! Started logfile: J0252-2219_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:02:34 2019 obs J0252-2219_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0252-2219_S_2017_01_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77193 visibilities/baseline/integration-bin. ! Found source: J0252-2219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0252-2219_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.789085Jy sigma=0.004662 ! Fit after self-cal, rms=0.774091Jy sigma=0.004581 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=11.75 mas, bpa=17.6 degrees ! Estimated noise=1829.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179106 Jy ! Component: 100 - total flux cleaned = 0.219521 Jy ! Total flux subtracted in 100 components = 0.219521 Jy ! Clean residual min=-0.015680 max=0.015649 Jy/beam ! Clean residual mean=0.000027 rms=0.003856 Jy/beam ! Combined flux in latest and established models = 0.219521 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.219521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161071Jy sigma=0.000769 ! Fit after self-cal, rms=0.161065Jy sigma=0.000769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=13.15 mas, bpa=15.67 degrees ! Estimated noise=1200.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259509 Jy ! Component: 100 - total flux cleaned = 0.0376185 Jy ! Component: 150 - total flux cleaned = 0.0443017 Jy ! Component: 200 - total flux cleaned = 0.0485314 Jy ! Total flux subtracted in 200 components = 0.0485314 Jy ! Clean residual min=-0.009903 max=0.015083 Jy/beam ! Clean residual mean=0.000071 rms=0.003482 Jy/beam ! Combined flux in latest and established models = 0.268052 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 45 components and 0.268052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157219Jy sigma=0.000737 ! Fit after self-cal, rms=0.157189Jy sigma=0.000736 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 0.99 KP 0.94 ! LA 0.95 MK 1.00* NL 0.85 OV 0.94 ! PT 1.39 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.06 KP 0.90 ! LA 0.93 MK 1.00* NL 0.96 OV 0.96 ! PT 1.45 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 1.00 KP 0.92 ! LA 0.95 MK 1.00* NL 0.94 OV 0.91 ! PT 1.49 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.02 KP 0.75 ! LA 0.83 MK 1.00* NL 1.96 OV 0.89 ! PT 1.40 SC 1.12 ! ! ! Fit before self-cal, rms=0.157189Jy sigma=0.000736 ! Fit after self-cal, rms=0.155768Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=13.18 mas, bpa=15.61 degrees ! Estimated noise=1190.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.70352e-05 Jy ! Component: 100 - total flux cleaned = -0.000192345 Jy ! Component: 150 - total flux cleaned = -0.000197185 Jy ! Component: 200 - total flux cleaned = -0.000201063 Jy ! Total flux subtracted in 200 components = -0.000201063 Jy ! Clean residual min=-0.004959 max=0.005954 Jy/beam ! Clean residual mean=-0.000026 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.267851 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.267851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155692Jy sigma=0.000678 ! Fit after self-cal, rms=0.156245Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156245Jy sigma=0.000677 ! Fit after self-cal, rms=0.157998Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.843 mas, bmaj=13.13 mas, bpa=15.42 degrees ! Estimated noise=1194.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145651 Jy ! Component: 100 - total flux cleaned = 0.00163902 Jy ! Component: 150 - total flux cleaned = 0.0016409 Jy ! Component: 200 - total flux cleaned = 0.00161476 Jy ! Total flux subtracted in 200 components = 0.00161476 Jy ! Clean residual min=-0.003439 max=0.003585 Jy/beam ! Clean residual mean=-0.000012 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.269466 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 76 components and 0.269466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157977Jy sigma=0.000669 ! Fit after self-cal, rms=0.158039Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.22504e-05 Jy ! Component: 100 - total flux cleaned = -4.86551e-05 Jy ! Component: 150 - total flux cleaned = -9.01218e-05 Jy ! Component: 200 - total flux cleaned = -9.00405e-05 Jy ! Total flux subtracted in 200 components = -9.00405e-05 Jy ! Clean residual min=-0.003428 max=0.003562 Jy/beam ! Clean residual mean=-0.000013 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.269376 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.269376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158031Jy sigma=0.000668 ! Fit after self-cal, rms=0.158027Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158027Jy sigma=0.000668 ! Fit after self-cal, rms=0.158645Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=13.09 mas, bpa=15.35 degrees ! Estimated noise=1193.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134832 Jy ! Component: 100 - total flux cleaned = 0.000105417 Jy ! Component: 150 - total flux cleaned = 0.000105474 Jy ! Component: 200 - total flux cleaned = 0.000106535 Jy ! Total flux subtracted in 200 components = 0.000106535 Jy ! Clean residual min=-0.003370 max=0.003193 Jy/beam ! Clean residual mean=-0.000010 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.269483 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.269483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158635Jy sigma=0.000668 ! Fit after self-cal, rms=0.158633Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87108e-05 Jy ! Component: 100 - total flux cleaned = -6.6662e-05 Jy ! Component: 150 - total flux cleaned = -0.00010116 Jy ! Component: 200 - total flux cleaned = -0.000117016 Jy ! Total flux subtracted in 200 components = -0.000117016 Jy ! Clean residual min=-0.003354 max=0.003183 Jy/beam ! Clean residual mean=-0.000010 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.269366 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.269366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158628Jy sigma=0.000668 ! Fit after self-cal, rms=0.158626Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158626Jy sigma=0.000668 ! Fit after self-cal, rms=0.158591Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.681 mas, bmaj=18.29 mas, bpa=6.039 degrees ! Estimated noise=1413.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158937 Jy ! Component: 100 - total flux cleaned = 0.000182212 Jy ! Component: 150 - total flux cleaned = 0.000214382 Jy ! Component: 200 - total flux cleaned = 0.000200288 Jy ! Total flux subtracted in 200 components = 0.000200288 Jy ! Clean residual min=-0.003801 max=0.003448 Jy/beam ! Clean residual mean=-0.000016 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.269566 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 106 components and 0.269566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158592Jy sigma=0.000668 ! Fit after self-cal, rms=0.158587Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.6871e-05 Jy ! Component: 100 - total flux cleaned = -4.4395e-05 Jy ! Component: 150 - total flux cleaned = -5.4377e-05 Jy ! Component: 200 - total flux cleaned = -7.41599e-05 Jy ! Total flux subtracted in 200 components = -7.41599e-05 Jy ! Clean residual min=-0.003797 max=0.003461 Jy/beam ! Clean residual mean=-0.000016 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.269492 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 113 components and 0.269492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158589Jy sigma=0.000668 ! Fit after self-cal, rms=0.158588Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=13.07 mas, bpa=15.32 degrees ! Estimated noise=1193.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.839 x 13.07 at 15.32 degrees (North through East) ! Clean map min=-0.0032574 max=0.23938 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=11.6 mas, bpa=17.05 degrees ! Estimated noise=1861.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181844 Jy ! Component: 100 - total flux cleaned = 0.223654 Jy ! Component: 150 - total flux cleaned = 0.241921 Jy ! Component: 200 - total flux cleaned = 0.25233 Jy ! Total flux subtracted in 200 components = 0.25233 Jy ! Clean residual min=-0.005625 max=0.005593 Jy/beam ! Clean residual mean=-0.000013 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.25233 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.25233 Jy ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=13.07 mas, bpa=15.32 degrees ! Estimated noise=1193.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00839399 Jy ! Component: 100 - total flux cleaned = 0.0126628 Jy ! Component: 150 - total flux cleaned = 0.0150129 Jy ! Component: 200 - total flux cleaned = 0.0155996 Jy ! Total flux subtracted in 200 components = 0.0155996 Jy ! Clean residual min=-0.003280 max=0.003288 Jy/beam ! Clean residual mean=-0.000012 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.267929 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.267929 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.681 mas, bmaj=18.29 mas, bpa=6.039 degrees ! Estimated noise=1413.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118919 Jy ! Component: 100 - total flux cleaned = 0.00131838 Jy ! Component: 150 - total flux cleaned = 0.00135504 Jy ! Component: 200 - total flux cleaned = 0.00129455 Jy ! Total flux subtracted in 200 components = 0.00129455 Jy ! Clean residual min=-0.003950 max=0.003440 Jy/beam ! Clean residual mean=-0.000017 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.269224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.59529e-05 Jy ! Component: 100 - total flux cleaned = -7.41776e-05 Jy ! Component: 150 - total flux cleaned = -0.000139639 Jy ! Component: 200 - total flux cleaned = -0.000200595 Jy ! Total flux subtracted in 200 components = -0.000200595 Jy ! Clean residual min=-0.003893 max=0.003399 Jy/beam ! Clean residual mean=-0.000017 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.269023 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.269023 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.839 mas, bmaj=13.07 mas, bpa=15.32 degrees ! Estimated noise=1193.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.49511e-05 Jy ! Component: 100 - total flux cleaned = -9.72135e-06 Jy ! Component: 150 - total flux cleaned = -9.4993e-05 Jy ! Component: 200 - total flux cleaned = -0.000145026 Jy ! Total flux subtracted in 200 components = -0.000145026 Jy ! Clean residual min=-0.003363 max=0.003209 Jy/beam ! Clean residual mean=-0.000011 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.268878 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.268878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158615Jy sigma=0.000668 ! Fit after self-cal, rms=0.158599Jy sigma=0.000668 wmodel J0252-2219_S_2017_01_16_pus_map.mod ! Writing 64 model components to file: J0252-2219_S_2017_01_16_pus_map.mod wobs J0252-2219_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0252-2219_S_2017_01_16_pus_uvs.fits wwins J0252-2219_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0252-2219_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156209 Jy ! Component: 100 - total flux cleaned = -0.000745171 Jy ! Component: 150 - total flux cleaned = -0.00125332 Jy ! Component: 200 - total flux cleaned = -0.00159326 Jy ! Component: 250 - total flux cleaned = -0.00205706 Jy ! Component: 300 - total flux cleaned = -0.00223444 Jy ! Component: 350 - total flux cleaned = -0.00240744 Jy ! Component: 400 - total flux cleaned = -0.00253247 Jy ! Component: 450 - total flux cleaned = -0.00265433 Jy ! Component: 500 - total flux cleaned = -0.00265458 Jy ! Component: 550 - total flux cleaned = -0.0027698 Jy ! Component: 600 - total flux cleaned = -0.00273181 Jy ! Component: 650 - total flux cleaned = -0.00287974 Jy ! Component: 700 - total flux cleaned = -0.00295106 Jy ! Component: 750 - total flux cleaned = -0.00305755 Jy ! Component: 800 - total flux cleaned = -0.00326527 Jy ! Component: 850 - total flux cleaned = -0.00336649 Jy ! Component: 900 - total flux cleaned = -0.00339939 Jy ! Component: 950 - total flux cleaned = -0.00346449 Jy ! Component: 1000 - total flux cleaned = -0.00352919 Jy ! Component: 1050 - total flux cleaned = -0.00349709 Jy ! Component: 1100 - total flux cleaned = -0.00359082 Jy ! Component: 1150 - total flux cleaned = -0.00355994 Jy ! Component: 1200 - total flux cleaned = -0.00368033 Jy ! Component: 1250 - total flux cleaned = -0.00374006 Jy ! Component: 1300 - total flux cleaned = -0.00382818 Jy ! Component: 1350 - total flux cleaned = -0.00388603 Jy ! Component: 1400 - total flux cleaned = -0.00397135 Jy ! Component: 1450 - total flux cleaned = -0.00402746 Jy ! Component: 1500 - total flux cleaned = -0.00408251 Jy ! Component: 1550 - total flux cleaned = -0.00413681 Jy ! Component: 1600 - total flux cleaned = -0.00416337 Jy ! Component: 1650 - total flux cleaned = -0.0041372 Jy ! Component: 1700 - total flux cleaned = -0.0042423 Jy ! Component: 1750 - total flux cleaned = -0.00424217 Jy ! Component: 1800 - total flux cleaned = -0.00442169 Jy ! Component: 1850 - total flux cleaned = -0.00449767 Jy ! Component: 1900 - total flux cleaned = -0.00459809 Jy ! Component: 1950 - total flux cleaned = -0.00487074 Jy ! Component: 2000 - total flux cleaned = -0.00489483 Jy ! Component: 2050 - total flux cleaned = -0.00506468 Jy ! Component: 2100 - total flux cleaned = -0.0051369 Jy ! Component: 2150 - total flux cleaned = -0.00527966 Jy ! Component: 2200 - total flux cleaned = -0.00544447 Jy ! Component: 2250 - total flux cleaned = -0.00553824 Jy ! Component: 2300 - total flux cleaned = -0.00567734 Jy ! Component: 2350 - total flux cleaned = -0.0057691 Jy ! Component: 2400 - total flux cleaned = -0.00588274 Jy ! Component: 2450 - total flux cleaned = -0.00597322 Jy ! Component: 2500 - total flux cleaned = -0.00608516 Jy ! Component: 2550 - total flux cleaned = -0.00617393 Jy ! Component: 2600 - total flux cleaned = -0.00626195 Jy ! Component: 2650 - total flux cleaned = -0.0063927 Jy ! Component: 2700 - total flux cleaned = -0.00641413 Jy ! Component: 2750 - total flux cleaned = -0.00647872 Jy ! Component: 2800 - total flux cleaned = -0.00654257 Jy ! Component: 2850 - total flux cleaned = -0.00664792 Jy ! Component: 2900 - total flux cleaned = -0.00673126 Jy ! Component: 2950 - total flux cleaned = -0.00666918 Jy ! Component: 3000 - total flux cleaned = -0.00675173 Jy ! Component: 3050 - total flux cleaned = -0.00679252 Jy ! Component: 3100 - total flux cleaned = -0.0068129 Jy ! Component: 3150 - total flux cleaned = -0.00689348 Jy ! Component: 3200 - total flux cleaned = -0.00687337 Jy ! Component: 3250 - total flux cleaned = -0.00691311 Jy ! Component: 3300 - total flux cleaned = -0.0069525 Jy ! Component: 3350 - total flux cleaned = -0.0070109 Jy ! Component: 3400 - total flux cleaned = -0.00703039 Jy ! Component: 3450 - total flux cleaned = -0.00708814 Jy ! Component: 3500 - total flux cleaned = -0.00718391 Jy ! Component: 3550 - total flux cleaned = -0.00716511 Jy ! Component: 3600 - total flux cleaned = -0.00722196 Jy ! Component: 3650 - total flux cleaned = -0.00725953 Jy ! Component: 3700 - total flux cleaned = -0.00731538 Jy ! Component: 3750 - total flux cleaned = -0.00731522 Jy ! Component: 3800 - total flux cleaned = -0.00733392 Jy ! Component: 3850 - total flux cleaned = -0.00737056 Jy ! Component: 3900 - total flux cleaned = -0.00738882 Jy ! Component: 3950 - total flux cleaned = -0.00749697 Jy ! Component: 4000 - total flux cleaned = -0.0074789 Jy ! Component: 4050 - total flux cleaned = -0.0075322 Jy ! Total flux subtracted in 4096 components = -0.00754985 Jy ! Clean residual min=-0.001260 max=0.001239 Jy/beam ! Clean residual mean=-0.000003 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.261328 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 355 components and 0.261328 Jy ![Exited script file: muppet] wmap "J0252-2219_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.839 x 13.07 at 15.32 degrees (North through East) ! Clean map min=-0.0022437 max=0.23916 Jy/beam ! Writing clean map to FITS file: J0252-2219_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.239162 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344713 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.4324 0.4324 0.864801 1.7296 3.4592 6.91841 13.8368 27.6736 55.3473 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.239 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.839 x 13.07 at 15.32 degrees (North through East) ! Clean map min=-0.0022437 max=0.23916 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0252-2219_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:02:40 2019