227 Jy/beam ! Clean residual mean=0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0638576 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0638576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081544Jy sigma=0.000636 ! Fit after self-cal, rms=0.081568Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232606 Jy ! Component: 100 - total flux cleaned = 0.000294293 Jy ! Component: 150 - total flux cleaned = 0.000329367 Jy ! Component: 200 - total flux cleaned = 0.000345646 Jy ! Total flux subtracted in 200 components = 0.000345646 Jy ! Clean residual min=-0.002394 max=0.002336 Jy/beam ! Clean residual mean=0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0642032 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 0.0642032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081558Jy sigma=0.000636 ! Fit after self-cal, rms=0.081560Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081560Jy sigma=0.000636 ! Fit after self-cal, rms=0.082172Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.38 mas, bpa=-3.658 degrees ! Estimated noise=1093.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215134 Jy ! Component: 100 - total flux cleaned = 0.00035699 Jy ! Component: 150 - total flux cleaned = 0.000442314 Jy ! Component: 200 - total flux cleaned = 0.00045779 Jy ! Total flux subtracted in 200 components = 0.00045779 Jy ! Clean residual min=-0.002403 max=0.002290 Jy/beam ! Clean residual mean=0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.064661 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.064661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082162Jy sigma=0.000636 ! Fit after self-cal, rms=0.082193Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.55178e-06 Jy ! Component: 100 - total flux cleaned = 4.20881e-05 Jy ! Component: 150 - total flux cleaned = 7.16564e-05 Jy ! Component: 200 - total flux cleaned = 8.56009e-05 Jy ! Total flux subtracted in 200 components = 8.56009e-05 Jy ! Clean residual min=-0.002389 max=0.002326 Jy/beam ! Clean residual mean=0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0647466 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0647466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082186Jy sigma=0.000636 ! Fit after self-cal, rms=0.082193Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082193Jy sigma=0.000636 ! Fit after self-cal, rms=0.082446Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.714 mas, bmaj=15.16 mas, bpa=-4.862 degrees ! Estimated noise=1491.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256296 Jy ! Component: 100 - total flux cleaned = 0.000276431 Jy ! Component: 150 - total flux cleaned = 0.000259367 Jy ! Component: 200 - total flux cleaned = 0.00024459 Jy ! Total flux subtracted in 200 components = 0.00024459 Jy ! Clean residual min=-0.001771 max=0.001750 Jy/beam ! Clean residual mean=0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0649912 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.0649912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082445Jy sigma=0.000636 ! Fit after self-cal, rms=0.082457Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.57902e-05 Jy ! Component: 100 - total flux cleaned = -8.98375e-05 Jy ! Component: 150 - total flux cleaned = -8.97836e-05 Jy ! Component: 200 - total flux cleaned = -0.000101875 Jy ! Total flux subtracted in 200 components = -0.000101875 Jy ! Clean residual min=-0.001787 max=0.001730 Jy/beam ! Clean residual mean=0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0648893 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.0648893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082460Jy sigma=0.000636 ! Fit after self-cal, rms=0.082463Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.362 mas, bpa=-3.58 degrees ! Estimated noise=1095.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.759 x 7.362 at -3.58 degrees (North through East) ! Clean map min=-0.0023053 max=0.052464 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=6.727 mas, bpa=-4.802 degrees ! Estimated noise=1400.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423523 Jy ! Component: 100 - total flux cleaned = 0.0528633 Jy ! Component: 150 - total flux cleaned = 0.0584559 Jy ! Component: 200 - total flux cleaned = 0.0605442 Jy ! Total flux subtracted in 200 components = 0.0605442 Jy ! Clean residual min=-0.003663 max=0.003373 Jy/beam ! Clean residual mean=-0.000001 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.0605442 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0605442 Jy ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.362 mas, bpa=-3.58 degrees ! Estimated noise=1095.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252424 Jy ! Component: 100 - total flux cleaned = 0.00304611 Jy ! Component: 150 - total flux cleaned = 0.00336467 Jy ! Component: 200 - total flux cleaned = 0.00367156 Jy ! Total flux subtracted in 200 components = 0.00367156 Jy ! Clean residual min=-0.002625 max=0.002225 Jy/beam ! Clean residual mean=0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0642158 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 0.0642158 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.714 mas, bmaj=15.16 mas, bpa=-4.862 degrees ! Estimated noise=1491.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522553 Jy ! Component: 100 - total flux cleaned = 0.000546426 Jy ! Component: 150 - total flux cleaned = 0.000582348 Jy ! Component: 200 - total flux cleaned = 0.000582261 Jy ! Total flux subtracted in 200 components = 0.000582261 Jy ! Clean residual min=-0.001804 max=0.001722 Jy/beam ! Clean residual mean=0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.064798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.36395e-05 Jy ! Component: 100 - total flux cleaned = -2.65678e-05 Jy ! Component: 150 - total flux cleaned = -2.59178e-05 Jy ! Component: 200 - total flux cleaned = -3.62431e-05 Jy ! Total flux subtracted in 200 components = -3.62431e-05 Jy ! Clean residual min=-0.001796 max=0.001717 Jy/beam ! Clean residual mean=0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0647618 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0647618 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.362 mas, bpa=-3.58 degrees ! Estimated noise=1095.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.23071e-05 Jy ! Component: 100 - total flux cleaned = 0.000208419 Jy ! Component: 150 - total flux cleaned = 0.000234863 Jy ! Component: 200 - total flux cleaned = 0.000234076 Jy ! Total flux subtracted in 200 components = 0.000234076 Jy ! Clean residual min=-0.002408 max=0.002281 Jy/beam ! Clean residual mean=0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0649959 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.0649959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082453Jy sigma=0.000636 ! Fit after self-cal, rms=0.082453Jy sigma=0.000636 wmodel J0253-1200_S_2017_07_16_pus_map.mod ! Writing 39 model components to file: J0253-1200_S_2017_07_16_pus_map.mod wobs J0253-1200_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0253-1200_S_2017_07_16_pus_uvs.fits wwins J0253-1200_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0253-1200_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00057273 Jy ! Component: 100 - total flux cleaned = -0.00046119 Jy ! Component: 150 - total flux cleaned = -0.000392696 Jy ! Component: 200 - total flux cleaned = -0.000393353 Jy ! Component: 250 - total flux cleaned = -0.00029868 Jy ! Component: 300 - total flux cleaned = -0.000117554 Jy ! Component: 350 - total flux cleaned = 2.77687e-05 Jy ! Component: 400 - total flux cleaned = 0.000140449 Jy ! Component: 450 - total flux cleaned = 0.000303889 Jy ! Component: 500 - total flux cleaned = 0.000382675 Jy ! Component: 550 - total flux cleaned = 0.000434371 Jy ! Component: 600 - total flux cleaned = 0.000509472 Jy ! Component: 650 - total flux cleaned = 0.000534362 Jy ! Component: 700 - total flux cleaned = 0.000534848 Jy ! Component: 750 - total flux cleaned = 0.000534912 Jy ! Component: 800 - total flux cleaned = 0.000399335 Jy ! Component: 850 - total flux cleaned = 0.000333286 Jy ! Component: 900 - total flux cleaned = 0.000333407 Jy ! Component: 950 - total flux cleaned = 0.00024842 Jy ! Component: 1000 - total flux cleaned = 0.000185739 Jy ! Component: 1050 - total flux cleaned = 0.0001039 Jy ! Component: 1100 - total flux cleaned = 6.41455e-05 Jy ! Component: 1150 - total flux cleaned = 2.53555e-05 Jy ! Component: 1200 - total flux cleaned = 4.43368e-05 Jy ! Component: 1250 - total flux cleaned = -3.19318e-05 Jy ! Component: 1300 - total flux cleaned = -6.91736e-05 Jy ! Component: 1350 - total flux cleaned = -0.000124329 Jy ! Component: 1400 - total flux cleaned = -0.000160712 Jy ! Component: 1450 - total flux cleaned = -0.000250043 Jy ! Component: 1500 - total flux cleaned = -0.000320504 Jy ! Component: 1550 - total flux cleaned = -0.000303366 Jy ! Component: 1600 - total flux cleaned = -0.000337634 Jy ! Component: 1650 - total flux cleaned = -0.000337917 Jy ! Component: 1700 - total flux cleaned = -0.00035481 Jy ! Component: 1750 - total flux cleaned = -0.000338755 Jy ! Component: 1800 - total flux cleaned = -0.000387648 Jy ! Component: 1850 - total flux cleaned = -0.000419443 Jy ! Component: 1900 - total flux cleaned = -0.0004035 Jy ! Component: 1950 - total flux cleaned = -0.000372217 Jy ! Component: 2000 - total flux cleaned = -0.000341141 Jy ! Component: 2050 - total flux cleaned = -0.000356461 Jy ! Component: 2100 - total flux cleaned = -0.000386435 Jy ! Component: 2150 - total flux cleaned = -0.000401092 Jy ! Component: 2200 - total flux cleaned = -0.000386305 Jy ! Component: 2250 - total flux cleaned = -0.000415362 Jy ! Component: 2300 - total flux cleaned = -0.000458356 Jy ! Component: 2350 - total flux cleaned = -0.000472706 Jy ! Component: 2400 - total flux cleaned = -0.000514924 Jy ! Component: 2450 - total flux cleaned = -0.000515057 Jy ! Component: 2500 - total flux cleaned = -0.000528891 Jy ! Component: 2550 - total flux cleaned = -0.000528798 Jy ! Component: 2600 - total flux cleaned = -0.000556032 Jy ! Component: 2650 - total flux cleaned = -0.000515747 Jy ! Component: 2700 - total flux cleaned = -0.000555879 Jy ! Component: 2750 - total flux cleaned = -0.000542732 Jy ! Component: 2800 - total flux cleaned = -0.00055575 Jy ! Component: 2850 - total flux cleaned = -0.000581817 Jy ! Component: 2900 - total flux cleaned = -0.000594598 Jy ! Component: 2950 - total flux cleaned = -0.000594569 Jy ! Component: 3000 - total flux cleaned = -0.000594459 Jy ! Component: 3050 - total flux cleaned = -0.000619758 Jy ! Component: 3100 - total flux cleaned = -0.000644727 Jy ! Component: 3150 - total flux cleaned = -0.000706962 Jy ! Component: 3200 - total flux cleaned = -0.000669878 Jy ! Component: 3250 - total flux cleaned = -0.000743766 Jy ! Component: 3300 - total flux cleaned = -0.0007806 Jy ! Component: 3350 - total flux cleaned = -0.000829295 Jy ! Component: 3400 - total flux cleaned = -0.000901939 Jy ! Component: 3450 - total flux cleaned = -0.000950021 Jy ! Component: 3500 - total flux cleaned = -0.000998038 Jy ! Component: 3550 - total flux cleaned = -0.00106964 Jy ! Component: 3600 - total flux cleaned = -0.00114099 Jy ! Component: 3650 - total flux cleaned = -0.00117658 Jy ! Component: 3700 - total flux cleaned = -0.00120017 Jy ! Component: 3750 - total flux cleaned = -0.00124724 Jy ! Component: 3800 - total flux cleaned = -0.00127063 Jy ! Component: 3850 - total flux cleaned = -0.00130571 Jy ! Component: 3900 - total flux cleaned = -0.00132897 Jy ! Component: 3950 - total flux cleaned = -0.00134051 Jy ! Component: 4000 - total flux cleaned = -0.00132899 Jy ! Component: 4050 - total flux cleaned = -0.00138673 Jy ! Total flux subtracted in 4096 components = -0.00136364 Jy ! Clean residual min=-0.000657 max=0.000884 Jy/beam ! Clean residual mean=-0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0636322 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 298 components and 0.0636323 Jy ![Exited script file: muppet] wmap "J0253-1200_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.759 x 7.362 at -3.58 degrees (North through East) ! Clean map min=-0.0018432 max=0.052101 Jy/beam ! Writing clean map to FITS file: J0253-1200_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0521009 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179767 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03511 1.03511 2.07022 4.14044 8.28089 16.5618 33.1235 66.2471 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.759 x 7.362 at -3.58 degrees (North through East) ! Clean map min=-0.0018432 max=0.052101 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0253-1200_S_2017_07_16_pus_uvs.log closed on Thu May 9 10:59:56 2019