! Started logfile: J0240+4216_S_2017_07_09_pus_uvs.log on Wed May 8 14:40:34 2019 obs J0240+4216_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0240+4216_S_2017_07_09_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893225 visibilities/baseline/integration-bin. ! Found source: J0240+4216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0240+4216_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 431 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883939Jy sigma=0.009137 ! Fit after self-cal, rms=0.876037Jy sigma=0.009063 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=4.998 mas, bpa=-3.071 degrees ! Estimated noise=1027.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977887 Jy ! Component: 100 - total flux cleaned = 0.119125 Jy ! Total flux subtracted in 100 components = 0.119125 Jy ! Clean residual min=-0.004620 max=0.006167 Jy/beam ! Clean residual mean=-0.000001 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.119125 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.119125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069255Jy sigma=0.000676 ! Fit after self-cal, rms=0.069250Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=5.767 mas, bpa=-1.918 degrees ! Estimated noise=674.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628536 Jy ! Component: 100 - total flux cleaned = 0.00858192 Jy ! Component: 150 - total flux cleaned = 0.00965686 Jy ! Component: 200 - total flux cleaned = 0.0100461 Jy ! Total flux subtracted in 200 components = 0.0100461 Jy ! Clean residual min=-0.002287 max=0.002176 Jy/beam ! Clean residual mean=-0.000000 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.129171 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 25 components and 0.129171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068713Jy sigma=0.000671 ! Fit after self-cal, rms=0.068716Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 0.94 KP 1.05 ! LA 1.04 MK 1.02 NL 0.91 OV 0.98 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 1.00 KP 0.97 ! LA 0.97 MK 1.03 NL 1.07 OV 1.11 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 0.99 KP 1.02 ! LA 1.00 MK 1.06 NL 1.02 OV 0.96 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.97 KP 1.00* ! LA 1.00 MK 1.19 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.068716Jy sigma=0.000671 ! Fit after self-cal, rms=0.068112Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=5.772 mas, bpa=-1.405 degrees ! Estimated noise=674.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.83699e-05 Jy ! Component: 100 - total flux cleaned = 6.31231e-05 Jy ! Component: 150 - total flux cleaned = 7.68123e-05 Jy ! Component: 200 - total flux cleaned = 7.69255e-05 Jy ! Total flux subtracted in 200 components = 7.69255e-05 Jy ! Clean residual min=-0.002081 max=0.002090 Jy/beam ! Clean residual mean=-0.000002 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.129248 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.129248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068105Jy sigma=0.000664 ! Fit after self-cal, rms=0.068121Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068121Jy sigma=0.000664 ! Fit after self-cal, rms=0.067725Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.574 mas, bmaj=5.786 mas, bpa=-1.658 degrees ! Estimated noise=675.065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124692 Jy ! Component: 100 - total flux cleaned = -0.000173258 Jy ! Component: 150 - total flux cleaned = -0.000184792 Jy ! Component: 200 - total flux cleaned = -0.000195256 Jy ! Total flux subtracted in 200 components = -0.000195256 Jy ! Clean residual min=-0.001735 max=0.001712 Jy/beam ! Clean residual mean=-0.000003 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.129053 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.129053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067723Jy sigma=0.000659 ! Fit after self-cal, rms=0.067740Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.37425e-06 Jy ! Component: 100 - total flux cleaned = -6.49017e-06 Jy ! Component: 150 - total flux cleaned = -1.61655e-05 Jy ! Component: 200 - total flux cleaned = -1.59451e-05 Jy ! Total flux subtracted in 200 components = -1.59451e-05 Jy ! Clean residual min=-0.001732 max=0.001701 Jy/beam ! Clean residual mean=-0.000003 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.129037 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.129037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067739Jy sigma=0.000659 ! Fit after self-cal, rms=0.067739Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067739Jy sigma=0.000659 ! Fit after self-cal, rms=0.067749Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=5.785 mas, bpa=-1.661 degrees ! Estimated noise=674.998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.41078e-05 Jy ! Component: 100 - total flux cleaned = -0.000120026 Jy ! Component: 150 - total flux cleaned = -0.00012925 Jy ! Component: 200 - total flux cleaned = -0.000133396 Jy ! Total flux subtracted in 200 components = -0.000133396 Jy ! Clean residual min=-0.001741 max=0.001704 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.128903 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.128903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067749Jy sigma=0.000658 ! Fit after self-cal, rms=0.067749Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57892e-06 Jy ! Component: 100 - total flux cleaned = -2.77525e-06 Jy ! Component: 150 - total flux cleaned = -6.83405e-06 Jy ! Component: 200 - total flux cleaned = -1.0814e-05 Jy ! Total flux subtracted in 200 components = -1.0814e-05 Jy ! Clean residual min=-0.001743 max=0.001701 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.128892 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.128892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067749Jy sigma=0.000658 ! Fit after self-cal, rms=0.067749Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067749Jy sigma=0.000658 ! Fit after self-cal, rms=0.067745Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.855 mas, bmaj=9.277 mas, bpa=-0.5838 degrees ! Estimated noise=838.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295666 Jy ! Component: 100 - total flux cleaned = -0.000258895 Jy ! Component: 150 - total flux cleaned = -0.000220553 Jy ! Component: 200 - total flux cleaned = -0.00021256 Jy ! Total flux subtracted in 200 components = -0.00021256 Jy ! Clean residual min=-0.001707 max=0.001999 Jy/beam ! Clean residual mean=-0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.12868 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 53 components and 0.12868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067747Jy sigma=0.000659 ! Fit after self-cal, rms=0.067747Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.5663e-05 Jy ! Component: 100 - total flux cleaned = -3.75085e-05 Jy ! Component: 150 - total flux cleaned = -2.07663e-05 Jy ! Component: 200 - total flux cleaned = -1.11958e-05 Jy ! Total flux subtracted in 200 components = -1.11958e-05 Jy ! Clean residual min=-0.001701 max=0.001986 Jy/beam ! Clean residual mean=-0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.128669 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.128669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067748Jy sigma=0.000659 ! Fit after self-cal, rms=0.067749Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=5.786 mas, bpa=-1.67 degrees ! Estimated noise=674.926 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.577 x 5.786 at -1.67 degrees (North through East) ! Clean map min=-0.0017 max=0.12623 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=5.031 mas, bpa=-2.654 degrees ! Estimated noise=1032.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0982448 Jy ! Component: 100 - total flux cleaned = 0.119674 Jy ! Component: 150 - total flux cleaned = 0.125149 Jy ! Component: 200 - total flux cleaned = 0.127052 Jy ! Total flux subtracted in 200 components = 0.127052 Jy ! Clean residual min=-0.003465 max=0.003618 Jy/beam ! Clean residual mean=-0.000000 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.127052 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.127052 Jy ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=5.786 mas, bpa=-1.67 degrees ! Estimated noise=674.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150806 Jy ! Component: 100 - total flux cleaned = 0.00191669 Jy ! Component: 150 - total flux cleaned = 0.00196081 Jy ! Component: 200 - total flux cleaned = 0.00197753 Jy ! Total flux subtracted in 200 components = 0.00197753 Jy ! Clean residual min=-0.001755 max=0.001729 Jy/beam ! Clean residual mean=-0.000003 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.129029 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.129029 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.855 mas, bmaj=9.277 mas, bpa=-0.5838 degrees ! Estimated noise=838.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000531081 Jy ! Component: 100 - total flux cleaned = -0.000488864 Jy ! Component: 150 - total flux cleaned = -0.000456364 Jy ! Component: 200 - total flux cleaned = -0.000431407 Jy ! Total flux subtracted in 200 components = -0.000431407 Jy ! Clean residual min=-0.001712 max=0.001995 Jy/beam ! Clean residual mean=-0.000007 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.128598 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37533e-05 Jy ! Component: 100 - total flux cleaned = 2.55048e-05 Jy ! Component: 150 - total flux cleaned = 3.03787e-05 Jy ! Component: 200 - total flux cleaned = 3.07672e-05 Jy ! Total flux subtracted in 200 components = 3.07672e-05 Jy ! Clean residual min=-0.001702 max=0.001983 Jy/beam ! Clean residual mean=-0.000006 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.128629 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.128629 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=5.786 mas, bpa=-1.67 degrees ! Estimated noise=674.926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268142 Jy ! Component: 100 - total flux cleaned = 0.000182148 Jy ! Component: 150 - total flux cleaned = 0.00015503 Jy ! Component: 200 - total flux cleaned = 0.000154953 Jy ! Total flux subtracted in 200 components = 0.000154953 Jy ! Clean residual min=-0.001764 max=0.001719 Jy/beam ! Clean residual mean=-0.000003 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.128784 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.128784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067758Jy sigma=0.000659 ! Fit after self-cal, rms=0.067755Jy sigma=0.000659 wmodel J0240+4216_S_2017_07_09_pus_map.mod ! Writing 44 model components to file: J0240+4216_S_2017_07_09_pus_map.mod wobs J0240+4216_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0240+4216_S_2017_07_09_pus_uvs.fits wwins J0240+4216_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J0240+4216_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012244 Jy ! Component: 100 - total flux cleaned = 0.000153516 Jy ! Component: 150 - total flux cleaned = 0.000181704 Jy ! Component: 200 - total flux cleaned = 0.000208953 Jy ! Component: 250 - total flux cleaned = 0.000288736 Jy ! Component: 300 - total flux cleaned = 0.000314972 Jy ! Component: 350 - total flux cleaned = 0.000366193 Jy ! Component: 400 - total flux cleaned = 0.000540207 Jy ! Component: 450 - total flux cleaned = 0.000613317 Jy ! Component: 500 - total flux cleaned = 0.00078056 Jy ! Component: 550 - total flux cleaned = 0.000827369 Jy ! Component: 600 - total flux cleaned = 0.00085051 Jy ! Component: 650 - total flux cleaned = 0.000918746 Jy ! Component: 700 - total flux cleaned = 0.00100826 Jy ! Component: 750 - total flux cleaned = 0.00113987 Jy ! Component: 800 - total flux cleaned = 0.00120438 Jy ! Component: 850 - total flux cleaned = 0.00131037 Jy ! Component: 900 - total flux cleaned = 0.00131033 Jy ! Component: 950 - total flux cleaned = 0.00143479 Jy ! Component: 1000 - total flux cleaned = 0.00147543 Jy ! Component: 1050 - total flux cleaned = 0.00161678 Jy ! Component: 1100 - total flux cleaned = 0.00171628 Jy ! Component: 1150 - total flux cleaned = 0.0017948 Jy ! Component: 1200 - total flux cleaned = 0.00185281 Jy ! Component: 1250 - total flux cleaned = 0.00189124 Jy ! Component: 1300 - total flux cleaned = 0.00194827 Jy ! Component: 1350 - total flux cleaned = 0.00207937 Jy ! Component: 1400 - total flux cleaned = 0.00206068 Jy ! Component: 1450 - total flux cleaned = 0.00207885 Jy ! Component: 1500 - total flux cleaned = 0.00216952 Jy ! Component: 1550 - total flux cleaned = 0.00218739 Jy ! Component: 1600 - total flux cleaned = 0.00213423 Jy ! Component: 1650 - total flux cleaned = 0.00215192 Jy ! Component: 1700 - total flux cleaned = 0.00216951 Jy ! Component: 1750 - total flux cleaned = 0.00220422 Jy ! Component: 1800 - total flux cleaned = 0.00222115 Jy ! Component: 1850 - total flux cleaned = 0.00218722 Jy ! Component: 1900 - total flux cleaned = 0.00223786 Jy ! Component: 1950 - total flux cleaned = 0.0022045 Jy ! Component: 2000 - total flux cleaned = 0.00222103 Jy ! Component: 2050 - total flux cleaned = 0.00218846 Jy ! Component: 2100 - total flux cleaned = 0.00228583 Jy ! Component: 2150 - total flux cleaned = 0.00217321 Jy ! Component: 2200 - total flux cleaned = 0.0021733 Jy ! Component: 2250 - total flux cleaned = 0.00215741 Jy ! Component: 2300 - total flux cleaned = 0.00212631 Jy ! Component: 2350 - total flux cleaned = 0.00218872 Jy ! Component: 2400 - total flux cleaned = 0.00220428 Jy ! Component: 2450 - total flux cleaned = 0.0021582 Jy ! Component: 2500 - total flux cleaned = 0.00214295 Jy ! Component: 2550 - total flux cleaned = 0.00215822 Jy ! Component: 2600 - total flux cleaned = 0.00215812 Jy ! Component: 2650 - total flux cleaned = 0.002188 Jy ! Component: 2700 - total flux cleaned = 0.00221743 Jy ! Component: 2750 - total flux cleaned = 0.00223203 Jy ! Component: 2800 - total flux cleaned = 0.0021883 Jy ! Component: 2850 - total flux cleaned = 0.00217385 Jy ! Component: 2900 - total flux cleaned = 0.00214517 Jy ! Component: 2950 - total flux cleaned = 0.00218789 Jy ! Component: 3000 - total flux cleaned = 0.00221612 Jy ! Component: 3050 - total flux cleaned = 0.00220205 Jy ! Component: 3100 - total flux cleaned = 0.00221609 Jy ! Component: 3150 - total flux cleaned = 0.00216076 Jy ! Component: 3200 - total flux cleaned = 0.0021471 Jy ! Component: 3250 - total flux cleaned = 0.00214723 Jy ! Component: 3300 - total flux cleaned = 0.00216072 Jy ! Component: 3350 - total flux cleaned = 0.00214737 Jy ! Component: 3400 - total flux cleaned = 0.00217404 Jy ! Component: 3450 - total flux cleaned = 0.00214752 Jy ! Component: 3500 - total flux cleaned = 0.00213432 Jy ! Component: 3550 - total flux cleaned = 0.00212108 Jy ! Component: 3600 - total flux cleaned = 0.00210799 Jy ! Component: 3650 - total flux cleaned = 0.00208205 Jy ! Component: 3700 - total flux cleaned = 0.00208208 Jy ! Component: 3750 - total flux cleaned = 0.00209496 Jy ! Component: 3800 - total flux cleaned = 0.00204396 Jy ! Component: 3850 - total flux cleaned = 0.00210725 Jy ! Component: 3900 - total flux cleaned = 0.00208203 Jy ! Component: 3950 - total flux cleaned = 0.00208211 Jy ! Component: 4000 - total flux cleaned = 0.00200756 Jy ! Component: 4050 - total flux cleaned = 0.00203234 Jy ! Total flux subtracted in 4096 components = 0.00200788 Jy ! Clean residual min=-0.000648 max=0.000637 Jy/beam ! Clean residual mean=-0.000002 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.130791 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 310 components and 0.130791 Jy ![Exited script file: muppet] wmap "J0240+4216_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.577 x 5.786 at -1.67 degrees (North through East) ! Clean map min=-0.0012018 max=0.12619 Jy/beam ! Writing clean map to FITS file: J0240+4216_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126188 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223059 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.530302 0.530302 1.0606 2.12121 4.24242 8.48484 16.9697 33.9394 67.8787 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.577 x 5.786 at -1.67 degrees (North through East) ! Clean map min=-0.0012018 max=0.12619 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0240+4216_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:40:39 2019