! Started logfile: J0250-2627_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:02:29 2019 obs J0250-2627_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0250-2627_S_2017_01_16_pus_uva.fits ! AN table 1: 118 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.635028 visibilities/baseline/integration-bin. ! Found source: J0250-2627 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 13488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0250-2627_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901581Jy sigma=0.005167 ! Fit after self-cal, rms=0.880851Jy sigma=0.005080 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=12.03 mas, bpa=16.15 degrees ! Estimated noise=2237.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100059 Jy ! Component: 100 - total flux cleaned = 0.12704 Jy ! Total flux subtracted in 100 components = 0.12704 Jy ! Clean residual min=-0.009338 max=0.015920 Jy/beam ! Clean residual mean=0.000002 rms=0.002779 Jy/beam ! Combined flux in latest and established models = 0.12704 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.12704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156042Jy sigma=0.000696 ! Fit after self-cal, rms=0.155981Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=14.08 mas, bpa=15.53 degrees ! Estimated noise=1126.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215647 Jy ! Component: 100 - total flux cleaned = 0.0327857 Jy ! Component: 150 - total flux cleaned = 0.0390595 Jy ! Component: 200 - total flux cleaned = 0.0404753 Jy ! Total flux subtracted in 200 components = 0.0404753 Jy ! Clean residual min=-0.006447 max=0.008399 Jy/beam ! Clean residual mean=0.000045 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.167515 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 50 components and 0.167515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152994Jy sigma=0.000672 ! Fit after self-cal, rms=0.152760Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 1.06 KP 0.91 ! LA 0.95 MK 1.00* NL 0.91 OV 0.97 ! PT 1.42 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.22 KP 0.92 ! LA 0.93 MK 1.00* NL 1.04 OV 0.98 ! PT 1.35 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.15 KP 0.93 ! LA 0.98 MK 1.00* NL 0.99 OV 0.89 ! PT 1.29 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.96 KP 0.87 ! LA 0.60 MK 1.00* NL 1.00* OV 0.92 ! PT 1.36 SC 0.94 ! ! ! Fit before self-cal, rms=0.152760Jy sigma=0.000670 ! Fit after self-cal, rms=0.146693Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=14.28 mas, bpa=15.66 degrees ! Estimated noise=1109.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342424 Jy ! Component: 100 - total flux cleaned = 0.00378625 Jy ! Component: 150 - total flux cleaned = 0.00388155 Jy ! Component: 200 - total flux cleaned = 0.00373011 Jy ! Total flux subtracted in 200 components = 0.00373011 Jy ! Clean residual min=-0.004713 max=0.004144 Jy/beam ! Clean residual mean=-0.000001 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.171246 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 78 components and 0.171246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146546Jy sigma=0.000656 ! Fit after self-cal, rms=0.146813Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146813Jy sigma=0.000655 ! Fit after self-cal, rms=0.151593Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.848 mas, bmaj=14.22 mas, bpa=15.44 degrees ! Estimated noise=1110.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305483 Jy ! Component: 100 - total flux cleaned = 0.00343691 Jy ! Component: 150 - total flux cleaned = 0.0033764 Jy ! Component: 200 - total flux cleaned = 0.00332747 Jy ! Total flux subtracted in 200 components = 0.00332747 Jy ! Clean residual min=-0.003354 max=0.003583 Jy/beam ! Clean residual mean=0.000010 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.174573 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 0.174573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151533Jy sigma=0.000652 ! Fit after self-cal, rms=0.151628Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449857 Jy ! Component: 100 - total flux cleaned = 0.000457657 Jy ! Component: 150 - total flux cleaned = 0.000459901 Jy ! Component: 200 - total flux cleaned = 0.000460532 Jy ! Total flux subtracted in 200 components = 0.000460532 Jy ! Clean residual min=-0.003158 max=0.003435 Jy/beam ! Clean residual mean=0.000010 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.175034 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.175034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151595Jy sigma=0.000652 ! Fit after self-cal, rms=0.151587Jy sigma=0.000652 ! Inverting map ! Added new window around map position (-86.5, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194254 Jy ! Component: 100 - total flux cleaned = 0.00210792 Jy ! Component: 150 - total flux cleaned = 0.00186494 Jy ! Component: 200 - total flux cleaned = 0.00158674 Jy ! Total flux subtracted in 200 components = 0.00158674 Jy ! Clean residual min=-0.003142 max=0.002706 Jy/beam ! Clean residual mean=0.000006 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.17662 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 0.17662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151489Jy sigma=0.000651 ! Fit after self-cal, rms=0.151477Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151477Jy sigma=0.000651 ! Fit after self-cal, rms=0.152743Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=14.18 mas, bpa=15.3 degrees ! Estimated noise=1107.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000892073 Jy ! Component: 100 - total flux cleaned = 0.000946114 Jy ! Component: 150 - total flux cleaned = 0.000761357 Jy ! Component: 200 - total flux cleaned = 0.000676978 Jy ! Total flux subtracted in 200 components = 0.000676978 Jy ! Clean residual min=-0.002992 max=0.002647 Jy/beam ! Clean residual mean=0.000009 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.177297 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 148 components and 0.177297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152700Jy sigma=0.000651 ! Fit after self-cal, rms=0.152738Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.5284e-05 Jy ! Component: 100 - total flux cleaned = -0.000163965 Jy ! Component: 150 - total flux cleaned = -0.000354445 Jy ! Component: 200 - total flux cleaned = -0.000537417 Jy ! Total flux subtracted in 200 components = -0.000537417 Jy ! Clean residual min=-0.002933 max=0.002606 Jy/beam ! Clean residual mean=0.000009 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.17676 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 162 components and 0.17676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152715Jy sigma=0.000650 ! Fit after self-cal, rms=0.152711Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152711Jy sigma=0.000650 ! Fit after self-cal, rms=0.152771Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=20.77 mas, bpa=6.973 degrees ! Estimated noise=1293.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000455326 Jy ! Component: 100 - total flux cleaned = -0.00115294 Jy ! Component: 150 - total flux cleaned = -0.00159686 Jy ! Component: 200 - total flux cleaned = -0.00191979 Jy ! Total flux subtracted in 200 components = -0.00191979 Jy ! Clean residual min=-0.002754 max=0.002697 Jy/beam ! Clean residual mean=0.000018 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.17484 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 168 components and 0.17484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152759Jy sigma=0.000650 ! Fit after self-cal, rms=0.152759Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.29084e-05 Jy ! Component: 100 - total flux cleaned = -0.000421208 Jy ! Component: 150 - total flux cleaned = -0.00063901 Jy ! Component: 200 - total flux cleaned = -0.000839886 Jy ! Total flux subtracted in 200 components = -0.000839886 Jy ! Clean residual min=-0.002669 max=0.002660 Jy/beam ! Clean residual mean=0.000019 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.174 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 182 components and 0.174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152752Jy sigma=0.000650 ! Fit after self-cal, rms=0.152750Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=14.16 mas, bpa=15.25 degrees ! Estimated noise=1109.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 14.16 at 15.25 degrees (North through East) ! Clean map min=-0.0031804 max=0.11831 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=12.09 mas, bpa=15.74 degrees ! Estimated noise=2192.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0973819 Jy ! Component: 100 - total flux cleaned = 0.128335 Jy ! Component: 150 - total flux cleaned = 0.143489 Jy ! Component: 200 - total flux cleaned = 0.153176 Jy ! Total flux subtracted in 200 components = 0.153176 Jy ! Clean residual min=-0.005687 max=0.005723 Jy/beam ! Clean residual mean=0.000005 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.153177 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.153177 Jy ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=14.16 mas, bpa=15.25 degrees ! Estimated noise=1109.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959113 Jy ! Component: 100 - total flux cleaned = 0.0149237 Jy ! Component: 150 - total flux cleaned = 0.0181129 Jy ! Component: 200 - total flux cleaned = 0.020093 Jy ! Total flux subtracted in 200 components = 0.020093 Jy ! Clean residual min=-0.003110 max=0.002949 Jy/beam ! Clean residual mean=0.000004 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.17327 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 58 components and 0.17327 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=20.77 mas, bpa=6.973 degrees ! Estimated noise=1293.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216786 Jy ! Component: 100 - total flux cleaned = 0.0022865 Jy ! Component: 150 - total flux cleaned = 0.00202014 Jy ! Component: 200 - total flux cleaned = 0.00178496 Jy ! Total flux subtracted in 200 components = 0.00178496 Jy ! Clean residual min=-0.003202 max=0.002976 Jy/beam ! Clean residual mean=0.000018 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.175055 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163119 Jy ! Component: 100 - total flux cleaned = -0.000469907 Jy ! Component: 150 - total flux cleaned = -0.000708102 Jy ! Component: 200 - total flux cleaned = -0.000888968 Jy ! Total flux subtracted in 200 components = -0.000888968 Jy ! Clean residual min=-0.003024 max=0.002812 Jy/beam ! Clean residual mean=0.000019 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.174166 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 114 components and 0.174166 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=14.16 mas, bpa=15.25 degrees ! Estimated noise=1109.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163744 Jy ! Component: 100 - total flux cleaned = -0.000292969 Jy ! Component: 150 - total flux cleaned = -0.000414738 Jy ! Component: 200 - total flux cleaned = -0.000586909 Jy ! Total flux subtracted in 200 components = -0.000586909 Jy ! Clean residual min=-0.002918 max=0.002823 Jy/beam ! Clean residual mean=0.000010 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.173579 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.173579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152806Jy sigma=0.000650 ! Fit after self-cal, rms=0.152773Jy sigma=0.000650 wmodel J0250-2627_S_2017_01_16_pus_map.mod ! Writing 135 model components to file: J0250-2627_S_2017_01_16_pus_map.mod wobs J0250-2627_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0250-2627_S_2017_01_16_pus_uvs.fits wwins J0250-2627_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J0250-2627_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430999 Jy ! Component: 100 - total flux cleaned = -0.000717813 Jy ! Component: 150 - total flux cleaned = -0.000805892 Jy ! Component: 200 - total flux cleaned = -0.000763587 Jy ! Component: 250 - total flux cleaned = -0.000883635 Jy ! Component: 300 - total flux cleaned = -0.00103731 Jy ! Component: 350 - total flux cleaned = -0.00118583 Jy ! Component: 400 - total flux cleaned = -0.00125785 Jy ! Component: 450 - total flux cleaned = -0.00139806 Jy ! Component: 500 - total flux cleaned = -0.00139749 Jy ! Component: 550 - total flux cleaned = -0.00149749 Jy ! Component: 600 - total flux cleaned = -0.00156232 Jy ! Component: 650 - total flux cleaned = -0.00165794 Jy ! Component: 700 - total flux cleaned = -0.00165744 Jy ! Component: 750 - total flux cleaned = -0.00159703 Jy ! Component: 800 - total flux cleaned = -0.00162722 Jy ! Component: 850 - total flux cleaned = -0.00156914 Jy ! Component: 900 - total flux cleaned = -0.00162652 Jy ! Component: 950 - total flux cleaned = -0.00156939 Jy ! Component: 1000 - total flux cleaned = -0.001569 Jy ! Component: 1050 - total flux cleaned = -0.00140433 Jy ! Component: 1100 - total flux cleaned = -0.00140448 Jy ! Component: 1150 - total flux cleaned = -0.00129785 Jy ! Component: 1200 - total flux cleaned = -0.00127206 Jy ! Component: 1250 - total flux cleaned = -0.00119417 Jy ! Component: 1300 - total flux cleaned = -0.00106579 Jy ! Component: 1350 - total flux cleaned = -0.000964726 Jy ! Component: 1400 - total flux cleaned = -0.000839562 Jy ! Component: 1450 - total flux cleaned = -0.00079048 Jy ! Component: 1500 - total flux cleaned = -0.000716861 Jy ! Component: 1550 - total flux cleaned = -0.000692583 Jy ! Component: 1600 - total flux cleaned = -0.000596727 Jy ! Component: 1650 - total flux cleaned = -0.000549378 Jy ! Component: 1700 - total flux cleaned = -0.000572659 Jy ! Component: 1750 - total flux cleaned = -0.000503041 Jy ! Component: 1800 - total flux cleaned = -0.00045697 Jy ! Component: 1850 - total flux cleaned = -0.000365766 Jy ! Component: 1900 - total flux cleaned = -0.000320842 Jy ! Component: 1950 - total flux cleaned = -0.000253822 Jy ! Component: 2000 - total flux cleaned = -0.000231761 Jy ! Component: 2050 - total flux cleaned = -0.000188094 Jy ! Component: 2100 - total flux cleaned = -0.000209934 Jy ! Component: 2150 - total flux cleaned = -0.000231157 Jy ! Component: 2200 - total flux cleaned = -0.000167007 Jy ! Component: 2250 - total flux cleaned = -8.28002e-05 Jy ! Component: 2300 - total flux cleaned = -0.000124482 Jy ! Component: 2350 - total flux cleaned = -8.29703e-05 Jy ! Component: 2400 - total flux cleaned = -4.19221e-05 Jy ! Component: 2450 - total flux cleaned = -8.26339e-05 Jy ! Component: 2500 - total flux cleaned = -2.21801e-05 Jy ! Component: 2550 - total flux cleaned = -4.21606e-05 Jy ! Component: 2600 - total flux cleaned = 7.66935e-05 Jy ! Component: 2650 - total flux cleaned = 5.66773e-05 Jy ! Component: 2700 - total flux cleaned = 9.57037e-05 Jy ! Component: 2750 - total flux cleaned = 1.79554e-05 Jy ! Component: 2800 - total flux cleaned = 5.67685e-05 Jy ! Component: 2850 - total flux cleaned = 3.75407e-05 Jy ! Component: 2900 - total flux cleaned = 1.86336e-05 Jy ! Component: 2950 - total flux cleaned = -3.76924e-05 Jy ! Component: 3000 - total flux cleaned = 1.83934e-05 Jy ! Component: 3050 - total flux cleaned = 3.72995e-05 Jy ! Component: 3100 - total flux cleaned = 3.74648e-05 Jy ! Component: 3150 - total flux cleaned = 7.42273e-05 Jy ! Component: 3200 - total flux cleaned = 0.000110523 Jy ! Component: 3250 - total flux cleaned = 0.000110391 Jy ! Component: 3300 - total flux cleaned = 9.23015e-05 Jy ! Component: 3350 - total flux cleaned = 7.4385e-05 Jy ! Component: 3400 - total flux cleaned = 3.87965e-05 Jy ! Component: 3450 - total flux cleaned = 3.89228e-05 Jy ! Component: 3500 - total flux cleaned = 7.40649e-05 Jy ! Component: 3550 - total flux cleaned = 2.16267e-05 Jy ! Component: 3600 - total flux cleaned = 4.34286e-06 Jy ! Component: 3650 - total flux cleaned = -3.031e-05 Jy ! Component: 3700 - total flux cleaned = -4.74941e-05 Jy ! Component: 3750 - total flux cleaned = -1.34463e-05 Jy ! Component: 3800 - total flux cleaned = -3.04454e-05 Jy ! Component: 3850 - total flux cleaned = 3.20643e-06 Jy ! Component: 3900 - total flux cleaned = -3.03038e-05 Jy ! Component: 3950 - total flux cleaned = 5.30685e-05 Jy ! Component: 4000 - total flux cleaned = 1.98683e-05 Jy ! Component: 4050 - total flux cleaned = 3.53189e-06 Jy ! Total flux subtracted in 4096 components = -4.55458e-05 Jy ! Clean residual min=-0.001331 max=0.000898 Jy/beam ! Clean residual mean=0.000003 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.173533 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 402 components and 0.173533 Jy ![Exited script file: muppet] wmap "J0250-2627_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 14.16 at 15.25 degrees (North through East) ! Clean map min=-0.0028902 max=0.11802 Jy/beam ! Writing clean map to FITS file: J0250-2627_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031399 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.798152 0.798152 1.5963 3.19261 6.38521 12.7704 25.5409 51.0817 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.85 x 14.16 at 15.25 degrees (North through East) ! Clean map min=-0.0028902 max=0.11802 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0250-2627_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:02:34 2019