! Started logfile: J0239-0234_S_2017_02_19_pus_uvs.log on Sat May 4 18:40:07 2019 obs J0239-0234_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0239-0234_S_2017_02_19_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.5875 visibilities/baseline/integration-bin. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0239-0234_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.587377Jy sigma=0.004770 ! Fit after self-cal, rms=0.583548Jy sigma=0.004743 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=7.746 mas, bpa=-10.13 degrees ! Estimated noise=2748.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.318666 Jy ! Component: 100 - total flux cleaned = 0.399006 Jy ! Total flux subtracted in 100 components = 0.399006 Jy ! Clean residual min=-0.032684 max=0.045144 Jy/beam ! Clean residual mean=0.000035 rms=0.009537 Jy/beam ! Combined flux in latest and established models = 0.399006 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.399006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163580Jy sigma=0.001192 ! Fit after self-cal, rms=0.163563Jy sigma=0.001192 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=7.803 mas, bpa=-8.314 degrees ! Estimated noise=2418.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401282 Jy ! Component: 100 - total flux cleaned = 0.0555839 Jy ! Component: 150 - total flux cleaned = 0.0566427 Jy ! Component: 200 - total flux cleaned = 0.0561658 Jy ! Total flux subtracted in 200 components = 0.0561658 Jy ! Clean residual min=-0.020715 max=0.039607 Jy/beam ! Clean residual mean=0.000035 rms=0.007427 Jy/beam ! Combined flux in latest and established models = 0.455172 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.455172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151931Jy sigma=0.001140 ! Fit after self-cal, rms=0.151921Jy sigma=0.001140 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 1.51 KP 1.07 ! LA 0.98 MK 0.83 NL 0.83 OV 1.04 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.41 KP 1.01 ! LA 0.94 MK 1.21 NL 1.00 OV 1.04 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.98 HN 1.37 KP 0.86 ! LA 0.73 MK 1.00 NL 1.16 OV 0.91 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.44 KP 1.00* ! LA 0.83 MK 1.02 NL 1.00* OV 0.94 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.151921Jy sigma=0.001140 ! Fit after self-cal, rms=0.143694Jy sigma=0.000956 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=7.808 mas, bpa=-7.681 degrees ! Estimated noise=2420.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149342 Jy ! Component: 100 - total flux cleaned = -0.0193222 Jy ! Component: 150 - total flux cleaned = -0.0210518 Jy ! Component: 200 - total flux cleaned = -0.0223041 Jy ! Total flux subtracted in 200 components = -0.0223041 Jy ! Clean residual min=-0.027243 max=0.022720 Jy/beam ! Clean residual mean=0.000015 rms=0.005579 Jy/beam ! Combined flux in latest and established models = 0.432868 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.432868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140622Jy sigma=0.000944 ! Fit after self-cal, rms=0.140667Jy sigma=0.000943 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140667Jy sigma=0.000943 ! Fit after self-cal, rms=0.114997Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=7.85 mas, bpa=-7.784 degrees ! Estimated noise=2402.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00508721 Jy ! Component: 100 - total flux cleaned = 0.0056148 Jy ! Component: 150 - total flux cleaned = 0.00589291 Jy ! Component: 200 - total flux cleaned = 0.00636125 Jy ! Total flux subtracted in 200 components = 0.00636125 Jy ! Clean residual min=-0.008306 max=0.006951 Jy/beam ! Clean residual mean=0.000014 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.439229 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.439229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114412Jy sigma=0.000668 ! Fit after self-cal, rms=0.114724Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000915032 Jy ! Component: 100 - total flux cleaned = 0.0010875 Jy ! Component: 150 - total flux cleaned = 0.00154694 Jy ! Component: 200 - total flux cleaned = 0.00195588 Jy ! Total flux subtracted in 200 components = 0.00195588 Jy ! Clean residual min=-0.008178 max=0.006474 Jy/beam ! Clean residual mean=0.000015 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 0.441185 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.441185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114589Jy sigma=0.000666 ! Fit after self-cal, rms=0.114572Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114572Jy sigma=0.000666 ! Fit after self-cal, rms=0.114723Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=7.84 mas, bpa=-7.738 degrees ! Estimated noise=2400.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001667 Jy ! Component: 100 - total flux cleaned = 0.00231793 Jy ! Component: 150 - total flux cleaned = 0.00274939 Jy ! Component: 200 - total flux cleaned = 0.00307891 Jy ! Total flux subtracted in 200 components = 0.00307891 Jy ! Clean residual min=-0.007934 max=0.006234 Jy/beam ! Clean residual mean=0.000013 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.444264 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.444264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114608Jy sigma=0.000664 ! Fit after self-cal, rms=0.114604Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626212 Jy ! Component: 100 - total flux cleaned = 0.000794266 Jy ! Component: 150 - total flux cleaned = 0.000948431 Jy ! Component: 200 - total flux cleaned = 0.0011373 Jy ! Total flux subtracted in 200 components = 0.0011373 Jy ! Clean residual min=-0.007910 max=0.006000 Jy/beam ! Clean residual mean=0.000013 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.445401 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.445401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114550Jy sigma=0.000663 ! Fit after self-cal, rms=0.114545Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114545Jy sigma=0.000663 ! Fit after self-cal, rms=0.114717Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.52 mas, bmaj=11.55 mas, bpa=1.52 degrees ! Estimated noise=3140.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251509 Jy ! Component: 100 - total flux cleaned = 0.00294903 Jy ! Component: 150 - total flux cleaned = 0.0032715 Jy ! Component: 200 - total flux cleaned = 0.00344707 Jy ! Total flux subtracted in 200 components = 0.00344707 Jy ! Clean residual min=-0.008622 max=0.007335 Jy/beam ! Clean residual mean=0.000024 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 0.448848 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.448848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114756Jy sigma=0.000662 ! Fit after self-cal, rms=0.114743Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.81153e-05 Jy ! Component: 100 - total flux cleaned = 0.000225861 Jy ! Component: 150 - total flux cleaned = 0.000336359 Jy ! Component: 200 - total flux cleaned = 0.000471466 Jy ! Total flux subtracted in 200 components = 0.000471466 Jy ! Clean residual min=-0.008531 max=0.007264 Jy/beam ! Clean residual mean=0.000024 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.44932 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 63 components and 0.44932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114747Jy sigma=0.000662 ! Fit after self-cal, rms=0.114739Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=7.829 mas, bpa=-7.66 degrees ! Estimated noise=2400.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.364 x 7.829 at -7.66 degrees (North through East) ! Clean map min=-0.0073426 max=0.42042 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.709 mas, bpa=-9.42 degrees ! Estimated noise=2798.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.324285 Jy ! Component: 100 - total flux cleaned = 0.399237 Jy ! Component: 150 - total flux cleaned = 0.428411 Jy ! Component: 200 - total flux cleaned = 0.442067 Jy ! Total flux subtracted in 200 components = 0.442067 Jy ! Clean residual min=-0.008214 max=0.008707 Jy/beam ! Clean residual mean=0.000008 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.442067 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.442067 Jy ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=7.829 mas, bpa=-7.66 degrees ! Estimated noise=2400.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631579 Jy ! Component: 100 - total flux cleaned = 0.0074534 Jy ! Component: 150 - total flux cleaned = 0.00839761 Jy ! Component: 200 - total flux cleaned = 0.00920215 Jy ! Total flux subtracted in 200 components = 0.00920215 Jy ! Clean residual min=-0.007609 max=0.005724 Jy/beam ! Clean residual mean=0.000012 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.451269 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.451269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.52 mas, bmaj=11.55 mas, bpa=1.52 degrees ! Estimated noise=3140.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356449 Jy ! Component: 100 - total flux cleaned = 0.000805883 Jy ! Component: 150 - total flux cleaned = 0.000978492 Jy ! Component: 200 - total flux cleaned = 0.00111435 Jy ! Total flux subtracted in 200 components = 0.00111435 Jy ! Clean residual min=-0.008263 max=0.007415 Jy/beam ! Clean residual mean=0.000021 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.452383 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156187 Jy ! Component: 100 - total flux cleaned = 0.000324143 Jy ! Component: 150 - total flux cleaned = 0.000442013 Jy ! Component: 200 - total flux cleaned = 0.000546792 Jy ! Total flux subtracted in 200 components = 0.000546792 Jy ! Clean residual min=-0.008169 max=0.007453 Jy/beam ! Clean residual mean=0.000020 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.45293 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 56 components and 0.45293 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=7.829 mas, bpa=-7.66 degrees ! Estimated noise=2400.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288789 Jy ! Component: 100 - total flux cleaned = 5.55707e-05 Jy ! Component: 150 - total flux cleaned = 0.000119995 Jy ! Component: 200 - total flux cleaned = 0.000119853 Jy ! Total flux subtracted in 200 components = 0.000119853 Jy ! Clean residual min=-0.007243 max=0.005843 Jy/beam ! Clean residual mean=0.000009 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.45305 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.45305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114434Jy sigma=0.000660 ! Fit after self-cal, rms=0.114434Jy sigma=0.000659 wmodel J0239-0234_S_2017_02_19_pus_map.mod ! Writing 74 model components to file: J0239-0234_S_2017_02_19_pus_map.mod wobs J0239-0234_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0239-0234_S_2017_02_19_pus_uvs.fits wwins J0239-0234_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0239-0234_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164844 Jy ! Component: 100 - total flux cleaned = -0.00183244 Jy ! Component: 150 - total flux cleaned = -0.00219882 Jy ! Component: 200 - total flux cleaned = -0.00263001 Jy ! Component: 250 - total flux cleaned = -0.00279437 Jy ! Component: 300 - total flux cleaned = -0.00295225 Jy ! Component: 350 - total flux cleaned = -0.0034054 Jy ! Component: 400 - total flux cleaned = -0.00369735 Jy ! Component: 450 - total flux cleaned = -0.0041244 Jy ! Component: 500 - total flux cleaned = -0.0046105 Jy ! Component: 550 - total flux cleaned = -0.00495147 Jy ! Component: 600 - total flux cleaned = -0.0054153 Jy ! Component: 650 - total flux cleaned = -0.00580372 Jy ! Component: 700 - total flux cleaned = -0.00599644 Jy ! Component: 750 - total flux cleaned = -0.00624734 Jy ! Component: 800 - total flux cleaned = -0.00643092 Jy ! Component: 850 - total flux cleaned = -0.00649127 Jy ! Component: 900 - total flux cleaned = -0.00643311 Jy ! Component: 950 - total flux cleaned = -0.00649177 Jy ! Component: 1000 - total flux cleaned = -0.00654801 Jy ! Component: 1050 - total flux cleaned = -0.00649153 Jy ! Component: 1100 - total flux cleaned = -0.00649151 Jy ! Component: 1150 - total flux cleaned = -0.0065999 Jy ! Component: 1200 - total flux cleaned = -0.0065986 Jy ! Component: 1250 - total flux cleaned = -0.00659877 Jy ! Component: 1300 - total flux cleaned = -0.00675391 Jy ! Component: 1350 - total flux cleaned = -0.00675383 Jy ! Component: 1400 - total flux cleaned = -0.006906 Jy ! Component: 1450 - total flux cleaned = -0.00705518 Jy ! Component: 1500 - total flux cleaned = -0.00725201 Jy ! Component: 1550 - total flux cleaned = -0.00720392 Jy ! Component: 1600 - total flux cleaned = -0.00739642 Jy ! Component: 1650 - total flux cleaned = -0.00763343 Jy ! Component: 1700 - total flux cleaned = -0.00772656 Jy ! Component: 1750 - total flux cleaned = -0.00763394 Jy ! Component: 1800 - total flux cleaned = -0.00781723 Jy ! Component: 1850 - total flux cleaned = -0.00790724 Jy ! Component: 1900 - total flux cleaned = -0.00786237 Jy ! Component: 1950 - total flux cleaned = -0.00795038 Jy ! Component: 2000 - total flux cleaned = -0.00803752 Jy ! Component: 2050 - total flux cleaned = -0.00816684 Jy ! Component: 2100 - total flux cleaned = -0.0081663 Jy ! Component: 2150 - total flux cleaned = -0.00812432 Jy ! Component: 2200 - total flux cleaned = -0.00812486 Jy ! Component: 2250 - total flux cleaned = -0.00829058 Jy ! Component: 2300 - total flux cleaned = -0.00820877 Jy ! Component: 2350 - total flux cleaned = -0.00837115 Jy ! Component: 2400 - total flux cleaned = -0.00829135 Jy ! Component: 2450 - total flux cleaned = -0.00837148 Jy ! Component: 2500 - total flux cleaned = -0.00848979 Jy ! Component: 2550 - total flux cleaned = -0.00860716 Jy ! Component: 2600 - total flux cleaned = -0.00864599 Jy ! Component: 2650 - total flux cleaned = -0.00872324 Jy ! Component: 2700 - total flux cleaned = -0.00879997 Jy ! Component: 2750 - total flux cleaned = -0.0089889 Jy ! Component: 2800 - total flux cleaned = -0.00902588 Jy ! Component: 2850 - total flux cleaned = -0.00910007 Jy ! Component: 2900 - total flux cleaned = -0.00917409 Jy ! Component: 2950 - total flux cleaned = -0.00928414 Jy ! Component: 3000 - total flux cleaned = -0.00924796 Jy ! Component: 3050 - total flux cleaned = -0.00950048 Jy ! Component: 3100 - total flux cleaned = -0.00953652 Jy ! Component: 3150 - total flux cleaned = -0.00957229 Jy ! Component: 3200 - total flux cleaned = -0.00978438 Jy ! Component: 3250 - total flux cleaned = -0.00978418 Jy ! Component: 3300 - total flux cleaned = -0.00992406 Jy ! Component: 3350 - total flux cleaned = -0.0100278 Jy ! Component: 3400 - total flux cleaned = -0.0101998 Jy ! Component: 3450 - total flux cleaned = -0.0101657 Jy ! Component: 3500 - total flux cleaned = -0.0102674 Jy ! Component: 3550 - total flux cleaned = -0.0103683 Jy ! Component: 3600 - total flux cleaned = -0.0103682 Jy ! Component: 3650 - total flux cleaned = -0.0103349 Jy ! Component: 3700 - total flux cleaned = -0.0104343 Jy ! Component: 3750 - total flux cleaned = -0.0104674 Jy ! Component: 3800 - total flux cleaned = -0.0103694 Jy ! Component: 3850 - total flux cleaned = -0.0104022 Jy ! Component: 3900 - total flux cleaned = -0.01037 Jy ! Component: 3950 - total flux cleaned = -0.0104669 Jy ! Component: 4000 - total flux cleaned = -0.0104027 Jy ! Component: 4050 - total flux cleaned = -0.0104025 Jy ! Total flux subtracted in 4096 components = -0.0103708 Jy ! Clean residual min=-0.002002 max=0.002012 Jy/beam ! Clean residual mean=0.000004 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.442679 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 378 components and 0.442679 Jy ![Exited script file: muppet] wmap "J0239-0234_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.364 x 7.829 at -7.66 degrees (North through East) ! Clean map min=-0.0056689 max=0.41882 Jy/beam ! Writing clean map to FITS file: J0239-0234_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.418815 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000578942 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.4147 0.4147 0.8294 1.6588 3.3176 6.6352 13.2704 26.5408 53.0816 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.418 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.364 x 7.829 at -7.66 degrees (North through East) ! Clean map min=-0.0056689 max=0.41882 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0239-0234_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:40:12 2019