! Started logfile: J0240+6113_S_2017_05_27_pus_uvs.log on Fri May 3 10:55:44 2019 obs J0240+6113_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0240+6113_S_2017_05_27_pus_uva.fits ! AN table 1: 290 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.931111 visibilities/baseline/integration-bin. ! Found source: J0240+6113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 48604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0240+6113_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1557 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.831772Jy sigma=0.017913 ! Fit after self-cal, rms=0.822776Jy sigma=0.017875 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=4.194 mas, bpa=-11.34 degrees ! Estimated noise=708.455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109618 Jy ! Component: 100 - total flux cleaned = 0.147607 Jy ! Total flux subtracted in 100 components = 0.147607 Jy ! Clean residual min=-0.013191 max=0.021338 Jy/beam ! Clean residual mean=0.000009 rms=0.004627 Jy/beam ! Combined flux in latest and established models = 0.147607 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.147607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130919Jy sigma=0.002172 ! Fit after self-cal, rms=0.130835Jy sigma=0.002172 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.029 mas, bmaj=4.943 mas, bpa=-5.756 degrees ! Estimated noise=349.317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284889 Jy ! Component: 100 - total flux cleaned = 0.0453941 Jy ! Component: 150 - total flux cleaned = 0.0557795 Jy ! Component: 200 - total flux cleaned = 0.0622709 Jy ! Total flux subtracted in 200 components = 0.0622709 Jy ! Clean residual min=-0.014398 max=0.023751 Jy/beam ! Clean residual mean=-0.000000 rms=0.005470 Jy/beam ! Combined flux in latest and established models = 0.209878 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.209878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119658Jy sigma=0.002298 ! Fit after self-cal, rms=0.119571Jy sigma=0.002297 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.86 HN 0.89 KP 0.92 ! LA 0.92 MK 1.07 NL 0.81 OV 0.93 ! PT 0.98 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 9.11 FD 0.91 HN 0.97 KP 0.89 ! LA 0.88 MK 1.08 NL 0.94 OV 1.47 ! PT 0.95 SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 7.33 FD 0.93 HN 0.91 KP 0.91 ! LA 0.93 MK 1.10 NL 0.91 OV 0.89 ! PT 0.94 SC 0.91 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.87 KP 1.00* ! LA 0.99 MK 1.05 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.119571Jy sigma=0.002297 ! Fit after self-cal, rms=0.574864Jy sigma=0.000902 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=5.054 mas, bpa=-18.58 degrees ! Estimated noise=405.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208652 Jy ! Component: 100 - total flux cleaned = 0.0213614 Jy ! Component: 150 - total flux cleaned = 0.0210236 Jy ! Component: 200 - total flux cleaned = 0.0205289 Jy ! Total flux subtracted in 200 components = 0.0205289 Jy ! Clean residual min=-0.010584 max=0.008558 Jy/beam ! Clean residual mean=-0.000009 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.230407 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.230407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568753Jy sigma=0.000903 ! Fit after self-cal, rms=0.569170Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569170Jy sigma=0.000895 ! Fit after self-cal, rms=0.373317Jy sigma=0.000724 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=4.951 mas, bpa=-14.94 degrees ! Estimated noise=407.967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436748 Jy ! Component: 100 - total flux cleaned = 0.00487273 Jy ! Component: 150 - total flux cleaned = 0.00481474 Jy ! Component: 200 - total flux cleaned = 0.00476543 Jy ! Total flux subtracted in 200 components = 0.00476543 Jy ! Clean residual min=-0.004072 max=0.002992 Jy/beam ! Clean residual mean=-0.000000 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.235173 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.235173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372602Jy sigma=0.000725 ! Fit after self-cal, rms=0.372563Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.30001e-06 Jy ! Component: 100 - total flux cleaned = -7.97754e-05 Jy ! Component: 150 - total flux cleaned = -0.000152607 Jy ! Component: 200 - total flux cleaned = -0.000184952 Jy ! Total flux subtracted in 200 components = -0.000184952 Jy ! Clean residual min=-0.004175 max=0.002955 Jy/beam ! Clean residual mean=-0.000001 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.234988 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.234988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372453Jy sigma=0.000723 ! Fit after self-cal, rms=0.372451Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372451Jy sigma=0.000723 ! Fit after self-cal, rms=0.390634Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=4.978 mas, bpa=-16.01 degrees ! Estimated noise=419.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415696 Jy ! Component: 100 - total flux cleaned = 0.00510447 Jy ! Component: 150 - total flux cleaned = 0.00505991 Jy ! Component: 200 - total flux cleaned = 0.00505997 Jy ! Total flux subtracted in 200 components = 0.00505997 Jy ! Clean residual min=-0.004128 max=0.002994 Jy/beam ! Clean residual mean=-0.000001 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.240048 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.240048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389969Jy sigma=0.000723 ! Fit after self-cal, rms=0.389970Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.82126e-05 Jy ! Component: 100 - total flux cleaned = -0.000109961 Jy ! Component: 150 - total flux cleaned = -0.000141343 Jy ! Component: 200 - total flux cleaned = -0.000171825 Jy ! Total flux subtracted in 200 components = -0.000171825 Jy ! Clean residual min=-0.004188 max=0.002980 Jy/beam ! Clean residual mean=-0.000001 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.239876 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.239876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389892Jy sigma=0.000723 ! Fit after self-cal, rms=0.389891Jy sigma=0.000723 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389891Jy sigma=0.000723 ! Fit after self-cal, rms=0.404853Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.509 mas, bmaj=9.017 mas, bpa=-52.26 degrees ! Estimated noise=529.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423374 Jy ! Component: 100 - total flux cleaned = 0.00423239 Jy ! Component: 150 - total flux cleaned = 0.00410992 Jy ! Component: 200 - total flux cleaned = 0.00400168 Jy ! Total flux subtracted in 200 components = 0.00400168 Jy ! Clean residual min=-0.004420 max=0.003120 Jy/beam ! Clean residual mean=-0.000000 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.243877 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.243877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404183Jy sigma=0.000723 ! Fit after self-cal, rms=0.404180Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.59232e-05 Jy ! Component: 100 - total flux cleaned = -0.000191178 Jy ! Component: 150 - total flux cleaned = -0.000271308 Jy ! Component: 200 - total flux cleaned = -0.000343146 Jy ! Total flux subtracted in 200 components = -0.000343146 Jy ! Clean residual min=-0.004459 max=0.003098 Jy/beam ! Clean residual mean=-0.000000 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.243534 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.243534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404037Jy sigma=0.000723 ! Fit after self-cal, rms=0.404037Jy sigma=0.000723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=4.998 mas, bpa=-16.8 degrees ! Estimated noise=431.909 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.96 x 4.998 at -16.8 degrees (North through East) ! Clean map min=-0.004235 max=0.17909 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=4.274 mas, bpa=-17.15 degrees ! Estimated noise=847.671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131566 Jy ! Component: 100 - total flux cleaned = 0.176625 Jy ! Component: 150 - total flux cleaned = 0.201542 Jy ! Component: 200 - total flux cleaned = 0.217011 Jy ! Total flux subtracted in 200 components = 0.217011 Jy ! Clean residual min=-0.004894 max=0.008182 Jy/beam ! Clean residual mean=0.000003 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.217011 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.217011 Jy ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=4.998 mas, bpa=-16.8 degrees ! Estimated noise=431.909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126193 Jy ! Component: 100 - total flux cleaned = 0.0192752 Jy ! Component: 150 - total flux cleaned = 0.0229613 Jy ! Component: 200 - total flux cleaned = 0.024423 Jy ! Total flux subtracted in 200 components = 0.024423 Jy ! Clean residual min=-0.004594 max=0.003281 Jy/beam ! Clean residual mean=-0.000000 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.241434 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 0.241434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.509 mas, bmaj=9.017 mas, bpa=-52.26 degrees ! Estimated noise=529.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111611 Jy ! Component: 100 - total flux cleaned = 0.00112233 Jy ! Component: 150 - total flux cleaned = 0.00107101 Jy ! Component: 200 - total flux cleaned = 0.00102365 Jy ! Total flux subtracted in 200 components = 0.00102365 Jy ! Clean residual min=-0.004557 max=0.003120 Jy/beam ! Clean residual mean=0.000000 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.242457 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.17516e-05 Jy ! Component: 100 - total flux cleaned = -8.1099e-05 Jy ! Component: 150 - total flux cleaned = -0.000118237 Jy ! Component: 200 - total flux cleaned = -0.000152166 Jy ! Total flux subtracted in 200 components = -0.000152166 Jy ! Clean residual min=-0.004546 max=0.003113 Jy/beam ! Clean residual mean=0.000000 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.242305 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.242305 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.96 mas, bmaj=4.998 mas, bpa=-16.8 degrees ! Estimated noise=431.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311262 Jy ! Component: 100 - total flux cleaned = 8.87046e-05 Jy ! Component: 150 - total flux cleaned = 0.000356979 Jy ! Component: 200 - total flux cleaned = 0.000619463 Jy ! Total flux subtracted in 200 components = 0.000619463 Jy ! Clean residual min=-0.004459 max=0.003170 Jy/beam ! Clean residual mean=-0.000000 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.242925 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.242925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403850Jy sigma=0.000723 ! Fit after self-cal, rms=0.403846Jy sigma=0.000723 wmodel J0240+6113_S_2017_05_27_pus_map.mod ! Writing 60 model components to file: J0240+6113_S_2017_05_27_pus_map.mod wobs J0240+6113_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0240+6113_S_2017_05_27_pus_uvs.fits wwins J0240+6113_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0240+6113_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187088 Jy ! Component: 100 - total flux cleaned = -0.00327024 Jy ! Component: 150 - total flux cleaned = -0.00432899 Jy ! Component: 200 - total flux cleaned = -0.00488983 Jy ! Component: 250 - total flux cleaned = -0.00521448 Jy ! Component: 300 - total flux cleaned = -0.0054772 Jy ! Component: 350 - total flux cleaned = -0.00573295 Jy ! Component: 400 - total flux cleaned = -0.00578295 Jy ! Component: 450 - total flux cleaned = -0.00573338 Jy ! Component: 500 - total flux cleaned = -0.00563612 Jy ! Component: 550 - total flux cleaned = -0.00563635 Jy ! Component: 600 - total flux cleaned = -0.0057309 Jy ! Component: 650 - total flux cleaned = -0.00573055 Jy ! Component: 700 - total flux cleaned = -0.00577699 Jy ! Component: 750 - total flux cleaned = -0.00591456 Jy ! Component: 800 - total flux cleaned = -0.00586945 Jy ! Component: 850 - total flux cleaned = -0.00609437 Jy ! Component: 900 - total flux cleaned = -0.00609387 Jy ! Component: 950 - total flux cleaned = -0.00609384 Jy ! Component: 1000 - total flux cleaned = -0.00604984 Jy ! Component: 1050 - total flux cleaned = -0.00609331 Jy ! Component: 1100 - total flux cleaned = -0.00613608 Jy ! Component: 1150 - total flux cleaned = -0.00617887 Jy ! Component: 1200 - total flux cleaned = -0.00609433 Jy ! Component: 1250 - total flux cleaned = -0.00617823 Jy ! Component: 1300 - total flux cleaned = -0.00617832 Jy ! Component: 1350 - total flux cleaned = -0.00621938 Jy ! Component: 1400 - total flux cleaned = -0.00621932 Jy ! Component: 1450 - total flux cleaned = -0.00613738 Jy ! Component: 1500 - total flux cleaned = -0.00621824 Jy ! Component: 1550 - total flux cleaned = -0.00621808 Jy ! Component: 1600 - total flux cleaned = -0.0062579 Jy ! Component: 1650 - total flux cleaned = -0.00621852 Jy ! Component: 1700 - total flux cleaned = -0.00625804 Jy ! Component: 1750 - total flux cleaned = -0.00617981 Jy ! Component: 1800 - total flux cleaned = -0.00610212 Jy ! Component: 1850 - total flux cleaned = -0.00610211 Jy ! Component: 1900 - total flux cleaned = -0.00610207 Jy ! Component: 1950 - total flux cleaned = -0.00606422 Jy ! Component: 2000 - total flux cleaned = -0.00606408 Jy ! Component: 2050 - total flux cleaned = -0.00610166 Jy ! Component: 2100 - total flux cleaned = -0.00610168 Jy ! Component: 2150 - total flux cleaned = -0.00599038 Jy ! Component: 2200 - total flux cleaned = -0.006101 Jy ! Component: 2250 - total flux cleaned = -0.00606414 Jy ! Component: 2300 - total flux cleaned = -0.00610036 Jy ! Component: 2350 - total flux cleaned = -0.0060279 Jy ! Component: 2400 - total flux cleaned = -0.00609989 Jy ! Component: 2450 - total flux cleaned = -0.00613589 Jy ! Component: 2500 - total flux cleaned = -0.00606454 Jy ! Component: 2550 - total flux cleaned = -0.00599376 Jy ! Component: 2600 - total flux cleaned = -0.00602912 Jy ! Component: 2650 - total flux cleaned = -0.00602894 Jy ! Component: 2700 - total flux cleaned = -0.00613365 Jy ! Component: 2750 - total flux cleaned = -0.00616814 Jy ! Component: 2800 - total flux cleaned = -0.00620275 Jy ! Component: 2850 - total flux cleaned = -0.00630545 Jy ! Component: 2900 - total flux cleaned = -0.00623728 Jy ! Component: 2950 - total flux cleaned = -0.00623711 Jy ! Component: 3000 - total flux cleaned = -0.00627095 Jy ! Component: 3050 - total flux cleaned = -0.00627084 Jy ! Component: 3100 - total flux cleaned = -0.00623742 Jy ! Component: 3150 - total flux cleaned = -0.00623738 Jy ! Component: 3200 - total flux cleaned = -0.0062043 Jy ! Component: 3250 - total flux cleaned = -0.00610556 Jy ! Component: 3300 - total flux cleaned = -0.00613846 Jy ! Component: 3350 - total flux cleaned = -0.00620364 Jy ! Component: 3400 - total flux cleaned = -0.00610608 Jy ! Component: 3450 - total flux cleaned = -0.00610603 Jy ! Component: 3500 - total flux cleaned = -0.00597731 Jy ! Component: 3550 - total flux cleaned = -0.00610576 Jy ! Component: 3600 - total flux cleaned = -0.00610561 Jy ! Component: 3650 - total flux cleaned = -0.00616902 Jy ! Component: 3700 - total flux cleaned = -0.00601109 Jy ! Component: 3750 - total flux cleaned = -0.00601117 Jy ! Component: 3800 - total flux cleaned = -0.00594867 Jy ! Component: 3850 - total flux cleaned = -0.00597975 Jy ! Component: 3900 - total flux cleaned = -0.00594856 Jy ! Component: 3950 - total flux cleaned = -0.0059487 Jy ! Component: 4000 - total flux cleaned = -0.00588704 Jy ! Component: 4050 - total flux cleaned = -0.00579521 Jy ! Total flux subtracted in 4096 components = -0.00573432 Jy ! Clean residual min=-0.002053 max=0.001813 Jy/beam ! Clean residual mean=-0.000001 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.23719 Jy keep ! Adding 367 model components to the UV plane model. ! The established model now contains 427 components and 0.23719 Jy ![Exited script file: muppet] wmap "J0240+6113_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.96 x 4.998 at -16.8 degrees (North through East) ! Clean map min=-0.0036473 max=0.18064 Jy/beam ! Writing clean map to FITS file: J0240+6113_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.180636 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000601093 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.998296 0.998296 1.99659 3.99318 7.98636 15.9727 31.9455 63.8909 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.18 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.96 x 4.998 at -16.8 degrees (North through East) ! Clean map min=-0.0036473 max=0.18064 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0240+6113_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:55:50 2019