! Started logfile: J0239-0234_S_2017_10_09_pus_uvs.log on Sun May 12 13:03:02 2019 obs J0239-0234_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0239-0234_S_2017_10_09_pus_uva.fits ! AN table 1: 19 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.511696 visibilities/baseline/integration-bin. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0239-0234_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.443580Jy sigma=0.003932 ! Fit after self-cal, rms=0.427262Jy sigma=0.003802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=15.46 mas, bpa=-16.73 degrees ! Estimated noise=3187.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.444177 Jy ! Component: 100 - total flux cleaned = 0.541932 Jy ! Total flux subtracted in 100 components = 0.541932 Jy ! Clean residual min=-0.020013 max=0.031565 Jy/beam ! Clean residual mean=0.000009 rms=0.005988 Jy/beam ! Combined flux in latest and established models = 0.541932 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.541932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124737Jy sigma=0.000950 ! Fit after self-cal, rms=0.124736Jy sigma=0.000950 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=18.31 mas, bpa=-17.05 degrees ! Estimated noise=2761.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406698 Jy ! Component: 100 - total flux cleaned = 0.0604956 Jy ! Component: 150 - total flux cleaned = 0.0732218 Jy ! Component: 200 - total flux cleaned = 0.082279 Jy ! Total flux subtracted in 200 components = 0.082279 Jy ! Clean residual min=-0.013448 max=0.016240 Jy/beam ! Clean residual mean=0.000010 rms=0.003565 Jy/beam ! Combined flux in latest and established models = 0.62421 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 66 components and 0.62421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108029Jy sigma=0.000839 ! Fit after self-cal, rms=0.108005Jy sigma=0.000839 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.98 KP 1.07 ! LA 1.03 MK 0.97 NL 0.91 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.02 KP 1.01 ! LA 0.99 MK 0.98 NL 1.07 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.99 KP 0.90 ! LA 0.78 MK 1.01 NL 1.19 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.96 KP 1.00* ! LA 1.00* MK 1.30 NL 1.00* OV 1.00* ! PT 1.11 ! ! ! Fit before self-cal, rms=0.108005Jy sigma=0.000839 ! Fit after self-cal, rms=0.080090Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=18.23 mas, bpa=-17 degrees ! Estimated noise=2770.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195475 Jy ! Component: 100 - total flux cleaned = -0.00196519 Jy ! Component: 150 - total flux cleaned = -0.00177479 Jy ! Component: 200 - total flux cleaned = -0.00161239 Jy ! Total flux subtracted in 200 components = -0.00161239 Jy ! Clean residual min=-0.006658 max=0.006392 Jy/beam ! Clean residual mean=-0.000003 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 0.622598 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.622598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079906Jy sigma=0.000659 ! Fit after self-cal, rms=0.079875Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079875Jy sigma=0.000659 ! Fit after self-cal, rms=0.078374Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=18.26 mas, bpa=-16.98 degrees ! Estimated noise=2771.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122909 Jy ! Component: 100 - total flux cleaned = -0.00106673 Jy ! Component: 150 - total flux cleaned = -0.000975301 Jy ! Component: 200 - total flux cleaned = -0.000892182 Jy ! Total flux subtracted in 200 components = -0.000892182 Jy ! Clean residual min=-0.005949 max=0.005935 Jy/beam ! Clean residual mean=-0.000004 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.621706 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.621706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078293Jy sigma=0.000644 ! Fit after self-cal, rms=0.078299Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313557 Jy ! Component: 100 - total flux cleaned = 0.000424246 Jy ! Component: 150 - total flux cleaned = 0.00045692 Jy ! Component: 200 - total flux cleaned = 0.000520637 Jy ! Total flux subtracted in 200 components = 0.000520637 Jy ! Clean residual min=-0.005921 max=0.005943 Jy/beam ! Clean residual mean=-0.000004 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.622226 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.622226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078265Jy sigma=0.000643 ! Fit after self-cal, rms=0.078266Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078266Jy sigma=0.000643 ! Fit after self-cal, rms=0.078310Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=18.26 mas, bpa=-16.97 degrees ! Estimated noise=2772.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433835 Jy ! Component: 100 - total flux cleaned = -0.000472044 Jy ! Component: 150 - total flux cleaned = -0.00040999 Jy ! Component: 200 - total flux cleaned = -0.000350321 Jy ! Total flux subtracted in 200 components = -0.000350321 Jy ! Clean residual min=-0.005917 max=0.006049 Jy/beam ! Clean residual mean=-0.000003 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 0.621876 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.621876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078275Jy sigma=0.000643 ! Fit after self-cal, rms=0.078278Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163038 Jy ! Component: 100 - total flux cleaned = 0.000276689 Jy ! Component: 150 - total flux cleaned = 0.000327949 Jy ! Component: 200 - total flux cleaned = 0.000352445 Jy ! Total flux subtracted in 200 components = 0.000352445 Jy ! Clean residual min=-0.005896 max=0.006044 Jy/beam ! Clean residual mean=-0.000004 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.622228 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 105 components and 0.622228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078258Jy sigma=0.000643 ! Fit after self-cal, rms=0.078259Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078259Jy sigma=0.000643 ! Fit after self-cal, rms=0.078274Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.046 mas, bmaj=18.16 mas, bpa=-17.63 degrees ! Estimated noise=3354.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392542 Jy ! Component: 100 - total flux cleaned = 0.00036476 Jy ! Component: 150 - total flux cleaned = 0.000363857 Jy ! Component: 200 - total flux cleaned = 0.000363513 Jy ! Total flux subtracted in 200 components = 0.000363513 Jy ! Clean residual min=-0.005926 max=0.006765 Jy/beam ! Clean residual mean=-0.000004 rms=0.001939 Jy/beam ! Combined flux in latest and established models = 0.622592 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 112 components and 0.622592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078279Jy sigma=0.000643 ! Fit after self-cal, rms=0.078276Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50553e-06 Jy ! Component: 100 - total flux cleaned = 8.92987e-06 Jy ! Component: 150 - total flux cleaned = 5.23094e-05 Jy ! Component: 200 - total flux cleaned = 9.36867e-05 Jy ! Total flux subtracted in 200 components = 9.36867e-05 Jy ! Clean residual min=-0.005954 max=0.006765 Jy/beam ! Clean residual mean=-0.000004 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.622685 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.622686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078280Jy sigma=0.000643 ! Fit after self-cal, rms=0.078279Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=18.26 mas, bpa=-16.97 degrees ! Estimated noise=2772.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 18.26 at -16.97 degrees (North through East) ! Clean map min=-0.0058299 max=0.57238 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078279Jy sigma=0.000643 ! Fit after self-cal, rms=0.069306Jy sigma=0.000562 ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=18.27 mas, bpa=-16.97 degrees ! Estimated noise=2774.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000692126 Jy ! Component: 100 - total flux cleaned = 0.00084736 Jy ! Component: 150 - total flux cleaned = 0.000877472 Jy ! Component: 200 - total flux cleaned = 0.000901407 Jy ! Total flux subtracted in 200 components = 0.000901407 Jy ! Clean residual min=-0.005635 max=0.006007 Jy/beam ! Clean residual mean=-0.000004 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.623587 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 122 components and 0.623587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069263Jy sigma=0.000562 ! Fit after self-cal, rms=0.069263Jy sigma=0.000562 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135251 Jy ! Component: 100 - total flux cleaned = 0.00017938 Jy ! Component: 150 - total flux cleaned = 0.000261406 Jy ! Component: 200 - total flux cleaned = 0.000338197 Jy ! Total flux subtracted in 200 components = 0.000338197 Jy ! Clean residual min=-0.005659 max=0.005996 Jy/beam ! Clean residual mean=-0.000005 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.623925 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 0.623925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069245Jy sigma=0.000561 ! Fit after self-cal, rms=0.069246Jy sigma=0.000561 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069246Jy sigma=0.000561 ! Fit after self-cal, rms=0.069241Jy sigma=0.000561 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=15.52 mas, bpa=-16.66 degrees ! Estimated noise=3207.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.443821 Jy ! Component: 100 - total flux cleaned = 0.540767 Jy ! Component: 150 - total flux cleaned = 0.56952 Jy ! Component: 200 - total flux cleaned = 0.582629 Jy ! Total flux subtracted in 200 components = 0.582629 Jy ! Clean residual min=-0.008873 max=0.007316 Jy/beam ! Clean residual mean=-0.000000 rms=0.002342 Jy/beam ! Combined flux in latest and established models = 0.582629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.582629 Jy ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=18.26 mas, bpa=-16.97 degrees ! Estimated noise=2773.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130266 Jy ! Component: 100 - total flux cleaned = 0.0214723 Jy ! Component: 150 - total flux cleaned = 0.0274154 Jy ! Component: 200 - total flux cleaned = 0.0317626 Jy ! Total flux subtracted in 200 components = 0.0317626 Jy ! Clean residual min=-0.006472 max=0.006029 Jy/beam ! Clean residual mean=-0.000004 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.614391 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 105 components and 0.614391 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.042 mas, bmaj=18.15 mas, bpa=-17.63 degrees ! Estimated noise=3354.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499459 Jy ! Component: 100 - total flux cleaned = 0.00753455 Jy ! Component: 150 - total flux cleaned = 0.00835771 Jy ! Component: 200 - total flux cleaned = 0.00898779 Jy ! Total flux subtracted in 200 components = 0.00898779 Jy ! Clean residual min=-0.006008 max=0.006750 Jy/beam ! Clean residual mean=-0.000006 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.623379 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000488627 Jy ! Component: 100 - total flux cleaned = 0.000836952 Jy ! Component: 150 - total flux cleaned = 0.00106057 Jy ! Component: 200 - total flux cleaned = 0.00111606 Jy ! Total flux subtracted in 200 components = 0.00111606 Jy ! Clean residual min=-0.005816 max=0.006852 Jy/beam ! Clean residual mean=-0.000006 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.624495 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 146 components and 0.624495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=18.26 mas, bpa=-16.97 degrees ! Estimated noise=2773.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000322633 Jy ! Component: 100 - total flux cleaned = -0.0003254 Jy ! Component: 150 - total flux cleaned = -0.000265013 Jy ! Component: 200 - total flux cleaned = -0.000218368 Jy ! Total flux subtracted in 200 components = -0.000218368 Jy ! Clean residual min=-0.005697 max=0.006460 Jy/beam ! Clean residual mean=-0.000005 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.624277 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 164 components and 0.624277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069278Jy sigma=0.000562 ! Fit after self-cal, rms=0.069279Jy sigma=0.000562 wmodel J0239-0234_S_2017_10_09_pus_map.mod ! Writing 164 model components to file: J0239-0234_S_2017_10_09_pus_map.mod wobs J0239-0234_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0239-0234_S_2017_10_09_pus_uvs.fits wwins J0239-0234_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0239-0234_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879763 Jy ! Component: 100 - total flux cleaned = 0.000109825 Jy ! Component: 150 - total flux cleaned = -0.0010243 Jy ! Component: 200 - total flux cleaned = -0.00175684 Jy ! Component: 250 - total flux cleaned = -0.00229105 Jy ! Component: 300 - total flux cleaned = -0.00257952 Jy ! Component: 350 - total flux cleaned = -0.00279002 Jy ! Component: 400 - total flux cleaned = -0.00312781 Jy ! Component: 450 - total flux cleaned = -0.00332276 Jy ! Component: 500 - total flux cleaned = -0.00363452 Jy ! Component: 550 - total flux cleaned = -0.00387397 Jy ! Component: 600 - total flux cleaned = -0.00427715 Jy ! Component: 650 - total flux cleaned = -0.00444466 Jy ! Component: 700 - total flux cleaned = -0.00455232 Jy ! Component: 750 - total flux cleaned = -0.00470957 Jy ! Component: 800 - total flux cleaned = -0.00476143 Jy ! Component: 850 - total flux cleaned = -0.00481031 Jy ! Component: 900 - total flux cleaned = -0.00490505 Jy ! Component: 950 - total flux cleaned = -0.00485825 Jy ! Component: 1000 - total flux cleaned = -0.00508868 Jy ! Component: 1050 - total flux cleaned = -0.00535552 Jy ! Component: 1100 - total flux cleaned = -0.00535421 Jy ! Component: 1150 - total flux cleaned = -0.00539651 Jy ! Component: 1200 - total flux cleaned = -0.00556364 Jy ! Component: 1250 - total flux cleaned = -0.00556287 Jy ! Component: 1300 - total flux cleaned = -0.00556249 Jy ! Component: 1350 - total flux cleaned = -0.00572251 Jy ! Component: 1400 - total flux cleaned = -0.00584015 Jy ! Component: 1450 - total flux cleaned = -0.00591701 Jy ! Component: 1500 - total flux cleaned = -0.00591692 Jy ! Component: 1550 - total flux cleaned = -0.00602723 Jy ! Component: 1600 - total flux cleaned = -0.00595326 Jy ! Component: 1650 - total flux cleaned = -0.00591743 Jy ! Component: 1700 - total flux cleaned = -0.00598896 Jy ! Component: 1750 - total flux cleaned = -0.00602382 Jy ! Component: 1800 - total flux cleaned = -0.00595545 Jy ! Component: 1850 - total flux cleaned = -0.00592164 Jy ! Component: 1900 - total flux cleaned = -0.00582227 Jy ! Component: 1950 - total flux cleaned = -0.00575745 Jy ! Component: 2000 - total flux cleaned = -0.00585538 Jy ! Component: 2050 - total flux cleaned = -0.00582326 Jy ! Component: 2100 - total flux cleaned = -0.00572841 Jy ! Component: 2150 - total flux cleaned = -0.00560426 Jy ! Component: 2200 - total flux cleaned = -0.00569649 Jy ! Component: 2250 - total flux cleaned = -0.00551392 Jy ! Component: 2300 - total flux cleaned = -0.00536422 Jy ! Component: 2350 - total flux cleaned = -0.00521671 Jy ! Component: 2400 - total flux cleaned = -0.00515769 Jy ! Component: 2450 - total flux cleaned = -0.00504167 Jy ! Component: 2500 - total flux cleaned = -0.0048693 Jy ! Component: 2550 - total flux cleaned = -0.00478392 Jy ! Component: 2600 - total flux cleaned = -0.00467132 Jy ! Component: 2650 - total flux cleaned = -0.00467116 Jy ! Component: 2700 - total flux cleaned = -0.0045606 Jy ! Component: 2750 - total flux cleaned = -0.0045335 Jy ! Component: 2800 - total flux cleaned = -0.00456068 Jy ! Component: 2850 - total flux cleaned = -0.00447958 Jy ! Component: 2900 - total flux cleaned = -0.00442595 Jy ! Component: 2950 - total flux cleaned = -0.00434621 Jy ! Component: 3000 - total flux cleaned = -0.00442555 Jy ! Component: 3050 - total flux cleaned = -0.00429401 Jy ! Component: 3100 - total flux cleaned = -0.00426805 Jy ! Component: 3150 - total flux cleaned = -0.0041899 Jy ! Component: 3200 - total flux cleaned = -0.00411265 Jy ! Component: 3250 - total flux cleaned = -0.00403565 Jy ! Component: 3300 - total flux cleaned = -0.00398442 Jy ! Component: 3350 - total flux cleaned = -0.00395916 Jy ! Component: 3400 - total flux cleaned = -0.0039592 Jy ! Component: 3450 - total flux cleaned = -0.00388378 Jy ! Component: 3500 - total flux cleaned = -0.00388372 Jy ! Component: 3550 - total flux cleaned = -0.00370993 Jy ! Component: 3600 - total flux cleaned = -0.00368548 Jy ! Component: 3650 - total flux cleaned = -0.00363624 Jy ! Component: 3700 - total flux cleaned = -0.00358707 Jy ! Component: 3750 - total flux cleaned = -0.00353836 Jy ! Component: 3800 - total flux cleaned = -0.00356273 Jy ! Component: 3850 - total flux cleaned = -0.00351407 Jy ! Component: 3900 - total flux cleaned = -0.00348997 Jy ! Component: 3950 - total flux cleaned = -0.00358621 Jy ! Component: 4000 - total flux cleaned = -0.00375438 Jy ! Component: 4050 - total flux cleaned = -0.00382629 Jy ! Total flux subtracted in 4096 components = -0.00394592 Jy ! Clean residual min=-0.001371 max=0.001291 Jy/beam ! Clean residual mean=-0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.620331 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 461 components and 0.620331 Jy ![Exited script file: muppet] wmap "J0239-0234_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.343 x 18.26 at -16.97 degrees (North through East) ! Clean map min=-0.0038738 max=0.57321 Jy/beam ! Writing clean map to FITS file: J0239-0234_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.573206 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000419261 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.21943 0.21943 0.438859 0.877719 1.75544 3.51087 7.02175 14.0435 28.087 56.174 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.573 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.343 x 18.26 at -16.97 degrees (North through East) ! Clean map min=-0.0038738 max=0.57321 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0239-0234_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:03:07 2019