! Started logfile: J0239-0234_S_2017_05_27_pus_uvs.log on Fri May 3 10:55:40 2019 obs J0239-0234_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0239-0234_S_2017_05_27_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.324183 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0239-0234_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.469327Jy sigma=0.003758 ! Fit after self-cal, rms=0.463032Jy sigma=0.003730 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=7.648 mas, bpa=-5.875 degrees ! Estimated noise=3809.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.422116 Jy ! Component: 100 - total flux cleaned = 0.514173 Jy ! Total flux subtracted in 100 components = 0.514173 Jy ! Clean residual min=-0.016403 max=0.025715 Jy/beam ! Clean residual mean=0.000024 rms=0.004932 Jy/beam ! Combined flux in latest and established models = 0.514173 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.514173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103169Jy sigma=0.000792 ! Fit after self-cal, rms=0.103166Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=8.57 mas, bpa=-4.441 degrees ! Estimated noise=3191.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0300716 Jy ! Component: 100 - total flux cleaned = 0.0432581 Jy ! Component: 150 - total flux cleaned = 0.0498511 Jy ! Component: 200 - total flux cleaned = 0.0518526 Jy ! Total flux subtracted in 200 components = 0.0518526 Jy ! Clean residual min=-0.017006 max=0.012270 Jy/beam ! Clean residual mean=-0.000066 rms=0.003452 Jy/beam ! Combined flux in latest and established models = 0.566025 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 27 components and 0.566025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094545Jy sigma=0.000729 ! Fit after self-cal, rms=0.094539Jy sigma=0.000729 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.97 KP 1.03 ! LA 1.00 MK 0.99 NL 0.88 OV 1.00 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.05 KP 0.98 ! LA 0.97 MK 0.99 NL 1.04 OV 1.07 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.02 KP 1.01 ! LA 1.02 MK 1.01 NL 1.02 OV 0.98 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.96 KP 1.00* ! LA 1.08 MK 1.06 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.094539Jy sigma=0.000729 ! Fit after self-cal, rms=0.085466Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=8.578 mas, bpa=-4.385 degrees ! Estimated noise=3187.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110515 Jy ! Component: 100 - total flux cleaned = 0.000940175 Jy ! Component: 150 - total flux cleaned = 0.000939116 Jy ! Component: 200 - total flux cleaned = 0.000895114 Jy ! Total flux subtracted in 200 components = 0.000895114 Jy ! Clean residual min=-0.007188 max=0.006073 Jy/beam ! Clean residual mean=-0.000014 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.56692 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.56692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085357Jy sigma=0.000662 ! Fit after self-cal, rms=0.085351Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085351Jy sigma=0.000662 ! Fit after self-cal, rms=0.085319Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.576 mas, bpa=-4.393 degrees ! Estimated noise=3187.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507425 Jy ! Component: 100 - total flux cleaned = 0.000470927 Jy ! Component: 150 - total flux cleaned = 0.000469995 Jy ! Component: 200 - total flux cleaned = 0.000468064 Jy ! Total flux subtracted in 200 components = 0.000468064 Jy ! Clean residual min=-0.007183 max=0.006204 Jy/beam ! Clean residual mean=-0.000015 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.567388 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.567388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085278Jy sigma=0.000662 ! Fit after self-cal, rms=0.085275Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.23571e-05 Jy ! Component: 100 - total flux cleaned = -4.18113e-05 Jy ! Component: 150 - total flux cleaned = -4.42173e-05 Jy ! Component: 200 - total flux cleaned = -4.35126e-05 Jy ! Total flux subtracted in 200 components = -4.35126e-05 Jy ! Clean residual min=-0.007202 max=0.006244 Jy/beam ! Clean residual mean=-0.000014 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.567345 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.567345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085253Jy sigma=0.000662 ! Fit after self-cal, rms=0.085253Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085253Jy sigma=0.000662 ! Fit after self-cal, rms=0.085228Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=8.575 mas, bpa=-4.402 degrees ! Estimated noise=3186.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135968 Jy ! Component: 100 - total flux cleaned = 0.000136883 Jy ! Component: 150 - total flux cleaned = 0.000136541 Jy ! Component: 200 - total flux cleaned = 0.000136693 Jy ! Total flux subtracted in 200 components = 0.000136693 Jy ! Clean residual min=-0.007212 max=0.006277 Jy/beam ! Clean residual mean=-0.000014 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.567482 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.567482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085214Jy sigma=0.000661 ! Fit after self-cal, rms=0.085214Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.20297e-05 Jy ! Component: 100 - total flux cleaned = 2.17153e-05 Jy ! Component: 150 - total flux cleaned = 2.07049e-05 Jy ! Component: 200 - total flux cleaned = 1.97892e-05 Jy ! Total flux subtracted in 200 components = 1.97892e-05 Jy ! Clean residual min=-0.007221 max=0.006284 Jy/beam ! Clean residual mean=-0.000014 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.567501 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.567501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085203Jy sigma=0.000661 ! Fit after self-cal, rms=0.085204Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085204Jy sigma=0.000661 ! Fit after self-cal, rms=0.085186Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.766 mas, bmaj=16.1 mas, bpa=-5.305 degrees ! Estimated noise=3977.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000407758 Jy ! Component: 100 - total flux cleaned = -0.000367514 Jy ! Component: 150 - total flux cleaned = -0.000348293 Jy ! Component: 200 - total flux cleaned = -0.000311436 Jy ! Total flux subtracted in 200 components = -0.000311436 Jy ! Clean residual min=-0.007016 max=0.006982 Jy/beam ! Clean residual mean=-0.000028 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.56719 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.56719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085186Jy sigma=0.000661 ! Fit after self-cal, rms=0.085184Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.31769e-06 Jy ! Component: 100 - total flux cleaned = 3.00863e-05 Jy ! Component: 150 - total flux cleaned = 8.04702e-05 Jy ! Component: 200 - total flux cleaned = 9.66697e-05 Jy ! Total flux subtracted in 200 components = 9.66697e-05 Jy ! Clean residual min=-0.006982 max=0.006939 Jy/beam ! Clean residual mean=-0.000029 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.567286 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 58 components and 0.567286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085187Jy sigma=0.000661 ! Fit after self-cal, rms=0.085186Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=8.576 mas, bpa=-4.409 degrees ! Estimated noise=3185.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.037 x 8.576 at -4.409 degrees (North through East) ! Clean map min=-0.0068851 max=0.54296 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085186Jy sigma=0.000661 ! Fit after self-cal, rms=0.077836Jy sigma=0.000602 ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=8.578 mas, bpa=-4.431 degrees ! Estimated noise=3182.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218949 Jy ! Component: 100 - total flux cleaned = -0.000193198 Jy ! Component: 150 - total flux cleaned = -0.00019264 Jy ! Component: 200 - total flux cleaned = -0.000214304 Jy ! Total flux subtracted in 200 components = -0.000214304 Jy ! Clean residual min=-0.006848 max=0.006022 Jy/beam ! Clean residual mean=-0.000015 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 0.567072 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.567072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077822Jy sigma=0.000602 ! Fit after self-cal, rms=0.077822Jy sigma=0.000602 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64796e-06 Jy ! Component: 100 - total flux cleaned = 1.99236e-06 Jy ! Component: 150 - total flux cleaned = 2.54524e-06 Jy ! Component: 200 - total flux cleaned = 2.1677e-05 Jy ! Total flux subtracted in 200 components = 2.1677e-05 Jy ! Clean residual min=-0.006834 max=0.006025 Jy/beam ! Clean residual mean=-0.000015 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.567094 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.567094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077813Jy sigma=0.000602 ! Fit after self-cal, rms=0.077813Jy sigma=0.000602 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077813Jy sigma=0.000602 ! Fit after self-cal, rms=0.077802Jy sigma=0.000602 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=7.681 mas, bpa=-5.965 degrees ! Estimated noise=3805.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.420452 Jy ! Component: 100 - total flux cleaned = 0.51214 Jy ! Component: 150 - total flux cleaned = 0.53851 Jy ! Component: 200 - total flux cleaned = 0.551521 Jy ! Total flux subtracted in 200 components = 0.551521 Jy ! Clean residual min=-0.009495 max=0.007981 Jy/beam ! Clean residual mean=0.000009 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 0.551521 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.551521 Jy ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.579 mas, bpa=-4.433 degrees ! Estimated noise=3182.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083 Jy ! Component: 100 - total flux cleaned = 0.0125033 Jy ! Component: 150 - total flux cleaned = 0.0146555 Jy ! Component: 200 - total flux cleaned = 0.0150931 Jy ! Total flux subtracted in 200 components = 0.0150931 Jy ! Clean residual min=-0.007177 max=0.005951 Jy/beam ! Clean residual mean=-0.000014 rms=0.001723 Jy/beam ! Combined flux in latest and established models = 0.566614 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.566614 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.767 mas, bmaj=16.11 mas, bpa=-5.337 degrees ! Estimated noise=3971.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313322 Jy ! Component: 100 - total flux cleaned = -0.000267743 Jy ! Component: 150 - total flux cleaned = -0.000245808 Jy ! Component: 200 - total flux cleaned = -0.000225221 Jy ! Total flux subtracted in 200 components = -0.000225221 Jy ! Clean residual min=-0.006792 max=0.006731 Jy/beam ! Clean residual mean=-0.000027 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.566389 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.94491e-06 Jy ! Component: 100 - total flux cleaned = 2.16105e-05 Jy ! Component: 150 - total flux cleaned = 2.26798e-05 Jy ! Component: 200 - total flux cleaned = 2.22594e-05 Jy ! Total flux subtracted in 200 components = 2.22594e-05 Jy ! Clean residual min=-0.006766 max=0.006694 Jy/beam ! Clean residual mean=-0.000027 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.566411 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.566411 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.579 mas, bpa=-4.433 degrees ! Estimated noise=3182.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336904 Jy ! Component: 100 - total flux cleaned = 0.000190475 Jy ! Component: 150 - total flux cleaned = 0.000190419 Jy ! Component: 200 - total flux cleaned = 0.000231529 Jy ! Total flux subtracted in 200 components = 0.000231529 Jy ! Clean residual min=-0.007014 max=0.006015 Jy/beam ! Clean residual mean=-0.000014 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.566642 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.566643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077889Jy sigma=0.000602 ! Fit after self-cal, rms=0.077883Jy sigma=0.000602 wmodel J0239-0234_S_2017_05_27_pus_map.mod ! Writing 45 model components to file: J0239-0234_S_2017_05_27_pus_map.mod wobs J0239-0234_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0239-0234_S_2017_05_27_pus_uvs.fits wwins J0239-0234_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0239-0234_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00304776 Jy ! Component: 100 - total flux cleaned = -0.00503997 Jy ! Component: 150 - total flux cleaned = -0.00646383 Jy ! Component: 200 - total flux cleaned = -0.00750521 Jy ! Component: 250 - total flux cleaned = -0.00858361 Jy ! Component: 300 - total flux cleaned = -0.00943948 Jy ! Component: 350 - total flux cleaned = -0.0100942 Jy ! Component: 400 - total flux cleaned = -0.0104091 Jy ! Component: 450 - total flux cleaned = -0.0107857 Jy ! Component: 500 - total flux cleaned = -0.0111507 Jy ! Component: 550 - total flux cleaned = -0.0115754 Jy ! Component: 600 - total flux cleaned = -0.0122567 Jy ! Component: 650 - total flux cleaned = -0.0128459 Jy ! Component: 700 - total flux cleaned = -0.0131 Jy ! Component: 750 - total flux cleaned = -0.0136562 Jy ! Component: 800 - total flux cleaned = -0.0140161 Jy ! Component: 850 - total flux cleaned = -0.0143069 Jy ! Component: 900 - total flux cleaned = -0.0145333 Jy ! Component: 950 - total flux cleaned = -0.0150302 Jy ! Component: 1000 - total flux cleaned = -0.0151909 Jy ! Component: 1050 - total flux cleaned = -0.0154541 Jy ! Component: 1100 - total flux cleaned = -0.0157104 Jy ! Component: 1150 - total flux cleaned = -0.01596 Jy ! Component: 1200 - total flux cleaned = -0.0160582 Jy ! Component: 1250 - total flux cleaned = -0.0162011 Jy ! Component: 1300 - total flux cleaned = -0.0162022 Jy ! Component: 1350 - total flux cleaned = -0.0163387 Jy ! Component: 1400 - total flux cleaned = -0.0162941 Jy ! Component: 1450 - total flux cleaned = -0.0162938 Jy ! Component: 1500 - total flux cleaned = -0.0161222 Jy ! Component: 1550 - total flux cleaned = -0.016079 Jy ! Component: 1600 - total flux cleaned = -0.016037 Jy ! Component: 1650 - total flux cleaned = -0.0160366 Jy ! Component: 1700 - total flux cleaned = -0.015996 Jy ! Component: 1750 - total flux cleaned = -0.0159566 Jy ! Component: 1800 - total flux cleaned = -0.0161111 Jy ! Component: 1850 - total flux cleaned = -0.0160722 Jy ! Component: 1900 - total flux cleaned = -0.0161469 Jy ! Component: 1950 - total flux cleaned = -0.016036 Jy ! Component: 2000 - total flux cleaned = -0.0161088 Jy ! Component: 2050 - total flux cleaned = -0.016109 Jy ! Component: 2100 - total flux cleaned = -0.0161802 Jy ! Component: 2150 - total flux cleaned = -0.0161449 Jy ! Component: 2200 - total flux cleaned = -0.0162492 Jy ! Component: 2250 - total flux cleaned = -0.016387 Jy ! Component: 2300 - total flux cleaned = -0.0165911 Jy ! Component: 2350 - total flux cleaned = -0.0166922 Jy ! Component: 2400 - total flux cleaned = -0.0168929 Jy ! Component: 2450 - total flux cleaned = -0.0170585 Jy ! Component: 2500 - total flux cleaned = -0.0172887 Jy ! Component: 2550 - total flux cleaned = -0.017582 Jy ! Component: 2600 - total flux cleaned = -0.0176788 Jy ! Component: 2650 - total flux cleaned = -0.0178069 Jy ! Component: 2700 - total flux cleaned = -0.0179342 Jy ! Component: 2750 - total flux cleaned = -0.0179976 Jy ! Component: 2800 - total flux cleaned = -0.0181861 Jy ! Component: 2850 - total flux cleaned = -0.0184044 Jy ! Component: 2900 - total flux cleaned = -0.0185902 Jy ! Component: 2950 - total flux cleaned = -0.0187134 Jy ! Component: 3000 - total flux cleaned = -0.0188664 Jy ! Component: 3050 - total flux cleaned = -0.0190487 Jy ! Component: 3100 - total flux cleaned = -0.0193208 Jy ! Component: 3150 - total flux cleaned = -0.0194413 Jy ! Component: 3200 - total flux cleaned = -0.0197705 Jy ! Component: 3250 - total flux cleaned = -0.019949 Jy ! Component: 3300 - total flux cleaned = -0.0200677 Jy ! Component: 3350 - total flux cleaned = -0.0203042 Jy ! Component: 3400 - total flux cleaned = -0.0204514 Jy ! Component: 3450 - total flux cleaned = -0.0206275 Jy ! Component: 3500 - total flux cleaned = -0.0207737 Jy ! Component: 3550 - total flux cleaned = -0.0209195 Jy ! Component: 3600 - total flux cleaned = -0.0210358 Jy ! Component: 3650 - total flux cleaned = -0.0212097 Jy ! Component: 3700 - total flux cleaned = -0.0213833 Jy ! Component: 3750 - total flux cleaned = -0.0214986 Jy ! Component: 3800 - total flux cleaned = -0.0216714 Jy ! Component: 3850 - total flux cleaned = -0.0218729 Jy ! Component: 3900 - total flux cleaned = -0.0221028 Jy ! Component: 3950 - total flux cleaned = -0.0222462 Jy ! Component: 4000 - total flux cleaned = -0.0224756 Jy ! Component: 4050 - total flux cleaned = -0.0226189 Jy ! Total flux subtracted in 4096 components = -0.0227048 Jy ! Clean residual min=-0.001604 max=0.001589 Jy/beam ! Clean residual mean=-0.000010 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.543938 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 298 components and 0.543938 Jy ![Exited script file: muppet] wmap "J0239-0234_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.579 at -4.433 degrees (North through East) ! Clean map min=-0.0058017 max=0.54105 Jy/beam ! Writing clean map to FITS file: J0239-0234_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.541055 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000444318 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.246362 0.246362 0.492725 0.985449 1.9709 3.9418 7.88359 15.7672 31.5344 63.0687 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.541 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 8.579 at -4.433 degrees (North through East) ! Clean map min=-0.0058017 max=0.54105 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0239-0234_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:55:44 2019