! Started logfile: J0239-0234_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:02:17 2019 obs J0239-0234_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0239-0234_S_2017_01_16_pus_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.496444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0239-0234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 4468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0239-0234_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.577155Jy sigma=0.003857 ! Fit after self-cal, rms=0.571002Jy sigma=0.003823 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=9.205 mas, bpa=17.98 degrees ! Estimated noise=2140.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.362924 Jy ! Component: 100 - total flux cleaned = 0.442116 Jy ! Total flux subtracted in 100 components = 0.442116 Jy ! Clean residual min=-0.017351 max=0.023094 Jy/beam ! Clean residual mean=-0.000023 rms=0.004922 Jy/beam ! Combined flux in latest and established models = 0.442116 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.442116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170592Jy sigma=0.000922 ! Fit after self-cal, rms=0.170600Jy sigma=0.000922 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.464 mas, bmaj=11.06 mas, bpa=19.79 degrees ! Estimated noise=1671.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018492 Jy ! Component: 100 - total flux cleaned = 0.0230891 Jy ! Component: 150 - total flux cleaned = 0.0239424 Jy ! Component: 200 - total flux cleaned = 0.0241495 Jy ! Total flux subtracted in 200 components = 0.0241495 Jy ! Clean residual min=-0.014628 max=0.018969 Jy/beam ! Clean residual mean=-0.000025 rms=0.004310 Jy/beam ! Combined flux in latest and established models = 0.466265 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.466265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168912Jy sigma=0.000898 ! Fit after self-cal, rms=0.168917Jy sigma=0.000898 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 0.95 KP 0.98 ! LA 1.04 MK 1.00* NL 0.92 OV 0.93 ! PT 1.09 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.03 KP 0.94 ! LA 1.00 MK 1.00* NL 1.04 OV 0.97 ! PT 1.10 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 1.01 KP 0.96 ! LA 1.02 MK 1.00* NL 1.04 OV 0.91 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.88 KP 1.00* ! LA 0.93 MK 1.00* NL 1.00* OV 0.91 ! PT 1.08 SC 1.58 ! ! ! Fit before self-cal, rms=0.168917Jy sigma=0.000898 ! Fit after self-cal, rms=0.176681Jy sigma=0.000854 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.45 mas, bmaj=11.02 mas, bpa=19.5 degrees ! Estimated noise=1652.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210411 Jy ! Component: 100 - total flux cleaned = -0.0024622 Jy ! Component: 150 - total flux cleaned = -0.00286371 Jy ! Component: 200 - total flux cleaned = -0.00320637 Jy ! Total flux subtracted in 200 components = -0.00320637 Jy ! Clean residual min=-0.012334 max=0.016873 Jy/beam ! Clean residual mean=-0.000049 rms=0.003696 Jy/beam ! Combined flux in latest and established models = 0.463059 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.463059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176406Jy sigma=0.000853 ! Fit after self-cal, rms=0.176605Jy sigma=0.000853 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176605Jy sigma=0.000853 ! Fit after self-cal, rms=0.159732Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.478 mas, bmaj=10.9 mas, bpa=19.56 degrees ! Estimated noise=1652.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430793 Jy ! Component: 100 - total flux cleaned = 0.00432701 Jy ! Component: 150 - total flux cleaned = 0.00423063 Jy ! Component: 200 - total flux cleaned = 0.00414697 Jy ! Total flux subtracted in 200 components = 0.00414697 Jy ! Clean residual min=-0.004909 max=0.005335 Jy/beam ! Clean residual mean=-0.000034 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.467206 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.467206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159527Jy sigma=0.000673 ! Fit after self-cal, rms=0.159995Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395479 Jy ! Component: 100 - total flux cleaned = 0.000188216 Jy ! Component: 150 - total flux cleaned = 0.000186338 Jy ! Component: 200 - total flux cleaned = 0.000182935 Jy ! Total flux subtracted in 200 components = 0.000182935 Jy ! Clean residual min=-0.004875 max=0.005117 Jy/beam ! Clean residual mean=-0.000034 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.467389 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.467389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159945Jy sigma=0.000672 ! Fit after self-cal, rms=0.159945Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159945Jy sigma=0.000672 ! Fit after self-cal, rms=0.162255Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.473 mas, bmaj=10.86 mas, bpa=19.55 degrees ! Estimated noise=1652.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219616 Jy ! Component: 100 - total flux cleaned = 0.00281504 Jy ! Component: 150 - total flux cleaned = 0.00294084 Jy ! Component: 200 - total flux cleaned = 0.00297979 Jy ! Total flux subtracted in 200 components = 0.00297979 Jy ! Clean residual min=-0.003334 max=0.003821 Jy/beam ! Clean residual mean=0.000010 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.470369 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.470369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162220Jy sigma=0.000650 ! Fit after self-cal, rms=0.162286Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199589 Jy ! Component: 100 - total flux cleaned = 0.000133861 Jy ! Component: 150 - total flux cleaned = 0.000133422 Jy ! Component: 200 - total flux cleaned = 0.000157721 Jy ! Total flux subtracted in 200 components = 0.000157721 Jy ! Clean residual min=-0.003257 max=0.003715 Jy/beam ! Clean residual mean=0.000010 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.470526 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.470526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162281Jy sigma=0.000650 ! Fit after self-cal, rms=0.162280Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162280Jy sigma=0.000650 ! Fit after self-cal, rms=0.162397Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.271 mas, bmaj=13.12 mas, bpa=11.61 degrees ! Estimated noise=1906.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168607 Jy ! Component: 100 - total flux cleaned = 0.00210856 Jy ! Component: 150 - total flux cleaned = 0.00214914 Jy ! Component: 200 - total flux cleaned = 0.00218555 Jy ! Total flux subtracted in 200 components = 0.00218555 Jy ! Clean residual min=-0.003669 max=0.003603 Jy/beam ! Clean residual mean=0.000014 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.472712 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 75 components and 0.472712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162374Jy sigma=0.000650 ! Fit after self-cal, rms=0.162381Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282189 Jy ! Component: 100 - total flux cleaned = 0.000230887 Jy ! Component: 150 - total flux cleaned = 0.000202538 Jy ! Component: 200 - total flux cleaned = 0.000178504 Jy ! Total flux subtracted in 200 components = 0.000178504 Jy ! Clean residual min=-0.003632 max=0.003612 Jy/beam ! Clean residual mean=0.000014 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.47289 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.47289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162376Jy sigma=0.000650 ! Fit after self-cal, rms=0.162378Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=10.85 mas, bpa=19.55 degrees ! Estimated noise=1653.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.47 x 10.85 at 19.55 degrees (North through East) ! Clean map min=-0.0031901 max=0.45485 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=9.023 mas, bpa=17.55 degrees ! Estimated noise=2098.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.3556 Jy ! Component: 100 - total flux cleaned = 0.433278 Jy ! Component: 150 - total flux cleaned = 0.454509 Jy ! Component: 200 - total flux cleaned = 0.46328 Jy ! Total flux subtracted in 200 components = 0.46328 Jy ! Clean residual min=-0.004785 max=0.004684 Jy/beam ! Clean residual mean=0.000010 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.46328 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.46328 Jy ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=10.85 mas, bpa=19.55 degrees ! Estimated noise=1653.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054401 Jy ! Component: 100 - total flux cleaned = 0.00717978 Jy ! Component: 150 - total flux cleaned = 0.00853859 Jy ! Component: 200 - total flux cleaned = 0.00980532 Jy ! Total flux subtracted in 200 components = 0.00980532 Jy ! Clean residual min=-0.003513 max=0.003492 Jy/beam ! Clean residual mean=0.000010 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.473085 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 0.473085 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.271 mas, bmaj=13.12 mas, bpa=11.61 degrees ! Estimated noise=1906.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000983793 Jy ! Component: 100 - total flux cleaned = 0.00141968 Jy ! Component: 150 - total flux cleaned = 0.00178175 Jy ! Component: 200 - total flux cleaned = 0.0019584 Jy ! Total flux subtracted in 200 components = 0.0019584 Jy ! Clean residual min=-0.003326 max=0.003551 Jy/beam ! Clean residual mean=0.000017 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.475044 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117718 Jy ! Component: 100 - total flux cleaned = 0.00022247 Jy ! Component: 150 - total flux cleaned = 0.000316505 Jy ! Component: 200 - total flux cleaned = 0.000374474 Jy ! Total flux subtracted in 200 components = 0.000374474 Jy ! Clean residual min=-0.003389 max=0.003571 Jy/beam ! Clean residual mean=0.000017 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.475418 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 70 components and 0.475418 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.47 mas, bmaj=10.85 mas, bpa=19.55 degrees ! Estimated noise=1653.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033575 Jy ! Component: 100 - total flux cleaned = 0.000445518 Jy ! Component: 150 - total flux cleaned = 0.000448063 Jy ! Component: 200 - total flux cleaned = 0.000541296 Jy ! Total flux subtracted in 200 components = 0.000541296 Jy ! Clean residual min=-0.003435 max=0.003537 Jy/beam ! Clean residual mean=0.000011 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.475959 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.475959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162369Jy sigma=0.000649 ! Fit after self-cal, rms=0.162337Jy sigma=0.000649 wmodel J0239-0234_S_2017_01_16_pus_map.mod ! Writing 85 model components to file: J0239-0234_S_2017_01_16_pus_map.mod wobs J0239-0234_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0239-0234_S_2017_01_16_pus_uvs.fits wwins J0239-0234_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0239-0234_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265938 Jy ! Component: 100 - total flux cleaned = -0.000810954 Jy ! Component: 150 - total flux cleaned = -0.00115621 Jy ! Component: 200 - total flux cleaned = -0.00132124 Jy ! Component: 250 - total flux cleaned = -0.00142811 Jy ! Component: 300 - total flux cleaned = -0.00147968 Jy ! Component: 350 - total flux cleaned = -0.00157966 Jy ! Component: 400 - total flux cleaned = -0.00148103 Jy ! Component: 450 - total flux cleaned = -0.0015773 Jy ! Component: 500 - total flux cleaned = -0.00153016 Jy ! Component: 550 - total flux cleaned = -0.00148403 Jy ! Component: 600 - total flux cleaned = -0.0013924 Jy ! Component: 650 - total flux cleaned = -0.00134676 Jy ! Component: 700 - total flux cleaned = -0.00116676 Jy ! Component: 750 - total flux cleaned = -0.000901316 Jy ! Component: 800 - total flux cleaned = -0.000944489 Jy ! Component: 850 - total flux cleaned = -0.000728497 Jy ! Component: 900 - total flux cleaned = -0.000643579 Jy ! Component: 950 - total flux cleaned = -0.000600545 Jy ! Component: 1000 - total flux cleaned = -0.000350977 Jy ! Component: 1050 - total flux cleaned = -0.000350874 Jy ! Component: 1100 - total flux cleaned = -0.0002288 Jy ! Component: 1150 - total flux cleaned = -0.00014834 Jy ! Component: 1200 - total flux cleaned = 9.06242e-05 Jy ! Component: 1250 - total flux cleaned = 0.000287626 Jy ! Component: 1300 - total flux cleaned = 0.000404468 Jy ! Component: 1350 - total flux cleaned = 0.000520857 Jy ! Component: 1400 - total flux cleaned = 0.000788806 Jy ! Component: 1450 - total flux cleaned = 0.000978757 Jy ! Component: 1500 - total flux cleaned = 0.00127826 Jy ! Component: 1550 - total flux cleaned = 0.00146394 Jy ! Component: 1600 - total flux cleaned = 0.00168513 Jy ! Component: 1650 - total flux cleaned = 0.00194113 Jy ! Component: 1700 - total flux cleaned = 0.00219505 Jy ! Component: 1750 - total flux cleaned = 0.00226709 Jy ! Component: 1800 - total flux cleaned = 0.00258775 Jy ! Component: 1850 - total flux cleaned = 0.00269376 Jy ! Component: 1900 - total flux cleaned = 0.00286876 Jy ! Component: 1950 - total flux cleaned = 0.00304278 Jy ! Component: 2000 - total flux cleaned = 0.00321548 Jy ! Component: 2050 - total flux cleaned = 0.00345563 Jy ! Component: 2100 - total flux cleaned = 0.0036262 Jy ! Component: 2150 - total flux cleaned = 0.00379564 Jy ! Component: 2200 - total flux cleaned = 0.00399734 Jy ! Component: 2250 - total flux cleaned = 0.00413091 Jy ! Component: 2300 - total flux cleaned = 0.00439585 Jy ! Component: 2350 - total flux cleaned = 0.00462589 Jy ! Component: 2400 - total flux cleaned = 0.0048214 Jy ! Component: 2450 - total flux cleaned = 0.00488654 Jy ! Component: 2500 - total flux cleaned = 0.00511185 Jy ! Component: 2550 - total flux cleaned = 0.00514419 Jy ! Component: 2600 - total flux cleaned = 0.00543041 Jy ! Component: 2650 - total flux cleaned = 0.00552519 Jy ! Component: 2700 - total flux cleaned = 0.00568194 Jy ! Component: 2750 - total flux cleaned = 0.00568216 Jy ! Component: 2800 - total flux cleaned = 0.00571347 Jy ! Component: 2850 - total flux cleaned = 0.00577544 Jy ! Component: 2900 - total flux cleaned = 0.00602054 Jy ! Component: 2950 - total flux cleaned = 0.00602031 Jy ! Component: 3000 - total flux cleaned = 0.00608123 Jy ! Component: 3050 - total flux cleaned = 0.00608109 Jy ! Component: 3100 - total flux cleaned = 0.0061409 Jy ! Component: 3150 - total flux cleaned = 0.00605132 Jy ! Component: 3200 - total flux cleaned = 0.00608105 Jy ! Component: 3250 - total flux cleaned = 0.00619893 Jy ! Component: 3300 - total flux cleaned = 0.00622819 Jy ! Component: 3350 - total flux cleaned = 0.0061411 Jy ! Component: 3400 - total flux cleaned = 0.00628594 Jy ! Component: 3450 - total flux cleaned = 0.00625732 Jy ! Component: 3500 - total flux cleaned = 0.006372 Jy ! Component: 3550 - total flux cleaned = 0.00640032 Jy ! Component: 3600 - total flux cleaned = 0.00634371 Jy ! Component: 3650 - total flux cleaned = 0.00654118 Jy ! Component: 3700 - total flux cleaned = 0.00642882 Jy ! Component: 3750 - total flux cleaned = 0.00656855 Jy ! Component: 3800 - total flux cleaned = 0.00665165 Jy ! Component: 3850 - total flux cleaned = 0.00670686 Jy ! Component: 3900 - total flux cleaned = 0.00676196 Jy ! Component: 3950 - total flux cleaned = 0.0067347 Jy ! Component: 4000 - total flux cleaned = 0.00676195 Jy ! Component: 4050 - total flux cleaned = 0.00687051 Jy ! Total flux subtracted in 4096 components = 0.00687055 Jy ! Clean residual min=-0.001681 max=0.001607 Jy/beam ! Clean residual mean=0.000010 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.48283 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 412 components and 0.48283 Jy ![Exited script file: muppet] wmap "J0239-0234_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.47 x 10.85 at 19.55 degrees (North through East) ! Clean map min=-0.0035032 max=0.45392 Jy/beam ! Writing clean map to FITS file: J0239-0234_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.453925 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000557021 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.368137 0.368137 0.736274 1.47255 2.94509 5.89019 11.7804 23.5608 47.1215 94.243 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.453 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.47 x 10.85 at 19.55 degrees (North through East) ! Clean map min=-0.0035032 max=0.45392 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0239-0234_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:02:22 2019